Availability
Showing In Stock Items. Show All 25 Items.
Be Cool Scirocco-style drag race radiator modules are build for Sportsman and Bracket racings using a super lightweight radiator that features a one-inch core. These featherweight models are available either cradle or flange mounted, with or without a filler neck. Additional details: * Has -20 AN fittings on inlet and outlet * Super lightweight * Crossflow design with one-inch core * Aluminum construction with natural finish * Radiator dimensions: 22 in. wide x 15 in. high * Core dimensions: 18 in. wide x 12 in. high * Core type: Dual one-inch * Includes Single 11 In. puller fan, fan brackets, wiring harness
Not Yet Reviewed
$799.99
"The cooling is in the copper." Johnson's Radiator Works engine swap radiators feature a 4-row, 2 3/4 in. thick, high-flow copper core, ideal for the best cooling efficiency possible. They are made with heavy-gauge steel side brackets and mounting holes pre-stamped where needed. Antique, vintage, or classic, Johnson's has a radiator guaranteed to cool your vehicle and engine setup. Additional features: * Copper core with one-piece brass tanks * Brass tubes made in-house--125 in. x 0.5 in. * Top tanks stamped from .040 deep draw brass * Quality control start to finish from raw material to finished product * Made with original tooling, equipment, and techniques from Walker * Designed to operate with a 15 to 18 lb. radiator cap (except Flathead application 7 lb. cap recommended) * Brass drain cock
( 2 )
$1,260.00
—
$1,655.00
Few things get your attention as quickly as seeing white smoke billowing out from under the hood—and once stopped, precious anti-freeze all over the ground. OSC Automotive radiators are designed to fit into place as easily as the stock model came out; OEM models are used as a baseline, so their radiators meet or exceed the originals. To ensure great products, OSC starts with the highest grade of raw components, then follows factory construction standards to maintain longevity of the engine and transmission. Transmission and oil coolers are tested before installation on needed units, and radiator cores are qualified before and after assembly using state-of-the-art cycle, vibration, burst, and environment testing. OSC prides itself on solving OE design failures in order to provide radiators with better life expectancies than the originals. Over a thousand models are available for fitment on specific makes and models. Choose the style designed for your engine type and vehicle application.
( 289 )
$287.99
Cold-Case performance aluminum radiators are available and affordable for all. These high-quality, tube-and-fin performance radiators are true OE styles for most applications. Each Cold-Case design distributes fluid more evenly, eliminating hot and cold spots. Also, the massive cores take up the entire width of their tanks, so you get the most efficient cooling possible. The radiators drop-in without modifications needed (on most) and look original. Plus, Cold-Case stands behind its quality and research with a limited lifetime warranty on their products. All Cold-Case radiators feature: * Lightweight, efficient aluminum construction * 100 percent TIG-welded * Internally welded filler necks offer a clean, factory look * Two oversized cooling rows for increased capacity * 1 in. to 1 1/4 in. tubes for higher volume * Works with factory filler cap * Includes OEM-style petcock * 42.7 percent lighter than comparable copper radiators * 30 percent thicker materials than no-name aluminum radiators * 60-day COOL guarantee
( 630 )
$422.54
—
$899.54
Cool just got better! Cold-Case performance aluminum radiator modules bundle performance components for the most efficient cooling available. They've packaged their high-quality radiators with their exact fit shrouds and electric fans to deliver the best fit with an original look, an easy install, and effective cooling at an affordable price. Order the universal or application-specific model best suited for fitment in your engine bay. All Cold-Case radiator modules feature: * OEM-stamped, fully polished tanks * Aluminum shroud * Electric fan(s) * Correct OEM fitment * Lightweight, efficient aluminum construction * 100 percent TIG-welded * Internally welded filler necks offer a clean, factory look * Two oversized cooling rows for increased capacity * 1 in. to 1 1/4 in. tubes for higher volume * Works with factory filler cap * Includes OEM-style petcock * 42.7 percent lighter than comparable copper radiators * 30 percent thicker materials than no-name aluminum radiators * 60-day COOL guarantee
( 189 )
$588.54
—
$850.54
On Sale
Protect your ride from overheating! Now you can maximize cooling efficiency with Frostbite's performance cooling aluminum radiators. They're engineered to cool more effectively and weigh less than the older OEM-style brass units, enhancing the overall performance of your engine. Frostbite radiators are available in a variety of application-specific fitments, each unit engineered with aircraft-quality aluminum cores, fittings, tanks with billet aluminum filler necks, and OEM-style brass petcocks. A proper cooling system starts with the right radiator—the Frostbite!
( 314 )
$417.95
—
$749.95
Be Cool factory fit modules provide drop-in convenience, plus the capability of keeping engines up to 1,000 hp (depending on your application) running at the proper temperature! These modules feature Be Cool's factory fit radiator that has two rows of 1 in. tubes to reduce coolant temperatures, a billet filler neck, a drain petcock, and .080 in. wall hand-fabricated aluminum tanks. You can choose either a natural finish or kick it up a notch with the polished finish and dress your engine compartment with shiny performance. Be Cool offers hundreds of models and options for fitment on a wide range of vehicles. Most module kits include a new aluminum radiator, electric fan(s) with mounting brackets, a Be Cool radiator cap, an overflow catch can, and a fan wiring kit.
( 88 )
$1,199.99
—
$3,999.99
Swap in and cool down your LS engine with Be Cool Bone Yard LS swap radiators. They feature all aluminum construction with two rows of 1 in. diameter tubes, .080 in. wall aluminum tanks, billet filler neck and drain petcock. The radiators are designed for the innovative builder who's budget minded. These radiators are available in crossflow and downflow styles and different sizes to fit with your LS engine swap.
( 51 )
$298.99
AFCO Racing LS swap direct-fit radiators are built with the correct inlet and outlet required for the engine swap. They are 100 percent TIG-welded, 100 percent pressure tested and use no epoxy or sealers. These double pass radiators were designed for the rigors of racing, but AFCO added the mounts to allow their superior design on the street. After all, there are more important things to be doing than installing your radiator—like enjoying your truck the way it was intentionally built for—to be driven! AFCO Racing LS swap direct-fit radiators feature: * All aluminum construction * Billet filler neck offers strength and higher quality appearance over stamped * Uses the same tools to install your new radiator as you did to remove the old one * Factory fan shroud provisions on many models * Available with optional fan and shroud assemblies * TIG-welded by skilled craftsmen * Properly positioned inlets and outlets for ease of flow * Drain plugs included
( 3 )
$1,798.99
AFCO Racing offers a comprehensive line of bolt-in direct fit aluminum radiators in crossflow and downflow styles. All AFCO radiators offer a furnace brazed sealed core without the use of epoxy and are all tested before shipping. Order the fitment specific to your vehicle application. Bolt-in direct-fit radiator features include: * Aluminum construction * 100 percent TIG-welded * Pressure-tested * Pre-drilled mounting holes * Filler neck and drain petcock * Two rows of 1 in. tubes for the maximum cooling available for your vehicle
( 13 )
$1,305.99
Combustion! Even the word sounds hot. Controlling that internal heat is an important step toward longer engine life and top performance. Keyser Manufacturing single pass radiators are "heat exchangers" featuring 100 percent aluminum core construction and a billet machined filler neck. The units are TIG-welded for durability, with fin covers enclosing the top and bottom for a clean look, as well as protection and an easy installation. Radiator interiors include a 3 in. thick furnace-brazed core and two rows of 1 in. cooling tubes. (Performance model tubes are 25 percent wider.) Many of the Keyser Manufacturing radiators also have a transmission oil cooler, an important asset when you consider that over 14 million transmissions fail each year--most from overheating. The crossflow-style radiators are produced in a variety of dimensions to fit dozens of vehicle types; inlet and outlet sizes and locations also vary. Specifications: * Screw-in universal inlet (accept 1 1/2 in. hose, -16 or -20 AN fittings, sold separately) * 1 3/4 in. outlet * 3/4 in. female pipe oil cooler fittings sold separately * No epoxy is used in the radiator cores
( 1 )
$439.99
PWR North America heat exchanger radiators incorporate a built-in 10-plate engine oil cooler system containing the same high-efficient oil to water engine oil cooler that is available in PWR's NASCAR line of radiators. The standard double-pass radiator comes with a universal inlet and 1.750 in. outlets. These radiators are available in an open or closed system, with or without a filler neck, and come with AN fittings for the oil to water engine oil cooler. Put your trust in PWR North America for all of your cooling needs! Select the heat exchanger radiator designed for your application needs.
Not Yet Reviewed
$933.00
Are you tired of fighting cooling problems? Get Be Cool factory fit aluminum radiators to fix the issue. They feature a crossflow design, two 1 in. diameter cooling row tubes, all-aluminum construction, and a billet filler neck. These radiators are perfect bolt-in replacements for your stock radiator. No modifications are required for installation, so there's no cutting, fitting, or welding required. Available for manual or automatic transmissions, Be Cool factory fit aluminum radiators will provide the extra cooling capacity that you've been looking for.
( 24 )
$599.99
—
$849.99
Be Cool Circle Track Hard Core racing radiators deliver best-in-class performance and value. They feature an extra durable, dual 1 in. core for maximum cooling and extended durability; with wide spread coverage for all popular racing chassis applications. The racing tanks are made of .080 in. wall, circle track-style aluminum with non-epoxy construction for high-heat rejection and extended life, plus "twist resist" upper and lower protective aluminum core rails for added rigidity. Each Hard Core radiator includes a billet filler neck with a high-capacity overflow tube, and single or dual-pass construction. Like all Be Cool radiators, they are 100 percent pressure-tested and shipped in expanding foam packaging.
( 2 )
$249.99
Of all the components in the cooling system, the performance of the radiator is the most critical. AFCO Racing understands the vital role the radiator plays in protecting the investment you have in your car. That's why they make no excuses or compromises in constructing the best aftermarket radiators in the industry. AFCO universal triple-pass crossflow radiators allow your car to remain at constant temperature, which means that power delivery is more consistent. They're designed to promote optimal airflow and cooling by utilizing appropriate fin count, tube size, core thickness, and fin serration for each particular application. Additional details: * 100 percent aluminum construction (no epoxy) * 100 percent TIG-welded and pressure-tested * Cast filler necks feature screw-in bleed; won't crack or leak with age * Laser-cut mounts for quarter-turn fasteners * Can be mounted straight or angled * Four 10 AN O-ring female fittings, driver side
Not Yet Reviewed
$899.99
Be Cool Aluminator Series radiators are a perfect choice for high performance cooling that won't break your budget. Offering their best value, these exact fit models feature performance-grade, dual 1 in. cores in natural-finish aluminum, and are manufactured with OEM-sized inlets and outlets in the correct OEM locations. They come with billet filler necks, brass petcocks, and all the necessary mounting brackets. Be Cool Aluminator radiators are offered for a variety of applications to serve your cooling needs!
( 67 )
$599.99
From the first lap to the last, these Be Cool Crew Chief Series Circle Track radiators will give you the performance needed to get the job done. They are manufactured from 100 percent .080 in. wall aluminum, fabricated tanks, a dual 1 in. crossflow core, and a billet filler neck. The radiators are available in your choice of dual-pass or triple-pass models. Passing the coolant through the core twice and/or three times while air passes across the core will help maintain coolant temperatures under severe racing conditions. With GM, Ford, and Mopar applications available, these Be Cool Crew Chief Series Circle Track radiators can help you perform at the front of the pack and be cool!
( 1 )
$299.99
REACH Cooling offers more than 1,000 radiator models, covering roughly 95 percent of popular automotive and light truck applications. All of their replacement parts are designed to meet or exceed original equipment specifications, ensuring that they will fit and perform just like stock. REACH aluminum radiators are available in crossflow or downflow styles; with numerous inlet/outlet size and location options. Many models also include a transmission cooler. Order the radiator recommended for your vehicle.
( 81 )
$256.99
Griffin exact fit radiators feature an OEM-style stamped tank and are made of high-quality lightweight aluminum. They provide seamless installation with no modifications required—and will deliver optimum cooling performance for your auto, truck, musclecar, or hot rod. The radiators are available in downflow and crossflow styles, with many size options for specific vehicles.
( 177 )
$996.00
—
$1,319.00
Walker Radiator Works specializes in high performance copper/brass radiators and is recognized as the world leader in cooling system packages for street rods and custom cars. Cobra Standard Cool-Mate Series radiators are complete cooling packages for your street rod. They include a Cobra radiator with a built-in automatic transmission oil cooler, plus an attached air-conditioning condenser—and are ideal for use with mild small block engines with stock or low compression ratios. Cool-Mate Series radiators are built for an exact fit and work with original, reproduction, steel, or fiberglass grille shells for a bolt-in installation. Features include: * Designed to operate with 15 to 18 lb. caps * Top tanks are stamped from .040 in. deep-draw brass * Pre-drawn heavy (12-gauge) steel rod holder with threaded holes for all attachments * Brass draincock for easy draining * Oil cooler for automatic transmission (1/8 in. NPT) * Heavy-gauge steel side brackets * No alterations to grille or grille shell * Condenser-compatible for use with Freon R-12 and R-134a refrigerants * Easy condenser-to-compressor-evaporator hookups * Condenser fitting sizes are -6 AN and -8 AN O-ring * Condenser is securely mounted for long-lasting durability * Guaranteed to cool
Not Yet Reviewed
$873.99
Griffin Exact Fit radiator combos are the perfect pairing to take the "scary" out of electric fans! Exact Fit combos deliver Griffin's high-quality aluminum OEM fit and style radiators. They're constructed with MaxCool or ExtremeCool tubing, hand-formed aluminum shrouds, and performance electric fans. These units are easy to install, provide the best factory appearance, and fit your ride with out-of-the-box affordable performance cooling. Want to switch to electric fans? American-made Griffin Exact Fit radiator combos provide you with the perfect solution without any guesswork. Order the package designed for your specific vehicle.
( 90 )
$1,663.00
Be Cool Featherweight drag race radiator module assemblies are built for Sportsman and Bracket racers using a super lightweight radiator that features a 1 in. core. Constructed from aluminum, these crossflow-designed drag racing modules include puller fan, fan brackets, and wiring harness. They are available either cradle or flange mounted. Lose the weight and win with Be Cool Featherweight race modules!
Not Yet Reviewed
$799.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
