Availability
Showing In Stock Items. Show All 49 Items.
Summit Bucks
Edelbrock E-Force Universal Head Units use Eaton R2650 rotors. This is a front drive, front inlet, blow-down style supercharger housing intended for universal and custom applications. The high twist, 4-lobe R2650 rotor design is 15 percent larger than the TVS 2300 and features several improvements to maximize efficiency and performance at upper rpms. Improvements and advantages of R2650 rotors over R2300 rotors: * 170 degree twist (verses 160) * Better sealing with optimized length-to-diameter ratio * Increased durability with larger bearings and timing gears * Pressure relief ports in bearing plate for reduced input power * 4 percent more efficient * 15 percent larger displacement * 18 percent less input power required * 25 percent more airflow at 18,000 rpm and 14 psi boost (2.0 pressure ratio)
Not Yet Reviewed
$2,697.95
BD Diesel remanufactured turbo head units use the latest in aerodynamic technology and materials that feature lightweight, extended-tip compressor wheels with high-flow blade design characteristics for improved throttle response time. They offer cooler exhaust temperatures, improved engine brake retarding power, and the most rugged bearing system in the turbo industry. They feature a new look with natural finished cast aluminum that meets the highest of standards. If you're looking for a remanufactured turbo head unit that will give you consistent, dependable performance, BD Diesel remanufactured turbo head units won't let you down.
Not Yet Reviewed
$1,539.95
—
$2,387.00
BD Diesel remanufactured performance turbo head units use the latest in aerodynamic technology and materials that feature upgraded 58mm lightweight extended-tip compressor wheels with high-flow blade design characteristics for improved throttle response time. They offer cooler exhaust temperatures, improved engine brake retarding power, and the most rugged bearing system in the turbo industry. Their updated look with natural finished cast aluminum meets the highest of standards. If you're looking for a remanufactured turbo head unit that will give you consistent, dependable performance, BD Diesel remanufactured performance turbo head units won't let you down.
Not Yet Reviewed
$2,130.00
BD Diesel Screamer turbochargers may offer a stock drop-in installation and appearance, but they are anything but stock! They feature a larger ballistic billet compressor wheel and BD's exclusive turbine profile that results in reduced backpressure and increased turbine flow compared to the competition. You get more potential maximum power output, right up to 690 hp with performance modifications. Each turbocharger is high-speed balanced with the actuator stroke tested prior to shipping.
( 2 )
$2,230.00
—
$2,448.00
Magnuson supercharger kits make power you can live with! Magnuson's powertrain integration technology offers you the ability to have big horsepower and drivability in the same supercharger. This technology recalibrates the engine and transmission control programs to work with the altered induction path and boost pressure of the supercharger. And that produces a seamless and consistent delivery of power over the entire rpm range--not just the high end! For you, that means Magnuson superchargers will boost your power output, and yet run like their factory installed units. Whether you're driving a Corvette or a Cadillac, a Silverado or a Hummer, or a Camaro or a Mustang, Magnuson supercharger kits deliver maximum performance!
( 12 )
$7,195.00
—
$8,995.00
Whether you have a mundane daily driver or a high-horsepower racer, Vortech has a supercharger kit for you. Their centrifugal supercharger kits feature lightweight aluminum impellers that are heat-treated and high-speed balanced to ensure smooth operation. An O-ring compressor housing seal and an innovative impeller seal improve sealing and reduce friction. Vortech has taken away the headaches of building a custom kit by engineering these kits to have a true OEM-quality fit and finish. Each kit is 100 percent complete, right down to the wire ties. Most kits include a matched compressor supercharger unit with SQ technology for "Super Quiet" operation. A high-flow air intake system with a reusable air filter, heat-resistant silicone hose couplings, and premium-grade flex hose is included as well. Additional features: * Flow-tested cast aluminum and/or urethane air discharge tubing * OEM-style, heat-treated cast 356 aluminum mounting brackets * Supercharger drive pulley * Integrated belt tensioner * Premium drive belt * Stainless steel clamps * Heavy-duty mounting hardware * Choice of satin or polished finish * Step-by-step, fully illustrated installation manual
( 9 )
$3,633.99
—
$10,390.99
Wagner Tuning competition intercoolers replace your OEM unit with performance gains and low intake temperatures. Optimized by CAD, most feature lightweight, low restriction tube and fin construction, with a competition high-speed core and cast aluminum end tanks to give these intercoolers excellent cooling properties with less pressure drop. The design was improved further with flow analyses and simulations. Wagner Tuning competition intercoolers deliver an easy fitment and maximized cooling. They are treated with a protective anti-corrosion coating with perfect thermal heat-dissipating characteristics. Order the model designed for your vehicle application.
Not Yet Reviewed
$790.00
—
$3,440.00
On Sale
You can transform your 2024 Ford Mustang into a true beast with Roush Phase 2 supercharger kits. Developed in partnership with Magnuson Superchargers and using Roush diagnostic tuning software for best-in-class calibration delivery and diagnostic capability, they unleash an extraordinary 810 hp and 630 lbs.-ft. of torque, propelling your driving experience to new heights. Each kit boasts a dual throttle body, front inlet, front drive, dual intercooled, inverted R2650 system with an 84mm pulley, peaking at 13 psi boost at 7,500 rpm. Revel in the unparalleled power, drivability, and performance that will make every drive an exhilarating experience. Features and benefits: * Dual front inlet, front drive, TVS R2650 supercharger with optimized, high flow inlet port for ultimate airflow capability * Unique Roush Red head unit * Reuses stock 80mm throttle bodies; retains symmetrical appearance and allows for reuse of stock induction components * Inverted design allows for large, high-efficiency, dual intercoolers for excellent heat transfer and lower intake air temperatures * High-flow, dual cone fuel injectors with optimized director plates for ideal injector targeting * Custom, billet fuel rails provide maximum flow with minimum restriction, while also ensuring correct injector orientation every time * Custom FEAD design and hardware allow for supercharger belt to run closer to the engine to reduce load on the crankshaft for ultimate reliability and durability * Large front heat exchanger provides the lowest possible intercooler temperatures while minimizing restriction to the stock cooling module; custom design for ease of installation--does not require removal of the vehicle fascia (less install time, less risk of damage) * Custom degas bottle provides huge volume and eliminates coolant aeration for ultimate cooling capacity * High-flow Bosch PCE intercooler pump * All hoses are custom formed for ultimate ease of installation and underhood appearance * Kit packages under the factory hood and K-brace with no modifications (K brace does not need to be removed for installation) * All wiring is plug-and-play * Colder heat range, reduced gap, high-quality Ford Performance spark plugs
Not Yet Reviewed
$9,995.00
$9,495.25
Standard Motor stock replacement remanufactured turbochargers use quality components to ensure maximum performance. These units are automaker- and vehicle-specific for easy fitment and installation. Most turbos include OEM electro hydraulic control valves, eliminating the need to purchase separate parts. Find the model recommended for your application, then save money with a pre-owned and re-vitalized turbocharger from Standard Motor.
Not Yet Reviewed
$1,028.99
On Sale
APR intercooler systems result in repeatable performance—even in the most demanding of situations. These massive front-mounted upgrades dramatically reduce intake air temperature (IAT), minimize heat soak, and provide increased performance in easy-to-install, direct bolt-on designs. The superior effectiveness and performance of APR systems is focused around core selection, end tank design, and specific install location for each application. Balancing all the necessary characteristics, APR's engineers perfected units with exceptional cooling and lowered pressure loss across the core, while maintaining critical airflow to components behind the system—delivering maximum performance and far exceeding the capabilities of factory intercoolers. Features may include: * Aluminum construction * Large bar-and-plate design with densely packed staggered and louvered fins * Smooth cast aluminum end tanks engineered for low turbulence/restriction and maximum flow * Pressure tested to prevent power robbing boost leaks * Full directions and APR world-renowned customer support * Some systems may include CNC-bent and TIG-welded mounting brackets, high-quality multi-ply silicone inlet and outlet hoses, T-bolt clamps, and billet MAP sensor housings
Not Yet Reviewed
$1,499.95
$898.95
—
$1,499.95
If you hear excessive whistling noises or believe your stock turbo is damaged, you need Standard Motor stock replacement new turbochargers. These 100 percent new units are designed for a direct-fit installation into specific gasoline or diesel applications. They come ready to roll with high-grade materials and complete gasket kits to ease installation.
( 1 )
$2,276.99
On Sale
Efficiency is the name of the game and the COBB Tuning front mount intercooler cores are a winner! They will allow you to get the most out of your stock turbo—and still have plenty left over for future upgrades to go along with it. COBB units are a larger volume, larger core unit that will help reduce intake charge temperatures, especially if you're making more power from the factory. Plus, these intercoolers are a direct drop-in core that arrives ready to install to run with factory intercooler plumbing. If you're looking for an effective solution to eliminate inconsistent power delivery from your turbocharged vehicle, look no further than the all new COBB Tuning front mount intercooler cores! Additional COBB front mount intercooler core features include: * Larger size, front mount intercooler made from high-grade aluminum in choice of black or silver finish * Unique, custom designed fin within the "hot side" endtank helps to evenly disperse incoming air across the entire core * Easiest way to drastically improve power when coupled with tuning from the V3 Accessport * Bar and plate structure * Cast end tanks with the COBB logo * 4-ply black silicone couplers and worm clamps ensure a leak-free connection to the factory charge pipes * No cutting or fabrication required for installation
Not Yet Reviewed
$1,045.00
—
$1,150.00
$940.50
—
$1,035.00
On Sale
COBB Tuning front mount intercooler kits replace your overworked stock units to deliver a drastic increase in cooling and power, especially when paired with tuning from Accessport (not included). Available for several applications, most of these kits feature larger cores with efficient bar and plate designs and cast aluminum end tanks, piping, and more (depending on your application). Escalating intake air temperatures under the hood can overwhelm your factory FMIC with heatsoak and take away power. Put one of these COBB Tuning front mount intercooler kits near the top of your modification list and make your car come alive with new found colder air charge.
Not Yet Reviewed
$1,070.00
—
$1,675.00
$963.00
—
$1,507.50
On Sale
Ready to take your 2024 5.0L Mustang GT to the pinnacle of performance? Roush Phase 1 supercharger kits are engineered to transform your Mustang into a 740 hp powerhouse with unbeatable durability, cooling, and power delivery. The 740 hp, 600 lbs.-ft. of torque Roush S650 Mustang Phase 1 supercharger kit is engineered to provide exceptional performance through innovative design and cutting-edge components, tailored specifically for Mustang enthusiasts seeking peak horsepower and reliability. Roush achieved a 10.55 second 1/4-mile at 133 mph and 0-60 3-seconds with a 1.39G acceleration force on a stock car with this supercharger and slicks on a prepped track (10R80 automatic transmission, 3.55 rear gear ratio). Additional product features and benefits: * This supercharger features a dual front inlet and front-drive setup, maximizing airflow with an optimized, high-flow inlet port. It's designed for ultimate airflow capacity, ensuring your engine breathes freely to produce unparalleled horsepower. * The supercharger head unit boasts a unique Roush Red finish, adding an unmistakable, high-performance look to your engine bay. * The kit reuses the factory twin 80mm throttle bodies, retaining a symmetrical appearance and allowing you to reuse stock induction components for a clean and streamlined look. * Featuring an inverted design, the Roush Phase 1 kit houses dual high-efficiency intercoolers. This setup maximizes heat transfer while lowering intake air temperatures, keeping your engine cool under high demand. * High-Flow Dual Cone Fuel Injectors: Equipped with optimized director plates, the injectors target fuel precisely for efficient combustion and enhanced performance. * Billet aluminum fuel rails provide maximum flow with minimal restriction, ensuring correct injector alignment and a consistent fuel supply to meet the demands of high performance driving. * Designed with a custom FEAD, 90mm pulley, and strategic hardware placement, the supercharger belt runs closer to the engine, reducing crankshaft load and enhancing overall reliability. * The large front heat exchanger delivers exceptional intercooling with minimal restriction to the factory cooling module. Its custom design makes installation straightforward, with no need to remove the front fascia, saving install time and minimizing any risk of damage. * Each kit includes a high-capacity degas bottle that prevents coolant aeration, offering superior cooling capacity for consistent performance. * The intercooler pump is a high-flow Bosch PCE model, delivering reliable cooling to support long-lasting supercharger performance. * Every hose in this kit is custom-formed to ensure a clean installation and streamlined underhood appearance, making the system as easy to install as it is to admire. * The entire kit is engineered to fit beneath the stock Mustang hood and K-brace without any modification. The K-brace doesn't need to be removed, making installation simpler and preserving the structural integrity of your Mustang. * All wiring is plug-and-play, offering a smooth and straightforward installation process. * Colder heat range spark plugs with a reduced gap come pre-installed, ensuring optimal performance and durability under increased boost. * The kit is calibrated with Roush's Diagnostic Tuning Software, delivering best-in-class performance while maintaining seamless diagnostic capabilities. This software ensures the kit runs smoothly while adhering to Roush's high standards. * Developed in partnership with Magnuson, a company with over 50 years of supercharging experience, this kit brings together Roush's and Magnuson's expertise for a product that excels in performance, durability, and innovation.
Not Yet Reviewed
$9,995.00
$9,495.25
ProCharger P-1X high-output supercharger head units feature the robust, self-contained gearcase that is standard on most ProCharger models, but with a new aerodynamic compressor design. They create cooler-charge air temperatures and more horsepower at the same boost level and step-up ratio as their industry-standard supercharger kits (P-1SC-1 and D-1SC). This higher efficiency design is engineered to be a bolt-in replacement for both of those—they fit in the same brackets—and offers greater maximum-power potential. The compressor side of these superchargers (the volute and impeller) was redesigned with greater efficiency and less parasitic engine load in mind. This produces less heat and power needed to spin the impeller—and that adds up to more horsepower. Bolt-on some of the largest street-legal power gains available with a ProCharger P-1X high-output supercharger system. Additional features: * 10-15 flywheel horsepower gain on otherwise stock, modern V8 automotive engines at the same boost level and pulley size (versus P-1SC-1 models) * Larger gains possible at the same boost level with built and modified motors * 875-plus horsepower-capable * Designed for today's high-flowing modern V8 engines producing 300-plus naturally-aspirated horsepower * Available as optional upgrade with ProCharger systems and tuner kits * Highly-durable, high-horsepower designs with a compact, state-of-the-art 9.0 in. housing/volute * Available with standard or reduced-noise level * Slightly larger volutes than P-1SC-1/D-1SC models
Not Yet Reviewed
$8,909.00
Now you don't have to run a cumbersome roots-style supercharger on your vintage muscle. Vortech's carbureted centrifugal supercharger kits are designed to bring the performance and compact fit associated with late model fuel injected kits to vehicles equipped with carbureted engines. In most cases, these kits will fit under your stock hood without modifications. The heart of each kit is either a gear-driven V-1 S-Trim head unit or a gear-driven V-7 YSi-Trim head unit, unless otherwise noted. The cast aluminum carburetor enclosure assembly pressurizes the float bowls and throttle shafts for seamless response, and is designed for use with Holley 4150 or Demon 750 MD carburetors. The enclosure features front and rear -8 AN fuel inlet ports as well as provisions for pressure and vacuum connections. Linkage arms, a splined shaft, left/right hand spherical rod ends, and carburetor studs are included for simple throttle connection and adjustment. The included oil feed and oil drain assemblies deliver the best possible lubrication and cooling for the supercharger. They also feature a 6061-T6 billet aluminum supercharger crank pulley, pulley spacer, and an automatic belt tensioner.
( 1 )
$4,319.99
—
$5,828.99
Set your Viper apart from the rest with a NOVI-2000 Viper supercharger kit from Paxton. The heart of these kits is the legendary NOVI-2000 gear-driven centrifugal supercharger, which combines nearly silent operation with unmatched dependability. They feature an integrated air-to-water, dual-pass charge cooler, a stand-alone timing control computer, a high-flow race bypass valve for surge-free compressor operation, and heat-resistant silicon duct connecting sleeves with premium-quality stainless steel clamps. A complete fuel system upgrade includes dual high-flow fuel pumps, a fuel control unit, fuel lines, and a wiring harness for safe, reliable operation. The included oil feed and oil drain assemblies deliver the best possible lubrication and cooling for the supercharger, even under sustained boost conditions. The supercharger drive systems include a tensioner and all of the necessary belts and pulleys, along with OEM-type cast aluminum mounting bracketry that securely mounts the units for a "factory-installed" appearance and rigid attachment. As if all of this isn't enough, the kits are compatible with factory OBD II engine management systems, are 50-state emissions legal, and include a reusable high-flow air filter. It's easy to see why Paxton has been a supercharging tradition for more than four decades.
Not Yet Reviewed
$12,943.99
AWE Tuning Performance intercoolers are 37 percent larger than stock. The high-flow bar and plate style aluminum units have resulted in intake temperatures reduced by up to 55 degrees F and improved drop pressure resistance through the core. If your engine runs hot, tackle the high intake air temps with a Performance intercooler. Drivers have experience double-digit gains in horsepower and torque! Order the model recommended for your vehicle. Additional product details: * Forced induction * Perfect fitment, guaranteed * No cutting or grinding of car or brackets * Some models include silicon intercooler pipe * Mounting brackets included * Fits securely behind stock crash bar
Not Yet Reviewed
$925.00
—
$2,065.00
Fleece Performance Cheetah Holset turbochargers are 100 percent drop-in, bolt-on, and enjoy big top-end power units. These turbos provide quick and smooth throttle response, lower EGT's, and stock-like spooling with 40 to 45 psi operating range. They use a high-flow turbine wheel and Fleece's 63mm billet compressor wheel in order to support up to 650 rwhp. Give your diesel truck the kind of bolt-on performance most vehicles only dream of—with Fleece Performance Cheetah Holset turbochargers!
( 3 )
$4,499.00
BD Diesel 6.7L Powerstroke Stage 2 retrofit turbochargers allow you to bid goodbye to the petite and problematic GT32 SSTs of the early model Fords. These complete turbocharger solutions utilize modern turbo technology to deliver up to 81 lb. per minute of increased airflow without compromising on low-end response, and boost pressure can be increased to improve horsepower potential. Everything you require is included to drop in the new in place of the old unit, no extra pieces needed. Features: * Replaced with larger GT37 model, solve the common Ford Single Sequential Turbocharger (SST) failure * 64 mm billet compressor wheel * Custom mixed flow turbine (MFT) wheel with 65 mm exducer * More boost, lower drive pressure, and lower EGTs * Kit includes a BD custom cast turbine housing, backing plate, compressor cover, and pedestal * Please note: BD Diesel Stage 2 retrofit turbochargers will require a tuner to ensure no faults codes are set
Not Yet Reviewed
$4,798.00
BD Diesel 6.7L Powerstroke Stage 1 retrofit turbochargers allow you to bid goodbye to the petite and problematic GT32 SSTs of the early model Fords. These complete turbocharger solutions utilize modern turbo technology to deliver up to 66 lb. per minute of increased airflow without compromising on low-end response. Everything you require is included to drop in the new in place of the old unit, no extra pieces needed. Features: * Replaced with larger GT37 model, solve the common Ford Single Sequential Turbocharger (SST) failure * 61 mm single-sided compressor wheel * Mixed flow turbine (MFT) wheel with 62 mm exducer * VSR high-speed balanced * Kit includes a BD custom cast turbine housing, backing plate, compressor cover, and pedestal * Please note: BD Diesel Stage 1 retrofit turbochargers will require a tuner to ensure no faults codes are set
Not Yet Reviewed
$4,683.00
Wagner Tuning EVO III Competition intercoolers outfit your vehicle with a better design, more airflow, and increased performance. The EVO III units provide additional frontal area and volume compared to their first generation models. Wagner Tuning enlarged the frontal area and raised the efficiency even more to work flawlessly with the improved end tank designs. The result is unrestricted flow and increased charge cooling properties. These Competition intercoolers are engineered with some of the highest quality and lowest weight tube and fin cores available. The inside turbulators and free-form cast aluminum end tanks are optimized by CAD for the best possible internal airflow. In addition, the Competition intercoolers are finished with an anti-corrosion protective coating with perfect heat-dissipating properties. Experience the ultimate performance upgrade with the EVO III Competition intercoolers by Wagner Tuning.
Not Yet Reviewed
$1,590.00
Wagner Tuning EVO II Competition intercoolers outfit your vehicle with a better design, more airflow, and increased performance. The EVO II units provide additional frontal area and volume compared to their first generation models. Wagner Tuning enlarged the frontal area and raised the efficiency even more to work flawlessly with the improved end tank designs. The result is unrestricted flow and increased charge cooling properties. Competition intercoolers are engineered with some of the highest quality and lowest weight tube and fin cores available. The inside turbulators and free-form cast aluminum end tanks are optimized by CAD for the best possible internal airflow. Wagner Tuning EVO II Competition intercoolers are finished with an anti-corrosion protective coating with perfect heat-dissipating properties. Order the model for your application.
Not Yet Reviewed
$1,600.00
—
$3,440.00
On Sale
Mishimoto Z-Line intercoolers provide the perfect cooling capacity needed for larger turbocharged engine applications. These sleek and stylish front-mount units feature durable bar-and-plate cores that provide superior heat transfer and effectively reduce air intake temperatures. Mishimoto Z-Line intercoolers are constructed of powdercoated 6061 aluminum, provide a fin pitch of 15 fins/in., are rated to 22 psi., and are designed with slimmer 2.5 in. cores and 2.5 in. inlets/outlets to flow 1,250 cfm. Additional features: * Robust, one-piece, cast aluminum end tanks withstand high-boost pressures * Six threaded universal mounting points * Constructed with 6061 aluminum * TIG-welded for increased strength and durability * Mishimoto Lifetime Warranty * Available in silver, black, or gold * Note: For your taste, only one side of the intercooler has the Mishimoto logo
( 8 )
$739.95
$665.96
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
