Availability
These ATK High Performance Chevy LS 408 short blocks are made to handle some serious power. The foundation of any high performance engine is a rock-solid short block, so ATK designed and developed these to be just that. They feature a fully forged, balanced, and blueprinted rotating assembly that is available in a variety of configurations to fit naturally aspirated, nitrous, and forced induction builds, as well as those with 24 and 58-tooth cranks. These ATK High Performance Chevy LS 408 short blocks include the following: * GM LS Iron blocks * Aligned and hone main bores * Manley 4340 forged crankshaft * 4.00 in. stroke * Manley 4340 H-beam connecting rods * Manley forged pistons
( 4 )
$4,828.99
—
$5,143.99
Clearance
VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.
( 73 )
$2,366.99
Clearance
ATK High Performance GM 383 Stroker 435 hp Stage 3 long block crate engines with EFI are designed for better driveability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. They are dyno-tested with your EFI system and ready to go! Typically ATK GM 383 Stroker 435 hp complete long blocks consist of: * Seasoned OE block with 4-bolt mains * OE cast crankshaft * 4340 forged I-beam connecting rods * Forged pistons * Chromoly piston rings * Hydraulic roller camshaft * Dart SHP aluminum cylinder heads * Billet roller rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor HEI * Long water pump * Front damper * FiTech Go EFI 4-600 hp * Spark plugs and wires * Dyno test/tune
( 1 )
$7,098.99
$5,999.50
Give your ride the extra twist only a stroker can deliver with ATK High-Performance GM 383 Stroker 435 hp Stage 1 long block crate engines. These engines feature quality components and professional assembly to give your car or truck the kick it needs. They produce up to 475 ft.-lbs. of torque—that's enough to get you rolling in a cloud of tire smoke! ATK GM 383 Stroker 435 hp Stage 1 long block crate engine specs: * Seasoned OE 4-bolt main roller block * 4.040 x 3.750 bore/stroke * 383 c.i.d. displacement * Scat nodular iron crankshaft (3.750 in. stroke; one-piece; externally balanced rear/internal front) * Scat 4340 forged I-beam connecting rods (5.700 in.) with ARP bolts * Forged flat-top pistons with two valve reliefs * Moly piston rings with 10.1:1 compression ratio * Hydraulic roller camshaft with 220/224 duration at 0.050, 0.528 in./0.536 ex. Lift, 112LSA * Installed camshaft bearings clocked to OEM position * Dart SHP aluminum cylinder heads with 72cc/180cc port volume and 2.02/1.60 in. valves * Installed and sealed brass freeze plugs (oil galley plugs also installed and sealed) * Billet aluminum 1.6 ratio full roller rocker arms * 5 qt. OE oil pan * 350 lbs.
Not Yet Reviewed
$4,998.99
Give your ride the extra twist only a stroker can deliver with ATK High-Performance GM 383 Stroker 435 hp Stage 2 long block crate engines. These mid-dressed (Stage 2) engines perform well on the street or strip and may include (among other parts) an intake manifold, carburetor, water pump, harmonic balancer/damper, and flexplate or flywheel. They produce up to 475 ft.-lbs. of torque—that's enough to get you rolling in a cloud of tire smoke! ATK GM 383 Stroker 435 hp Stage 2 long block crate engine specs: * Seasoned OE 4-bolt main roller block * 4.040 x 3.750 bore/stroke * 383 c.i.d. displacement * Scat nodular iron crankshaft (3.750 in. stroke; one-piece; externally balanced rear/internal front) * Scat 4340 forged I-beam connecting rods (5.700 in.) with ARP bolts * Forged flat-top pistons with two valve reliefs * Moly piston rings with 10.1:1 compression ratio * Hydraulic roller camshaft with 220/224 duration at 0.050, 0.528 in./0.536 ex. Lift, 112LSA * Installed camshaft bearings clocked to OEM position * Dart SHP aluminum cylinder heads with 72cc/180cc port volume and 2.02/1.60 in. valves * Installed and sealed brass freeze plugs (oil galley plugs also installed and sealed) * Billet aluminum 1.6 ratio full roller rocker arms * 5 qt. OE oil pan * 375 lbs.
Not Yet Reviewed
$5,698.99
Give your ride the extra twist only a stroker can deliver with ATK High-Performance GM 383 Stroker 435 hp Stage 3 long block crate engines. These fully-dressed (Stage 3) engines perform well on the street or strip and include all the Stage 2 components. They may also add in the following parts (among others): carburetion, filters, and a spark system to help produce up to 475 ft.-lbs. of torque—that's enough to get you rolling in a cloud of tire smoke! ATK GM 383 Stroker 435 hp Stage 3 long block crate engine specs: * Seasoned OE 4-bolt main roller block * 4.040 x 3.750 bore/stroke * 383 c.i.d. displacement * Scat nodular iron crankshaft (3.750 in. stroke; one-piece; externally balanced rear/internal front) * Scat 4340 forged I-beam connecting rods (5.700 in.) with ARP bolts * Forged flat-top pistons with two valve reliefs * Moly piston rings with 10.1:1 compression ratio * Hydraulic roller camshaft with 220/224 duration at 0.050, 0.528 in./0.536 ex. Lift, 112LSA * Installed camshaft bearings clocked to OEM position * Dart SHP aluminum cylinder heads with 72cc/180cc port volume and 2.02/1.60 in. valves * Installed and sealed brass freeze plugs (oil galley plugs also installed and sealed) * Billet aluminum 1.6 ratio full roller rocker arms * 5 qt. OE oil pan * 430 lbs.
( 4 )
$6,498.99
Scat forged standard weight crankshafts are designed for street or race engines with substantially increased horsepower. These crankshafts are precision-ground, heat-treated, shot-peened, inspected, and micro-polished for superior tolerance control. Scat crankshafts are also nitride-hardened for superior wear resistance, have straight-shot and chamfered oil holes, and feature lightening holes in all rod throws. They also have a large radius on all journals for improved strength and wear resistance. Scat forged standard weight crankshafts are available in dozens of sizes and configurations for fitment on vehicles spanning seven decades.
( 25 )
$1,028.99
Give your car or truck a little more punch with one of these ATK High Performance GM 350 Vortec 350 hp Stage 2 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure they are great-running, reliable engines that will get you back on the road. Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 *Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump Recommended components: * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine Info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers
( 8 )
$3,688.99
BluePrint Engines GM 454 C.I.D. 460 HP Cruiser Dressed Long Block crate engines are available in three different models—two with complete front accessory drives. All models deliver 460 hp and 479 lbs.-ft of torque; and feature aluminum heads, hydraulic roller cam, forged crank, hypereutectic pistons, and a compression ratio of 9.85 to 1. Additional specifications include: * BLOCK: NEW BluePrint Cast Iron Block, 454 BBC Manufactured and Machined in the USA 4-Bolt Main 4.250 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Standard Deck * ROTATING ASSEMBLY: New BluePrint Forged Crankshaft 4.000 in. Stroke, 4.250 in. Bore 6.135 in. connecting rods with 150,000 psi bolts Hypereutectic pistons External * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 119cc chamber 2.30 in. intake/1.88 in. exhaust valves 316cc intake/124cc exhaust runners Cylinder heads feature a .300 in. raised exhaust port vs. an OEM casting Must verify header/exhaust clearance * CAM SPECS: Cam Type: Roller .501 Intake .510 Exhaust 216 Intake / 228 Exhaust duration @ .050 - 112 degree lobe separation * IGNITION TIMING: 10-16 degrees initial and total timing 32-36 degrees at 3,500 rpm * ALSO INCLUDES: Intake Manifold single plane, satin aluminum 750cfm Carburetor Valve covers, oil pan and timing cover Dyno test results shipped with engine 30 month / 50,000 mile warranty * NOTES: This engine is an excellent cruiser and daily driver engine. This engine makes up to 15 in. of vacuum, and is designed to work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel. Features External 42.5 oz. imbalance. Recommend GM flywheel 14096987, or TCI flexplate 399973. INCLUDED ONLY WITH MODEL BP454CTCK: * Installed polished complete front accessory drive system with A/C, P/S, WP, all belts and pulleys. INCLUDED ONLY WITH MODEL BP454CTCKB: * Installed black complete front accessory drive system with A/C, P/S, WP, all belts and pulleys.
( 2 )
$9,949.00
—
$12,049.00
Give your car or truck a little more punch with ATK High Performance GM 350 Vortec 350 hp Stage 3 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure that they are great-running, reliable engines that will get you back on the road. Engine Specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 *Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine Info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers
( 1 )
$4,624.99
Chevrolet Performance has recreated the classic L88 Big Block combination in the ZZ427/480 long block crate engine. Rated at 480 hp, it features an iron block, forged steel crankshaft, and high-flow aluminum cylinder heads. An upgraded hydraulic roller camshaft improves drivability and rpm range, while lower 10.1:1 compression means you can enjoy the power on pump gas, too. The ZZ427 comes complete with: high-flow oval port heads, a high-lift camshaft, aluminum intake manifold, 770 cfm Holley carburetor, an HEI distributor, aluminum water pump, balancer, spark plug wires, and a 14 in. flexplate. If you're looking for a modern version of the classic L88, the Chevrolet Performance ZZ427/480 long block crate engine is the answer. Additional specs and features include: * 4.250 in. bore with 3.750 in stroke * Cast iron block with 4-bolt main caps * Forged steel crankshaft * Forged steel connecting rods * Forged aluminum pistons * Hydraulic roller camshaft: - Valve lift .527 in. intake/.544 in. exhaust - Duration (.050 in) 224 intake/ 234 exhaust * Aluminum oval port heads with 110cc chambers * 2.190 in. intake/1.880 in. exhaust valves * 10.1:1 compression ratio * Aluminum 1.7:1 ratio roller rocker arms * HEI distributor * 770 cfm carburetor * Aluminum short water pump * Ignition timing base 10 degrees BTDC, 36 degrees total * 6,400 maximum recommended rpm
( 5 )
$16,940.27
Meet the newest member of the iconic 350-based ZZ engine family—ZZ6! Chevrolet Performance has rated these base crates to really deliver the power, thanks in part to their unique, lightweight aluminum cylinder heads that enable optimal airflow at high rpm. The engines are based on the proven Fast Burn design with large intake runners and valves. Along with their beehive-style valve springs that offer high-rpm efficiency and durability, the ZZ6 blocks make the most of every cubic inch of air drawn through them. Supporting the massive flow of air is an aggressive hydraulic roller camshaft and a forged steel crankshaft. The ZZ6 350 c.i.d. base crate engine kit includes intake manifold, distributor, water pump, damper, flexplate, and the distinctive, race-inspired valve covers. The legendary ZZ6 tech specs are: * Cast iron block with 4-bolt mains * Bore x stroke: 4.000 x 3.48 * Valve lift (in.): .474 intake/.510 exhaust * Camshaft duration at .050 in.: 208 degree intake/221 degree exhaust * Valve size (in.): 2.000 intake/1.550 exhaust * Compression ratio is 9.72:1 nominal * Aluminum roller-style rocker arms * Rocker arm ratio is 1.5:1 * Recommended fuel: Premium pump * Distributor: HEI * Ignition timing: 36 degree total @ 4,000 rpm * Maximum recommended rpm: 5,800 * Balance: external
Not Yet Reviewed
$9,126.05
You can now get modern street performance in a classic small block package by installing a Chevrolet Performance SP350 385 HP turn-key crate engine. They put out 385 HP and 405 lbs.-ft. of torque for a thrilling feeling of immediate performance. The long block crate engines feature new lightweight aluminum cylinder heads based on the proven Fast Burn design—with large intake runners, and 2 in. diameter intake and 1.55 in. exhaust valves. New beehive-style valve springs enable greater high-rpm performance and durability—as the egg-shaped springs have less reciprocating mass in motion, require less spring pressure for greater valve control, and handle valvetrain stresses more efficiently. Additional features and specs of the Chevrolet Performance SP350 turn-key crate engine: * Forged steel crankshaft * Powdered metal connecting rods * Hypereutectic pistons (9.6:1 compression ratio) * Hydraulic roller camshaft: .474 intake/.510 exhaust lift, 208 intake/221 exhaust duration at 0.050 in. * 1.5 ratio stamped steel rocker arms * Externally balanced * 36 degree total timing at 4,000 RPM * Aluminum intake manifold * Chevrolet Performance valve covers * HEI distributor * Spark plugs * Water pump * Harmonic balancer * Timing cover * Oil pan * Flexplate: 153-tooth, 12.750 in. diameter * Starter * Fuel pump * Air conditioning pump * Alternator * Front-end accessory drive kit (not installed)
Not Yet Reviewed
$12,667.94
Chevrolet Performance ZZ6 EFI Turnkey crate engines build on more than 65 years of small block heritage and the legacy of the pioneering "ZZ" crate engine family to offer thoroughly modern performance balanced with traditional style. The engineers adapted a unique, electronically controlled port fuel injection system to the ZZ6 350, using an aluminum intake manifold that has the appearance of a carbureted intake. A fuel injection throttle body mounted in place of the carburetor allows a traditional air cleaner to be installed. The result is a great, traditional appearance and all the drivability advantage of EFI on the highway. A simple plug-and-play control system rounds out the package to get the engine running in your project without the need for third-party tuning. These Turnkey crate engine kits include the distributor and damper installed. The throttle body, air conditioning pump, alternator, single-belt front-end accessory drive kit, and more are also included. Installation notes: * Crate engine kit includes pre-programmed, self-learning control system * Comes with 12.750 in. externally balanced 153-tooth automatic transmission flexplate. Requires externally balanced flywheel for manual transmission. * Not intended for marine applications. SPECIFICATIONS: Engine Type: Chevy Small Block V8 420 hp at 5800 rpm 408 lb.-ft. at 4500 rpm Displacement (cu. in.): 350 Bore x Stroke (in.): 4.000 x 3.480 Block: Cast iron with 4-bolt main caps Crankshaft: Forged steel, shot peened Connecting Rods: Forged powdered metal Pistons: Hypereutectic aluminum Camshaft Type: Steel hydraulic roller Valve Lift (in.): .474 intake / .510 exhaust Camshaft Duration (at .050 in.): 208 degree intake / 221 degree exhaust Cylinder Heads: Fast Burn aluminum; 62cc chambers Valve Size (in.): 2.000 intake / 1.550 exhaust Compression ratio: 9.72:1 nominal Rocker Arms: Aluminum; roller-style Rocker Arm Ratio: 1.5:1 Recommended Fuel: Premium pump Ignition Timing: 36 degree total at 4,000 rpm Maximum Recommended RPM: 5,800 Balanced: External Flexplate: 12.750 in.
Not Yet Reviewed
$13,672.14
BluePrint Engines GM 454 C.I.D. 460 HP Cruiser Long Block crate engines deliver 460 hp and 479 lbs.-ft. of torque. They feature aluminum heads, hydraulic roller cam, cast crank, hypereutectic pistons, and a compression ratio of 9.85 to 1. Additional specifications include: * BLOCK: NEW BluePrint Cast Iron Block, 454 BBC Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Stroke, Bored .060 in. over 1-Piece Rear Main Seal Mech fuel pump provision: Yes Standard Deck * ROTATING ASSEMBLY: New BluePrint CastCrankshaft 4.000 in. Stroke, 4.250 in. Bore OEM type 6.135 in. connecting rods with 150,000 psi bolts Hypereutectic pistons External * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 119cc chamber 2.30 in. intake/1.88 in. exhaust valves 316cc intake/124cc exhaust runners Cylinder heads feature a .300 in. raised exhaust port vs. an OEM casting Must verify header/exhaust clearance * CAM SPECS: Cam Type: Roller .501 Intake .510 Exhaust 216 Intake / 228 Exhaust duration @ .050 - 112 degree lobe separation * IGNITION TIMING: 10-16 degrees and total timing 32-36 degrees at 3,500 rpm * ALSO INCLUDES: Valve covers, oil pan and timing cover Dyno test results shipped with engine 30 month / 50,000 mile warranty
( 1 )
$9,099.00
ATK High Performance GM 350 Vortec 350 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you'll need is to supply is the fuel system--inline, in-tank, or the FiTech Fuel Command Center. They're dyno-tested with your EFI system and ready to go! Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc. seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @ 50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * EFI System: Fitech Go Street EFI 400HP (throttle body, wire harness and hand held unit included) * Fuel Pump: Not Provided - must run electric pump or mechanical fuel pump with Fitech fuel command center * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine info: * Oil: Conventional/Non Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 headers
( 2 )
$5,198.99
Chevrolet Performance SP350 385 HO crate engines use the proven ZZ4 short block and ads to it the Fast Burn aluminum cylinder heads for 375 value packed horsepower. With value in mind, these crate engines use stamped steel rocker arms and the same ZZ4 camshaft that powers thousands of hot rods. The SP350 385 HP crate engines are an excellent choice for the basis of a custom engine. They are strong forged steel crankshaft and forged powdered metal connecting rods have been proven to 500 horsepower—and its Fast Burn cylinder heads are hungry for a little more cam. Value priced small-block power, great durability, easy power upgrades—the SP350 385 HP crate engine is all that and more from the "more than just power" people at Chevrolet Performance. Specifications: * Power: 385 hp @ 5600 rpm, 405 lbs.-ft. of torque @ 3600 rpm * Displacement: 350 c.i.d., 5.7L * Bore x Stroke: 4.00 in. x 3.48 in. * Compression Ratio: 9.6:1 * Recommended Fuel: 92 Octane * Block: cast iron, one-piece rear seal, 4-bolt main caps * Crankshaft: forged steel * Connecting Rods: powdered metal steel * Pistons: hypereutectic aluminum * Camshaft: steel hydraulic roller tappet * Cam Lift: .474 in. intake/.510 in. exhaust * Cam Duration @ .050 in.: 208 deg. intake/221 deg. exhaust * Lobe Separation: 112 degree * Cylinder Heads: dual bolt pattern Fast Burn aluminum, 3/8 in. screw-in rocker studs * Combustion Chamber: 62cc * Valves: .200 in. intake/1.55 in. exhaust * Rocker Arms: stamped steel, 1.5:1 Ratio * Valve Springs: LS Beehive 12625033 * Balance: external * Maximum GM recommended rpm: 5800 * GM recommended torque converter: 3000-3400 Stall * Ignition Timing: base 10 degrees BTDC, 36 degrees total @ 4000 rpm Engine includes: * Fully GM assembled long block * Polished aluminum valve covers * Oil pump, pick-up and oil pan * Aluminum performance intake * HEI distributor and spark plugs * 12 3/4 in. auto trans flexplate * 8 in. harmonic balancer * Front timing cover * Cast-iron long water pump * Oil filter and adapter * Passenger side RH oil dipstick and tube
Not Yet Reviewed
$7,761.78
Bring your ride to life with ATK High Performance Ford 302 375 hp Stage 2 long block crate engines. These engines are based on the tried and true Ford 302 and are built to perform. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, tired engine or just looking for a little more performance, ATK has you covered. Details and specs: * 375 hp/380 lbs.-ft. * Compression Ratio: 9.5:1 * ATK Aluminum heads * Hydraulic roller cam * Cast steel crankshaft 50oz external balance * Hypereutectic pistons * Seasoned OE roller block 1987-1995 * 4.040 in. bore x 3.000 in. stroke * One-piece rear main seal * Mechanical fuel pump provision * Dual sump oil pan HP08C, Front sump oil pan HP78C * Melling high volume oil pump * Double roller timing set * Left Hand inlet reverse rotation water pump (HP08C) * Right Hand inlet standard rotation water pump (HP78C) * 50oz external balancer * TCI 529610 157 tooth flexplate with 50oz balance * Edelbrock Performer RPM dual plane intake 7121 * Pro Billet distributor with melonite gear Cylinder Heads: * ATK aluminum cylinder heads * 58cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 185cc intake runners * 1.6 aluminum roller rockers Roller Cam specs: * .512 intake/.512 exhaust * 220 intake/224 exhaust duration @ .050 - 112-degree lobe separation Recommended: * 34-36 degrees total timing * 13726548 firing order * Autolite 3923 spark plugs 0.035 gap * 8mm Spark plug wires * 680 cfm carburetor * Mechanical 80 GPH Fuel pump * 2,400-2,800 Stall converter * 91 plus octane fuel
( 2 )
$5,866.99
Bring your ride to life with ATK High Performance Ford 302 375 hp Stage 1 long block crate engines. These engines are based on the tried and true Ford 302 and are built to perform. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, tired engine or just looking for a little more performance, ATK has you covered. Details and specs: * 375 hp/380 lbs.-ft. * Compression Ratio: 9.5:1 * ATK Aluminum heads * Hydraulic roller cam * Cast steel crankshaft 50oz external balance * Hypereutectic pistons * Seasoned OE roller block 1987-1995 * 4.040 in. bore x 3.000 in. stroke * One-piece rear main seal * Mechanical fuel pump provision * Dual sump oil pan HP08, Front sump oil pan HP78 * Melling high volume oil pump * Double roller timing set Cylinder Heads: * ATK aluminum cylinder heads * 58cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 185cc intake runners * 1.6 aluminum roller rockers Roller Cam specs: * .512 intake/.512 exhaust * 220 intake/224 exhaust duration @ .050 - 112-degree lobe separation Recommended: * 34-36 degrees total timing * 13726548 firing order * Left Hand inlet reverse rotation water pump (HP08) * Right Hand inlet standard rotation water pump (HP78) * Autolite 3923 spark plugs 0.035 gap * 8mm Spark plug wires * 2,400-2,800 Stall converter * 1,500-6,500 dual plane intake * 80 GPH Fuel pump * 91 plus octane fuel * 680 cfm carburetor
Not Yet Reviewed
$4,765.99
—
$4,790.99
ATK High Performance Ford 302 375 hp Stage 3 long block crate engines with EFI are designed to have great street manners and will work with most stock components. Teamed up with FiTech Self-Learning EFI systems, these ATK engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. Plus, they are dyno-tested with your EFI system and ready to go! Details and specs: * 375 hp/380 lbs.-ft. * Compression Ratio: 9.5:1 * FiTech Go Street EFI (wire harness and handheld unit included) * ATK Aluminum heads * Hydraulic roller cam * Cast steel crankshaft 50oz external balance * Hypereutectic pistons * Seasoned OE roller block 1987-1995 * 4.040 in. bore x 3.000 in. stroke * One-piece rear main seal * Front sump oil pan * Melling high volume oil pump * Double roller timing set * Right Hand inlet standard rotation water pump * 50oz external balancer * TCI 529610 157 tooth flexplate with 50oz balance * Edelbrock Performer RPM dual plane intake 7121 * Pro Billet distributor with melonite gear (MSD ignition box required for tach signal) * Autolite 3923 spark plugs 0.035 gap * 8mm Spark plug wires Cylinder Heads: * ATK aluminum cylinder heads * 58cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 185cc intake runners * 1.6 aluminum roller rockers Roller Cam specs: * .512 intake/.512 exhaust * 220 intake/224 exhaust duration @ .050 - 112-degree lobe separation Recommended: * 2,400-2,800 Stall converter * 34-36 degrees total timing * 13726548 firing order * 91 plus octane fuel
Not Yet Reviewed
$7,284.99
Bring your ride to life with ATK High Performance Ford 302 370 hp Stage 3 long block crate engines. These engines are based on the tried and true Ford 302 and are built to perform. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, tired engine or just looking for a little more performance, ATK has you covered. Details and specs: * 375 hp/380 lbs.-ft. * Compression Ratio: 9.5:1 * ATK Aluminum heads * Hydraulic roller cam * Cast steel crankshaft 50oz external balance * Hypereutectic pistons * Seasoned OE roller block 1987-1995 * 4.040 in. bore x 3.000 in. stroke * One-piece rear main seal * Mechanical fuel pump provision * Dual sump oil pan HP08C, Front sump oil pan HP78C * Melling high volume oil pump * Double roller timing set * Left Hand inlet reverse rotation water pump (HP08C) * Right Hand inlet standard rotation water pump (HP78C) * 50oz external balancer * TCI 529610 157 tooth flexplate with 50oz balance * Edelbrock Performer RPM dual plane intake 7121 * Pro Billet distributor with melonite gear * Autolite 3923 spark plugs 0.035 gap * 8mm Spark plug wires * Quick Fuel 680 cfm carburetor with vacuum secondary's and electric choke * Mechanical 80 GPH Fuel pump Cylinder Heads: * ATK aluminum cylinder heads * 58cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 185cc intake runners * 1.6 aluminum roller rockers Roller Cam specs: * .512 intake/.512 exhaust * 220 intake/224 exhaust duration @ .050 - 112-degree lobe separation Recommended: * 2,400-2,800 Stall converter * 34-36 degrees total timing * 13726548 firing order * 91 plus octane fuel
Not Yet Reviewed
$6,674.99
Pack Vortec power and stroker torque in your ride with ATK High Performance GM 383 Vortec 390 hp Stage 3 long block crate engines. These engines are hand-built and balanced to ensure a strong-running, reliable engine for your daily driver or hot rod. The 460 ft.-lbs. of twist make these extremely versatile mills that are at home in a towing rig, muscle car, or street rod. Get back out on the road with the ground-pounding power that only a stroker can give you. Engine specifications: * HP: 390 * TQ: 460 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.750 in. * Displacement: 383CI * Crankshaft: Scat nodular iron external balance rear of crank/internal balance front of the crank * Rods: Scat I Beam 5.7 in. rods with ARP 8740 bolts * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Dart vortec cast iron 67cc/165cc 2.02/1.60 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 (with scat kit) * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers
Not Yet Reviewed
$5,998.99
BluePrint Engines GM 454 C.I.D. 460 HP Cruiser Dressed Long Block crate engines with fuel injection are available in three models—two with complete front accessory drive systems. All engines deliver 460 hp and 479 lbs.-ft. of torque. They feature aluminum heads, hydraulic roller cam, forged crank, hypereutectic pistons, and a compression ratio of 9.85 to 1. Additional specifications include: * BLOCK: NEW BluePrint Cast Iron Block, 454 BBC Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Stroke, Bored .060 in. over 1-Piece Rear Main Seal Mech fuel pump provision: Yes Standard Deck * ROTATING ASSEMBLY: New BluePrint Forged Crankshaft 4.000 in. Stroke, 4.250 in. Bore OEM type 6.135 in. connecting rods with 150,000 psi bolts Hypereutectic pistons External * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 119cc chamber 2.30 in. intake/1.88 in. exhaust valves 316cc intake/124cc exhaust runners Cylinder heads feature a .300 in. raised exhaust port vs. an OEM casting Must verify header/exhaust clearance * CAM SPECS: Cam Type: Roller .501 Intake .510 Exhaust 216 Intake / 228 Exhaust duration @ .050 - 112 degree lobe separation * IGNITION TIMING: 10-16 degrees initial and total timing 32-36 degrees at 3,500 rpm * ALSO INCLUDES: Intake Manifold single plane, satin aluminum Holley Sniper 2 EFI System Pro Billet Distributor Harmonic balancer Valve covers, oil pan and timing cover Dyno test results shipped with engine 30 month / 50,000 mile warranty * NOTES: This engine is an excellent cruiser and daily driver engine. This engine makes up to 15 in. of vacuum, and is designed to work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel. Features External 42.5 oz. imbalance. Recommend GM flywheel 14096987, or TCI flexplate 399973. -- INCLUDED ONLY ON MODEL BP454CTFKB: * Installed black complete front accessory drive system with A/C, P/S, WP, all belts and pulleys. -- INCLUDED ONLY ON MODEL BP454CTFK: * Installed polished complete front accessory drive system with A/C, P/S, WP, all belts and pulleys.
Not Yet Reviewed
$10,999.00
—
$13,049.00
ATK High Performance Ford 502 545 HP Stage 3 EFI long block crate engines are based on dyno-proven combinations built with name brand parts. Here are product details: Engine Specifications: * HP: 545 * TQ: 595 * Block: Seasoned OE block 1987-92 * Bore/Stroke: 4.400 x 4.150 * Displacement: 502 * Crankshaft: Scat nodular iron internal balance * Rods: Scat 4340 forged I-beam with ARP 8740 bolts * Pistons: Hypereutectic 9.5.1 compression * Rings: Moly * Camshaft: Hydraulic flat tappet * Cam specs: 253/253 at 50 .585in/.585ex 110LSA * Timing chain: Double roller * Cylinder heads: Edelbrock performer RPM aluminum 75cc/292cc 2.190/1.760 * Rocker arms: Stainless steel 1.73 ratio * Oil pan: Front sump * Oil pump: Melling high volume * Balancer: PowerBond internal balance PB1210-N * Flexplate/Flywheel: Pioneer internal balance FRA-207 * Intake manifold: Edelbrock performer RPM dual plane 7166 * Distributor: Pro billet RTR (Iron Gear) * Water pump: OE cast iron * Carburetor: Quick Fuel 780 cfm vacuum secondary's electric choke HR-780 * Fuel pump: Holley mechanical 110 gph 12-460-11 * Spark plugs: AutoLite 3923 * Spark plug wires: 8mm Additional engine Info: * Oil: Conventional / Non-Synthetic 10W30 with Comp Cam zinc additive 159 for first 3,000 miles * Oil filter: Wix or K&N per application * Timing: 34-36 degrees * Spark plug gap: .035 in. * Firing order: 15426378 * Octane: 91+ * Stall converter: 2200-2500 * Exhaust: 1 3/4 – 2 in. headers
Not Yet Reviewed
$11,132.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
