Availability
Showing In Stock Items. Show All 33 Items.
Our Summit Racing™ 3 ton steel low profile floor jacks can fit under vehicles that other jacks cannot. Their low profile construction can go as low as 3.3" and are built to withstand the demands of professional shop use. They feature a dual piston design with quick lift pump action, and are constructed from high-grade steel with a powder coated finish and ball bearing rear casters for superior mobility across your workshop or garage floor. Buy with confidence knowing that these jacks have been tested to meet ASME PASE-2019 US safety standards.
( 5 )
$179.99
Ranger 1 1/2 ton Low Rider super-long jacks have a low profile and a long reach. With their amazing 34 in. long chassis and lowered height of 2 3/4 in., you will have no trouble reaching the factory-approved jacking points on most low ground-clearance vehicles. Their 3,000 lb. capacity is enhanced with an accurate direct-drive pump operation, making them the perfect combination of power and precision to accomplish much in your garage. Built to last from durable heavy steel, Ranger Low Rider super-long jacks offer a long lifting life that won't let you down. Other features include: * Swivel casters for easy mobility * Double-sealed hydraulics to prevent contamination * Safety overload system * Flanged side plates for increased strength
( 7 )
$575.00
Ranger 3 ton heavy-duty Low Rider jacks are low-profile and built solid from durable heavy steel with flanged side plates for increased strength and an emergency overload system for safety. Plus, with their quick-pump feature, lifting speed is faster! When you need to get under a hefty ground-hugger or another heavy job, wheel out Ranger 3 ton heavy-duty Low Rider jacks--they won't let you down! Other features include: * Swivel casters for easy mobility * Universal-joint pressure release system * Roller-cam dual plunger pump assembly * Double-sealed hydraulics for longer service life * Sealed hydraulic unit prevents contamination
( 2 )
$476.00
OEM Automotive Tools low-profile floor jacks are built for efficiency and performance. Available in models capable of lifting 2 tons or 3 1/4 tons with minimal effort, they will be valuable additions to your garage or workshop for increased productivity. Both professional quality models are equipped with 360 degree rear swivel casters and padded handles, so you can quickly and easily position the jacks in any application, especially low-clearance vehicles, without scratching or denting vehicle while pumping jack. OEM Automotive Tools low-profile floor jacks meet ASME 2014 standards.
Not Yet Reviewed
$549.00
—
$599.00
Powerbuilt Professional floor jacks are dependable, innovative, and affordable. Need to do a few repairs under your car? No worries. Powerbuilt Professional jacks are built with a strong, heavy-duty, flanged steel frames and are available in capacities and lifting heights to raise your repairs safely and securely. They also offer low-profile models for cars too low for regular jacks. Features include: * Long handle for added reach * Precision 360 degree rear swivel casters allows easy maneuvering * Durable gear-drive or U-joint release valve (depending on model) * Meets or exceeds ASME and PALD standards * One-year warranty
( 5 )
$266.99
—
$279.99
OTC's air-assisted high-lift transmission jacks are perfect for those applications with a clearance problem--the low height of these jacks is 41.500 in. The jacks have a weight capacity of one full ton, and are designed with a metered foot-operated air pump. This allows each transmission to be effortlessly lifted into place, precisely controlling the load during removal and installation. A safety bypass prevents damage caused by a system overload.
Not Yet Reviewed
$4,163.99
On Sale
EMAX Industrial Plus Silent Air piston compressors are quiet. The most common complaints about compressors are their high noise levels. EMAX Silent Air units not only still the noise, but they also do it with a big cfm output and lower rpm. Featuring their Whisper 100 system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling intake air through a series of baffle plates and prefilter media inside the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer structure; plus, it also provides secondary filtration for cleaner air. Industrial Plus Silent Air piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with a built-in fan. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. All EMAX Industrial Plus compressors have low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Their 15 Service Factor means the motors can be pulled 15 percent over full load. Depending on the application, many Silent Air piston compressors feature totally enclosed, fan-cooled (TEFC) motors that keep harmful dust and particulates out of the motor. This allows them to be used in dusty commercial and industrial environments without worrying about maintenance. They have 100 percent copper windings with pre-wired magnetic starters (necessary on any motor over 15 amps). These are high-quality, name brand, premium efficiency motors that meet all UL and CSA requirements. Some lower horsepower models are equipped with name brand, open-drip (OPD) motors. The running and starting windings on these motors are all 100 percent copper-wound for premium efficiency, reliable performance, and durability. These units also meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Plus Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * Raised-pump mounting platforms that open the underside of the crankcase to cooling air flow * Automatic belt tensioners for much easier and quicker adjustments and alignment * Selectable continuous-run or automatic start/stop operation to maximize performance and reduce wear * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Dual-timer automatic tank drains eliminate maintenance * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings
( 16 )
$3,707.88
—
$7,204.82
$3,522.49
—
$6,844.58
B-G Racing Formula Quick Lift jacks are available in either a small reach or long reach model. Both are engineered and manufactured with durability and ease of use in mind, and are suitable for a wide range of vehicles. These jacks feature a very low closed height and are designed to locate beneath the differential and front or rear chassis members, raising the car to a fixed height in one single swift movement. A safety locking device on both jack models is easy to use, ensuring the handle cannot be raised unless intended. Order the model to best suit your application. Features for small reach and long reach B-G Racing Formula Quick Lift jacks include: * Produced from high-grade mild steel * Includes an extra-long ergonomic handle for excellent leverage, with a yellow tip to enhance visibility * Nylon wheels allow easy maneuverability * Both jack models are available in a choice of gray or red powdercoat finish for longevity
( 2 )
$316.00
B-G Racing Track Saloon Quick Lift jacks feature an extra support leg, extended handle holder, and handle, enabling them to lift a higher load capacity than the Formula Quick Lift jack models. Engineered and manufactured with durability and ease of use in mind, these jacks are suitable for a wide range of vehicles. The Track Saloon Quick Lift jacks feature a very low closed height and are designed to locate beneath the differential and front or rear chassis members, raising the car to a fixed height in one swift movement. A safety locking device is easy to use, ensuring that the handle cannot be raised unless intended. Features and design details of B-G Racing Track Saloon Quick Lift jacks include: * Produced from high-grade mild steel * Includes an extra-long ergonomic handle for excellent leverage with a yellow tip to enhance visibility * Nylon wheels for easy maneuverability * Available in gray or red powdercoat finish for longevity
( 4 )
$343.00
B-G Racing Rally Quick Lift jacks feature an extra support leg, extended handle holder and handle—enabling them to lift a higher load capacity the Formula Quick Lift jack models. Engineered and manufactured with durability and ease of use in mind, these jacks are suitable for a wide range of vehicles. The Rally Quick Lift jacks have a very low closed height and are designed to locate beneath the differential and front or rear chassis members, raising the car to a fixed height in one swift movement. They also feature a simple safety locking device, ensuring the handle cannot be raised unless intended. Features and design details of Rally Quick Lift jack models: * Produced from high-grade mild steel * Includes an extra-long ergonomic handle for excellent leverage, with a yellow tip to enhance visibility * Nylon wheels to allow easy maneuverability * Available in gray or red powdercoat finish for longevity
( 2 )
$378.00
OTC's Powertrain lifts feature a sliding split tabletop design that allows for separation of engine and transmission assembly or hybrid engine/generator module, making service easier. The lifts unique design also helps handle removal and installation of electric vehicle batteries, fuel tanks, suspension systems and other powertrain assemblies. A generous ground clearance allows for floor crane access, while a low collapsed height aids in servicing large components while still on the lift. The table is designed to tilt to help properly align components to the vehicle during installation and the threaded holes in the tabletop will accommodate future adapters and powertrains.
Not Yet Reviewed
$10,134.99
On Sale
Offering the same quality and durability as their Industrial Plus Series (without the extra cost of some features), EMAX Industrial Silent Air piston compressors are quiet. One of the most common complaints about compressors is noise. EMAX Silent Air units not only quiet the noise, they also do it with big cfm output and lower rpm. Featuring their Whisper silent air system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling the intake air through a series of baffle plates and prefilter media within the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer; plus, it provides secondary filtration for cleaner air. Industrial Silent Air compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with built-in fans. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. Industrial Silent Air compressors have name brand, open-drip (OPD), low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Running and starting windings are all copper-wound for premium efficiency, reliable performance, and durability. Their 15 Service Factor means the motors can be pulled 15 percent over full load. These motors meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings
( 1 )
$2,647.88
—
$4,131.88
$2,515.49
—
$3,925.29
On Sale
Offering the same quality and durability as their Industrial Plus Series (without the extra cost of some features), EMAX Industrial piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with built-in fans. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. Industrial Series compressors have name brand, open-drip (OPD), low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. With low harmonic distortion, these motors provide much higher torque in cold weather starting, and require less electricity to start. Other features include large starting and running capacitors, and dynamically balanced armatures. Running and starting windings are all copper-wound for premium efficiency, reliable performance, and durability. These motors meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX uses only taper-lock style, 2-groove pulleys with dual 2-groove, B-style belts to drive their pumps. Dual belts ensure long belt life with low vibration for smoother, quieter operation because dual belts do not have to be as tight as a single belt. Tighter belts put more load on the compressor pump and the motor bearings; that decreases the life of both. Much better than a fixed bore pulley with a set screw; the taper-lock design locks the pulley in position on the motor shaft preventing it from loosening or moving. EMAX piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * OSHA-approved, 13-gauge steel, expanded metal belt guards * ASME code-compliant tanks * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings * Big 1 3/8 in. output shafts * 15 Service Factor motors can be pulled 15 percent over full load
( 2 )
$3,283.88
—
$9,792.28
$3,119.69
—
$9,302.67
OTC 4-Ton capacity forklift jacks feature a low starting height of 2 5/8 in. and a maximum lifting height of 16 1/4 inches. The 2-position lift pad permits handling of all lift truck configurations with flat or edged surfaces. These forklift jacks feature high-quality seals, high-strength steel construction, and a 30 in. long handle, with stop, that makes for easy maneuverability around the shop or workspace. Quality and value are at the core of OTC products.
Not Yet Reviewed
$839.99
Ideal for workshop pits due to low minimum height and long stroke, the AC Hydraulic VLT12 transmission jacks combine the convenience and safety features to ensure a positive and safe experience for operators. The VLT12 transmission jacks are engineered especially for lifting heavy truck transmissions and are equipped with hard chromium plated rams and a high-quality strength steel frame to offer a long product lifecycle. VLT12 transmission jack features: * Hard chromium plated rams and high-quality strength steel frame guarantees a long product lifecycle * Pedal operated pump with built-in quick lift leaving both hands free for working * Precise adjustment for positioning of transmission * High-quality galvanized support saddle base frame * Built-in safety valve and hand operated dead man's release for optimum safety whilst lifting and lowering * High-quality hydraulic unit secures rapid and precise lifting of fuel tanks, transmissions, exhaust pipes, etc. * Sturdy swivel castors (2 lockable) for optimum stability and maneuverability
Not Yet Reviewed
$1,912.00
JET toe jacks are a versatile tool for any shop. The hydraulic bottle jack has a special lifting surface that allows you to raise equipment with either low or high clearances. The jack can be used as a standard bottle jack, if your piece of equipment is high enough. If not, move to the lower toe to lift something close to the ground. With JET toe jacks, there is no need to try and lift something enough to get a jack underneath.
Not Yet Reviewed
$598.99
OTC Tools' forklift jacks are designed with features like a low starting height, two-position lift pad, and a long handle for easy maneuverability, making them well-suited for various forklift configurations and workspace environments. For the right tools for the job, make OTC your #1 source. Key features include: * High-quality seals, chrome-plated internal components, and high-strength steel construction * Unique shape of primary saddle allows for handling of all lift truck configurations with flat or edged surfaces * Long handle stop makes for easy maneuverability * Complies with ASME-PALD * Secondary lifting surface feature * Stable base
Not Yet Reviewed
$2,642.99
BendPak Elite air compressors are high-quality air compressors that deliver proven longevity in the most demanding conditions. Because they run at a slower rpm than most comparable units, they are quieter, run cooler, and cost less to operate. The 100 percent cast iron pumps provide the quality and performance needed for heavy-use applications, like automotive and body repair to manufacturing and industrial service. The 2-stage, twin piston pumps feature splash lubrication for total reliability and a finned cylinder configuration that provides 360 degree cooling. The compressors' heavy-duty, disc-type valves are dependable and accessible without having to remove the cylinder head or perform other complicated valve maintenance procedures. A built-in intercooler and an air-cooled aftercooler chills the air resulting in reduced heat and condensation moisture. BendPak Elite Air Compressors feature: * Extra-quiet low RPM pumps * Cast-iron pump and heads * Splash lubrication * Dual belt drive for less load on bearings * Fully enclosed belt guard * ASME rated tank * Large surface area, cooling fins, and forced-air aftercooler * Oversized ductile iron crankshaft * Tapered roller main bearings * Precision balanced flywheel * Magnetic starter * Cast iron oil reservoir with large oil drain and sight gauge glass
Not Yet Reviewed
$4,395.00
On Sale
Save that energy! When a motor starts at full load voltage it causes a voltage sag on the power system and can cause shock damage creating long-term damage to your motor. EMAX energy-efficient direct-drive rotary screw air compressors have variable frequency drives installed allowing a savings of 25 to 70 percent energy. EMAX energy-efficient direct-drive rotary screw air compressors are built to exacting standards, providing years of dependable service under demanding conditions. And because they use only high-quality OEM components, they offer a full 10-year warranty on the rotary screw pump and a 5-year warranty on the motor and all other components with the purchase of their oil and filters to ensure the correct oil with the specs needed is used for optimal operation. The heart of these compressors are the air ends—the part of the machine that actually compresses the air. EMAX uses only the best German and Finnish name brand air ends that are good for up to 70,000 running hours with only routine maintenance and the correct oil. Also, EMAX uses only premium, high-efficiency industrial motors to run the compressors delivering units with higher service factors, longer bearing lives, lower waste- heat output and less vibration. EMAX direct-drive rotary screw air compressors offer a lot of functionality, including a user-friendly Logika Programmable Logic Controller (PLC) that makes the units bulletproof, and allows easy, intuitive scheduling and operation of the compressor. Key features and benefits: * Ultra-quiet rotary screw operation -- Delivers enhanced reliability with ultimate energy efficiency -- Drive-Tek reduces energy demand up to 33 percent for huge savings -- Continuous 100 percent duty cycle operates at normal conversation level * Premium Industrial TEFC direct-drive motor -- Runs at 1,750 rpm for less wear and tear -- No belt maintenance and longer bearing life for worry-free performance * Variable speed soft start -- Reduces energy demand and amp draw on startup -- Creates less heat to increase compressors lifetime * Precision-engineered rotary air end -- Highly efficient design provides maximum discharge * Advanced Programmable Logistic Controller (PLC) -- Easy-to-use remote with timed start/stop and low oil shutdown -- Monitors maintenance, temperature, oil level, filtration, hours, and much more * Heavy-duty sound attenuated cabinet -- Offers lower decibel rating with easy access to critical components -- Designed for use with stationary air receiver (not included) -- Air receivers can be purchased separately to meet your specific needs * Spin-Tek -- Unique tool-less oil filters and air/oil separators -- Genuine Mann filters reduce air end contamination and harmful elements
Not Yet Reviewed
$38,691.06
—
$84,457.62
$36,756.51
—
$80,234.74
On Sale
EMAX Industrial Plus gas-powered piston compressors deliver overwhelming performance to meet the needs of the most demanding environments. Their pumps require less maintenance, service, and downtime—and all EMAX gas-powered compressors furnish the power needed at the jobsite, garage, or shop. These units have ASME-approved air receivers and custom-built engine stands that brace the platform of the tank, allow easy belt tightening, and significantly reduce vibration. Many competitors' pumps run at double the rpm of EMAX pumps because they are much smaller and must run fast to produce enough air. EMAX Industrial Plus pumps have solid cast iron cylinders, cylinder heads, crankcases, flywheels, crankshafts, and rebuildable, forged steel connecting rods. They have large roller bearings on the crankshaft ends for stability and long bearing life. Disc intake and exhaust valves are sealed by O-rings and can be removed without disturbing the head gaskets. When it came to engines, the obvious choice for EMAX was the Honda GX Series with electric starters. Their OHV design provides excellent torque and fuel efficiency, quiet operation, and they're easy-to-use. Built for efficient airflow, effective cooling, and durability, with a slant cylinder design for smooth running—they feature mufflers with spark arresters, hydraulic valve lifters, low oil shutdown, automatic compression releases for easy starting, key switches, and battery chargers. EMAX's Honda GX engines also have engine idle-down (when the compressor is in free-wheel mode) and, with electronic ignition, excellent cold weather starting ability. Additional features of EMAX Industrial Plus gas-powered piston compressors include: * 1/4 in. ball valve drain at the front of the tank for easy access * Quality tank gauge; all safety valves and pop-offs are ASME-approved * 3/4 in. ball valve air outlet * Custom-built, heavy-duty 13-gauge expanded metal belt guard * 35 percent lower operating temperatures—reduces moisture buildup and extends pump life * Air-Stream technology provides up to 50 percent longer pump life * Intercooler and aftercooler lines to cool the air between stages and after the 2nd stage (where applicable) * Raised platforms pull air under the pumps * "V" or "W" pump shapes help eliminate hotspots and provide consistent cooling * Site glass to view oil level * Twin belts offer better belt grip and longer belt life * Head unloaders allow for load-less starting and help cool the pump in high-duty cycle applications * Pre-tested before they leave the factory * Just add a 12 V battery and battery cables and they're ready to go
Not Yet Reviewed
$4,554.82
—
$7,416.82
$4,327.08
—
$7,045.98
On Sale
EMAX rotary screw compressors distribute the quietest, most dependable air technology with programmable control! Utilizing innovative product design, the highest quality components, and professional workmanship, EMAX compressors provide you with the features you want and the energy efficiency you need, backed by one of the best warranties in the industry. EMAX energy-efficient rotary-screw air compressor features: * State-of-the-art screw air ends have precision-aligned, back-to-back, tapped roller bearings with close tolerances to guarantee long life cycles and outstanding reliability * Each air end is tested to meet consistent high-quality standards * Premium industrial high-efficiency motors constructed with superior materials, higher service factors, longer bearing lives, lower waste-heat output, and less vibration * Drive-Tek design reduces energy demand up to 33 percent * Variable speed soft-start motors provide reduced energy demand and amp-draw on start-up * Spin-Tek design offers unique, easy access to oil filters and air/oil separators—requires no tools to remove/install, saving you time and money * Heavy-duty sound attenuated cabinet provides lower decibel operation than a typical rotary screw * Programmable logistic controller—user-friendly Logika PLC features variable speed control, adjustable pressure range, low oil shutdown, reverse fault, high-voltage fault, over-amp shutdown, hour meter, fault history, maintenance service schedule, air differential control, built-in timer, on-line demand, self-start, and master slave; plus clock and date settings, daily/weekly scheduling, and a built-in light.
Not Yet Reviewed
$8,438.66
—
$15,474.94
$8,016.73
—
$14,701.19
If you're looking for a high-strength floor jack that can lift everything from low-riding sports cars to SUVs and pick-ups, then Sunex Tools has you covered with the 2 ton Lowrider service jacks. Their low-profile design is consistent throughout the entire 18 in. chassis, allowing full reach beyond pinch welds--and with rapid-rise technology, it takes only 6 1/2 quick pumps to reach the 24 in. maximum height. Sunex Tools 2 ton Lowrider service jacks are built with rollers on the front and swivel wheels on the rear for easy maneuverability.
( 44 )
$378.99
MaxJax reclining creeper seats are a must-have for your MaxJax portable car lift! These super-plush, adjustable creeper seats easily converts from a low-profile creeper to a comfortable work seat. You'll be able to go from a 2.5 in. low-profile creeper to a fully reclined work seat in mere seconds. And, because you'll be seated in an upright position, these creeper seats provide an effortless way to get from under the car to the tool chest and back again. Put yourself in the driver's seat with a MaxJax reclining creeper seat for increased mobility, and overall comfort while working under your vehicle lift (MaxJax vehicle lift not included). Additional features and specs include: * Rugged steel tubing construction is powdercoated to prevent rusting * Capable of holding up to 570 lbs. (259 kg) * Padding is fully wrapped in heavy-duty, marine-grade vinyl * Water, stain and abrasion-resistant, fire-retardant, and antimicrobial to make it easy to clean and maintain * Includes six 2.5 in. oil-resistant caster rollers that swivel with ease * Ground clearance of 2.5 in. when fully lowered * Slightly raised headrest for maximum neck and head support * Fully adjustable, full-padded seat and headrest are each adjustable to provide a variety of ergonomic working positions
Not Yet Reviewed
$295.99
Hi-Lift Jack Company First Responder jacks are firefighter-designed rescue tools constructed from steel, cast iron, and high-strength aluminum. They offer up to 4,660 lbs. of leveraging, lifting, and winching options. They also provide the same spreading and ramming options used in extrication as the expensive hydraulic tools, but at a fraction of the cost. First Responder jacks require no fuel or power, making them ideal for remote access with limited resources, or any USAR disaster application. No other rescue tool is as dependable, versatile, and easy to use. It's no wonder these devices are the top choice for use in heavy rescue, extrication, RIT/RIC, stabilization, and shoring. Hi-Lift Jack Company First Responder jacks are available in 36, 48, and 60 in. sizes. Features, items, and specs: * Safe use information (including rated load details and operating instructions) are included with these tools * Removable top clamp-clevis attachment rated to full capacity of jack for winching, clamping, and spreading * Durable powdercoated bright yellow main components with fire red actuating piece * Aggressive 36 in. base provides safe and effective 360 degree pinable rotation platform, while offering wide array of rescue options, including the use of cribbing, chains, and straps * Luminescent features for use in immediately dangerous to life or health (IDLH) and low-light atmospheres
( 1 )
$273.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
