Free Shipping on Orders Over $125 at Summit Racing

Heidts Pro-G Independent Rear Suspension Kits

Heidts Pro-G IRS suspension kits are designed to bring the superior ride and handling of independent rear suspension to your muscle car. Out-handle the competition and put all of that horsepower to the ground. Heidts Pro-G IRS suspension kits produce 1/2 degree of camber curve at 3/4 of bump, especially during very high cornering loads. Features include: * Cast iron Ford 9 in. center section mounted in an aluminum housing * 31-spline posi-traction hooked up to heavy-duty half shaft CV joint axle shafts * Tubular upper and lower control arms * Steel outer uprights * Top crossmember * Frame mounting brackets * Wilwood rear brake rotors and calipers * Billet aluminum single adjustable coilover shocks with silver powdercoated springs

Not Yet Reviewed

$7,893.00

—

$15,504.00

Vintage Air Gen-V SureFit Systems Complete Kits

Vintage Air Gen-V SureFit Systems complete kits are powerful and intelligent climate control systems. Available for vehicles with or without factory air, they use an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and-fin cooling coils provide outstanding performance and instant temperature adjustments. Vintage Air Gen-V SureFit Systems feature variable blower speed and dash/floor/defrost blend. They will include everything in an evaporator kit, plus all underhood components, such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware, and installation instructions. Additional features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection-molded case for optimal precision, strength, and quality * Injection-molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high performance blower * Bolt-in replacement control panel

4.5 out of 5 stars ( 10 )

$1,999.99

—

$2,943.99

On Sale

BendPak RJ9W Rolling Lift Bridge Jacks

BendPak's RJ9W is a rolling bridge jack with 9,000-lb. capacity which is ideal for use on the BendPak HDS-18E four-post lift, especially if your vehicles have an unbalanced center of gravity—which is generally associated with heavier trucks and SUVs. The RJ9W rolling bridge comes standard with easy-roll wheels that fit inside the runway channels on standard four-post lift models and provide effortless gliding along the runways for easy positioning and adjustability. The BendPak rolling bridge jack rollers are made of hardened stainless-steel and zinc plated for maximum durability. Rubber contact pads are essential lifting components and increase rise and firmly engage your vehicle's undercarriage lift points—durable, non-marring surface ensures vehicle is not scraped or damaged during rolling bridge jack or car lift operation. Additional product features and specs: * Stackable adapters—give you the ability to stack and unstack BendPak contact pads that increases the versatility of your rolling bridge jack and are also useful for lifting vehicles that may have drastically different front-and-rear suspensions (with two rolling bridge jacks employed at once, the front may need an extra adapter to ensure an even lift) * BendPak's rolling bridge jacks include a pneumatic-hydraulic power unit that comes attached to the jack—the car lift runs off its own power unit, so there's no "sharing" of hydraulic power between the two (an airline must be attached to the rolling bridge jack with 125 psi and 10–20 cfm) an easy foot pedal control is included for safety and convenience * Three lock levels—with three lock positions, your rolling bridge jack can be raised to the level most comfortable for you so you can find the perfect height for the perfect job as you also adjust the height of your car lift * Optional air-line kit available (sold separately)

Not Yet Reviewed

$4,295.00

$3,955.00

Distinctive Industries Touring II Seats

Distinctive Industries Touring II seats offer original appeal with a new level of comfort and stability. The Touring II seats begin with a bolstered steel frame, which is TIG-welded and electrostatically coated for strength and durability, and then covered with their high-quality foam--so the bolstered frame supports the bolstered foam, creating a strong base. Distinctive Industries has painstakingly patterned the seats to closely mimic the original upholstery's design and details to complement your existing original interior. The Touring IIs also feature 20-position reclining seat backs--a real solution to a problem that has existed with the original seats for decades. Distinctive Industries Touring II seats will fit your restoration with classic style covering a modern feel, support, and value.

2.0 out of 5 stars ( 1 )

$1,366.99

Classic Performance Front Disc Brake Kits

Upgrade your vehicle's stopping power with Classic Performance front disc brake kits. They include a pair of vented brake rotors and calipers, brake hoses, a bearing kit, seals, banjo bolts, and spindle nut kits. These kits are available with your choice of standard solid brake rotors or high performance cross-drilled and slotted rotors. Order the model designed for fitment with your vehicle and bolt pattern application.

3.98 out of 5 stars ( 42 )

$718.99

—

$768.99

Optic Armor Oversized Formed Windows

Optic Armor oversized formed windows are highly scratch and chemical-resistant while being 50 to 75 percent lighter than glass. They are made from high-optical grade polycarbonate, making them virtually shatterproof, providing added durability as well as safety for the driver or operator. Products requiring a screen printed border are printed with a high-quality, permanent ink that will not flake or crack and gives the window a professional touch. Optic Armor offers many vehicle applications in a formed to factory curvature and their oversized windows allow for a cut-to-fit, flush-to-body install that is not only aerodynamic, but gives the installer the ability to create a custom look. Optic armor windows can be cleaned with standard glass cleaner.

2.86 out of 5 stars ( 7 )

$231.12

—

$658.05

American Powertrain Tremec T-56 Magnum Manual Transmissions and Installation Kits

American Powertrain Tremec T-56 Magnum manual transmissions and installation kits are designed to withstand up to 700 lbs.-ft. of torque. Their gears feature substantially increased face widths and 2-piece laser-beam welded construction, allowing for greater control of the tooth angles, pitch, and alignment. The transmissions also include a bolstered one-piece countershaft to resist distortion, and a stronger input shaft. Magnum's new synchronizers are built with fine-tooth angles, redesigned shift forks—and an extensively modified transmission case to prevent leaks under high-stress conditions and increase overall power-handling capabilities. Nearly two dozen models are available; choose the kit recommended for your vehicle application. Kits include: * Cryo-hardened steel driveshaft slip yoke with 1330 style U-joint * Mechanical speedometer conversion * VSS wiring harness for electronic speedometer of EFI ECU * Reverse light wiring, weather seal harness, non-polar * Reverse lockout wiring harness * ISO-X ballistic, low-profile transmission mount * Steel roller pilot bearing * White shift knob with black 6-speed shift pattern

Not Yet Reviewed

$4,750.95

—

$5,025.95

FTI Performance Pro Powerglide Level 5.5 Transmissions

Delivering big power for racers, FTI Performance Pro Powerglide Level 5.5 transmissions are an unbreakable unit. Equipped with the FTI creatively designed spiral springs and valve body, these units don't creep when the brake is set—a must in today's racing world. With in-house machining, the transmissions are hand-assembled by one builder, and every clearance is set to exacting tolerances. FTI automatic transmissions house the greatest advances in Powerglide racing technology, and are designed to withstand the rigors of today's high performance engines in an extremely demanding environment. Other features include: * 2200 advertised horsepower rating * Protree transbrake 265 lbs. * Lightened steel clutch hub * 1.80 or 1.69 straight cut planetary * Vasco input shaft * 10-clutch drum * Pro mod wideband * High-flow pump * 300M output shaft

Not Yet Reviewed

$5,349.99

Ranger RS-750DS Parts Washers

The Ranger RS-750DS parts washers have a 53-gallon tank and come with the latest features for rapidly degreasing the biggest car parts around—making it the ultimate answer to degreasing car parts of any shape or size. Built to last, these stainless steel spray wash cabinets allow for more space to fit more parts in at a time. With the extra room, you can clean and degrease automotive parts faster than ever before! Features and specs: * 53-gallon tank with heavy-duty stainless steel construction and powdercoat finish to resist rust * Commercial-grade pump/motor combination provides washing power—made of high-quality parts like the rust-resistant stainless steel impellers—while the centrifugal pump does all the heavy lifting (a protective covering comprised of 100 percent ductile cast iron and silicon carbide seals keep the machinery inside safe and dry) * Wash cabinet is sealed with a leak-proof neoprene door—creates an edge-to-edge seal and prevents water and steam from escaping to create better water retention which improves cleaning efficiency * Heated cabinet with adjustable set point thermostat allows you to adjust the heating range up to 175 degrees F * Safety switch and timer dial for a functional machine that is both safe and efficient * A nickel-based, alloy-sheathed heater element is specifically designed for heated parts washing—ensures that your parts washer is hot and ready to go at the press of a button * Contamination-proof interior welds prevents even microscopic debris from getting into the recirculating tank to help ensure nozzles and pumps remain unclogged, redirecting unwanted debris to the trap and filter * Stainless steel nozzles are resistant to wear and clogging—sprayer nozzles have a sharply articulated spray grid to provide a powerful wash, blasting away dirt and grime * Full opening octagonal door and stainless steel handles * Dual water heaters for quick startup—water temperature is raised within seconds thanks to the dual water heaters that keep water primed and ready at all times * High-power spray jets clean parts fast—attacks dirt and grime from all angles, ensuring an even powerful wash * Automatic low water shutoff feature cuts the power when the water level gets too low, saving your dual heaters from any potential damage—switch is made from an industrial-grade stainless steel float located in the detergent tank that rises and falls with the water level * Stainless steel oil skimmer—separates oil and grime from the water which further increases the longevity of your detergent solution (oil is directed outside the cabinet into a holding container for disposal) * Removable tree rack and components basket is essential for small parts and for maximizing parts washing space, the tree rack installs and removes easily instantly extending tank space and provides space for smaller parts like bolts, nuts, and screws * Convenient tank drain pipes help you maintain your spray wash cabinet by preventing debris from accumulating on the bottom * Moveable filter basket traps any particle larger than 1/8 in., so you can be sure that your tank water remains free of any build up that could cause harm and can be easily removed to gain access to the cleansing tank for maintenance * Non-marring casters make maneuvering even this bulky piece of equipment a breeze and the urethane casters ensure that your floor remains safe * Convenient drain tank—large built-in pipe drains that redirect and remove sludge from the parts washer floor, which helps keep the washer clean and functioning smoothly * A friction-drive turntable is the system behind the parts washer, and it cuts out the risk of motor damage by preventing jams that might otherwise occur within the cabinet and tank

Not Yet Reviewed

$15,895.00

Ranger RS-500DS Parts Washers

The Ranger RS-500DS parts washers are designed with professional-grade features, including dual water heaters, adjustable thermostat, automatic low-water shut-off, stainless steel oil skimmer, and more to demonstrate Ranger's commitment to enhanced performance and productivity. These stainless-steel spray wash cabinets rapidly degrease all of the dirty parts in your garage or shop. From larger truck and SUV engine components, to even your smallest nuts and bolts, the Ranger RS-500DS spray wash cabinets will make your car parts shine like new! Features and specifications: * 50-gallon tank with heavy-duty stainless steel construction * Powdercoat finish specifically designed to resist rust * Neoprene-sealed wash cabinet is sealed with a leak-proof neoprene door that creates an edge-to-edge seal and prevents water and steam from escaping—keeping steam inside creates a better water retention which improves cleaning efficiency * Centrifugal commercial-grade pump/motor combination—made of high-quality parts like the rust-resistant stainless steel impellers and screw nuts (pump and motor is over-designed to last) * Contamination-proof interior welds cover the full perimeter of the inside of the spray wash cabinet, perfectly sealing the wash are from the detergent tank, and preventing any potential cross contamination that could potentially cause clogging is redirected and filtered out, eliminating downtime, and helping to make maintenance a breeze * Heated cabinet with adjustable set point thermostat allows you to adjust the heating range up to 180 degrees F * Hot cleaning—a nickel-based, alloy-sheathed heater element is specifically designed for heated parts washing—ensures that your parts washer is hot and ready to go at the press of a button * High-power spray jets clean parts fast—attacks dirt and grime from all angles, ensuring an even powerful wash * Stainless steel nozzles are resistant to wear and clogging—sprayer nozzles have a sharply articulated spray grid to provide a powerful wash, blasting away dirt and grime * Full opening octagonal door and stainless steel handles * Dual water heaters for quick startup—water temperature is raised within seconds thanks to the dual water heaters that keep water primed and ready at all times * Automatic low water shutoff—switch is made from an industrial-grade stainless steel float located in the detergent tank that rises and falls with the water level * Stainless steel oil skimmer—separates oil and grime from the water which further increases the longevity of your detergent solution (oil is directed outside the cabinet into a holding container for disposal) * Removable parts tree and components basket is ideal for smaller cleaning components—instantly expands cabinet space and makes cleaning nuts, bolts, and screws as easy as placing them in the basket * Removable tank screen makes monthly maintenance easy, keeping your parts washer clean and ready to go * Moveable filter basket traps any particle larger than 1/8 in., so you can be sure that your tank water remains free of any build up that could cause harm * Heavy-duty non-marring casters are impervious to harsh conditions and roll smoothly without leaving any marks behind—the casters provide easy movement, giving you the freedom to reposition your parts washer anywhere with ease and have an easy lock and release system that allows you to place your parts washer anywhere in the garage or shop * Convenient drain tank—large built-in pipe drains that redirect and remove sludge from the parts washer floor, which helps keep the washer clean and functioning smoothly * Friction-drive turntable system provides the power behind the parts washer which helps to eliminate potential motor damage by reducing the risk of jamming components

Not Yet Reviewed

$14,895.00

Harwood Lexan Windows

Harwood Lexan windows are designed to replace your factory glass windows. They are available in standard Lexan or Margard and come in different thicknesses for multiple street or race applications.

3.96 out of 5 stars ( 27 )

$262.99

—

$471.99

Ranger RL-8500XLT Brake Lathes

Ranger RL-8500XLT brake lathes feature an extended capacity spindle and can turn a drum that's up to 10 in. deep. The longer spindle and the relocated rear bushing provide the arbor with enough support to handle your heaviest drums, rotors, and flywheels. Durably crafted, RL-8500XLT brake lathes resurface brakes quicker and more precisely than any other lathing unit on the market today. They feature unlimited feed rate settings, allowing the user to modify resurfacing rates with an easy turn of the dial. Now you can decrease or amplify the cut duration for the perfect finish, whether you're rushing through the first rough cut or performing a single-pass micro-finish. Features include: * RL-8500XLT uses precision electric DC servo motors designed to meet the demanding requirements of industrial motion control * Quick-Change Adapter-Plus system with built-in springs eliminates the need for conventional bell clamps and cones * Works on all cars or trucks, both foreign and domestic, with hubless drums, rotors (center hole sized 2 5/32 in. to 4 in.) and composite rotors (center hole sized 4 in. to 6 1/4 in.) * Precision twin cutter tools and a quick drum-to-rotor changeover

Not Yet Reviewed

$13,095.00

Hughes Performance Muscle Car Transmission Packages

Hughes Performance Muscle car transmission packages are designed and built to give customers the option to choose the transmission and converter package best suited for their needs. The transmission packages come complete with everything you need—transmission, converter, transmission cooler, transmission fluid, and more. So, whether you have a radical cam in your hot rod, or need to haul or tow a heavy load, Hughes Performance offers high-quality transmission packages to match your application needs. Note: Contents of kits vary based on transmission type and your vehicle.

5.0 out of 5 stars ( 1 )

$4,134.99

—

$5,061.99

UnderCover Elite LX Tonneau Covers

UnderCover Elite LX tonneaus are the premier choice in hard, one-piece truck bed covers--engineered to amaze, and now with a factory paint finish to match your truck! These ABS composite shells are lightweight, strong, and weather-tight. The covers offer a precise fit and OE-style look, and they can be easily installed or removed using quick-release hardware (no tools are required). Elite LX tonneau covers include a premium carpet headliner on the underside, a removable light, an OE handle and lock design, and a handy lanyard tool to reach your cargo. It's everything you could ask for in a secure truck bed covering. UnderCover Elite LX tonneau covers are available for a variety of makes and models. Order the unit custom-tailored for your application.

5.0 out of 5 stars ( 2 )

$2,349.99

—

$2,449.99

UnderCover LUX SE Tonneau Covers

UnderCover LUX tonneau covers lift smoothly and close easily with their strong nylon pull strap, which is fantastic for taller trucks! A single, easy-to-operate, low-profile twist lock in the center of the covers operates the latches on both sides of the truck bed. This inventive design offers the same level of security with a more streamlined look. Tonneaus are available for a wide range of trucks from the early 2000s and up. Features include: * Painted to match the factory color of your truck; over 90 shades available * Provide secure, full-perimeter, weather-tight seal * Completely concealed hinges * No-tools-needed removal * Self-contained LED light illuminates your truck bed with no wiring needed

2.0 out of 5 stars ( 1 )

$2,249.99

—

$2,349.99

WeatherTech DigitalFit FloorLiners

Get absolute interior protection with WeatherTech DigitalFit FloorLiners! These thermoplastic protective coverings are designed using precise digital laser measurements of interior surfaces—ensuring a consistently perfect fit. Choose the floor position and color to complement your vehicle. WeatherTech DigitalFit FloorLiners feature: * Lines interior carpet of footwell up front, back, and sides * High-density, tri-extruded material core for incredible strength with a tactile feel * Grippy underside provides surface friction to reduce movement * Special channels carry fluid and debris to a lower reservoir for minimal fluid movement while driving * Once fluids are trapped in the reservoir, away from shoes and clothing, they are easily removed over the door sill * Designed for vehicles with OE carpet--will not fit vehicles with vinyl floors unless otherwise specified * Please take your old floor mats out before installing your new WeatherTech DigitalFit FloorLiners

4.61 out of 5 stars ( 1107 )

$83.95

BendPak LR-1000 Low-Rise Lifts

BendPak LR-1000 low-rise lifts are your solution for quick maintenance and increased productivity when servicing today's passenger cars and light trucks. From tire and brake service … to vehicle detailing and body repair, these lifts will facilitate your work on a wide variety of vehicles. Additional facts and specs: * Low-profile height that accommodates most vehicles, including sports cars, race cars, and larger trucks and SUVs * Single-point safety release make this lift easy to operate and very safe to use * Dropped crossbar in the center provides added vehicle drive-over clearance. Suspension work, oil changes, wheel and brake service, and detailing are easier than ever * Industrial-grade hydraulic cylinder * Solid rubber lift blocks

Not Yet Reviewed

$5,495.00

Zumbrota Remanufactured Transfer Cases

Zumbrota remanufactured transfer cases are put through a proprietary cleaning method, and arrive looking like new. But before they ship, each unit goes through complete inspection, component replacement, and quality control process to assure dependable, reliable shift-ability. Zumbrota rebuilds units from New Process, Borg Warner, and other major manufacturers to fill fitments for foreign and domestic passenger cars, trucks, and SUVs. Benefits of Zumbrota remanufactured transfer cases include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All cases are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent replacement of seals, bearings, viscous couplers (when applicable), and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty

3.86 out of 5 stars ( 7 )

$1,032.99

—

$3,852.99

Zumbrota Remanufactured Axle Assemblies

Zumbrota Drivetrain remanufactured axle assembles offer reliable performance at a value price. They're available for thousands of applications—from passenger and off-road vehicles, to race cars and pulling trucks. The axle tubes are straightened to OE specifications; the housings are hydro-blasted and rinsed, then tested for surface wear and cracks; and the gear patterns and rolling torque are properly adjusted to ensure optimum tooth contact. Zumbrota replaces all seals, bearings, crush sleeves, pinion nuts, and shims on the front and/or rear axle assemblies. Order the replacement model recommended for your specific vehicle.

4.0 out of 5 stars ( 9 )

$944.99

—

$6,066.99

Zumbrota Remanufactured Manual Transmissions

Zumbrota remanufactured manual transmissions are some of the most dependable 5-speed, 6-speed, and transaxle units available. Each transmission is put through tremendous testing and inspections to assure the highest quality possible to use in your vehicle. Benefits of Zumbrota remanufactured manual transmissions include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All housing and top covers are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent inspection of internal parts, including gear wear checks, main shaft straightness test and synchronizer testing * 100 percent replacement of seals, bearings, and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty

3.68 out of 5 stars ( 22 )

$1,177.99

—

$7,574.99

Heidts Mustang II Front Suspension Kits

Get your street rod up and rolling and improve your vehicle's suspension, handling, and performance with one of these Heidts Mustang II front suspension kits. Kits include: * Crossmember * Tubular upper and lower full A-frame style control arms * 11 in. diameter brake rotors * Bearings * Seals * Shocks * Springs * Stock-type spindles * Manual rack and pinion mounted to the front of the crossmember for additional engine clearance * Outer tie rod ends * Rubber spring cushions * Spindle nuts * All necessary mounting hardware

5.0 out of 5 stars ( 6 )

$2,700.00

—

$2,700.99

Heidts Superide Independent Front Suspension Kits

Independent front suspension gives you twice the ride of a new 4-link dropped axle at a comparable cost. These Heidts Superide independent front suspension packages have been engineered for a correct, safe ride, while providing the ultimate stance. They feature a one-piece crossmember with upper control arms that clear the fenders, and their 56 in. hub-to-hub tread width gives you the narrow look without any tire-to-fender clearance problems. The packages include specially designed one-piece 1045 heat-treated alloy steel spindles to give you the lowest possible ride available, the high-tech appearance you want, and assurance of the right geometry, right fit, and a great ride. Nearly a hundred packages are available to fit applications from the 1920s and up. Components include: * Heidts one-piece crossmember * Superide spindles * Tubular upper and lower control arms * Front disc brake kit with 11 in. diameter brake rotors and 4-piston brake calipers * Manual rack and pinion steering, rear mounted * Billet single adjustable coilover shocks with silver powdercoated springs

Not Yet Reviewed

$5,213.00

—

$6,154.00

BendPak MDS-6EXT Mid-Rise Open-Center Car Lifts

The BendPak MDS-6EXT mid-rise open-center car lifts are the ideal solution for quick-lube stations looking to install a car lift flush over their work pits. You haven't experienced state-of-the-art portable lifting convenience until you've used a BendPak MDS-6EXT mid-rise scissor lift. This family of 6,000-lb. capacity mid-rise lifts comes loaded with adjustable arm assemblies, safety lock bars with multiple lock positions. The next generation of electric vehicles has arrived, and it didn't go unnoticed by BendPak that the lifting points of these vehicles are very different. Using long-wheelbase vehicles, which includes some very popular electric cars, as BendPak's point of reference, they designed the MDS-6EXT mid-rise open-center car lift to accommodate longer lifting points that better reach the extreme edges of the vehicle underbody. If your shop wants to be ready for longer-wheelbase vehicles, no matter how low the suspension, you can't do better than this BendPak model. Specifications for the BendPak MDS-6EXT mid-rise open-center car lifts: * Each lift platform features four solid steel-scissor frame support bars, making it one of the strongest mid-rise lifts in its class * Powdercoat finish provides a long-lasting durable finish * Comes standard with four durable cushioned and rubber contact blocks, permitting fast vehicle setup * Three locking positions allow technicians to work at different working heights to increase productivity and minimize fatigue * Dual master hydraulic cylinder combines with dual equalizing cylinders to provide a safe and level 6,000 pound lifting capacity * Solid steel safety lock bars engage automatically during ascent * Convenient stainless steel pneumatic cylinders simultaneously release safety locks during descent with a simple push of a button (requires min. 50 psi, 10 cfm air source at time of installation) * A push-button safety lock release system is operated away from the lift and allows operators to safely deactivate the locks without the need to push or pull cumbersome release bars or lock release handles * Hinge point features Zerk grease fitting to allow lubrication at critical wear areas

Not Yet Reviewed

$8,295.00

BendPak MLS-18 High Jack Stands

The BendPak MLS-18 high jack stands are designed to support raised heavy-duty vehicles and facilitate maintenance and inspection procedures. These support stands are designed to be used in sets of four, six, or eight, and must be placed under a level, raised vehicle at the support points designated by the vehicle manufacturer. For extra support exactly where you need it most, count on the BendPak MLS-18 mobile high-lift jack stands. They're capable of holding up to 18,000 lbs. each. The high jack stands are sold individually, order the quantity needed. Features and specs: * Tripod design evenly distributes weight under load * Each leg is equipped with an 11 sq. in. floor pad * Can be easily moved and placed under a vehicle by means of two 3 in. diameter wheels * Equipped with a foldaway transport handle * Center tube is spring-assisted to facilitate adjustment of the stand * Adjustable from 48.7 in. up to 74.5 in. * 9-pin positions * 1-inch diameter self-locking ACME screw for fine adjustment of the stand height

Not Yet Reviewed

$1,325.00

Parts and Accessories