Availability
Showing In Stock Items. Show All 178 Items.
These Ford Performance Parts F-150 supercharger kits are designed to put approximately 160 hp and 160 ft.-lbs. of torque at the rear wheel. They feature an intercooled design, use the factory throttle body, and include a 95mm mass air meter. Ford Performance Parts F-150 supercharger kits include a Pro-Cal voucher to get your computer custom-calibrated.
( 1 )
$9,619.99
Fleece Performance offers Cheetah FMW VNT turbochargers for a variety of diesel trucks to enhance your driving experience. These drop-in replacements come with a Fleece-engineered 63mm FMW compressor wheel and high-flow Cheetah turbine wheel. You'll enjoy the spool-up and throttle response of a small turbo and still get the big top-end power you're looking for. Rated at up to 650 rear wheel horsepower (depending on model), this is the ultimate combination for dual-purpose applications. If you're towing during the week and sled pulling on the weekend, the 63mm FMW VNT Cheetah is just the ticket. Order the turbo model recommended for your vehicle. Additional details: * Stock appearing: Uses the stock housings with updated internals. This allows you to keep all factory systems intact, yet enables you to safely run 40 psi of boost. No aftermarket components or modifications needed for installation. * Proven Technology: Built with genuine Garrett Turbocharger parts. They feature upgraded shaft bearings and 360 degree thrust bearings. * Powerful Yet Responsive: Turbochargers spool like stock, thanks to the variable nozzle technology (VNT) which allows the turbo to act smaller upon spool-up and then open up to flow more exhaust on the top end. * Exclusive FMW wheel technology: – Forged milled wheels – Faster spool-up – Increased throttle response – Broader torque curve
( 2 )
$2,599.00
Edelbrock Performer RPM Dual Quad Air-Gap manifold and carburetor kits provide everything needed to convert from a single carburetor intake to a powerful dual-quad carburetor intake system for small block Chevys. These kits include the new RPM Dual Quad Air-Gap intake, two 500 cfm Thunder Series AVS carburetors (one manual choke, one electric choke), Edelbrock high-tech progressive throttle linkage, a fuel line, and intake manifold gaskets. These kits are available in your choice of natural or the popular EndraShine finish.
( 7 )
$1,865.95
—
$2,126.95
JLT engineers set out to create the biggest and baddest intake on the market—and the result was their JLT Performance Series 1 cold air intake kits. These assemblies are fully computer designed to optimize space and give the best fit and finish. A roto-molded plastic tube resists engine heat and keeps the intake air charge nice and cool; while a smooth, tapered path to the throttle body increases air speed and horsepower. The intakes also feature a heat shield designed to help keep hot air out by firmly hugging and sealing itself to the contours of the hood. For great looks and more power, order the JLT Performance Series 1 cold air intake kit designed for your vehicle application.
( 6 )
$349.00
With any older standard cab truck, getting the stock gas tank out of the cab to free up some space and move some weight toward the rear of the truck is always a good idea. Classic Performance aluminum gas tanks fit between the frame rails, are fully baffled, and are compatible with EFI or carburetors. They are made from 0.125 in. 5051 aluminum with 0.187 in. thick brackets and are the thickest on the market. Once installed, the fuel filler can pass through the bed floor, or a custom side fill can be added (requires a small C-notch in the frame). Classic Performance aluminum gas tanks are vehicle specific, install without having to move crossmembers, and you'll end up with a tank that not only looks better, but also helps your truck perform better. Sending units are sold separately.
( 2 )
$598.99
Amplify your driving experience with a Fleece Performance Cheetah turbocharger. Featuring a Fleece exclusive 63mm FMW compressor wheel and a high-flow turbine wheel, these turbos are capable of supporting up to 650 rear wheel horsepower without sacrificing any drivability. These drop-in replacements offer smooth and quick throttle response with big top-end power. Whether you're towing, racing, sled pulling, or just driving to work, the Cheetah will get the job done. Order the model recommended for your truck.
( 2 )
$2,699.00
—
$3,099.00
Edelbrock Performer RPM intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer RPM aluminum intake manifold that is coated with Edelbrock's EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and an Edelbrock Thunder AVS 800 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer RPM intake features larger plenums and runners for engines with a camshaft, exhaust, and other performance modifications. Ready for a change? Try these Edelbrock Performer RPM intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 4 )
$1,081.95
—
$1,101.95
Edelbrock Performer RPM Air-Gap intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer RPM Air-Gap aluminum intake manifold that is available in a variety of finishes, an intake gasket set, intake manifold bolts, a carburetor stud kit, and an Edelbrock Thunder AVS 800 cfm electric choke carburetor. The Edelbrock Performer RPM Air-Gap intake uses an open air space that separates the runners from the hot lifter-valley cover. This results in a cooler, denser charge that means more power and excellent throttle response. Ready for a change? Try these Edelbrock Performer RPM Air-Gap intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 2 )
$1,106.95
—
$1,149.95
On Sale
K&N 63 Series Aircharger high performance cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 63 Series Aircharger cold air intake kit best suited for your application!
( 602 )
$524.99
—
$682.99
$474.99
—
$632.99
Tired of dealing with the Ford Twin Scroll turbo ball bearing failures, ATS Diesel Performance set out to build, from the ground up, a completely redesigned turbo for the 2011-14 Ford 6.7L F250/350 and the 2011-16 Ford Cab and Chassis. Utilizing years of technology with proven reliability from its existing Aurora VFR Turbo, line the Aurora 400 VNT Stage 2 represents the future of ATS turbocharger technology. These are performance turbos specifically designed to be drop-in replacements when modified tuning is already in place. From a double journal bearing to a billet compressor wheel, ATS spared no expense bringing the best turbo available to market for these Ford trucks. Additional details: * 100 percent all-new components, no core charge. HSM turbine housing and stainless steel VNT turbine pack * Ground up design, application-specific models available for Ford 2011-14 6.7L and 2011-16 Cab and Chassis trucks * Custom double journal bearings support higher horsepower and significantly better reliability over the original ball bearings * These are drop-in replacement turbos to replace the factory twin scroll turbo; no additional hardware or piping is required * Specially designed to support modified or aftermarket tuning (aftermarket tuning required) * All-new ATS VNT technology * Custom billet 8x8 compressor wheel * Oversized mixed-flow turbine wheel * ATS velocity stack compressor section * Will support well over 500 hp * Fully hydraulic actuator * The ATS VNT is 100 percent rebuildable and designed with modular components, making it sustainable for decades of use
Not Yet Reviewed
$2,559.99
Redhorse Performance 5910 Series high-flow fuel rails are perfect for any custom fuel rail application. These universal blank fuel rails have a billet aluminum construction with 1/2 in. diameter opening and come in pre-cut lengths for you to choose from. So, if you want a fuel rail extrusion that can be machined for a variety of fuel injectors and mounting configurations, the Redhorse Performance 5910 Series high-flow fuel rails are your answer.
Not Yet Reviewed
$116.05
Fleece Performance Cheetah Holset turbochargers are 100 percent drop-in, bolt-on, and enjoy big top-end power units. These turbos provide quick and smooth throttle response, lower EGT's, and stock-like spooling with 40 to 45 psi operating range. They use a high-flow turbine wheel and Fleece's 63mm billet compressor wheel in order to support up to 650 rwhp. Give your diesel truck the kind of bolt-on performance most vehicles only dream of—with Fleece Performance Cheetah Holset turbochargers!
( 3 )
$4,499.00
On Sale
AWE Tuning Performance intercoolers are 37 percent larger than stock. The high-flow bar and plate style aluminum units have resulted in intake temperatures reduced by up to 55 degrees F and improved drop pressure resistance through the core. If your engine runs hot, tackle the high intake air temps with a Performance intercooler. Drivers have experience double-digit gains in horsepower and torque! Order the model recommended for your vehicle. Additional product details: * Forced induction * Perfect fitment, guaranteed * No cutting or grinding of car or brackets * Some models include silicon intercooler pipe * Mounting brackets included * Fits securely behind stock crash bar
Not Yet Reviewed
$925.00
—
$2,065.00
$827.63
—
$1,847.63
Wagner Tuning performance intercoolers easily replace OEM coolers and provide performance gains, less pressure drop, and lower intake temperatures. Optimized by CAD, most feature bar and plate construction for generally greater heat rejection than many tube and fin designs (models with turbulators offer even greater heat rejection). They are also less likely to be damaged by rocks and debris. Engineered for efficiency and designed to remove bottlenecks, their cast aluminum end tanks were improved further with flow analyses and simulations. Treated with a protective anti-corrosion coating with perfect thermal heat-dissipating characteristics, Wagner Tuning performance intercoolers are a great choice.
Not Yet Reviewed
$450.00
—
$750.00
On Sale
Summit Bucks
Mishimoto performance air intakes are engineered to be a direct-fit for your vehicle and an excellent upgrade to replace the stock air box. They're guaranteed to boost your automobile's torque and horsepower, and feature Mishimoto's lifetime warranty. The aluminum or silicone tubes are available in a variety of finishes; and an efficient cotton gauze filter is included. Order the model designed for fitment on your vehicle application.
( 1 )
$952.95
$857.66
On Sale
Summit Bucks
Mishimoto air-to-water performance intercooler Power Packs include S55 Performance intercooler, heat exchanger, and charge pipe kit to strengthen weaknesses in the BMW's design. The Power Packs are offered in a choice of 12 BMW-specific color matching options or classic black, so your go-fast parts in the engine bay can now match the exterior beauty of your BMW. Mishimoto's charge pipes feature full-aluminum construction with a cast mid-section and matte black silicone couplers that can handle the boost pressure, unlike the factory plastic that can crack under pressure, or split at the seams, creating a less than ideal situation as you pilot your vehicle. Next, the non-descript box is replaced with a stylish, colorful air-to-water intercooler featuring a bar-and-plate core with increased core volume and a single-pass coolant flow layout for optimal heat transfer. Adding to both these improvements is Mishimoto's larger full-aluminum heat exchanger providing increased external fin surface area and core volume. Additional features and specs: * 12 degree F drop in intake air temperatures and 10 degree F reduction in global intercooler coolant temperatures * Dyno-proven average power gains of 11 WHP and 8 WTQ with peak gains of up to 31 WHP and 10 WTQ on Stage 1 tuned vehicle * Intercooler features unique bar-and-plate, single-pass coolant passage design, and cast aluminum end tanks for optimal flow and cooling capacity * Intercooler core volume increased by 29 percent with 16 percent improved flow * Heat Exchanger features all-aluminum construction with 180 percent increase in fin surface area and 60 percent increase in core volume * Heat exchanger includes optional stone guard for added protection against road debris * Heat exchanger utilizes variable fin pitch for improved flow to DCT cooler * Mishimoto lifetime warranty
Not Yet Reviewed
$2,652.95
$2,069.29
On Sale
Summit Bucks
Summit Racing™ Performance turbochargers have the latest in compressor aero technology with quick-spooling, yet free-flowing turbines. Starting with 66mm inducer sizes and working up to 79mm, the SUM-2600 Series turbos are reliable and a great value. The SUM-2700 Series are true race turbos starting at 76mm and go up from there. T4, T6, and V-band turbine housings are available. These are specially designed, balanced, and precision assembled in North America for class leading racers. They feature 2618 billet forged compressor wheels that offer superior flow and dependability at high boost.
( 7 )
$2,017.99
Wagner Tuning EVO performance intercoolers are the best choice for performance gains and low intake temperatures. They provide additional frontal area and more volume than OE intercoolers. In addition to the increased intercooler core size and efficiency, Wagner engineers improved the end tank design to remove any OEM bottlenecks; resulting in increased flow ratings and charge cooling properties. Wagner Tuning competition intercooler cores are some of the highest quality and lowest weight bar and plate cores available. Many feature turbulators and free-form cast aluminum end tanks optimized by CAD; flow analyses and simulations were used to optimize their design for the best possible internal airflow. They are finished with an anti-corrosion protective coating with perfect heat-dissipating properties.
Not Yet Reviewed
$680.00
On Sale
Summit Bucks
Mishimoto air-to-water performance intercoolers are built with cast aluminum end tanks that are precision TIG-welded to a robust bar-and-plate core. The cast end-tanks reduce potential failure points, making them more reliable against possible leaks than cut and welded tanks. Order a Mishimoto air-to-water performance intercooler for performance gains and peace-of-mind reliability. Available in a multiple powdercoated finishes
( 1 )
$2,196.95
$1,977.26
PowerMax Performance Diesel turbochargers supply your light-duty diesel with the best components for optimizing power, response, and efficiency. PowerMax turbochargers are quick-spooling, high-flowing turbochargers with the right blend of design features that will upgrade power and torque, while lowering EGTs for select diesel trucks. Whether you own a Ford, Dodge, or GM diesel pickup truck, PowerMax has a ball-bearing turbocharger for you! Turbocharger and installation instructions, as well as other components needed for your specific application are included. Features and benefits of PowerMax turbochargers: * Large bore inducer--allows greater airflow for high performance diesels with increased fuel flow * Advanced design compressor wheels--extremely high-efficiency, backward-curved impellers, which allow for a broad airflow range to match the needs of diesels * Exclusive true angular-contact ball bearings--meaning the turbo spools up to 15 percent faster, is capable of high-thrust loads seen in high performance/high-boost applications, and increases overall turbo efficiency by reducing power consumption by nearly 50 percent over traditional journal bearing designs * Performance enhancing oil restrictor--optimizes oil flow for proper lubrication and cooling, while limiting turbo rotational drag which robs power and efficiency * Divided turbine housing--divider wall within the turbine volute optimizes pulse gas energy, which gives greater response and turbine efficiency during low-end and mid-range operation * Ultra-high pressure/high-efficiency turbine--extracts a maximum of energy from the engine's exhaust. Using GMR235 super alloy, the turbine wheel design is optimized for high exhaust flow, and low weight to reduce moment of inertia assisting in crisp response to changes in engine speed * Turbine outlet connection--designed to fit as a direct drop-in to enhance the ease of upgrading stock turbos * Turbine heat shielding--PowerMax utilizes a heat shield to create "dead air space" insulation barrier to keep high exhaust heat energy in the turbine to be converted to mechanical energy, and away from bearings and oil * Design optimized turbine housing--advanced 3D modeling and computational fluid dynamics are used to optimize the volute shape, and the housing is also equipped with an adjustable wastegate allowing adjustment for optimum boost levels * Oil control and seal--a double-row flinger which drives drain oil away from the gas seal rings virtually eliminates compressor oil sealing problems
( 3 )
$2,999.99
BD Diesel remanufactured performance turbo head units use the latest in aerodynamic technology and materials that feature upgraded 58mm lightweight extended-tip compressor wheels with high-flow blade design characteristics for improved throttle response time. They offer cooler exhaust temperatures, improved engine brake retarding power, and the most rugged bearing system in the turbo industry. Their updated look with natural finished cast aluminum meets the highest of standards. If you're looking for a remanufactured turbo head unit that will give you consistent, dependable performance, BD Diesel remanufactured performance turbo head units won't let you down.
Not Yet Reviewed
$2,130.00
On Sale
Unlock exhilarating performance from your 2022 Mustang with 750 horsepower and 670 lbs.-ft. of torque provided by the Roush 5.0L Mustang Phase 2 Supercharger kits! Building off the 5.0L V8 engine, the Roush Supercharger adds an impressive 300 hp and 260 lbs.-ft. of torque over the stock engine. Included in these Roush Supercharger kits is their high-capacity cooling technology with a full-face low temperature radiator. The larger low temperature radiator provides increased cooling capability, allows for greater power output, and delivers maximum performance. Compatible with both automatic and manual transmission vehicles, these Roush Supercharger kits feature Eaton's coveted TVS R2650 technology for increased power output throughout the rpm band and are engineered for durability with large bearing and timing gears. The 2022 Mustang Supercharger kit by Roush had to meet new Tier 3 Emissions Standards required on the base Mustang for this model year. Roush achieved this by incorporating a hydrocarbon trap in the air induction system as well as a unique calibration for the 2022 model year. Thanks to massive engineering efforts, they were able to maintain previous model year performance targets for power and torque. Because Roush is with you on this ride, their Supercharger kit includes the Roush's 3-year/36,000-mile Limited Powertrain Warranty when installed by an ASE certified technician. The Supercharger kit's calibration is optimized for 93-octane fuel but is also compatible with premium fuel. Product features and highlights: * Fits 2022 Mustang GT 5.0L V8 * Produces 750 horsepower and 670 lbs.-ft. of torque! * High-Capacity Cooling Technology with a full-face low temperature radiator * Compatible with both automatic and manual transmissions * Features Eaton's TVS R2650 technology for increased power output throughout the rpm band * Engineered for durability with large bearings and timing gears * Calibration optimized for 93 octane fuel, compatible with premium fuel * Includes all necessary installation hardware Note: Not compatible with Ford Mustang 5.0L equipped to meet Euro 6.2 emission standards. (Euro 6.2 dictates the use of particulate filters which are not compatible with the ROUSH Supercharger system). Not compatible with Mach 1, Bullitt, or GT350.
Not Yet Reviewed
$8,799.99
$8,007.99
On Sale
Do you want more power under the hood of your Ford? Roush R2300 Roushcharger kits are just what you need. Featuring a TVS (Twin Vortices Series) supercharger, these kits create big performance with unsurpassed reliability. They also feature 4-lobe rotors and high-flow inlets and outlets for more volumetric capacity at higher rpm to give you serious ground-pounding power. Available in several configurations, depending on your power needs and application, Roush R2300 Roushcharger kits are sure to have your Mustang beating all of the competition and ruling the streets.
Not Yet Reviewed
$7,749.99
$7,052.49
On Sale
You can transform your 2024 Ford Mustang into a true beast with Roush Phase 2 supercharger kits. Developed in partnership with Magnuson Superchargers and using Roush diagnostic tuning software for best-in-class calibration delivery and diagnostic capability, they unleash an extraordinary 810 hp and 630 lbs.-ft. of torque, propelling your driving experience to new heights. Each kit boasts a dual throttle body, front inlet, front drive, dual intercooled, inverted R2650 system with an 84mm pulley, peaking at 13 psi boost at 7,500 rpm. Revel in the unparalleled power, drivability, and performance that will make every drive an exhilarating experience. Features and benefits: * Dual front inlet, front drive, TVS R2650 supercharger with optimized, high flow inlet port for ultimate airflow capability * Unique Roush Red head unit * Reuses stock 80mm throttle bodies; retains symmetrical appearance and allows for reuse of stock induction components * Inverted design allows for large, high-efficiency, dual intercoolers for excellent heat transfer and lower intake air temperatures * High-flow, dual cone fuel injectors with optimized director plates for ideal injector targeting * Custom, billet fuel rails provide maximum flow with minimum restriction, while also ensuring correct injector orientation every time * Custom FEAD design and hardware allow for supercharger belt to run closer to the engine to reduce load on the crankshaft for ultimate reliability and durability * Large front heat exchanger provides the lowest possible intercooler temperatures while minimizing restriction to the stock cooling module; custom design for ease of installation--does not require removal of the vehicle fascia (less install time, less risk of damage) * Custom degas bottle provides huge volume and eliminates coolant aeration for ultimate cooling capacity * High-flow Bosch PCE intercooler pump * All hoses are custom formed for ultimate ease of installation and underhood appearance * Kit packages under the factory hood and K-brace with no modifications (K brace does not need to be removed for installation) * All wiring is plug-and-play * Colder heat range, reduced gap, high-quality Ford Performance spark plugs
Not Yet Reviewed
$9,995.00
$9,495.25
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
