Engines, Bare Blocks Engine Blocks & Accessories Engines & Components - front KEYWORD - Free Shipping Savings Central - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

Ford Performance Parts Boss 302 Engine Blocks

The perfect foundation for your Boss engine--Ford Performance Parts Boss 302 engine blocks! They're built stronger than the originals to make your high performance build a success. Designed as replacements for the legendary Boss 302 and Boss 351 blocks, they use the latest technology and manufacturing techniques. Cast from diesel-grade iron with siamesed bores, thick cylinder walls and decks, Boss block strength is far superior to any Ford production block. Boss 302 blocks are available in standard and Big Bore versions that support engine sizes up to 363 c.i.d. Proven around the world, both on the track and on the street; all Ford Performance Boss 302 blocks are cast and machined to the highest industry standards in the USA. Features include: * Big Bore version features 4.125 in. bore capacity, finished at 4.115 in. rough bore * Standard bore version is finished at 3.990 to 3.995 in. rough bore with 4.125 in. bore capacity * 8.2 in. deck height, finished at 8.200 in. plus .010 to .015 in. * Optimized cylinder wall length for stroker applications up to 3.5 in. with no grinding or clearancing (depends on crank/rod manufacturer) * Splayed 4-bolt mains on 2, 3, 4, main caps * 2-bolt main on first and fifth main caps * Main bearing bores finished to low limit * Finished lifter bores * Machined to accept factory roller lifter guides and lifter guide retainer * Fits factory 1979-95 Mustang oil pan with custom oil pickup tube, part number: M-6622-BOSS302 * NASCAR inspired front oil feed on both lifter galleys * Revised cooling system passageways * Increased bulkhead material * Threaded core and galley plugs (straight thread port plugs with O-ring) * Require special length 1/2 in. head bolts M-6065-BOSS or head studs M-6014-BOSS recommended with M-6049-X306/307/Z304DA heads * Designed for M-6049-X306//X307/C3/D3/Z304DA cylinder heads * Not designed for production 302/351W or M-6049-Y302/Y303/X302/X303/X304/X305 cylinder heads * Uses common O.D. cam bearings M-6261-J351/R351 * Unique cam plug M-6026-S351 included * M-6051-S331 or M-6051-CP331 head gasket recommended * Uses stock-type timing cover (M-6059-D351 recommended; includes fuel pump provision) * Retains clutch cross shaft pivot hole * Original-style oil filter location * Original motor mount boss locations * Original bell housing pattern * Approximate weights: Big Bore 163 lbs.; standard bore 175 lbs.

5.0 out of 5 stars ( 3 )

$2,249.99

Fleece Performance Freedom Series LSR Aluminum Engine Blocks

Fleece Performance Freedom Series LSR is a premium aluminum Gen IV LS standard deck race block designed for high performance applications. Cast from a proprietary 356 T-6 aluminum ingot, the Freedom Series LSR engine blocks are engineered with precision and designed for durability to deliver unmatched strength and compatibility with OEM LS accessories. Reinforced from top to bottom, the blocks are built for maximum performance with added features, like cross bracing in the lifter valley, maximized crankshaft saddle radius, and a 40 percent larger footprint for the main cap contact surface to the skirt wall. Whether you're upgrading for competitive racing or seeking peak performance, the Fleece Performance Freedom Series of engine blocks ensure reliability and excellence in every detail, making them a perfect choice for serious enthusiasts and professionals alike. Features: * Cross-braced lifter valley: -- Provides added structural integrity and individual drain backs for improved reliability * Heavy-duty deck thickness: -- A robust 0.750 in. deck thickness for enhanced durability * Enhanced design: -- Additional stock to the front and rear valley walls for increased strength -- A minimum 0.625 in. skirt wall thickness -- Complete reinforced exoskeleton combined with Hot Isostatic Pressing (HIP) ensures the highest quality casting available * Billet main caps: -- Billet construction ensures stability and precision fitment -- Utilizes 8740 alloy M10 main studs and side bolts along with dowels on the inner studs of the block for superior clamping and reliability -- Exclusive domed main cap design provides maximum crankshaft support * Maximized crankshaft saddle radius: -- Optimized for performance under high-stress conditions * Lightweight: -- Weighs only 120 lbs. with main caps -- Strong yet lightweight solution * Priority oil system: -- Oil rifling provides priority oil feed to critical bottom-end components -- Reduces heat, wear, and risk of failure * Ductile iron sleeves: -- Durable wear-resistant surface with improved shock absorption Engine block is shipped with: * Durabond GMP-9 cam bearings * LSR rear cover, rear cover gasket, and hardware * Plug kit * Precision ground 1018/1020 steel cam thrust plate * Transmission dowel pins * Oil galley barbell plug * Rear main seal

Not Yet Reviewed

$6,750.00

Edelbrock LS Bare Race Blocks

Edelbrock LS bare race blocks are designed to meet the needs of today's high performance engine builders and racing enthusiasts. They are available in standard and tall deck height combinations and are engineered for maximum clearance around a 4.600 in. stroke crankshaft. With their unique design, Edelbrock engineers were able to minimize windage in the rotating assembly, leading to superior engine lubrication at higher rpm. To make them friendly for existing race applications, these blocks contain both factory and motor plate race mounts for Gen I, II, III, and IV engines. Each LS bare race block receives a CT scan to ensure maximum performance and consistency. Standard features include: * Designed from aircraft-quality A357 T-6 aluminum * Siamese cast bore walls (4.125 in. or 4.165 in. diameter) with press-in cast iron sleeves * Machined with 55mm cam bearing journal * Available in standard (9.240 in.) and tall (9.750 in.) deck heights with beefy deck thicknesses (.500 in. standard/.750 in. tall deck); standard (5.87 in.) and tall (6.38 in.) deck cylinder sleeves are available * 6-head bolt design with full water jacket around cylinder walls; large windows in the valley allow access to an inboard 6th head bolt * Block design includes large front and rear -12AN side feeds for serious dry sump setups * Material for oversized lifters with lifter bosses are designed to clear tie bar-style lifters

Not Yet Reviewed

$6,904.95

Chevrolet Performance LSX Bowtie Engine Blocks

Chevrolet Performance LSX Bowtie engine blocks are designed for the advanced competition engine builder. They feature Siamese cylinder bores and a semi-finished deck height. The blocks can accept a maximum stroke of 4.250 in., a maximum bore of 4.250 in., and can support displacements of 454 cu. in. or more. LSX Bowties feature cast iron construction with an orange powdercoat finish. They accept all Gen III and IV LS-style cylinder heads, crankshafts, camshafts, and other components. Order the model with deck height and other options needed for your application. Additional features and specs include: * Front oil feed lines that can be plugged or restricted for mechanical flat tappet or mechanical lifter applications * Can be safely machined to 9.200 in. deck height * 1054 billet steel 6-bolt main bearing caps * 6-bolt cylinder head bolt pattern * Cam bores that can be machined to accept 60mm roller bearings * Can be machined for larger diameter lifters * External oil pump feed at the rear * Added 7th transmission bolt hole to work with early-style GM transmissions * Can accept a front motor plate for racing use * Threaded freeze plugs that can be used for external heaters or coolers * Windowed main bulkhead

5.0 out of 5 stars ( 1 )

$5,565.20

World Products Merlin IV Engine Blocks

World Products has made improvements to virtually every area of the new Merlin IV engine blocks—with the goal of producing the most technologically advanced and best-performing iron BBC block available today! New features include thicker main webs for increased strength and thicker cylinder walls which are nominally .310 in. @ 4.600 in. bore. In addition to the standard BBC 9.800 in. and 10.200 in. deck heights, new heights measuring 9.500 in., 9.850 in. and 10.250 in. are now available. The World Products Merlin IV engine blocks are also available with a 2.120 in. BBC cam journal and standard .842 in. lifter bores, or with a 2.283 in. journal for a 55mm Babbitt cam and .904 in. lifter bores. World Products has added a front oil feed for dry sump systems, and relocated the lifter oil feeds and restrictor provisions to the front of the blocks.

5.0 out of 5 stars ( 3 )

$3,842.02

—

$5,173.48

Dart Race Series Big Block Chevy Aluminum Bare Blocks

What makes the Dart Race Series big block Chevy aluminum bare blocks the top choice for serious competition engines? They're based on the Chevrolet big block V8 design, but with added features and Dart's implemented advanced engineering! Key features of these Dart Race Series blocks include: * Cast from virgin 355-T61 aerospace alloy for strength * Ductile iron sleeves with extra thick cylinder walls promote excellent ring seal * Reinforcing ribs strengthen the lifter valley bellhousing flange * Inboard valley head stud bosses improve gasket sealing * Priority main oiling system delivers oil directly to the crankshaft bearings to enhance reliability at high engine speeds * Standard BBC cam journals, up to 60mm with raised cam options available * Standard .842 in. BBC lifter bores, other options available * Available with or without distributor provision * Steel 4-bolt main caps with splayed outer bolts for extra strength (light-weight aluminum caps also available) * Mechanical fuel pump boss, clutch linkage mounts, and side and front motor mounts simplify installation in chassis * Dual oil pan bolt patterns fit standard and notched oil pans

Not Yet Reviewed

$6,999.99

World Products Motown Race Engine Blocks

World's Motown blocks are without a doubt the most feature-laden, engine builder friendly, cast iron blocks on the market. And because of their superior temperature control and rock-solid stability, experts claim they're worth up to 20 hp more than other blocks on the market! At first glance, one of the more noticeable differences between the World Motown and OEM Chevy blocks are the 'bulges' at each cylinder. That's because the Motowns have thicker cylinder walls, and the water jackets have been expanded to provide required cooling. Order the model and options preferred for your application. Important features are as follows: * Made from high-density cast iron * 9.025 in. deck height with .600 in. minimum thickness * Dry sump valley scavenge lines drilled * Clearanced for 4.000 in. stroker crankshafts (H-beam steel rods) * Integral mounts for spin-oil filter * Dry sump systems can feed from front or rear of block * Available with 4-bolt nodular or splayed billet caps * Can be bored to 4.200 inch maximum * Water jackets expanded for better cooling * Standard Chevy cam location and cam bearings * OEM starter, fuel pump, and engine mounts (dual) * Blind tapped head bolt holes for extra integrity * 100 percent compatible with OEM parts * Indexed lifter bores (can use standard-height lifters) * Main caps are located by dowels (not OEM outside register) * Weight: Approximately 190 lbs.

4.0 out of 5 stars ( 1 )

$4,549.46

Summit Racing™ SPC Engine Blocks

Summit Racing™ SPC Engine Blocks are aftermarket V8 Engine Blocks made for "Street, Performance, or Competition." These new clean sheet designed aftermarket blocks are cast in a modern state-of-the-art German foundry on brand new molds and machined in USA on modern high-speed machining centers that can hold the tightest of tolerances. Why start your engine build with a dirty, old, worn-out production block that needs hundreds or thousands of dollars of machine work--when you can start with a new heavy-duty casting full of high-performance features. We ship these blocks mostly finished but leave the cylinder bore .005" undersize, your machine shop will have to hone them for proper size. You can rest assured that you have a great foundation for your engine build. Check out the features below! Additional details: • Available Versions Include: GM Small Block, GM LS, GM Big Block (coming Soon,) Ford Windsor 5.0 and 351W • Cast in Germany at a Tier 1 OEM foundry • Made with class 35 Iron Alloy, Higher tensile strength and harder than competitors' class 30 • Machine-finished in USA on precision hi-speed machining centers- All dimensions are very accurate! • Priority main oiling systems & Siamese Cylinder bores • Blind head bolt holes • 4-bolt main caps, 180,00 PSI main bolts included

5.0 out of 5 stars ( 12 )

$2,549.99

—

$2,999.99

8 Results Found For "front"