Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
19 Results Found For "Anode"
Showing In Stock Items. Show All 29 Items.
All American Billet Silverline Series Serpentine Kits
All American Billet Silverline Series serpentine kits are designed to give any engine an aggressive black style, highlighted by machined finished areas for a truly standout look! These kits come standard with high performance accessories. Enjoy a no-hassle installation with all the hardware and necessary components included in the box. A variety of setups are available to fit models with or without power steering and air conditioning. Dozens of models are available; order the kit recommended for your vehicle and engine application.
( 7 )
$2,495.00
—
$3,395.00
Billet Specialties Tru Trac Gen V LT4 Serpentine Systems with A/C
Billet Specialties' Tru Trac Gen V LT4 serpentine drive system with A/C is the perfect accessory upgrade for GM's supercharged high-tech horsepower. The new LT4 Tru Trac features precision-machined brackets and pulleys, giving you perfect alignment with optimal belt wrap. Billet Specialties has worked with the nation's top chassis manufacturers to verify compatibility and fit. Adding hydraulic power steering is just one of the many advantages of the Gen V LT4. Tru Trac serpentine system includes: * Powermaster 170 amp one-wire alternator * Genuine Sanden SD7 AC compressor * Tuff Stuff power steering pump * ARP fasteners * Continental Poly-V serpentine belts * Hard coat anodizing for durability in high belt wear areas * Precision machined black anodized pulleys, brackets, and covers * Stainless steel hardware used throughout for corrosion resistance * Compressor manifold * Power steering hardline * Pre-installed power steering and alternator pulleys
Not Yet Reviewed
$3,104.95
Billet Specialties Tru Trac Serpentine Systems with A/C
Billet Specialties Tru Trac serpentine systems with A/C feature easy, straightforward assembly—with no spacers or washers to fool with. The entire Tru Trac systems are designed to mount to the engine block to allow for any cylinder head/intake configuration. All hardware and fasteners are included in each kit to complete the install. Tru Trac serpentine systems with A/C include: * Powermaster 170 amp 1-wire alternator * Billet aluminum alternator fan and pulley * Edelbrock water pump * Billet aluminum water pump pulley * Billet aluminum bridge bracket * Patent-pending billet aluminum tensioner engineered specifically for each Tru Trac serpentine system * Billet aluminum tensioner pulley * Billet aluminum crankshaft pulley * Polished ARP 12-point stainless steel fasteners * Goodyear Gatorback 6-rib serpentine belt * Comprehensive installation manual * Polished Sanden SD-7 A/C compressor * Polished billet aluminum A/C compressor clutch cover * Polished billet aluminum A/C compressor manifold
( 20 )
$2,639.95
Summit Racing™ Complete Serpentine Belt Systems
These billet serpentine systems are easy to install, budget friendly, and styled just right. Summit serpentine belt systems start with a CNC-machined, 1/2 in. thick, 6061 T6 billet aluminum face plate, which has positive belt adjusting holes for both the alternator and A/C pump, plus beveled edges and a machined Summit logo. You also get CNC-machined 6061-T6 billet aluminum crank, water pump, alternator, power steering, and clutch cover pulleys, plus a chrome 105 or 140 Amp alternator, a chrome Sanden SD-7 A/C compressor with manifold lines (as noted), an as-cast aluminum GM Type 2 power steering pump (as noted), an as-cast GM high-flow water pump, a serpentine belt, and all the mounting hardware you need. It might look fancy, but adjustments are easy, all you need is a pinch bar and a socket wrench.
( 10 )
$3,199.99
All American Billet Serpentine Kits
All American Billet serpentine kits are perfect for cleaning up your engine compartment and giving it a fresh look. These kits come standard with high performance accessories. If you need to replace your belt system or just want to show off to your friends these All American Billet serpentine kits will do just that! Installation is easy with all the hardware and necessary components included in the box. A variety of different setups are available to fit models with or without power steering and air conditioning.
( 16 )
$2,095.00
—
$3,595.00
Eddie Motorsports V-Drive V-Belt Pulley Drive Systems
Tough, shiny, beautiful, and powerful are all words that come to mind when looking into Eddie Motorsports V-Drive V-belt pulley drive systems. These multiple-component systems are constructed from billet aluminum for optimum strength, corrosion resistance, and longevity. They include an aluminum water pump, Powermaster 170 amp alternator, Gates V-belts, and all necessary stainless steel hardware. GM Type II power steering pumps and Sanden-style SD7 A/C compressors are used on units with power steering or air conditioning. Polished or clearcoated systems use polished finished components. Choose the options and fitment for your specific application—then enjoy the incredible performance, exceptional style, and tough construction of Eddie Motorsports V-Drive V-belt pulley drive systems.
( 2 )
$2,140.95
Ford Performance Parts 5.0L Gen 3 Aluminator Short Block Crate Engines
Ford Performance Parts 5.0L Gen 3 Aluminator short block crate engines are hand assembled using quality high-performance internal parts. Offered in two compression ratios, they serve as a strong foundation for the enthusiast that wants to spec and finish a Coyote build to his or her particular application and needs. Ford Performance engineers have taken care of the toughest part of building a new engine by designing a strong and durable short block that offers a wide range of power possibilities. Additional features and specifications: * 5.0L (302 cu. in.) * Precision internal balanced * Available in 12.0:1 or 9.5:1 compression ratio * Forged steel crankshaft * Mahle hard anodized forged pistons with Grafal low-friction coating * Manley H-beam connecting rods with ARP2000 bolts * 2018+ (Gen 3) production block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength * Accepts Gen 1, 2, 3 or GT350 cylinder heads with corresponding generation head gasket * Assembled and ready for Coyote heads, cams, timing set, and oil system
Not Yet Reviewed
$5,947.99
—
$7,149.99
Ford Performance Parts 5.0L Coyote Gen 4 Aluminator SC Crate Engines
Built for high performance applications, the Ford Performance 5.0L Coyote Gen 4 Aluminator SC crate engines are a powerhouse—ideal for custom race builds and 2024 GT Mustangs. While the Aluminator block, cylinder heads, oil pan, and intake manifold are factory pieces, Ford Performance replaces the hypereutectic pistons and sintered-steel rods with Mahle forged slugs, ARP 2000 rod bolts, and Manley forged H-beam rods, keeping the factory 12.0:1 compression ratio in naturally aspirated form and 9.5:1 on its boost-ready Aluminator crate. These flagship crates are quite popular with Ford diehards in the custom car and street rod world—because who really wants to put a Chevy LS in a deuce coupe? Crate engine features and specs: * Fits 2024+ Mustang GT * 5.0L (302 cubic inches) * 9.5:1 compression ratio (nominal) * Mahle hard anodized forged pistons with Grafal low friction coating * Manley H-beam connecting rods with ARP 2000 bolts * Forged steel crankshaft * Uses production 2024 Mustang GT aluminum block * 2024+ Production oil pan * Tuned composite Mustang GT intake manifold with production dual drive-by-wire 80mm throttle bodies with variable runner control * Four-valve-per-cylinder aluminum heads with roller-finger followers reduce friction. * Mustang GT production camshafts * Includes Ford Performance colder, heat range zero spark plugs (M-12405-M50A) * Includes Ford Performance oil filter (M-6731-FL820) * Includes billet steel gerotor oil pump gears (M-6600-M50A) * Vehicle harness and PCM not included * Does not include alternator (for alternator kit: refer to part numbers M-8600-M50BALT or M-8600-M50ALTA) * Engine mount bosses and bell housing mount pattern common to 4.6L modular engines * Does not include exhaust manifolds
Not Yet Reviewed
$15,262.99
BluePrint Engines Pro Series Mopar 426 C.I.D. 610 HP EFI Deluxe Dressed Long Block Crate Engines
BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 610 hp and 525 lbs.-ft. of torque. The engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW OEM Hellcat engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crankshaft 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Holley Terminator engine harness Fuel injection Throttle body Harmonic balancer Fabricated intake Manifold Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Fuel Injected -- Spark Plug: NGK 97408/ LZTR6AP11EG -- Spark Plug Gap: .043 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Fabricated Aluminum Gen III HEMI -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$19,399.00
—
$19,499.00
BluePrint Engines Pro Series Mopar 426 C.I.D. 872 HP EFI Deluxe Dressed Long Block Crate Engines
BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 872 hp and 764 lbs.-ft. of torque. These engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crank 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Whipple 3.0L supercharger Supercharger fluid reservoir Hellcat throttle body Harmonic balancer Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Whipple 3.0L supercharger -- Spark Plug: NGK 5107 -- Spark Plug Gap: .025 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Supercharger -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$27,799.00
BTR HyperDrive Front Drive Kits
The wait for the best possible Front Engine Accessory Drive (FEAD) kit is over! BTR HyperDrive systems offer the latest advancement in cost-effective, but premium drive systems that give you more features for less. These comprehensive kits deliver a clean, professional appearance with everything you need--adapters, gaskets, belt, thermostat, water and power steering pumps, hardware, and pulleys. All you need to add is your plumbing and wiring. Select a BTR base or SFI HyperDrive front drive kit designed for your engine. Features, benefits, and more: * Compact, clean, and efficient packaging lets you focus on your engine, not your accessories * Bracket-less design means less clutter, less fasteners, less total parts for an easy clean look * Comprehensive true black components and hardware for a clean look, and also available with billet pulley and tensioner dress-up kits * Base kits include a genuine Dayco Power Bond damper/pulley * SFI kits use an authentic ATI damper and BTR anodized billet crank pulley * Engine swap friendly in every way: -- Super compact design keeps accessories out of most frame rails, suspension components and steering setups -- 3-position clockable lower radiator hose connection -- Shorter radiator and heater hose barb connections for easier hose routing in tight applications -- Machinable area on water manifold to relocate heater hose lines downward for added clearance * Not just for looks: -- SFI/Race-ready kits available -- All kits allow for temporary or permanent A/C and/or P/S deletes with simple belt swaps, if desired -- Performance designed accessories are all high-rpm 6,500+ ready -- LS, LT, LV, and L8T application support (except LS/LT dry sump and supercharged) * Premium BTR accessories: -- OEM-quality LT cartridge-style BTR water pump utilizes a "mechanical" seal for long life, and superior sealing at high rpms -- USA-made 150-amp BTR alternator provides high idle amperage through its square wire hairpin design -- Aluminum BTR Saginaw Type II power steering pump is the latest ball bearing design and features a baffled fluid reservoir -- SD7-type BTR mini-A/C compressor is a high efficiency 7-piston with amazing durability and high-rpm resilience
Not Yet Reviewed
$2,133.99
—
$3,098.99
Eddie Motorsports Raven Series Pro Touring S-Drive Serpentine Pulley Drive Systems
Change the appearance and performance of your engine with Eddie Motorsports Raven Series Pro Touring S-Drive serpentine pulley drive systems. Constructed from billet aluminum for optimum strength, corrosion resistance, and longevity, these multi-component systems include an aluminum water pump, Powermaster 170 amp alternator, Gates V-belts, and all necessary stainless steel hardware. GM type II power steering pumps and Sanden-style SD7 A/C compressors are used on units with power steering or air conditioning. Anodized or powdercoated systems feature black semi-gloss enamel painted components and black fasteners. Choose from the options and fitment for your specific application—then enjoy the incredible performance, exceptional style, and tough construction of the Raven Series Pro Touring S-Drive serpentine pulley drive systems from Eddie Motorsports.
Not Yet Reviewed
$3,845.95
Eddie Motorsports Raven Series V-Drive V-Belt Pulley Drive Systems
Tough, beautiful, and powerful are all words that come to mind when looking into Eddie Motorsports Raven Series V-Drive V-belt pulley drive systems. These multiple-component systems are constructed from billet aluminum for optimum strength, corrosion resistance, and longevity. They include an aluminum water pump, Powermaster 170 amp alternator, Gates V-belts, and all necessary stainless steel hardware. GM type II power steering pumps and Sanden-style SD7 A/C compressors are used on units with power steering or air conditioning. Anodized or powdercoated systems feature black semi-gloss enamel painted components and black fasteners. Choose the options and fitment for your specific application—then enjoy the incredible performance, exceptional style, and tough construction of Eddie Motorsports V-Drive V-belt pulley drive systems.
( 4 )
$1,865.95
—
$2,470.95
Eddie Motorsports Pro Touring S-Drive Serpentine Pulley Drive Systems
Eddie Motorsports Pro Touring S-Drive serpentine pulley drive systems will change the appearance and performance of your engine. These multiple-component systems are constructed from billet aluminum for optimum strength, corrosion resistance, and longevity. They include an aluminum water pump, Powermaster 170 amp alternator, Gates V-belts, and all necessary stainless steel hardware. GM type II power steering pumps and Sanden-style SD7 A/C compressors are used on units with power steering or air conditioning. These Pro Touring S-Drive serpentine pulley drive systems are offered in raw machined or highly polished finish, as well as a variety of anodized or Fusioncoat colors. Choose from the available options and fitment for your specific application—then enjoy the incredible performance, exceptional style, and tough construction of Eddie Motorsports Pro Touring S-Drive serpentine pulley drive systems.
Not Yet Reviewed
$3,625.95
—
$3,735.95
On Sale
Holley Mid-Mount Complete Accessory Systems
Holley Mid-Mount complete accessory systems achieve what no other accessory bracket systems do--eliminate the brackets! This pulls in all the accessories tighter than other accessory drives by bolting directly to other components for a clean, integrated form. They offer superb engine visibility to show off your horsepower, not your accessories. Holley Mid-Mount complete accessory systems are available in several versions and finishes to match your application. Order the kit designed to fit your engine.
( 107 )
$4,714.95
$3,148.95
—
$4,560.95
Vintage Air Chevy Front Runner Engine Drive Systems
Vintage Air has all-in-one Front Runner engine drive systems for your small block and big block Chevy! With their focus on performance, Vintage Air engineered their Chevy Front Runner systems to be compact, strong, and good-looking. These drive systems are available for power steering with or without pump and non-power steering applications. Vintage Air Chevy Front Runner engine drive systems utilize a spring-loaded tensioning system for no-nonsense, trouble-free operation and may include: * CNC-machined billet truss-type mounting bracket * High performance water pump * Delphi-Saginaw power steering pump * 140 amp alternator * Optimized-ratio pulleys * ARP hardware * Dayco serpentine belt and OEM tensioner * Compressor clutch and tensioner covers
( 44 )
$2,466.99
—
$2,784.99
Vintage Air Ford Front Runner Engine Drive Systems
Vintage Air offers their totally cool Front Runner engine drive systems for your small block Ford! With a unique design focused on performance, Vintage Air Ford systems are strong, compact, and extremely good looking. They feature a patented, one-piece, forged aluminum timing cover with integral accessory mounts and utilize a spring-loaded tensioning system for no-nonsense, trouble-free operation. Systems are available for power steering with or without pump and non-power steering applications in your choice of bright or black hard coat finishes. Vintage Air Ford Front Runner engine drive systems may include: * ARP stainless 12-point bolt and hardware * 170 amp alternator * Dayco OEM tensioner * Timing cover gasket set * Dayco serpentine drive belt * Power steering pump * 4-bolt crankshaft pulley * High performance water pump * Water pump pulley * Power steering pump pulley
( 11 )
$3,065.99
Vintage Air LS Chevy Front Runner Engine Drive Systems
Vintage Air offers all-in-one Front Runner engine drive systems for your LS Chevy! Focusing on race technology and performance, their LS Front Runner systems provide a more dependable serpentine belt design in a super compact block mounted package. Being the smallest component package available, engine swaps into older vehicles is a lot easier! Vintage Air drive systems are available for power steering with or without pump and non-power steering applications in your choice of bright or black hard coat finishes. Vintage Air LS Front Runner systems may include: * CNC-machined billet truss-type mounting bracket * High performance water pump * Delphi-Saginaw power steering pump * 140 amp alternator * Optimized-ratio aluminum pulleys * ATI harmonic balancer * ARP polished stainless hardware * Dayco serpentine belt and OEM tensioner * Compressor clutch and tensioner covers
( 7 )
$3,414.99
Top Street Performance Serpentine Front Drive Systems
Top Street Performance serpentine front drive systems are designed for performance, efficiency, and style, plus they're sure to turn heads. If you are looking for a way to dress up your engine swap, look no further. TSP front drive systems come with everything you need, and are offered with black or polished components, with or without an integral power steering reservoir. Features include: * Billet aluminum brackets and pulleys * High-flow water pump * A/C compressor * 160-amp alternator * Power steering pump * Custom designed belt tensioner * Installation hardware * Instruction manual
( 2 )
$1,876.54
—
$1,925.94
