Availability
Showing In Stock Items. Show All 24 Items.
On Sale
Cast from high-quality molds for proper fit, these Scott Drake exhaust manifolds will get that engine restoration on the right track to a throaty roar. Whether you are replacing a stock corroded manifold or getting to that exhaust portion of a rebuild, these manifolds will get that engine back to its deep throaty growl that you love.
( 37 )
$946.95
$851.95
Manufacturer Rebate
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant direct-fit manifold catalytic converters. With features including free-flowing mandrel-bent tubing and highly corrosion resistant, stainless steel construction, you can easily install these converters yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. The included gaskets and hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. These OEM Grade replacements are designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Not Yet Reviewed
$771.00
—
$837.00
On Sale
Corsa off-road X-pipes upgrade your vehicle with high-quality stainless steel and race car-like sound. They feature mandrel-bent tubing and Corsa RSC technology that delivers a drone-free experience during cruise.
( 3 )
$1,008.99
$908.09
AP Exhaust direct-fit catalytic converters will render your vehicle energy efficient and environmentally friendly. They're built with 409 stainless steel shell and neck construction for longer life, and feature AP's "Clean by Design" premium-grade ceramic substrates for maximum pollution reduction. Offering the most comprehensive coverage, they can provide direct-fit catalytic converters with lower emissions, long-term reliability, and an easier install. The growing concern for the environment means there is a growing need for quality emission control products. AP Exhaust direct-fit catalytic converters offer the quality, fit, and value to meet those concerns. Order the model designed for your vehicle application.
( 31 )
$807.99
—
$974.99
Clearance
Catco prides itself on leading the industry in new product development and efficient manufacturing processes for its EPA- and CARB-compliant catalytic converters. Aristo's proprietary substrate chemistry yields highly efficient loadings for lower cost and better converter efficiency while Catco's latest advanced-manufacturing technology ensures that all converters are built to exact OE dimensions and fitment. All this allows Catco to maintain industry-leading efficiency, productivity, and competitive pricing. Catco Federal/EPA direct-fit catalytic converters feature: * 409 stainless steel shell and neck construction for longer life * Aristo Clean by Design advanced catalyst technology to handle the toughest emissions problems * Increased precious metals loadings * Improved O2 storage and release * Exact O2 sensor location(s) * Lower emissions output * Long-term reliability * Keeps the MIL light off * Hardware included (where needed) * Provides for faster and easier installations * 5-year/50,000-mile warranty on converter body * 25,000-mile warranty on emissions
( 7 )
$769.99
—
$930.99
Get more power and sound with a Scott Drake concours exhaust system. These kits are manufactured from premium quality materials—engineered to original specifications. They're test-fitted on the appropriate Mustang prior to production, ensuring a trouble free installation. The concours exhaust systems are available in a wide range of styles and configurations. Order the model designed for your specific vehicle.
( 14 )
$772.95
On Sale
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 704 )
$844.55
—
$1,176.10
$760.10
—
$1,058.49
On Sale
Shafer's Classic Reproductions exhaust systems are available for a variety of popular classic vehicles—most in your choice of aluminized or stainless steel tubing. These complete exhaust systems are available as accurate OE replicas, or with a number of high performance options and variations. Shafer's exhaust systems are manufactured to OEM specifications using state-of-the-art CNC equipment. Laser-scanned from original factory components, the data is stored for use by the pipe benders, resulting in correctly bent tubing accurate to within 0.0005 in. for an exact duplicate each time the part is produced. Options for Shafer's Classic Reproductions exhaust systems include (depending on the model): * Fitments for various headers and OE-type manifolds * Tailpipe exits * X-pipes * H-pipes * Glasspack, turbo, chambered, or OE-replacement mufflers
( 51 )
$849.99
$764.99
On Sale
Stainless Works offers Factory Connect exhaust systems for a wide range of cars, trucks, and Jeeps. They're designed to improve sound and performance. The bolt-on systems connect to the factory manifolds or Stainless Works headers. You can select either a classic muscle car tone of a chambered muffler, or go for the extreme with S-Tube style mufflers. Components are built from corrosion-resistant 304 stainless steel and TIG-welded at the company's state-of-the-art facility in Streetsboro, Ohio. Smooth mandrel pipe bends optimize exhaust flow. Factory Connect systems are available in a variety of styles (cat-back, rear axle-back, etc.), configurations, pipe sizes, tip styles, and more. Order the model with options recommended for your vehicle.
( 2 )
$923.40
—
$1,262.55
$777.60
—
$1,063.20
On Sale
Flowmaster Stainless Steel American Thunder exhaust systems have been designed with the latest exhaust technology available. Through this technology, you will experience improvements in acceleration, passing power, and fuel mileage. The key to these performance improvements is Flowmaster's use of mandrel-bent tubing. Their tubing allows for superior exhaust gas flow, while their stainless steel construction allows for their corrosion-resistant qualities. These American Thunder exhaust systems also feature a stainless steel muffler(s) that'll give you plenty of Flowmaster sound.
( 302 )
$949.95
MagnaFlow Street Series performance exhaust systems deliver the smooth, deep sound you want—and the wide-open performance power you need! They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. These kits are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Street Series components are built with 409 stainless steel and all mandrel-bent tubing. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and rear section; single, dual, tri, or quad turbo mufflers; and several outlet and tip options. Order the MagnaFlow Street Series performance exhaust tailored for your specific make and model. The systems carry a lifetime construction warranty.
( 607 )
$926.00
—
$983.00
Manufacturer Rebate
MagnaFlow direct-fit catalytic converters are designed for easy bolt-on installation for the professional installer. Welding, cutting, and tube-bending equipment are not required. These cats feature a ribbed body that minimizes expansion and distortion when the converters heat up. The ribs form a channel that protects the cushioning mat from direct exposure to exhaust gases, and they hold the ceramic catalyst in proper alignment. MagnaFlow converters use a monolithic honeycomb catalyst; the ceramic coating is designed for maximum flow and surface area, and the coating method is strictly controlled to maintain exact specifications. Improper coating could result in flow restrictions or an emissions test failure. These converters are designed to exact OE specifications and are available for the most popular vehicle makes and models.
( 423 )
$779.00
—
$1,014.00
On Sale
Flowmaster American Thunder exhaust systems are designed with the latest exhaust technology available--resulting in improved acceleration, passing power, and fuel mileage. A key to these performance upgrades is Flowmaster's use of mandrel-bent tubing, which allows superior exhaust gas flow. The systems also feature mufflers (single or dual) that deliver plenty of the rich Flowmaster sound you expect. Components are built from stainless steel or aluminized steel; and some models include tips. American Thunder exhausts are available in more than a hundred configurations for fitment on specific truck and car applications.
( 545 )
$999.95
$898.95
On Sale
Flowmaster Force II exhaust systems are engineered with the latest technology for improvements in acceleration, passing power, and fuel mileage. The key to these performance enhancements is the use of mandrel-bent tubing. Force II assemblies are available in dozens of muffler and pipe configurations for fitment on thousands of year/make/model cars and trucks. Choose the size and style that's compatible with your engine type.
( 230 )
$1,199.95
$1,078.95
Free-flowing, mandrel-bent Pypes Street Legal X-pipes have reinforcing plates at critical locations and are available in 409 stainless steel or polished 304 stainless steel for years of high-powered performance. Since V8s fire unevenly, exhaust exits in pulses rather than in a steady flow. While one pipe is filled with pressure, the other pipe is relatively pressureless, but the connecting of the two pipes in a siamese pattern allows pressure to be released to the other side. This action allows the exhaust to pass through the pipe more quickly and the improved 'breathing' increases horsepower. Their high-quality, exceptionally versatile design and performance are a proven winner when it comes to bumping up the horsepower of your daily driver or race car. There's no skimping on materials here. All crossovers include dual 409 stainless reinforcement plates at the welds, where they are needed the most. All pipes are mandrel-bent, allowing for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest quality materials, the smooth, seam-coated, mandrel-bent, 409 stainless steel pipe resists corrosion and extends the life of your system. They include the X-pipe with extended legs, cutout covers, cover hardware, and installation hardware.
( 7 )
$831.79
On Sale
Dinan high-flow mid-pipes upgrade the sound and enjoyment of your BMW. These pipes allow for an aggressive tone to be achieved from your stock system. Coupled with the associated Dinan exhaust, the sound is further perfected into an aggressive growl that's hard to ignore. This full mid-section removes the factory center section, including both resonators, and replaces it with straight-through T304 stainless steel tubing for better flow and sound—while also reducing the weight by 3 lbs. Order the kit designed for fitment on your vehicle model.
Not Yet Reviewed
$849.95
MagnaFlow Tru-X pipe transitions are great for single/dual, dual/dual, and balanced tube applications. These stainless steel crossover pipes represent a significant leap forward in technology over traditional H-pipes. Their gentler radius allows for better exhaust gas scavenging, noise cancellation, and balance between cylinder banks. The results are a significant increase in power and torque but a reduction in dB sound levels--the best of both worlds.
( 49 )
$988.00
On Sale
Stainless Works CNC mandrel-bent exhaust systems are the simply the best for improving your vehicle's performance, sound, and mileage. Made of high-grade 304 stainless steel, they offer an array of options to unleash more torque and horsepower while delivering the sound your vehicle has been lacking. Most are designed to use factory hangers. Stainless Works not only offers their Factory Connect option that mates to a factory connection point, but also Performance Connect options for many models. Performance Connect gains more performance than factory connection points allow, and they require the installation of Stainless Works headers (sold separately) to gain the full performance benefit. Stainless Works also builds their mufflers entirely of stainless steel. They will never "burn in," "blow out," or change their tone—ever. Choose from a selection of universal or application-specific muffler designs, including turbo chambered (loud), chambered round (louder—can be reversed for an even more aggressive sound), and turbo S-tube (loudest—may be too aggressive for a daily driver). Additional features of Stainless Works CNC mandrel-bent exhaust systems include: * 304 stainless will never red-rust like cheaper 409 stainless * TIG-welded for strength * Durable 3/8 in. thick flanges * Mandrel-bent (no buckling) for optimal flow * Variety of tip options (varies by application) * Truck exhausts available with three exit locations: behind the passenger tire; under the rear bumper (one on each side); and in front of the passenger tire * Install-Ready; all systems come with all necessary parts to make installation as smooth as possible
( 30 )
$1,008.90
$849.60
On Sale
Make your street ride a sweet ride with Corsa XO-pipes. These crossover pipes will provide balanced exhaust flow, equaling increased power and better throttle response with a cleaner, crisper sound for your baby. Corsa's full-length XO-pipes are made of 16-gauge 304L stainless steel with mandrel bends for beauty and strength. XO-pipes are designed to bolt on after the catalytic converter and come complete with installation instructions, all necessary hardware, and gaskets so that you'll have time to enjoy a quiet, no-drone cruise.
( 6 )
$845.99
$761.39
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
