Availability
Showing In Stock Items. Show All 71 Items.
UMI Performance transmission mounted torque arms eliminate unwanted traction problems and transfer your power to the wheels. UMI Performance transmission mounted torque arms bolt on directly in place of the factory unit using existing mounting holes and require no drilling or welding. These torque arms are designed to eliminate wheel hop under hard acceleration and reduce 60 ft. times instantly. UMI Performance transmission mounted torque arms are supplied with a low-deflection front bushing designed to replace the stock rubber bushing and bolt in the existing clamshell. The rear torque arm mount is constructed entirely of 0.375 in. thick, CNC-machined mild steel and is fully MIG-welded. These torque arms feature on-car adjustability for easy pinion angle adjustments using a 4140 heat-treated adjuster and 3/4 in. rod ends. Additional features include: * Constructed from 1.250 in. x 0.120 in. DOM seamless steel tubing * TIG-welded 4140 chromoly tube adapters * On-car adjuster built using 4140 chromoly steel and heat-treated for maximum strength * All mounting plates are CNC-machined to ensure hole-to-hole accuracy * Rear mounting plates use 0.375 in. thick mild steel and are designed to fit stock as well as 12-bolt and 9 in. rear-end housings * Rear mounts feature solid 3/4 in. rod ends and are attached using Grade 8 hardware * Durable powdercoated finish
( 19 )
$329.99
Replace your heavy stock K-member with one of these tubular QA1 Mustang K-members and, in addition to the weight savings, you'll get better steering geometry, less bump steer, reduced dive under braking, and quicker straight-line performance. Ideal for street performance, autocross, pro touring or drag racing, they easily bolt onto factory components without any wheel or tire fitment changes. Features and benefits include: * All mounting points are digitally-indexed from new factory K-members * Made from high-quality, American-made, high-strength, low-alloy steel (HSLA) steel * Weighs only 25 lbs.--over 50 percent lighter than stock K-members * Increased header and oil pan clearance for easier maintenance and installation * Modular design for versatility--bolt-in engine mounts can easily be swapped for future engine changes * Improved geometry--maintains optimum anti-dive and minimizes bump steer with selectable rack height and optimal control arm positioning * Ideal for Mustangs with a lowered stance * Retain the factory wheel base Note: For best results, QA1 control arms are strongly recommended
( 31 )
$479.95
—
$593.95
QA1 HD Pro rear drag 4-link kits are built to put down serious power! Streamlining the fabrication process, these systems deliver professional-grade results and performance in a convenient, easy-to-order kit. They are designed for the hardcore, discerning, do-it-yourself racer looking for a no-compromise solution to take their vehicle to the next level in performance and adjustability. Offered with or without QA1's MOD Series 4-way adjustable coilover shocks, or 7 in. travel, track-proven single or double adjustable coilover shocks, each kit contains high-quality, MIG-weldable components to ensure a safe and properly engineered design that can be easily adapted into many drag racing setups. A components kit is also offered without coilover shocks and lateral locating device. Find convenience, safety, and performance all in a QA1 HD Pro rear drag 4-link system. Select the kit best suited to your drag race suspension setup. Features, benefits, and contents: * Drag race-style 4-link design: -- Performance and adjustability -- Wide range of instant center tuning and on-car adjustability -- Components can be cut to length -- 40 in. or narrower frame rails * 1/4 in. thick plates * 1 1/4 in. diameter, 22 in. length trailing arm tubes * Grade 8 hardware * QA1 chromoly rod ends * 40 in. shock crossmember and mounting tabs * 40 in. diagonal link kit with mounting brackets (not in components kit)
Not Yet Reviewed
$696.95
—
$2,426.36
The rear control arm crossmember on Toyota 4Runners and FJ Cruisers are prone to cracking over time in the center where it supports the fuel tank. Not an ideal situation for such an important structural piece of the frame, considering it also houses the upper control arm brackets, along with the evaporator canister support bracket. When this breaks, it leaves your vehicle undrivable. Thankfully, Rust Buster Frameworks has the solution. Rust Buster rear control arm crossmembers are designed and built to be exact OEM replacements with all the brackets and components to fit perfectly right out of the box. No more having to source your own tube and fabricate all the intricate brackets. Get your Toyota back on the trail where it belongs, not on jack stands in your garage, with help from Rust Buster rear control arm crossmembers. Select the crossmember designed for your model. Features and benefits: * Built to OE specifications * Made from heavy-duty 11-gauge steel * Includes: -- Rear upper control arm brackets -- Evaporator canister bracket -- Fuel tank center support bracket -- Exhaust hanger(s) -- Grade 8.8 hardware -- Tube weld rings OR side boxing plates (depending on kit)
Not Yet Reviewed
$299.99
Most stock chassis flex dramatically, even with mild amounts of torque and horsepower. BMR suspension strut tower braces reduce chassis flex and increase handling and performance. They are manufactured from a mix of large diameter DOM steel tubing and thick laser-cut steel plate. Depending on the application, they are available in two-point and four-point designs that solidly link the front strut towers, adding strength to the entire front unibody and suspension. Most are available in black hammertone and red powdercoat finishes for long-lasting good looks. BMR strut tower braces are 100 percent bolt-in. This means they can be easily installed with simple hand tools, and no welding is required. Installation time is typically less than an hour. When performance is a must, rely on BMR Suspension!
( 168 )
$209.95
—
$429.95
BMR subframe connectors are some of the strongest in the industry. Their innovative design ties together key structural points across the floorpan, minimizing flex. BMR subframe connectors are fabricated from heavy-duty, rectangular tubing for frame rigidity and improved handling ability.
( 65 )
$379.95
—
$669.95
Already have a QA1 coil-over conversion system on your C10? QA1 C10 crossmember retrofit kits add powered rack and pinion steering, offers 2 in. of additional drop range (up to 8 in. total), and saves an additional 70 lbs. of weight. These bolt-in upgrades improved drivability and steering feel while achieving the perfect stance. Choose the kit for your model year. Features and benefits: * Powered rack and pinion steering -- Provides quicker and tighter steering, plus increased steering angle when fitting larger wheels and tires and improve geometry for enhanced drivability. * Improved ground clearance -- The tubular design makes your under cab rails the truck's lowest point. Updated lower shock mounts add clearance and new upper shock mounts increase travel for a great ride and performance, even at lower ride heights * Compatible with existing QA1 coilover systems -- Easily swap out a few components on your existing QA1 shocks and control arms, allowing you to upgrade your truck in stages, starting with coilovers and control arms * Easy, bolt-in installation -- The crossmember comes powder coated and ready to install, no cutting or welding your frame. It easily locates the steering rack, and you can choose mounts (sold separately) for common engines.
( 1 )
$2,450.95
UMI Performance tubular K-members instantly remove 25 lbs. from the front of your vehicle, while maintaining strength for streetability and daily use. UMI Performance tubular K-members have been designed to handle everything from drag racing to daily driving and even autocross. Their dual tube center section adds increased strength over the competitors' designs, making them far superior and able to handle everyday stress and abuse. Additional front-end adjustment can also be achieved with these K-members. The lower A-arm slots feature a 1/2 in. adjustment built in and will work with the stock and any aftermarket A-arm setup. The front and rear A-arm slots also feature additional bracing to withstand hard side loads and extreme pressure. These tubular K-members also feature integrated motor mounts, eliminating the stock cast iron mounts for maximum weight savings. Additional features include: * Main center tube constructed from 1.500 in. x 0.120 in. seamless steel tubing * Additional cross braces use 1.250 in. x 0.120 in. seamless steel tubing * TIG and MIG-welded construction for superior strength * Front and rear A-arm mounts CNC-machined and fabricated from 0.188 in. thick steel * Rear A-arm mounts gusseted to withstand extreme side loads and pressure * Dual tube center section adds increased strength over any competitor's design * All mounting plates are CNC-machined to ensure hole-to-hole accuracy * Factory locator pins included for easy installation and exact fit * Completely fixture-welded to ensure factory fitment with no grinding or cutting
( 17 )
$699.99
—
$1,566.96
Classic Performance 1962-67 Chevrolet Nova front subframe kits are one of the most beneficial upgrades available for your first generation Nova. By eliminating the factory strut rods and adding adjustable forward control arms, they add stability, align-ability, improved steering response, and over 2 in. of additional ground clearance. They can accommodate both factory and aftermarket sway bars with up to 1 in. diameters and feature a unique 1-piece crossmember that ties both frame rails together by bolting in where the factory strut rod mounts were located. No cutting or welding required, the installation is all bolt-in. Kits include: * 2 one-piece, 1 1/4 in., 0.120 wall DOM tubular lower control arms with Classic Performance premium ball joints * Bolt-in, 1/4 in. thick steel crossmember * Four alignment cam kits * Grade 8 mounting hardware * Low-friction, long-life bushings * Optional upper control arm bushings
( 15 )
$838.99
On Sale
Hooker LS engine swap transmission crossmembers are built to mount the transmission in place when switching to an LS engine. They are designed using CAD modeling/FEA analysis for optimal fitment, strength, weight, safety, and appearance. The crossmembers are manufactured from high-strength, low-alloy steel and then black powdercoated for maximum durability. They provide an engineered 3 to 3.5 degree engine/transmission inclination angle that is critical to obtaining suitable U-joint working angles. They are designed to be used in conjunction with Hooker LS engine swap brackets to provide a bolt-in installation of Hooker LS swap manifolds, headers, and exhaust systems for this application.
( 42 )
$359.95
—
$375.95
$323.95
—
$338.35
QA1 Mopar K-members are direct bolt-ins for Chrysler, Dodge, and Plymouth vehicles. They are manufactured from quality materials and are engineered for maximizing strength. The K-members feature motor mount attachment points to accept factory and aftermarket motor mounts, and their tubular design also allows for increased header clearance.
( 28 )
$861.95
On Sale
Hooker Blackheart transmission crossmembers provide easy installation for a variety of engine and transmission swap combinations. Manufactured from steel with a black powdercoat, these crossmembers are designed to be used with Blackheart engine adapter plates for a trouble-free LS, LT, Hemi, Coyote, etc. engine swap. Order the model recommended for your vehicle. Blackheart crossmember features: * Comprehensively designed as an integral part of the complete Hooker swap system, providing maximum level of inter-component compatibility * Designed specifically for use with Hooker engine adapter plates * High-arch exhaust passages provide maximum available exhaust ground clearance * Design geometry replicates stock drivetrain height, inclination angle, and offset for optimized vehicle and component compatibility * High-strength/low alloy steel construction provides desirable balance of strength, stiffness, weight, and cost * Powdercoat finish provides attractive, corrosion-resistant appearance * Provide bolt-in compatibility with Hooker/Holley engine mounts, swap headers, exhaust systems, and oil pans * Hardware included
( 27 )
$449.95
$403.95
UMI Performance bolt-on 3-point subframe connectors increase chassis stiffness, performance capabilities, and overall drivability. Their setup is designed to tie the front and rear subframes together, adding additional cross-bracing throughout the center of the vehicle and protecting it to its fullest, while keeping ground clearance issues to a minimum. This spider web effect greatly improves your car's handling ability, while reducing T-top squeaks, dash rattles, and quarter panel flexing. They are designed for autocross, road racing, and drag racing setups. Connecting the front and rear subframes together allows for better weight transfer, improved traction, and straighter launches. Additional features include: * Constructed from 1.750 in. x 0.120 in. DOM mild steel tubing * 3-point brace uses 1.250 in. x 0.095 in. DOM mild steel tubing * Front mounting points feature 0.250 in. thick mild steel mounting plates * Mounting plates feature precision CNC-machining to ensure tolerances * MIG-welded construction * Durable powdercoated finish
( 10 )
$499.99
—
$659.99
The more improvements you do to the vehicle, the more demands are put on the body. These Global West subframe connectors provide additional support to increase the integrity of the chassis. They are a must for any performance application. They're built out of round 1 5/8 in. x .125 in. wall roll cage tubing. The construction attaches to the factory support rails located directly under the front seats. The rear portion of the subframe attaches to the rear leaf spring mount and frame rail. Additional gussets are included in the kit, which add support to the rear spring mount. Welding is required for installation.
( 97 )
$350.75
Tin Soldier Racecars Low Prep 4-link kits have taken what they have learned from some of the fastest stock suspension and 4-link small tire cars and combined them into one universal kit. The shorter upper bar allows the car to separate quickly on the launch like a stock suspension car, while keeping the versatility and strength of a traditional 4-link. It's truly the best of both worlds. The chassis brackets are laser cut from 1/4 in. thick plate and feature 1/2 in. staggered holes for all the adjustment you need whether on a radial or slick. The chassis brackets are notched on bottom for 1 5/8 in. tube and have through holes for a 1 5/8 in. tube on top (12 in. spread between). Each bracket has ProJack tabs incorporated into the bottom of the brackets. The axle housing brackets are designed around 275/315 or 28/29 in. tall tires, but still work well with larger tires. They are laser cut from 1/4 in. thick plate and feature 1/2 in. staggered holes for all the adjustment you need whether on a radial or slick. The axle housing brackets are made for 3.5 in. axle tubes and feature 6 in. of shock adjustment in 3/4 in. increments, while including ProJack tabs incorporated into the bottom of the brackets. Steel shock mounts are included. The bars are made from chromoly tube and feature 3/4 in. HD chromoly rod ends with zinc plated jam nuts. The bungs feature a hex adjuster and are constructed from chromoly. Tin Soldier Racecars Low Prep 4-link kits were originally designed for drag radial cars, but after much testing we have found that they really work well on no-prep to moderate prep on any small tire, slick, or radial. If you're looking to increase your traction and lower ETs these kits are for you.
Not Yet Reviewed
$954.99
These Competition Engineering universal frame rails provide the perfect foundation for just about any race suspension. Available for 4-link and ladder bar suspensions, these mandrel-bent rails provide solid mounting for your suspension and rear axle components, while allowing you to run a low ride height or taller race tires.
( 7 )
$417.99
—
$499.99
UMI Performance tubular subframe connectors are designed to tie the front and rear subframes together using bolt-in hardware supplied and they require no welding! Subframe connectors improve your car's handling ability, while reducing T-top squeaks, dash rattles, and quarter panel flexing. They are designed for autocross, road racing, and drag racing setups. Connecting the front and rear subframes together allows for better weight transfer, improved traction, and straighter launches. Their setup tucks tightly against the floor using strong tubing, causes no ground clearance loss, and cannot be seen from the side of the vehicle. Additional features include: * Constructed from chromoly or mild steel tubing * Front mounting points feature 0.250 in. thick mild mounting plates * Mounting plates feature precision CNC-machining to ensure tolerances * Tubular design allows for a tighter fit against the vehicle's undercarriage * Uses rear control arm mount for increased strength and ensures proper installation * MIG-welded construction * Durable powdercoated finish
( 39 )
$349.99
Steeda's full-length subframe connectors are perfect for daily drivers or serious cars with high-horsepower, sticky tires or a competition suspension. Steeda starts with beefy 1.5 x 2 in. square tubing that spans the full length of the floor pan, providing unmatched chassis rigidity, improved handling, and improved ride quality with reduced impact harshness. Steeda's subframes are reinforced at each bend and include Steeda's exclusive torque box reinforcing plate for the strongest attachment possible to the rear subframe for maximum effectiveness. Steeda's full-length subframe connectors also feature a one-piece reinforced seat bolt cross brace. Steeda's cross braces have reinforcing gussets built in for greater strength with less welding, making for an easier installation experience. These Steeda full-length subframe connectors come with all mounting point tabs pre-welded to the subframe connectors. They come available in bare steel or black powdercoated finishes.
( 4 )
$259.95
Make lifting your vehicle a breeze with Steeda Ultra-Lite jacking rails. These lightweight systems are made in-house from sturdy CAD-designed, laser-cut, high-strength steel and feature a durable finish. They're available as weld-in or a simple bolt-in design that can be removed at any time using factory mounting holes. The rails are offered in different lengths to help with your strengthening needs. They allow you to jack up your car with confidence anywhere along the rail, preventing damage—and also function as undercarriage protection if you are riding lowered. The rails add strength and function to your vehicle and make putting your car up on stands quick and easy.
( 26 )
$199.95
—
$284.95
Detroit Speed strut tower braces are made from quality steel and utilize a unique closed triangle shape design to reinforce the front sub-structure and strut towers. Connecting the front strut towers will improve overall vehicle stiffness and increase handling and performance. These braces can be installed with simple hand tools; no welding is required. The strut tower brace and double plates are powdercoated satin black, and the kit comes with all required mounting hardware for a direct bolt-on installation. Order the brackets designed for your vehicle.
Not Yet Reviewed
$314.95
Rust Buster comes in with a solution better than the Factory OEM crossmember. The spare tire crossmember is a crucial component designed to enhance the structural integrity of your vehicle's rear frame, ensuring that your spare tire is securely held in place. This repair piece serve as a faithful OE replacement, preserving the authenticity of your vehicle's design while elevating its overall structural integrity. Designed as a bolt-on part, installation is straightforward and hassle-free. Each crossmember is meticulously engineered and features mounting location holes that are slotted for optimal fitment for the perfect blend of strength and durability. For added protection against rust and corrosion, this support piece comes with a rust-preventative oil coating, ensuring your investment stands the test of time. Drive with confidence, knowing your spare tire is securely supported with the quality and precision of a spare tire crossmember by Rust Buster. Order the model for your make/model.
Not Yet Reviewed
$329.99
—
$349.99
Rust Buster frame repair sections help you replace those rusted or damaged frame rail areas on your truck or SUV. The EZ slip design allows the repair section to slide onto the frame and will include all the factory needed holes and mounting locations. Rust Buster uses the latest in CAD to model each repair section before it is laser-cut, formed and finish welded. Keep your ride on the road for years to come with Rust Buster frame repair sections.
( 35 )
$169.99
—
$299.99
Bolster your street machine with UMI Performance adjustable strut tower braces. Easy to install, these braces offer an inexpensive modification with big benefits. Connecting the front strut towers makes your chassis stronger and fortifies your suspension. You'll feel the improved handling and quicker response in and out of corners. Plus, you'll be able to tweak the braces for a custom fit for your ride. Manufactured in the USA, UMI adjustable braces are crafted from mild steel tubing with CNC-machined 3/16 in. thick mounting plates and 4130 chromoly tube adapters and heavy-duty rod eyes. Strengthen your chassis for improved performance with UMI Performance adjustable strut tower braces.
( 32 )
$239.99
One of the most effective ways to improve the stiffness and handling of your vehicle is to box the factory chassis. Hellwig Frame FX kits makes it easy for you. Rather than taking considerable time with measuring, cutting, and fitting steel panels these kits simplify the process effectively. Some vehicles have an open C-channel chassis that's only 3 in. wide at the top and bottom. This design is inherently weak in handling torsion and marginal in bending. Frame FX kits double the width of the tension side of the frame rail and close the area for dramatic increases in torsional and bending stiffness. They're comprised of 14 pre-cut 10-gauge steel panels matching the thickness of the factory frame--and fit into the weak points of the factory chassis. Hellwig engineered another panel that adds an extra mount to tie the floor to the chassis, furnishing even more strength to the entire car. In addition, brackets are provided to mount the transmission crossmember, with enough adjustment to accommodate nearly any drivetrain configuration. The increased strength via Hellwig Frame FX kits results in improved handling and ride quality, while retaining the factory chassis and mounting points.
( 20 )
$784.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
