Filters
Ford Performance presents the next generation 5.0L power all-in-one complete powertrain kit! The crew at Ford Performance spec'd out these kits to simplify the swap of the newest, most innovative 5.0L Coyote engine into just about any Ford vehicle. The Coyote power module teams the Mustang GT 460 hp 5.0L Coyote V8 with a state-of-the-art 10-speed automatic transmission, along with all the electronics and hardware to finish the installation. The engine features advances like direct and port fuel injection, twin independent variable camshaft timing, along with a lightweight plasma transferred wire arc spray aluminum engine block. The Coyote power module simplifies both the shopping and build experience by kitting up the right parts that are matched to deliver potent performance with civilized drivability. The engine control pack is truly plug-and-play to simplify the conversion to a modern electronically fuel injected V8 high performance engine. Build the Coyote project of your dreams with high-quality aftermarket parts by Ford Performance!
Not Yet Reviewed
$19,555.99
Chevrolet Performance LT1 6.2L E-Rod long block crate engines have it all. They're architecturally similar to the LS family of small block engines, but with a unique block casting, cylinder head design, oiling system, and more. LT1 engines also combine advanced technologies—including direct-injection and continuously variable valve timing to support an advanced combustion system. Offered with a wet-sump or dry-sump oiling system, the Chevy E-Rod engine systems include the specially designed engine controller for retro-fit applications and harness needed to get the engine running. Engine specs and features: * Cast aluminum with 6-bolt nodular iron main bearing caps * Direct-injection, spark-ignition Gen-V small block V8 * Horsepower: 455 at 6,000 rpm * Torque: 465 lbs.-ft. at 4,600 rpm * Crankshaft: Forged steel * Connecting rods: Forged powdered metal * Pistons: Eutectic * Camshaft type: Billet steel roller * Valve lift (in.): .561 intake/.531 exhaust * Camshaft duration (at 0.050 in.): 200 degrees intake/212 degrees exhaust * Cylinder heads: Aluminum, rectangular port D/I * Valve size (in.): 2.13 intake/1.59 exhaust * Compression ratio: 11.5:1 * Rocker arms: Investment-cast, roller trunnion * Rocker arm ratio: 1.81:1 * Recommended fuel: Premium pump * Maximum recommended rpm: 6,600 * Reluctor wheel: 58x * Balanced: Internal * Engine control module * Exhaust manifolds * Catalytic converters * Mass airflow sensor and sensor boss * Oxygen sensors and sensor bosses * Air filter * Accelerator pedal * Evaporative emissions canister * Instruction manual
Not Yet Reviewed
$12,803.21
—
$13,458.59
By combining the large-displacement and heavy-duty elements of the L8T 6.6L engine and a unique camshaft based off the Corvette Stingray's high-revving LT2 V-8, Chevrolet Performance engineers have created the all-new L8P 400 c.i.d. Performance crate engine. Rated at 523 hp and 543 lbs.-ft. of torque, it offers your project a unique and naturally aspirated combination of big-displacement torque and high-rpm horsepower. The L8T 6.6L foundation is the same high-strength, big-displacement engine found in the Silverado HD from 2020 to present day, featuring a forged steel crankshaft and high-strength components. Additional features such as oil-spray cooling for the pistons and a cast iron, long-skirt cylinder block with 6-bolt, cross-bolted main caps contribute to the engine's strength and durability. The new L8P builds on that with a unique, upgraded valvetrain featuring performance-oriented valves and springs, along with a unique camshaft that is based off the Corvette Stingray's LT2 engine. It has a non-active fuel management profile and more duration than the L8t's camshaft. It's the best of both engines: the largest displacement in the LT family and the power-building attributes of the Corvette camshaft. Put it to work in your project. Fast Facts: * Displacement: 400 cu. in. (6.6L) * Bore x Stroke: 4.06 in. x 3.86 in. * Crankshaft: Forged steel * Pistons: Hypereutectic aluminum * Compression ratio: 10.8:1 * Cylinder heads: Rectangular port D/I with 59.02cc chambers * Camshaft type: Billet steel hydraulic roller * Camshaft duration: 218 degree intake/231 degree exhaust at .050 in. * Fuel delivery: Direct injection with high-pressure pump * Horsepower: 523 at 5,800 rpm * Torque (lbs.-ft.): 543 at 4,800 rpm * Engine type: Gen V small block V-8 direct injection spark ignition * Block: Cast iron with 6-bolt no Dula main bearing caps * Connecting rods: Forged powder-metal * Valve lift (in.): 0.549 intake / 0.549 exhaust * Rocker arms: Investment cast roller trunnion * Rocker arm ratio: 1.8:1 * Intake manifold: Composite * Throttle body: 87mm diameter (single-bore) * Fuel delivery: High-pressure direct injection (2,175 psi / 150 bar) * Recommended fuel: Premium pump * Ignition system: Coil-on-plug * Maximum recommended RPM: 6,000 rpm * Reluctor wheel: 58X * Balanced: Internal * Note: Use with the new engine control kit, P/N 19435524, which includes a programmed controller, wire harness, pedal, oxygen sensors and mounts, MAD, fuel line pressure sensor and fuel pump power module. Flexplate P/N 12685003 must be purchased for these engines to be compatible with the 10-speed supermatic transmission. 10-speed supermatic transmission uses six bolts to attach the torque converter.
Not Yet Reviewed
$8,948.80
ATK High Performance Chevy LQ4 6.7L 500 HP long block crate engines are designed to be used with a Turbo or Supercharger up to 15 psi. ATK engineered these engines to be affordable yet strong enough to handle a good amount of boost! Engine Specifications: * HP: 550 * TQ: 535 * Block: GM 6.0L iron LQ4 with ARP main studs * Bore/Stroke: 4.030 in. x 4.000 in. * Displacement (cu.in): 408 * Crankshaft: Manley 4.000 in. stroke internally balanced 24-tooth reluctor wheel * Rods: Manley 4340 Forged 6.125 in. H-beam with ARP 2000 bolts * Pistons: Forged * Compression ratio: 10.2:1 * Rings: Total Seal CS/AP with steel top ring * Camshaft: Hydraulic roller * Cam specs: 226/230 at 50 .600/.575 113LSA * Cylinder heads: ATK LS3 aluminum 68cc 2.165 in. / 1.590 in. valves * Rocker arms: OE powdered metal 1.7 ratio with trunnion upgrade * Oil pump: Melling 10296 high volume Recommended Components: • Oil: 10W30 • Oil filter: Wix • Fuel system – OE EFI system or aftermarket • Intake – Stock fuel injected or aftermarket • Balancer -- Stock internally balanced • Flex plate/Flywheel -- Stock internally balanced • Timing -- Set to factory specifications via PCM module (tune required) • Spark plug: NGK BR7 • Tuning: Chassis dyno tune required • Firing order -- Stock • Fuel – 91+ Octane • Recommended stall converter -- 2800+ based on application • Headers -- 1 7/8 in.+ depending on application
Not Yet Reviewed
$7,899.99
Chevrolet Performance LS3 6.2L E-Rod long block crate engines offer a stunning combination of horsepower and efficiency, making them perfect for the race track or just cruising around town in your street rod or muscle car. Features include: * 6.2L LS3 engine with 430 hp and 425 lb.-ft. of torque * Engine wiring harness * Engine control module * Catalytic converters * Exhaust manifolds * Oxygen sensors and sensor bosses * Fuel tank evaporative emissions canister * Air filter * MAF sensor * Accelerator pedal * Instruction manual
Not Yet Reviewed
$10,942.12
Chevrolet Performance L8T 6.6L 401 c.i.d. engine assemblies feature 401 hp and 464 lbs.-ft. of torque—the largest displacement Gen V LT family engine in the company's lineup. Direct injection offers more precise fuel control than port injection, enabling a comparatively high compression ratio of 10.8:1 in the engine, which contributes to its high output. These crate engines are built with a forged steel crankshaft and other high-strength parts. Additional features such as oil spray cooling for the pistons and a cast iron, long-skirt cylinder block with 6-bolt, cross-bolted main caps contribute to the engines' strength and durability. Production style exhaust manifolds are included. The L8T crate engine package comes complete from the throttle body to the oil pan, including the PVC tube, evap tube, oil dipstick, and oil fill tube and cap. It does not include the controller, harness, oxygen sensors, or a front-end accessory drive system. Product notes: * Engine is shipped with high-pressure direct-injection fuel pump installed * Front-end accessory drive system must be ordered separately and includes hydraulic power steering, with center pulley. Pulley-mounted fan not recommended. * Use front-end accessory drive system P/N 19433745 for applications with air conditioning and front-end accessory drive system P/N 19433746 for applications without air conditioning. * Includes 8-bolt flexplate for automatic transmissions * Used with Engine Control Kit 19433736 (must use 6L80 transmission). Includes programmed controller, wire harness, pedal, oxygen sensors and mounts, MAF, fuel line pressure sensor, and fuel pump power module. Specifications: * Engine: Wet sump L8T Gen 5 6.6L * Horsepower: 401 hp at 5,200 rpm * Torque: 464 lbs.-ft. at 4,000 rpm * Compression ratio: 10.8:1 * New Block: L8T cast iron 6-bolt 4.060 in. bore * Crankshaft: Forged steel, 3.860 in. stroke * Heads: 12703610 cast aluminum, 59.02cc * Valves: 2.130 in. hollow intake / 1.590 in. Inconel exhaust * Camshaft lift: Hydraulic roller 0.500 in. / 0.492 in. * Duration at 0.050 in.: 193 degrees / 199 degrees * Rocker arm ratio: 1.8 * Max RPM: 5600 * Stroke (in.): 3.860 * Heads, chamber size: Aluminum Gen V LT, 59.02cc * Cylinder bore diameter: 4.060
Not Yet Reviewed
$8,948.80
Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
Not Yet Reviewed
$6,197.95
Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
Not Yet Reviewed
$6,301.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
