Availability
VEGE Remanufactured cylinder heads are a popular choice for performance and value. With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured cylinder heads with a level of quality that equals that of new OEM products—at extremely competitive prices. The rebuilt cylinder heads are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Unless otherwise noted, the assemblies include a cast iron or aluminum cylinder head, intake and exhaust valves, valve springs, retainers, locks, stem seals, rocker arm studs, and more. Many heads include rocker arms. Nearly a thousand models are available, for fitment on countless applications.
( 41 )
$513.99
—
$837.99
Ford Performance Parts 2018 2.3L 310 hp EcoBoost long block crate engines are designed for traditional rear drive installations. They're the same EcoBoost engine found in the 2018 Mustang and feature turbocharging, direct injection, and twin independent variable cam timing (Ti-VCT). The swap possibilities are almost endless: from early street rods, kit cars, most generations of Mustang, to just about any other vehicle build. Ford Performance Parts 2.3L 310 hp Mustang EcoBoost engine kit—this kind of performance comes standard with a dose of adrenaline! Features and items: * 310 hp and 350 lbs.-ft. torque at 3,000 rpm (with 93 octane fuel) * Production turbocharger * Starter and mounting hardware * Alternator and mounting hardware * Flywheel * Engine harness (not installed, must be used with Ford Performance control pack) * Throttle body (not installed, must be used with Ford Performance control pack) * Engine kit uses Ford Performance Parts M-6017-23T control pack (not included) for easy plug-and-play installation
( 1 )
$5,242.99
BluePrint Engines GM 383 c.i.d. 445 hp dressed power-adder stroker long block crate engines make strong foundations for nitrous, turbos, and blowers. Block features: * Cast iron * 4-bolt main * One-piece rear main seal * Passenger side dipstick * Mechanical fuel pump provision * Drilled and tapped for clutch linkage Rotating assembly: * Forged crankshaft * Forged I-beam connecting rods * Forged pistons Also includes: * Aluminum cylinder heads -- 64cc chamber -- 2.02 in. intake/1.60 in. exhaust valves -- 195cc intake/75cc exhaust runners * Hydraulic roller cam -- .536 intake/.555 exhaust -- 224 intake/236 exhaust duration at .050 -- 113 degree lobe separation * Oil pan * Valve covers * Timing cover * Harmonic balancer * 30-month/50,000-mile Warranty * Dyno-tested and shipped with results
( 1 )
$8,049.00
BluePrint Motorsports 632 c.i.d. Eliminator Power Adder Stroker engines are designed and built to be power adder-ready, whether you're looking at a turbo, supercharger, or nitrous oxide. The old adage of "there's no replacement for displacement" is becoming … dare we say, old? These days naturally aspirated engines just aren't enough for some drivers, and this long block is your solution! Details and specs: * 700 hp, 650 lbs.-ft. naturally aspirated * Compression ratio: 9.6:1 * Aluminum heads * Hydraulic roller cam BLOCK: * NEW BluePrint cast iron block * Manufactured and machined in the USA * 4-bolt main * 4.600 in. bore * One-piece rear main aeal * Tall deck (cylinder deck is appx. .400 taller / wider than OEM block) ROTATING ASSEMBLY: * New BluePrint forged crankshaft * 4.750 in. stroke * Forged H-beam 6.635 in. connecting rods * ARP 2000 Series bolts * Mahle Motorsports forged pistons * Precision gap, power adder piston rings * Internally balanced CYLINDER HEADS: * BluePrint aluminum cylinder heads (PS8012) * 119cc chamber * 2.30 in. intake / 1.88 in. exhaust valves * 358cc intake / 125cc exhaust runners * Cylinder heads feature a .300 in. raised exhaust port vs. an OEM casting * MLS head gaskets CAM SPECS: * Cam type: Roller * .698 / .698 lift * 272 / 282 duration @ .050 - 110 degree LSA ALSO INCLUDES: * Valve covers, oil pan, and timing cover * Dyno test results shipped with engine * SFI-rated dual keyway 8 in. balancer
Not Yet Reviewed
$16,449.00
ATK High Performance Chevy LQ4 6.7L 500 HP long block crate engines are designed to be used with a Turbo or Supercharger up to 15 psi. ATK engineered these engines to be affordable yet strong enough to handle a good amount of boost! Engine Specifications: * HP: 550 * TQ: 535 * Block: GM 6.0L iron LQ4 with ARP main studs * Bore/Stroke: 4.030 in. x 4.000 in. * Displacement (cu.in): 408 * Crankshaft: Manley 4.000 in. stroke internally balanced 24-tooth reluctor wheel * Rods: Manley 4340 Forged 6.125 in. H-beam with ARP 2000 bolts * Pistons: Forged * Compression ratio: 10.2:1 * Rings: Total Seal CS/AP with steel top ring * Camshaft: Hydraulic roller * Cam specs: 226/230 at 50 .600/.575 113LSA * Cylinder heads: ATK LS3 aluminum 68cc 2.165 in. / 1.590 in. valves * Rocker arms: OE powdered metal 1.7 ratio with trunnion upgrade * Oil pump: Melling 10296 high volume Recommended Components: • Oil: 10W30 • Oil filter: Wix • Fuel system – OE EFI system or aftermarket • Intake – Stock fuel injected or aftermarket • Balancer -- Stock internally balanced • Flex plate/Flywheel -- Stock internally balanced • Timing -- Set to factory specifications via PCM module (tune required) • Spark plug: NGK BR7 • Tuning: Chassis dyno tune required • Firing order -- Stock • Fuel – 91+ Octane • Recommended stall converter -- 2800+ based on application • Headers -- 1 7/8 in.+ depending on application
Not Yet Reviewed
$7,899.99
BluePrint Engines GM BB compatible 496 c.i.d. Stroker long block base crate engines with forged components are built to accept power adders like turbochargers, superchargers, NOS, etc. They're built to deliver 561 hp and 512 lbs.-ft. of torque. The engines also include valve covers, an oil pan and timing cover. Compression ratio: 8.8:1 Engine specifications: --- BLOCK: * NEW BluePrint cast iron block * 4-bolt main * 4.500 in. bore * One-piece rear main seal * Mechanical fuel pump provision: Yes * Standard deck --- ROTATING ASSEMBLY: * New BluePrint forged crankshaft * 4.250 in. stroke * Forged H-beam 6.135 in. connecting rods * Forged pistons * Internal ---CYLINDER HEADS: * BluePrint aluminum cylinder heads * 119cc chamber * 2.30 in. intake / 1.88 in. exhaust valves * 316cc intake / 124cc exhaust runners * Cylinder heads feature a .300 in. raised exhaust port vs. an OEM casting * Must verify header/exhaust clearance ---CAM SPECS: * Cam type: Hydraulic roller * .540 Intake .560 exhaust * 242 intake / 248 exhaust duration * @ .050 - 114-degree lobe separation --- IGNITION TIMING: * 10-16 degrees and total timing 32-34 degrees ---NOTES: * Replaces BP49610CT * Built with dual keyway crankshaft for harmonic balancer * SFI harmonic balancer included on engine * Not for EGR * Must verify header/exhaust clearance
Not Yet Reviewed
$11,299.00
If huge horsepower is what you are searching for, AFR 357cc Magnum aluminum cylinder heads will certainly deliver. With AFR's fully CNC-ported 357cc heads flowing 425 cfm, they represent the ultimate in airflow for your big block Chevrolet. These cylinder heads were targeted at larger cu. in. engines (509-632 c.i.d.) looking for maximum horsepower and rpm capabilities with a primary operating range of 3,500-8,000 rpm (this range is an average and will vary with engine displacement and component selection). These aluminum heads also provide impressive torque figures at higher rpm levels. Blown, turbo, and nitrous engines will especially like the larger, higher flowing intake ports. AFR 357cc Magnum BBC cylinder heads will work best with camshafts exceeding 0.750 in. gross valve lift to make better use of the substantial airflow found in the higher lift range. The AFR 357cc heads come standard with AFR's trademark 3/4 in. thick cylinder head deck, reinforced rocker stud bosses, and premium one-piece stainless steel 2.300 in. intake and 1.880 in. exhaust valves. The AFR's fully CNC-ported 357 heads come with a 121cc chamber and are available with an optional 114cc combustion chamber as well. Order the cylinder head model suited to your needs.
Not Yet Reviewed
$4,591.65
—
$5,184.90
Chevrolet Performance 1.4L 85 c.i.d. remanufactured long block crate engines consist of the engine block, crankshaft, connecting rods, pistons, piston rings, cylinder head assembly (including valve train components), lifters, camshafts, timing gears and chain, timing chain dampener, front cover, oil pump, cam cover, and oil pan. The turbocharged Ecotec 1.4L is part of GM's small-displacement, power-dense four-cylinder engines. The wide rpm range for maximum torque helps the engine deliver better driving experience and performance. This turbocharged engine's power-boosting advantage comes from forcing greater airflow into the engine. Its pressurized charge packs more air into the cylinders, allowing them to process the air and fuel of a larger engine for momentary driving situations. The 1.4L's turbocharger is integrated within the exhaust manifold, for reduced weight and greater packaging flexibility in smaller vehicles. The engine incorporates numerous mass-reducing features, including a cast iron block with a hollow frame structure, hollow-cast camshafts and a plastic intake manifold. NOTES: Includes spark plugs, crankshaft balancer, oil filter bypass valve, oil pressure relief valve, oil filter, water pump, thermostat, coolant temperature sensor, camshaft position solenoid, heated oxygen sensor, camshaft position sensor, crankshaft position sensor, knock sensor, and oil sensor switch.
Not Yet Reviewed
$6,952.99
BluePrint Builder Series 383/436HP Standard Edition EFI crate engine and 700R4 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy small block-compatible 383 (c.i.d.) engine that produces 436 horsepower, this standard edition builder series includes a polished pulley kit and 700R4 automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.0:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and steel crankshaft. Altogether, this assembly produces 443 lbs.-ft. of torque. When you need or want a new powertrain for your GM ride, go with the authority in crate engines and their BluePrint Builder Series 383/436HP Standard Edition EFI crate engine and 700R4 transmission combos. Other product features, items, and specifications include: Block: * New BluePrint cast iron * Bore is 4.000 in. * Main caps are 4-bolt * One-piece rear main seal Rotating Assembly: * Cast steel crankshaft * Stroke – 3.750 in. * OEM-style 5.700 in. connecting rods * Hypereutectic pistons * Weighted 8 in. harmonic balancer (BPP400L) Cylinder Heads: * BluePrint H8002K performance models (0.500 in. raised port vs. OEM) * Chamber – 64cc * Valves are 2.020 in. intake and 1.600 in. exhaust * Exhaust runners are 195cc intake and 75cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.544 in. * Exhaust valve lift – 0.555 in. * Intake duration at 0.050 in. of lift – 230 * Exhaust duration at 0.050 in. of lift - 236 * Lobe separation angle (LSA) – 110 degrees Ignition Timing * Initial is 10-16 degrees * Total is 32-34 degrees * Firing order is 1-8-4-3-6-5-7-2 Automatic Transmission Package: * Complete 700R4 package * Torque converter with 2,200 – 2,400 rpm stall * Weighted flexplate (one-piece, RMS) * Starter * Due to numerous tire/rear gear combinations, this transmission does not ship with a speedometer gear or sender housing Other Components: * Dual plane aluminum intake manifold with satin finish * Complete EFI system with pump kit * Spark plugs and wires (with separators) * Valve covers, oil pan, and timing cover * Oil filter * Front accessory drive with polished finish (includes A/C and power steering) * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) * Thermostat and housing Note: Factory 5 applications require a special order (please call). Recommended fuel is 91 octane. Recommended oil is BPP710. Not designed for EGR compatibility.
Not Yet Reviewed
$17,999.00
BluePrint Builder Series 383/436HP Standard Edition carbureted crate engine and 700R4 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a carbureted Chevy small block-compatible 383 (c.i.d.) engine that produces 436 horsepower, this standard edition builder series includes a polished pulley kit and 700R4 automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.0:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and steel crankshaft. Altogether, this assembly produces 443 lbs.-ft. of torque. When you need or want a new powertrain for your GM ride, go with the authority in crate engines and their BluePrint Builder Series 383/436HP Standard Edition carbureted crate engine and 700R4 transmission combos. Other product features, items, and specifications include: Block: * New BluePrint cast iron * Bore is 4.000 in. * Main caps are 4-bolt * One-piece rear main seal * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating Assembly: * Cast steel crankshaft * Stroke – 3.750 in. * OEM-style 5.700 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * External front/rear * Weighted 8 in. harmonic balancer (BPP400L) Cylinder Heads: * BluePrint H8002K performance models (0.500 in. raised port vs. OEM) * Chamber – 64cc * Valves are 2.020 in. intake and 1.600 in. exhaust * Exhaust runners are 195cc intake and 75cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.544 in. * Exhaust valve lift – 0.555 in. * Intake duration at 0.050 in. of lift – 230 * Exhaust duration at 0.050 in. of lift - 236 * Lobe separation angle (LSA) – 110 degrees Ignition Timing * Initial is 10-16 degrees * Total is 32-34 degrees * Firing order is 1-8-4-3-6-5-7-2 Automatic Transmission Package: * Complete 700R4 package * Torque converter with 2,200 – 2,400 rpm stall * Flexplate (one-piece, RMS) * Starter * Due to numerous tire/rear gear combinations, this transmission does not ship with a speedometer gear or sender housing Other Components: * Dual plane aluminum intake manifold with satin finish * Carburetor (750 cfm) * Fuel pump * Spark plugs and wires (with separators) * Valve covers, oil pan, and timing cover * Oil filter * Front accessory drive with polished finish (includes A/C and power steering) * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) * Thermostat and housing Note: Factory 5 applications are special order (please call). Recommended fuel is 91 octane. Recommended oil is BPP710. Not designed for EGR compatibility.
Not Yet Reviewed
$15,899.00
BluePrint Standard Edition Builder Series combos pair engine and transmission, eliminating guesswork, making it easier to gain the performance you desire. These combos match a carbureted GM small block-compatible 454 c.i.d. engine with a 700R4 automatic transmission enabling the production of 563 hp and 545 lb.-ft. of torque with a compression ratio of 10.5:1. BluePrint high-strength cast iron engine block: * 4.250 in. bore * 4-bolt main * One-piece rear main seal * Drilled and tapped for clutch linkage * Mechanical fuel pump provision * Passenger side dipstick Rotating assembly: * BluePrint forged crankshaft * Stroke: 4.000 in. * Forged 6.00 in. connecting rods * Forged pistons * Internally balanced front and rear BluePrint aluminum cylinder heads: * 64cc chamber * 2.08 in. intake/1.60 in. exhaust valves * 220cc intake/67cc exhaust runners * .500 raised port vs. OEM Hydraulic roller camshaft: * .638 in. intake/.622 in. exhaust valve lift * 251 intake/259 exhaust duration at .050 in. of lift * 114 degrees lobe separation angle (LSA) Ignition timing: * Initial timing 10 to 16 degrees, total timing 32 to 34 degrees 700R4 automatic transmission package: * 2,200 to 2,400 stall torque converter * Flexplate * Starter Also included: * Holley 950cfm double pumper carburetor * Aluminum single plane intake manifold * Pro Series Ready Run distributor * Electric fuel pump * Thermostat and thermostat housing * Valve covers * Spark plugs and wires * Timing cover * Oil pan * Polished front accessory drive: -- Reverse rotation short water pump -- Type II power steering pump -- Remote power steering pump reservoir -- 140-amp one-wire alternator -- 7B10 peanut-style air conditioning compressor
Not Yet Reviewed
$19,299.00
BluePrint Builder Series 400/500HP Standard Edition EFI crate engine and 700R4 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy small block-compatible 400 (c.i.d.) engine that produces 500 horsepower, this standard edition builder series includes a polished pulley kit and 700R4 automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.3:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 510 lbs.-ft. of torque. When you need or want a new powertrain for your GM ride, go with the authority in crate engines and their BluePrint Builder Series 400/500HP Standard Edition EFI crate engine and 700R4 transmission combos. Other product features, items, and specifications include: Block: * New BluePrint cast iron * Bore is 4.125 in. * Main caps are 4-bolt * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating Assembly: * New BluePrint forged crankshaft * Stroke – 3.750 in. * Forged I-beam 5.700 in. connecting rods with 150,000 psi bolts * Forged pistons * Internal front/external rear * Non-weighted 8 in. harmonic balancer (BPP350) Cylinder Heads: * BluePrint H8103 performance models (0.500 in. raised port vs. OEM) * Chamber – 64cc * Valves are 2.080 in. intake and 1.600 in. exhaust * Exhaust runners are 220cc intake and 67cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.555 in. * Exhaust valve lift – 0.576 in. * Intake duration at 0.050 in. of lift – 236 * Exhaust duration at 0.050 in. of lift - 242 * Lobe separation angle (LSA) – 110 degrees Ignition Timing * Initial is 10-16 degrees * Total is 32-34 degrees (at 3,500 rpm) * Firing order is 1-8-4-3-6-5-7-2 Automatic Transmission Package: * Complete 700R4 package * Torque converter with 2,200 – 2,400 rpm stall * Weighted flexplate (one-piece, RMS) * Starter * Due to numerous tire/rear gear combinations, this transmission does not ship with a speedometer gear or sender housing Other Components: * Dual plane aluminum intake manifold with satin finish * Complete EFI system with pump kit * Spark plugs and wires (with separators) * Valve covers, oil pan, and timing cover * Oil filter * Front accessory drive with polished finish (includes A/C and power steering) * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) * Thermostat and housing Note: Recommended fuel is 91 octane. Recommended oil is BPP710. Not designed for EGR compatibility.
Not Yet Reviewed
$19,099.00
BluePrint Standard Edition Builder Series combos pair engine and transmission, eliminating guesswork, making it easier to gain the performance you desire. These combos match a fuel injected GM small block-compatible 454 c.i.d. engine with a 700R4 automatic transmission enabling the production of 563 hp and 545 lb.-ft. of torque with a compression ratio of 10.5:1. BluePrint high-strength cast iron engine block: * 4.250 in. bore * 4-bolt main * One-piece rear main seal * Drilled and tapped for clutch linkage * Mechanical fuel pump provision * Passenger side dipstick Rotating assembly: * BluePrint forged crankshaft * Stroke: 4.000 in. * Forged 6.00 in. connecting rods * Forged pistons * Internally balanced front and rear BluePrint aluminum cylinder heads: * 64cc chamber * 2.08 in. intake/1.60 in. exhaust valves * 220cc intake/67cc exhaust runners * .500 raised port vs. OEM Hydraulic roller camshaft: * .638 in. intake/.622 in. exhaust valve lift * 251 intake/259 exhaust duration at .050 in. of lift * 114 degrees lobe separation angle (LSA) Ignition timing: * Initial timing 10 to 16 degrees, total timing 32 to 34 degrees 700R4 automatic transmission package: * 2,200 to 2,400 stall torque converter * Flexplate * Starter Also included: * Holley Sniper 2 EFI system * Aluminum single plane intake manifold * Pro Series Ready Run distributor * EFI fuel pump kit * Thermostat and thermostat housing * Valve covers * Spark plugs and wires * Timing cover * Oil pan * Polished front accessory drive: -- Reverse rotation short water pump -- Type II power steering pump -- Remote power steering pump reservoir -- 140-amp one-wire alternator -- 7B10 peanut-style air conditioning compressor
Not Yet Reviewed
$21,399.00
BluePrint Standard Edition Builder Series combos pair engine and transmission, eliminating guesswork, making it easier to gain the performance you desire. These combos match a carbureted GM small block-compatible 427 c.i.d. engine with a 700R4 automatic transmission enabling the production of 540 hp and 535 lb.-ft. of torque with a compression ratio of 10:1. BluePrint high-strength cast iron engine block: * 4.125 in. bore * 4-bolt main * One-piece rear main seal * Drilled and tapped for clutch linkage * Mechanical fuel pump provision * Passenger side dipstick Rotating assembly: * BluePrint forged steel crankshaft * Stroke: 4.000 in. * Forged 6.00 in. connecting rods * Forged pistons * Internally balanced front and rear BluePrint aluminum cylinder heads: * 64cc chamber * 2.08 in. intake/1.60 in. exhaust valves * 220cc intake/67cc exhaust runners * .500 raised port vs. OEM Hydraulic roller camshaft: * .577 in. intake/.577 in. exhaust valve lift * 240 intake/248 exhaust duration at .050 in. of lift * 112 degrees lobe separation angle (LSA) Ignition timing: * Initial timing 10 to 16 degrees, total timing 32 to 34 degrees 700R4 automatic transmission package: * 2,200 to 2,400 stall torque converter * Flexplate * Starter Also included: * Holley 850cfm double pumper carburetor with manual choke * Satin aluminum intake manifold * Pro Series Ready Run distributor * Thermostat and thermostat housing * Valve covers * Spark plugs and wires * Electric fuel pump * Timing cover * Oil pan * Polished front accessory drive: -- Reverse rotation short water pump -- Type II power steering pump -- Remote power steering pump reservoir -- 140-amp one-wire alternator -- 7B10 peanut-style air conditioning compressor
Not Yet Reviewed
$18,899.00
BluePrint's Standard Edition Builder Series combos pair engine and transmission, eliminating guesswork and making your life easier. These combos match a carbureted GM small block-compatible 400 c.i.d. engine with a 700R4 automatic transmission enabling the production of 500 hp and 510 lb.-ft. of torque with a compression ratio of 10.3:1. Block: * BluePrint high-strength cast iron * Drilled and tapped for clutch linkage * Mechanical fuel pump provision * Passenger side dipstick * 4.125 in. bore * 4-bolt main * One-piece rear main seal Rotating assembly: * BluePrint forged crankshaft * Stroke: 3.750 in. * Forged I-beam 5.700 in. connecting rods with 150,000 psi bolts * Forged pistons * Internally balanced front, externally balanced rear BluePrint aluminum cylinder heads: * Chamber: 64cc * 2.08 in. intake/1.60 in. exhaust valves * 220cc intake/67cc exhaust runners * .500 raised port vs. OEM Camshaft: * Hydraulic roller * .555 in. intake/.576 in. exhaust valve lift * 236 intake/242 exhaust duration at .050 in. of lift * 110 degrees lobe separation angle (LSA) Ignition timing: * 10 to 16 degrees initial/total timing 32 to 34degrees at 3,500 rpm 700R4 transmission package: * 2200 to 2400 stall torque converter * Flexplate * Starter Also included: * Holley 750cfm classic carburetor * Pro Series Ready to Run distributor * Aluminum dual plane intake manifold * Thermostat and thermostat housing * Mechanical fuel pump * Spark plugs and wires * Plug wire separator * Valve covers * Timing cover * Oil filter * Oil pan * Polished front accessory drive: -- Reverse rotation short water pump -- Type II power steering pump -- Remote power steering pump reservoir -- 140-amp one-wire alternator -- 7B10 peanut-style air conditioning compressor
Not Yet Reviewed
$16,999.00
Built for high performance applications, the Ford Performance 5.0L Coyote Gen 4 Aluminator SC crate engines are a powerhouse—ideal for custom race builds and 2024 GT Mustangs. While the Aluminator block, cylinder heads, oil pan, and intake manifold are factory pieces, Ford Performance replaces the hypereutectic pistons and sintered-steel rods with Mahle forged slugs, ARP 2000 rod bolts, and Manley forged H-beam rods, keeping the factory 12.0:1 compression ratio in naturally aspirated form and 9.5:1 on its boost-ready Aluminator crate. These flagship crates are quite popular with Ford diehards in the custom car and street rod world—because who really wants to put a Chevy LS in a deuce coupe? Crate engine features and specs: * Fits 2024+ Mustang GT * 5.0L (302 cubic inches) * 9.5:1 compression ratio (nominal) * Mahle hard anodized forged pistons with Grafal low friction coating * Manley H-beam connecting rods with ARP 2000 bolts * Forged steel crankshaft * Uses production 2024 Mustang GT aluminum block * 2024+ Production oil pan * Tuned composite Mustang GT intake manifold with production dual drive-by-wire 80mm throttle bodies with variable runner control * Four-valve-per-cylinder aluminum heads with roller-finger followers reduce friction. * Mustang GT production camshafts * Includes Ford Performance colder, heat range zero spark plugs (M-12405-M50A) * Includes Ford Performance oil filter (M-6731-FL820) * Includes billet steel gerotor oil pump gears (M-6600-M50A) * Vehicle harness and PCM not included * Does not include alternator (for alternator kit: refer to part numbers M-8600-M50BALT or M-8600-M50ALTA) * Engine mount bosses and bell housing mount pattern common to 4.6L modular engines * Does not include exhaust manifolds
Not Yet Reviewed
$15,262.99
Clearance
VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.
( 72 )
$4,276.99
—
$5,337.99
Clearance
Cloyes engine timing sets meet OE performance requirements. They utilize the latest in design and materials so you can enjoy quiet, maintenance-free performance. These sets are available in various timing chain styles, such as link belt, single roller, and single non-roller. The gears are made from high alloy steel, and heat treated for durability; while the chain is pre-stressed, and heat treated for longevity. Order the timing set designed for your specific model application.
( 7 )
$3,178.99
$2,027.50
—
$3,037.99
The perfect foundation for your Boss engine--Ford Performance Parts Boss 302 engine blocks! They're built stronger than the originals to make your high performance build a success. Designed as replacements for the legendary Boss 302 and Boss 351 blocks, they use the latest technology and manufacturing techniques. Cast from diesel-grade iron with siamesed bores, thick cylinder walls and decks, Boss block strength is far superior to any Ford production block. Boss 302 blocks are available in standard and Big Bore versions that support engine sizes up to 363 c.i.d. Proven around the world, both on the track and on the street; all Ford Performance Boss 302 blocks are cast and machined to the highest industry standards in the USA. Features include: * Big Bore version features 4.125 in. bore capacity, finished at 4.115 in. rough bore * Standard bore version is finished at 3.990 to 3.995 in. rough bore with 4.125 in. bore capacity * 8.2 in. deck height, finished at 8.200 in. plus .010 to .015 in. * Optimized cylinder wall length for stroker applications up to 3.5 in. with no grinding or clearancing (depends on crank/rod manufacturer) * Splayed 4-bolt mains on 2, 3, 4, main caps * 2-bolt main on first and fifth main caps * Main bearing bores finished to low limit * Finished lifter bores * Machined to accept factory roller lifter guides and lifter guide retainer * Fits factory 1979-95 Mustang oil pan with custom oil pickup tube, part number: M-6622-BOSS302 * NASCAR inspired front oil feed on both lifter galleys * Revised cooling system passageways * Increased bulkhead material * Threaded core and galley plugs (straight thread port plugs with O-ring) * Require special length 1/2 in. head bolts M-6065-BOSS or head studs M-6014-BOSS recommended with M-6049-X306/307/Z304DA heads * Designed for M-6049-X306//X307/C3/D3/Z304DA cylinder heads * Not designed for production 302/351W or M-6049-Y302/Y303/X302/X303/X304/X305 cylinder heads * Uses common O.D. cam bearings M-6261-J351/R351 * Unique cam plug M-6026-S351 included * M-6051-S331 or M-6051-CP331 head gasket recommended * Uses stock-type timing cover (M-6059-D351 recommended; includes fuel pump provision) * Retains clutch cross shaft pivot hole * Original-style oil filter location * Original motor mount boss locations * Original bell housing pattern * Approximate weights: Big Bore 163 lbs.; standard bore 175 lbs.
( 3 )
$2,445.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
