Availability
Showing In Stock Items. Show All 15 Items.
Ford Performance Parts 2018 2.3L 310 hp EcoBoost long block crate engines are designed for traditional rear drive installations. They're the same EcoBoost engine found in the 2018 Mustang and feature turbocharging, direct injection, and twin independent variable cam timing (Ti-VCT). The swap possibilities are almost endless: from early street rods, kit cars, most generations of Mustang, to just about any other vehicle build. Ford Performance Parts 2.3L 310 hp Mustang EcoBoost engine kit—this kind of performance comes standard with a dose of adrenaline! Features and items: * 310 hp and 350 lbs.-ft. torque at 3,000 rpm (with 93 octane fuel) * Production turbocharger * Starter and mounting hardware * Alternator and mounting hardware * Flywheel * Engine harness (not installed, must be used with Ford Performance control pack) * Throttle body (not installed, must be used with Ford Performance control pack) * Engine kit uses Ford Performance Parts M-6017-23T control pack (not included) for easy plug-and-play installation
( 1 )
$5,242.99
BluePrint Engines GM 383 c.i.d. 445 hp dressed power-adder stroker long block crate engines make strong foundations for nitrous, turbos, and blowers. Block features: * Cast iron * 4-bolt main * One-piece rear main seal * Passenger side dipstick * Mechanical fuel pump provision * Drilled and tapped for clutch linkage Rotating assembly: * Forged crankshaft * Forged I-beam connecting rods * Forged pistons Also includes: * Aluminum cylinder heads -- 64cc chamber -- 2.02 in. intake/1.60 in. exhaust valves -- 195cc intake/75cc exhaust runners * Hydraulic roller cam -- .536 intake/.555 exhaust -- 224 intake/236 exhaust duration at .050 -- 113 degree lobe separation * Oil pan * Valve covers * Timing cover * Harmonic balancer * 30-month/50,000-mile Warranty * Dyno-tested and shipped with results
( 1 )
$8,049.00
BluePrint Motorsports 632 c.i.d. Eliminator Power Adder Stroker engines are designed and built to be power adder-ready, whether you're looking at a turbo, supercharger, or nitrous oxide. The old adage of "there's no replacement for displacement" is becoming … dare we say, old? These days naturally aspirated engines just aren't enough for some drivers, and this long block is your solution! Details and specs: * 700 hp, 650 lbs.-ft. naturally aspirated * Compression ratio: 9.6:1 * Aluminum heads * Hydraulic roller cam BLOCK: * NEW BluePrint cast iron block * Manufactured and machined in the USA * 4-bolt main * 4.600 in. bore * One-piece rear main aeal * Tall deck (cylinder deck is appx. .400 taller / wider than OEM block) ROTATING ASSEMBLY: * New BluePrint forged crankshaft * 4.750 in. stroke * Forged H-beam 6.635 in. connecting rods * ARP 2000 Series bolts * Mahle Motorsports forged pistons * Precision gap, power adder piston rings * Internally balanced CYLINDER HEADS: * BluePrint aluminum cylinder heads (PS8012) * 119cc chamber * 2.30 in. intake / 1.88 in. exhaust valves * 358cc intake / 125cc exhaust runners * Cylinder heads feature a .300 in. raised exhaust port vs. an OEM casting * MLS head gaskets CAM SPECS: * Cam type: Roller * .698 / .698 lift * 272 / 282 duration @ .050 - 110 degree LSA ALSO INCLUDES: * Valve covers, oil pan, and timing cover * Dyno test results shipped with engine * SFI-rated dual keyway 8 in. balancer
Not Yet Reviewed
$16,449.00
Built for high performance applications, the Ford Performance 5.0L Coyote Gen 4 Aluminator SC crate engines are a powerhouse—ideal for custom race builds and 2024 GT Mustangs. While the Aluminator block, cylinder heads, oil pan, and intake manifold are factory pieces, Ford Performance replaces the hypereutectic pistons and sintered-steel rods with Mahle forged slugs, ARP 2000 rod bolts, and Manley forged H-beam rods, keeping the factory 12.0:1 compression ratio in naturally aspirated form and 9.5:1 on its boost-ready Aluminator crate. These flagship crates are quite popular with Ford diehards in the custom car and street rod world—because who really wants to put a Chevy LS in a deuce coupe? Crate engine features and specs: * Fits 2024+ Mustang GT * 5.0L (302 cubic inches) * 9.5:1 compression ratio (nominal) * Mahle hard anodized forged pistons with Grafal low friction coating * Manley H-beam connecting rods with ARP 2000 bolts * Forged steel crankshaft * Uses production 2024 Mustang GT aluminum block * 2024+ Production oil pan * Tuned composite Mustang GT intake manifold with production dual drive-by-wire 80mm throttle bodies with variable runner control * Four-valve-per-cylinder aluminum heads with roller-finger followers reduce friction. * Mustang GT production camshafts * Includes Ford Performance colder, heat range zero spark plugs (M-12405-M50A) * Includes Ford Performance oil filter (M-6731-FL820) * Includes billet steel gerotor oil pump gears (M-6600-M50A) * Vehicle harness and PCM not included * Does not include alternator (for alternator kit: refer to part numbers M-8600-M50BALT or M-8600-M50ALTA) * Engine mount bosses and bell housing mount pattern common to 4.6L modular engines * Does not include exhaust manifolds
Not Yet Reviewed
$15,262.99
Clearance
VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.
( 72 )
$5,211.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
