Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
148 Results Found For "front"
Heidts 1970-74 Mopar Challenger and Barracuda PRO-G Independent Front Suspension Kits
Heidts 1970-74 Mopar Challenger and Barracuda PRO-G independent front suspension kits are a comprehensive, bolt-in upgrade designed to replace the stock factory torsion bar suspension with a modern, high-performance, double A-arm front suspension system. Specifically engineered for 1970-1974 E-body vehicles, these kits improve handling and cornering using adjustable coilovers, rack-and-pinion steering, and Wilwood brakes. Key features: * Complete system: Hub-to-hub kit includes a new crossmember, tubular control arms, spindles, and power rack-and-pinion steering * Performance upgrades: Features QA1 adjustable coilover shocks and springs for height and ride tuning * Improved geometry: Designed to eliminate bump steer and allow for significant caster and camber adjustments * Braking: Comes standard with 11 in. Wilwood rotors and 4-piston calipers * Engine fitment: Accommodates Mopar small block, big block, and Gen 3 Hemi engines, usually requiring a rear-sump oil pan * The kit is tailored to bring modern handling capabilities to classic Mopar muscle cars, reducing unsprung weight and increasing overall torsional rigidity
Not Yet Reviewed
$7,623.00
Heidts Mustang II Front Suspension Kits
Get your street rod up and rolling and improve your vehicle's suspension, handling, and performance with one of these Heidts Mustang II front suspension kits. Kits include: * Crossmember * Tubular upper and lower full A-frame style control arms * 11 in. diameter brake rotors * Bearings * Seals * Shocks * Springs * Stock-type spindles * Manual rack and pinion mounted to the front of the crossmember for additional engine clearance * Outer tie rod ends * Rubber spring cushions * Spindle nuts * All necessary mounting hardware
( 5 )
$2,700.00
Heidts Superide II Independent Front Suspension Kits
Enjoy driving your fat-fendered cruiser with the smooth ride and handling of independent suspension. Heidts Superide II independent front suspension kits utilize a Mustang II spindle to allow for a front mount rack and pinion unit, making engine installation much easier. The upper control arms use threaded adjusters for the wheel alignment. Unlike eccentric adjusters, they will never slip or lose alignment when hitting bumps in the road. Dozens of packages are available for applications from 1935 and up. Components include: * Heidts 3-piece crossmember * Mustang II stock spindles * Tubular upper and lower control arms * Front disc brake kit with 11 in. diameter brake rotors and 4-piston brake calipers * Manual rack and pinion steering, front mounted * Billet single adjustable coilover shocks with silver powdercoated springs
( 1 )
$5,317.00
—
$5,854.00
Heidts 1962-67 Nova Superide II Independent Front Suspension Kits
Enjoy driving your fat-fendered cruiser with the smooth ride and handling of independent suspension. Heidts Superide II independent front suspension kits utilize a Mustang II spindle to allow for a front mount rack and pinion unit, making engine installation much easier. The upper control arms use threaded adjusters for the wheel alignment. Unlike eccentric adjusters, they will never slip or lose alignment when hitting bumps in the road. Dozens of packages are available for applications from 1935 and up. Components include: * Heidts 3-piece crossmember * Mustang II stock spindles * Tubular upper and lower control arms * Front disc brake kit with 11 in. diameter brake rotors and 4-piston brake calipers * Manual rack and pinion steering, front mounted * Billet single adjustable coilover shocks with silver powdercoated springs
Not Yet Reviewed
$6,154.00
Heidts Superide Independent Front Suspension Kits
Independent front suspension gives you twice the ride of a new 4-link dropped axle at a comparable cost. These Heidts Superide independent front suspension packages have been engineered for a correct, safe ride, while providing the ultimate stance. They feature a one-piece crossmember with upper control arms that clear the fenders, and their 56 in. hub-to-hub tread width gives you the narrow look without any tire-to-fender clearance problems. The packages include specially designed one-piece 1045 heat-treated alloy steel spindles to give you the lowest possible ride available, the high-tech appearance you want, and assurance of the right geometry, right fit, and a great ride. Nearly a hundred packages are available to fit applications from the 1920s and up. Components include: * Heidts one-piece crossmember * Superide spindles * Tubular upper and lower control arms * Front disc brake kit with 11 in. diameter brake rotors and 4-piston brake calipers * Manual rack and pinion steering, rear mounted * Billet single adjustable coilover shocks with silver powdercoated springs
Not Yet Reviewed
$5,213.00
—
$6,154.00
Classic Performance IFS Front Suspension Packages
Classic Performance IFS front suspension packages are designed to convert the entire front suspension of your classic car. You can now enjoy the smooth ride and handling of independent suspension, while lowering the ride height of your vehicle. Order the package recommended for your vintage application. Features include: * New crossmember * Tubular upper and lower control arms with polyurethane bushings * Manual rack and pinion with tie rod ends * Coil springs (some kits may include adjustable billet coilovers with springs) * Heavy-duty forged steel spindles * Brake calipers and rotors
( 7 )
$1,920.99
—
$2,299.99
Pete and Jake's Newstalgia Front-End Kits
Pete and Jake's Newstalgia front-end kits are complete Gasser-style, parallel leaf front-end packages. These kits will add that nostalgia look to a variety of different applications. Items included: * 3 in. drop or straight tube axle (42 in. through 49 in. king pin to king pin) * Parallel spring kit; shackles, bushing, hardware, and brackets * Super Bell spindles, bushed with king pins * Super Bell's basic brake kit (5 in. x 4 1/2 in. or 3/4 in. bolt patterns--upgrades available) * Tie rod kit with tie rod ends * Drag link kit with tie rod ends * Spindle stop nuts * Spring clamps * Spindle nut and keyed washer kit * Shock kit, brackets, and hardware * Vega plate * Vega box * Pitman arm
Not Yet Reviewed
$2,737.99
Heidts Nova Subframe/Crossmember Suspension Packages
You're low ridin' and lookin' good with Heidts Nova subframe/crossmember suspension packages. Your Chevy Nova will have a lower stance and the superior handling that street rods have enjoyed for some time. Heidts suspension packages make it easy to get that timeless look. Packages include: * Heidts front subframe * Tubular upper and lower arms * Stock spindles * 11 in. rotors with single-piston calipers * Manual rack and pinion steering * Stock shocks and springs
Not Yet Reviewed
$4,247.00
Speedtech Performance USA ExtReme Front Suspension Packages
Upgrade your front suspension with the Speedtech Performance USA ExtReme subframe featuring forged spindles. These packages are designed to handle all driving conditions with ease—ideal for daily driving, autocross, and track days. The box welded construction and tabbed through frame gusseting provide added torsional rigidity, while the fully adjustable wheel alignment and corrected Ackerman for better grip during cornering facilitate a customizable driving experience. The kit includes custom designed upper and lower control arms, a durable Sweet Mfg. dual power rack and pinion steering, QA1 custom valved single adjustable coilover shocks, and a splined front sway bar with spring rate options. The exclusive ExtReme forged spindles offer optimized geometry and improved KPI/SAI angles, providing increased tire grip and a more precise driving experience. Order the front suspension package recommended for your vehicle. ExtReme Front Subframe Includes: * Full ExtReme subframe * Custom designed upper and lower control arms with high clearance to accommodate wide wheels * Durable Sweet Mfg. dual power rack and pinion steering * QA1 custom valved single adjustable coil over shocks, spring rates of your choice included * Tuned, adjustable, splined front sway bar with spring rate options for street, pro-touring/auto cross and road course * Exclusive ExtReme forged spindles with C7 hubs and maintenance free sealed bearing * Fully adjustable transmission crossmember that will accommodate all engine and transmission combinations ExtReme Front Subframe Features and Benefits: * Boxed construction welded with tabbed through frame and crossmembers for added torsion rigidity * Speedtech Performance chassis and subframes come exclusively with forged 7075 aluminum ExtReme spindles * 78 percent motion ratio for faster shock response and more precise control * Increased shock length providing more suspension travel * Virtually zero bump steer, .005" over the full travel of the system * 30 +/- 3 degree of steering angle * Exclusive system provides optimum Ackerman for up to 20 percent more inside tire grip when cornering * Industry exclusive optimized roll center for low, mid and high travel * 3-piece chromoly tubular splined sway bar standard, optional spring rates * Excellent system for street, autocross and track days * Ride heights to meet your vision for styling the car exactly the way you want it * Accommodates greater than 315/30/18 tire with full steering ExtReme Forged Spindle Features: * Forged from 7075 aircraft-grade aluminum * Optimized geometry unmatched in any other Corvette style spindle * Significantly improved KPI/SAI angle * Requires less caster to achieve maximum tire contact patch * Significantly reduced scrub radius * Billet steering arm provides increased Ackerman angle * Achieves optimum tire slip-angles, increasing front tire grip * Maintains optimum tire grip with less backspaced wheels * Brake caliper bolt pattern is direct carryover from Corvette C5 and C6, opening up many options * Comes standard with a maintenance-free factory GM Corvette C7 hub and sealed bearing * From parking lots to tracks, it simply drives and turns better
Not Yet Reviewed
$9,968.00
Strange Medium Duty 2-Piston Forged Aluminum Strut Packages
These Strange medium-duty 2-piston forged aluminum strut packages will give your race car the consistency you need. They are recommended for vehicles under 2,600 lbs. and are designed for drag racing only. The packages include the following: * Strange medium-duty 2-piston calipers with brake pads * Strange 11.250 in. slotted forged steel rotors * chromoly lower control arm kit * Strange adjustable forged aluminum struts * Hypercoil springs * Spring seat bearing kit A specification sheet must be filled out prior to ordering. The bolt pattern, lower control arm rod end diameter, and coilover spring rate are needed for your application. Please call us at 1-800-230-3030 for further information.
( 1 )
$2,169.99
—
$2,489.99
Strange Heavy Duty 4-Piston Forged Aluminum Strut Packages
These Strange heavy-duty 4-piston forged aluminum strut packages will give your race car the consistency you need. They are recommended for vehicles over 2,600 lbs. and are designed for drag racing only. The packages include the following: * Strange heavy-duty 4-piston calipers with brake pads * Strange 11.250 in. slotted forged steel rotors * chromoly lower control arm kit * Strange adjustable forged aluminum struts * Hypercoil springs * Spring seat bearing kit A specification sheet must be filled out prior to ordering. The bolt pattern, lower control arm rod end diameter, and coilover spring rate are needed for your application. Please call us at 1-800-230-3030 for further information.
( 2 )
$2,349.99
—
$2,614.99
Pete and Jake's Super Bell Beam Axles
Pete and Jake's Super Bell beam axles provide up to four inches of drop for the front-end of your vintage hot rod. They're cast from 65-45-12 ductile iron for optimum tensile strength and good machinability (should you desire your own modifications or lightweight aluminum). Potential applications include 1928-34 Fords, 1/2-ton Ford pickup trucks up through 1941, and 1935-36 Fords if you split the original wishbones. They accept 1937-48 Ford passenger car spindles. These axles are offered in multiple sizes with a variety of classic features. Get modern performance and that archetypal hot rod look with Pete and Jake's Super Bell beam axles! Offered mix-and-match features: * Drilled for lighter weight/bold look * Filled ends for more strength/beefier look * Chrome finish for a polished look
( 8 )
$568.99
—
$1,236.99
Scott's Hot Rods IFS Packages
Scott's Hot Rods IFS packages are the ultimate improvement to the ride quality and handling of your classic vehicle. Starting with a ground-up, clean-sheet design, these independent front suspension kits are custom-fit to your specific chassis. Optimized steering and suspension geometry provide modern handling, while adding the convenience and feedback of rack-and-pinion steering. Designed and fabricated in-house ensures precise, accurate fitment. These IFS packages are available in a wide array of ride heights, suspension options, brake configurations, and even wheel bolt patterns! Features include: * Stock, mild, or low ride height configurations * One-piece, boxed steel crossmember construction * Frame/chassis-specific frame notches and reinforcement plates * Fully adjustable, tubular upper and lower control arms * Oversized serviceable ball joints * Built-in anti-dive geometry * Rack and pinion steering * Forged steel spindles (stock or drop-height options) * Available with Wilwood brake packages in multiple color choices * Available air bag and multi-level coilover suspension options
( 4 )
$3,386.99
—
$5,398.99
Strange Lightweight Single Piston Aluminum Strut Packages
These Strange lightweight single-piston aluminum strut packages will give your race car the consistency you need. They are recommended for vehicles under 2,400 lbs. and are designed for drag racing only. The packages include the following: * Strange spindle mount brake kit * chromoly lower control arm kit * Strange externally adjustable forged aluminum struts * Hypercoil springs * Spring seat bearing kit A specification sheet must be filled out prior to ordering. The bolt pattern, lower control arm rod end diameter, and coilover spring rate are needed for your application. Please call us at 1-800-230-3030 for further information.
Not Yet Reviewed
$1,994.99
Strange GT Struts
Strange Engineering, with help from F.J. Smith Race Cars, has developed a strut package that meets the NHRA's criteria. These Strange GT struts are extremely versatile drag racing strut systems. They are offered in a variety of custom dimensions, custom valving, and custom stroke configurations. As an added special feature, all struts are available with the double adjustable option so that you can select compression and rebound settings independent of one another.
Not Yet Reviewed
$2,974.99
iDEAL Equipment Open Front Paint Spray Booths
iDEAL 'A-Frame' Open Front Paint Spray Booths are economic, commercial-grade open front units designed to provide optimal 'airflow' with superior lighting for high-quality spray painting and finishing applications. They're a great solution for industrial batch-type and automated production-type finishing systems. Air flows through the open front section of the booth, then passes through the work area toward the rear of booth into the filtered exhaust chamber. Filtered exhaust air is then drawn through the exhaust plenum and discharged upward through the exhaust fan and ducting. The booths are easily installed with heavy-duty, precision-punched 18-gauge panels, allowing for quick nut and bolt assembly. Each booth is standard with a bright white powdercoat finish, deluxe control panel, premium exhaust filters, hinged glass light fixtures, and high-quality tube-axial exhaust fan. Features and specs: * Commercial-grade design for optimal airflow and lighting coverage * Deluxe control panel included * White powdercoat panel finish (inside and outside) * Heavy-duty, precision-punched 18-gauge panel construction * Convenient 5/16 in. bolt and serrated lock nut assembly * UL Listed Dayton 24 in. tube-axial exhaust fan with spark-resistant fan blades * NEMA rated 2 hp, 3 phase, 230/460 V AC 60hz motor standard * Premium AFC exhaust filters * LDPI industrial light fixtures with inside access hinged glass door * (2) LPDI industrial (CLS1 / Div. 2) light fixtures – UL and ETL (Groups A, B, C, and D) * True 'daylight color' with GE T8 48 in. fluorescent lamps 32 watts, 2900 lumens, 5000K * Optimal airflow with CFM 7,983 at .5 static pressure * Inside dimensions: 13 ft. wide x 8 ft. 6 in. high x 7 ft. 6 in. deep * All assembly hardware, manometer, and sealant included * Meets or exceeds all applicable OSHA and HFPA 33 regulations * Easy to install, operate, and maintain
Not Yet Reviewed
$9,050.00
Classic Performance Complete Front and Rear Disc Brake Kits
Classic Performance complete front and rear disc brake kits are designed as direct bolt-on applications. They include front rotors and calipers, a master cylinder, and rear rotors and calipers. The complete kits are available in different configurations to fit either stock or aftermarket drop spindles. Brake lines, a proportioning valve, and mounting hardware are also included to complete the installation. Improve your ride, braking, steering, and handling with Classic Performance complete front and rear disc brake kits.
( 21 )
$1,375.99
—
$1,611.99
Classic Performance Complete Front and Rear Big Brake Kits
Classic Performance Products introduces its complete line of front and rear big brake kits. The parts are of excellent OEM quality and a great option for strong braking, good looks, and great value. These are complete 4-wheel kits, with all the rotors, calipers, brake lines, brackets, cables, hoses, clips, hardware, and instructions for a hassle-free installation. Classic big brake kits require larger diameter disc brake type 16 in. wheels.
( 6 )
$1,704.99
Classic Performance Modular Drop Spindle Front Disc Brake Kits
Classic Performance modular drop spindle front disc brake kits feature an exclusive design that provides you with 1 1/8 in. more clearance at the fender and helps solve the tire-to-fender interference commonly found with lowered trucks. The spindle and brackets work with factory brake components. Depending on application, the kits may include spindles, front brake rotors, loaded calipers, caliper mounting brackets, bearings, seals, hoses, a spindle nut kit, mounting hardware, a brake booster and brackets, and a master cylinder and proportioning valve kit. Order the style and options preferred for your vehicle.
( 5 )
$891.99
—
$1,481.99
Classic Performance Front Disc Brake Kits
Upgrade your vehicle's stopping power with Classic Performance front disc brake kits. They include a pair of vented brake rotors and calipers, brake hoses, a bearing kit, seals, banjo bolts, and spindle nut kits. These kits are available with your choice of standard solid brake rotors or high performance cross-drilled and slotted rotors. Order the model designed for fitment with your vehicle and bolt pattern application.
( 42 )
$718.99
—
$768.99
GSI Machine and Fabrication Air Ride Bolt-On Front Suspension Kits
GSI Machine and Fabrication offers Air Ride bolt-on front suspension kits for a variety of applications—including many 1960s and '70s era Chevrolet trucks. These 100 percent bolt-in front crossmember kits include all the necessary components to replace your old worn-out suspension with new, modern air ride. Custom-designed tie rod adapters require no modification to the spindle; while narrowed track width facilitates driving and turning low. Wheel position has been moved forward 1 in. to center the wheel in the wheel opening; and upgraded steering powers rack and pinion. Kits are designed to use "clamshell" style motor mounts with a GM 350 engine; LS, LT, and big block engines are compatible with the use of GSI motor mount adapters (available separately). Everything has been carefully planned and designed to obtain the best drivability and easiest installation possible. Notes: * When installing an LS-based engine, the use of an F-body style oil pan is required * The rack and pinion unit is a late '80s Mustang-style with a 3/4-36 spline * Removal of inner fender well is required * Power steering hoses and fittings can be found at most speed shops or online retailers * Recommended wheel specs: 8.5 in. wide with 5.5 in. backspace or 9 in. wide with 6.0 in. backspace * Misc steering parts such as U-joints and shafts are not included * Designed around 71/72 C10 spindles, making this front end compatible with several brake kits Key features: * Re-engineered suspension and steering geometry * Raised crossmember for increased ground clearance * 61 in. track width * 8.5 in. adjustable suspension lift * Built-in limit stops * Updated steering to power rack and pinion unit * Easy alignment with eccentric cams at all four lower control arm pivots * Designed to lay frame when using up to a 30 in. tall tire
Not Yet Reviewed
$4,499.99
Classic Performance Front Coilover Conversion Kits
Classic Performance front coilover conversion kits can help drop your ride from just below stock height to several inches lower. The included shocks are double adjustable coilover models so you can pinpoint the type of ride you want. These kits provide lower control arms featuring either a silver or black powdercoat finish, depending on application; upper control arms are included with most kits, along with mounting hardware. Convert your vehicle into a low-riding road-hugger with a Classic Performance front coilover conversion. Order the kit designed to fit your application.
Not Yet Reviewed
$1,806.99
Wilwood Forged Dynalite Big Brake Front Brake Kits
With Wilwood Forged Dynalite Big Brake front brake kits, you'll be ready for show, street, or strip! Track-ready performance and high-tech style come with oversized rotors, forged billet Dynalite calipers, and high performance Wilwood SmartPads. These front brake kits are fully compatible with OE master cylinder output. Options for the caliper finish and rotor design make it simple to match the brake response and style preferences on all types of daily drivers, race vehicles, and ultra-styled show machines! The choice is yours for big stopping power--choose Wilwood Forged Dynalite Big Brake front brake kits.
( 134 )
$1,222.78
Trail-Gear Trail-Creeper Dual Transfer Cases
Trail-Gear Trail-Creeper dual transfer cases will give you ultimate gear selection and greatly increase the oil flowing in and around the adapter for cooler operation. They have increased the strength of the casting by making thicker walls and creating huge, oversized gussets. The special retainer ring securely stabilizes the main bearing to prevent bearing play, and the tight tolerances on the coupler ensure long life and prevent striped-out input gears. You won't regret this mod--it's easy to install with basic tools and mechanical abilities.
( 1 )
$3,699.99
