Free Shipping on Orders Over $109 at Summit Racing

On Sale

BendPak Steel Approach Ramps

BendPak steel approach ramps make it easier to get your low-profile car on to the lift without risk of damage. Their ramps offer heavy-duty construction, extended lengths, a low-rise design, a textured surface for better tire grip, and extra width to support big wheels and vehicles. BendPak ramps include brackets and necessary hardware to set them up. Choose a pair of ramps designed for your BendPak lift.

2.0 out of 5 stars ( 1 )

$4,295.00

$1,550.00

—

$3,895.00

Winters Quick-Change Forged Steel Tube and Bell Clamp Rear Axle Assemblies

Winters quick-change forged steel tube and bell clamp rear axle assemblies offer traditional hot rodding with the very latest technology. They feature a Winters Sprint Car center with a 10 in. diameter, a heat-treated lower shaft, axle seals, a large 31-spline Winters track differential, and CNC-machined components. Their virtually unbreakable, parallel-gear design automatically senses wheel spin and delivers positive traction. The axle assemblies feature Ford Big Bearing style housing ends that will accept stock 3.150 in. diameter axle bearings.

5.0 out of 5 stars ( 2 )

$3,349.99

Winters Steel Tube and Bell Banjo Axle Assemblies

Improving on Henry's design, Winters steel tube and bell banjo axle assemblies will put power to the pavement! Winters bumps the banjo up a level with these stock-appearing cast aluminum banjo centers fitted with their steel tubes and bells. They come complete with an 8 3/8 in., 3.78 ratio ring and pinion, as well as a race-proven Wedgelock all-gear drive differential that senses wheel spin and delivers positive traction. Making a good thing better--Winters steel tube and bell banjo axle assemblies.

5.0 out of 5 stars ( 1 )

$3,028.99

Quarter Master Steel Driveshafts

Quarter Master steel driveshafts feature unsurpassed strength and smooth, vibration-free performance. Built from durable, quality steel, these driveshafts are matched with ultra-durable slip yokes and U-joints to ensure a perfect driveshaft combination. Move your driveline forward with high-quality steel driveshafts from Quarter Master.

2.0 out of 5 stars ( 1 )

$453.41

—

$476.08

Crower Ultra Light Forged Steel Crankshafts

These Crower Ultra Light forged steel crankshafts are precision-machined from premium 4340 NT forgings with ultra-light profiling, pendulum undercutting, center counterweight removal, four lightning holes, and radius edges. The smaller outside diameter quickens throttle response, reduces stress and wear, creates less drag in oil, and increases horsepower and torque. Crower Ultra Light forged steel crankshafts are built to order; please specify the required length and main journal size when ordering.

Not Yet Reviewed

$6,836.99

BendPak PCL-18B Cross Beams

BendPak's PCL-18B cross beams for their portable column lifting systems connect two mobile column lifts, allowing you to lift most heavy-duty commercial vehicles safely and securely. Featuring single-piece construction, these chassis support beams have rugged stainless steel frames with a rust-, chemical-, and abrasion-resistant finish. Each BendPak cross beam has an 18,000 lb. capacity and lifts vehicle from the chassis frame, giving you complete wheels-free access to perform a variety of wheel maintenance.

Not Yet Reviewed

$5,595.00

Heidts Superide Independent Front Suspension Kits

Independent front suspension gives you twice the ride of a new 4-link dropped axle at a comparable cost. These Heidts Superide independent front suspension packages have been engineered for a correct, safe ride, while providing the ultimate stance. They feature a one-piece crossmember with upper control arms that clear the fenders, and their 56 in. hub-to-hub tread width gives you the narrow look without any tire-to-fender clearance problems. The packages include specially designed one-piece 1045 heat-treated alloy steel spindles to give you the lowest possible ride available, the high-tech appearance you want, and assurance of the right geometry, right fit, and a great ride. Nearly a hundred packages are available to fit applications from the 1920s and up. Components include: * Heidts one-piece crossmember * Superide spindles * Tubular upper and lower control arms * Front disc brake kit with 11 in. diameter brake rotors and 4-piston brake calipers * Manual rack and pinion steering, rear mounted * Billet single adjustable coilover shocks with silver powdercoated springs

Not Yet Reviewed

$5,213.00

—

$6,154.00

iDEAL Equipment Open Front Paint Spray Booths

iDEAL 'A-Frame' Open Front Paint Spray Booths are economic, commercial-grade open front units designed to provide optimal 'airflow' with superior lighting for high-quality spray painting and finishing applications. They're a great solution for industrial batch-type and automated production-type finishing systems. Air flows through the open front section of the booth, then passes through the work area toward the rear of booth into the filtered exhaust chamber. Filtered exhaust air is then drawn through the exhaust plenum and discharged upward through the exhaust fan and ducting. The booths are easily installed with heavy-duty, precision-punched 18-gauge panels, allowing for quick nut and bolt assembly. Each booth is standard with a bright white powdercoat finish, deluxe control panel, premium exhaust filters, hinged glass light fixtures, and high-quality tube-axial exhaust fan. Features and specs: * Commercial-grade design for optimal airflow and lighting coverage * Deluxe control panel included * White powdercoat panel finish (inside and outside) * Heavy-duty, precision-punched 18-gauge panel construction * Convenient 5/16 in. bolt and serrated lock nut assembly * UL Listed Dayton 24 in. tube-axial exhaust fan with spark-resistant fan blades * NEMA rated 2 hp, 3 phase, 230/460 V AC 60hz motor standard * Premium AFC exhaust filters * LDPI industrial light fixtures with inside access hinged glass door * (2) LPDI industrial (CLS1 / Div. 2) light fixtures – UL and ETL (Groups A, B, C, and D) * True 'daylight color' with GE T8 48 in. fluorescent lamps 32 watts, 2900 lumens, 5000K * Optimal airflow with CFM 7,983 at .5 static pressure * Inside dimensions: 13 ft. wide x 8 ft. 6 in. high x 7 ft. 6 in. deep * All assembly hardware, manometer, and sealant included * Meets or exceeds all applicable OSHA and HFPA 33 regulations * Easy to install, operate, and maintain

Not Yet Reviewed

$9,050.00

iDEAL Equipment Electric/Hydraulic ATV Lift Benches

iDEAL Equipment electric/hydraulic ATV lift benches are up to the challenge of lifting all ATVs on the market today. Featuring a new and innovative retractable ramp system, with a pivot approach ramps that fold out of the way as the lift raises and become wheels stops. Keeping the safety of the technician in mind, a single point hand-held pendant controls lift bench functions for raising or lowering the platform, eliminating the need to use hands or feet to disengage manual safety latches. These features limit injury, while saving time and space, making your shop area more productive. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 2,200 lbs. * Six locking positions * Extended length of 27.5 in. with full width approach ramp * Wheel stop * Overall length is 116.5 in. long, fully lowered * Platform is 88.6 in. Long x 50 in. wide * Maximum lift height 47.2 in. * 110 V integrated electric/hydraulic power unit

Not Yet Reviewed

$4,410.00

On Sale

Ranger Truck Spray Wash Cabinets with Skimmer

Ranger truck spray wash cabinets with skimmer can degrease even your filthiest car parts in no time flat. They're powerful, versatile, and feature a 53 gallon capacity. If your shop handles a lot of larger vehicles, then you'll definitely appreciate the extra-large capacity. With an inside compartment height of 54 in., the spray wash cabinets can handle anything from engine parts to tractor parts. Each unit is equipped with a large, 30 in. diameter turntable that can carry a payload up to 1,000 lbs. These cabinets are built to last, with gasket-free doors constructed of heavy 12-gauge steel, then coated in industrial 2-step primer and a powdercoat finish. Stainless steel nozzles and a 70 gpm pump add to the quality. Choose the easy-to-use spray wash cabinet to clean up your heaviest, dirtiest auto parts: Ranger!

Not Yet Reviewed

$10,495.00

$9,895.00

Callies Compstar Crankshafts

You're installing value without compromising quality with Callies Compstar crankshafts. Finished and inspected by Callies, Compstar cranks maintain proper geometry and design. Hardened with deep nitride, They're ideal for all types of abusive racing environments and available in a wide variety of strokes and journal sizes to fit most common cubic inch requirements. All rod journals are drilled and counterweights are profiled for piston clearance. Sometimes you need to race within a budget, but with Callies' consistent grind and polish, as well as their precise stroke and index, you don't need to compromise on quality. Choose Callies Compstar crankshafts--they're better by design.

4.6 out of 5 stars ( 10 )

$1,011.00

—

$1,051.00

On Sale

Ranger Professional Spray Wash Cabinets with Skimmer

Ranger professional spray wash cabinets with skimmer will degrease even your filthiest car parts in no time flat. They feature a 50 gallon tank capacity, with larger solution tank to make them even more versatile and productive. An octagonal full-opening door increases access to the turntable to enhance the operator's loading capabilities. Simple operating controls, stainless steel nozzles, a gasket-free door, and a large 70 gpm pump demonstrates Ranger's commitment to enhanced performance and productivity without a single sacrifice in quality. Like all Ranger spray wash cabinets, these professional units with skimmers are built to last. Cabinets and doors are constructed with heavy-duty 12-gauge steel and then coated with an industrial two-step primer and polyurethane finish.

Not Yet Reviewed

$9,695.00

$9,095.00

Heidts 4-Link Rear Suspension Kits

Heidts 4-link kits transform your classic vehicle into a high performance fun street machine with a modern suspension. These complete kits stiffen the body, and the tunable rear 4-links provide the best traction and bring a ton more tuning potential to the table. Bolt-in and weld-in kits are both available. Heidts utilizes proven engineering and design for high performance street and track purposes.

5.0 out of 5 stars ( 2 )

$2,125.00

Bed Wood and Parts Deluxe X Kits

Bed Wood and Parts Deluxe X kits include your wood choice, polished stainless steel bed strips with matching hardware, plus pre-drilling of the bed-to-frame and perimeter bolt holes. The wood is pre-finished with your choice of Bed Wood's water-based, environmentally friendly formulas in satin or gloss. Both products are specially designed to seal and protect your wood, while accentuating the grain and natural beauty. The exterior wood sealer incorporates biocides, fungicides, and UV protectant to ensure long-lasting protection. Revitalize your truck bed the easy, high-end way with a Bed Wood and Parts Deluxe X kit designed to fit your truck bed!

Not Yet Reviewed

$2,440.00

iDEAL Equipment Lift Crossmember Adapters

iDEAL Equipment lift crossmember adapters allow you to use the MSC-18K-X to lift heavy-duty vehicles from the frame for wheels free lifting expanding service and maintenance options. Using these crossbeam adapters individually with the MSC-18K-X-236, 2-column lift, allow you to raise one end of a vehicle or in pairs using the MSC-18K-X-472, 4-column lift, to raise an entire vehicle. iDEAL Equipment lift crossmember adapters come with three sets of heavy-duty pads for use with specific lift point applications, two standard pad adapters, two axle pad adapters and two cradle pad adapters. Features and benefits: * 22,000 to 33,000 lb. capacity * 6 1/4 in. minimum to 110 in. maximum pad width * 20 in. minimum to 25 in. maximum pad height * 121 in. L x 53-1/4 in. W * Beam width is 8 in.

Not Yet Reviewed

$3,040.00

iDEAL Equipment Electric/Hydraulic Motorcycle Lift Benches

iDEAL Equipment electric/hydraulic motorcycle lift benches feature a new and innovative retractable ramp system, with a pivot approach ramps that fold out of the way as the lift raises. Keeping the safety of the technician in mind, a spring-loaded drop-down panel in the table provides easier access to the rear wheel for service, while a single point hand-held pendant controls lift bench functions for raising or lowering the platform, eliminating the need to use hands or feet to disengage manual safety latches. These features limit injury, while saving time and space, making your shop area more productive. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 2,200 lbs. * Six locking positions * Extended length of 27.5 in. with full width approach ramp * Wheel stop * Overall length is 116.5 in. long, fully lowered * Platform is 88.6 in. L x 31.5 in. W * Maximum lift height 47.2 in. * 110 V integrated electric/hydraulic power unit

Not Yet Reviewed

$3,770.00

On Sale

Ranger RP-20FC Oil Filter Crush Presses

Ranger RP-20FC oil filter crush presses can apply 10 tons of pure, air-operated pressure to just about any used oil filter or can--easily reducing it to 25 percent of its original size and removing 95 percent of the oil. An integrated collection chamber and collector downspout makes oil recovery a cinch. At the drastically reduced size, cans and oil filters are much cheaper to dispose of, so these presses are great for the environment and your bank account. They're perfect for crushing light-duty truck and automotive filters; even the popular 8 in. tall filters for Cummins and Powerstroke diesel-powered vehicles fold beneath the massive weight of these presses.

Not Yet Reviewed

$2,475.00

$2,325.00

American Racing Headers C3 Corvette Headers

American Racing Headers C3 Corvette headers are available for both conventional small block applications and for LS-based engine swaps into 1968-1982 C3 Corvette chassis. C3 owners can now get a set of ultra-high-quality headers that fit and perform great and will last indefinitely. ARH C3 Corvette headers are available in range of primary tube sizes and collector diameters. Small block headers work with straight or angle plug heads. Both LS and small block ARH headers offer easy plug access, along with excellent ground clearance on lowered vehicles. Also available is ARH's C3 long system that includes their C3 headers, leak-free ball socket connections, and connection pipes that extend through the circular openings of the transmission cross member. American Racing Headers C3 Corvette headers features: * 100 percent long-lasting 304 stainless steel * 3/8 in. thick laser-cut flanges for a warp-free seal * Hand-ported TIG-welded inlets * Optimized primary tube routing for superior fit and performance * Merge collectors include welded scavenger spikes * The only set of headers you should ever need to buy * All American Racing Headers exhaust systems are for off-road use only

5.0 out of 5 stars ( 2 )

$1,517.01

iDEAL Equipment Electric/Hydraulic UTV Frame Lift Benches

Premium products at an affordable price. iDEAL Equipment electric/hydraulic UTV frame lift benches are frame engaging utility and all-terrain vehicle lifts allowing for easy wheel and suspension service. Featuring a 2,500 lbs. lift capacity, along with a 24 in. wide x 88.9 in. long platform, with flip-up extension platforms, and a small lift footprint providing a safe, unobstructed work area. Keeping the safety of the technician in mind, iDEAL Equipment electric/hydraulic UTV frame lift benches come with a portable or fixed pedestal control stand and fully operational control panel, with electro-magnetic lock release, eliminating the need to use hands or feet to disengage manual safety latches. These features limit injury, while saving time and space, making your shop area more productive. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 2,500 lbs. * Three locking positions * Platform is 88.9 in. Long x 24 in. wide * 4.75 in. minimum height * 43 in. maximum lift height * Load bearing hinged platform extensions * Four 4.75 in. x 6.5 in. rubber contact lift pads included * 110 V integrated electric/hydraulic power unit

Not Yet Reviewed

$4,070.00

On Sale

Stainless Works Header Builder Kits

Stainless Works offers a wide range of header builder kits for your customization projects. The 304 stainless steel header builder kits include two 3/8 in. thick laser-cut flanges (to be specified by customer), 12 J-bends (one 6 in. long leg and one 12 in. long leg), two formed collectors, and two filler diamonds to connect the tubes together. Specify desired flange style; and choose your primary tube and collector diameters. All tubes are mandrel-bent for optimal flow in the J-bends. Order the header builder kit with options desired for your exhaust system.

Not Yet Reviewed

$878.75

—

$926.25

$740.00

—

$780.00

iDEAL Equipment Electric/Hydraulic UTV Lift Benches

Designed to fit the largest UTVs, iDEAL Equipment electric/hydraulic UTV lift benches feature a 2,200 lbs. capacity, along with a 65 in. x 88.6 in. platform. Featuring newly designed drive on pivot ramps that fold down and out of the way to become wheel stops. While an innovative retractable center ramp slides out of the way making for a safe, unobstructed workspace. Keeping the safety of the technician in mind, iDEAL Equipment electric/hydraulic UTV lift benches UTV side extensions incorporate innovative center drop panels providing unmatched service access, including motorcycle service, without removing the extensions. A single point hand-held pendant controls raising or lowering the bench, eliminating the need to use hands or feet to disengage manual safety latches. These features limit injury, while saving time and space, making your shop area more productive. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 2,200 lbs. * Six locking positions * Extended length of 27.5 in. with full width approach ramp * Overall length is 116.5 in. long, fully lowered * Platform is 88.6 in. L x 65 in. W * Maximum lift height 47.2 in. * 110 V integrated electric/hydraulic power unit

Not Yet Reviewed

$4,920.00

BendPak MLS-18 High Jack Stands

The BendPak MLS-18 high jack stands are designed to support raised heavy-duty vehicles and facilitate maintenance and inspection procedures. These support stands are designed to be used in sets of four, six, or eight, and must be placed under a level, raised vehicle at the support points designated by the vehicle manufacturer. For extra support exactly where you need it most, count on the BendPak MLS-18 mobile high-lift jack stands. They're capable of holding up to 18,000 lbs. each. The high jack stands are sold individually, order the quantity needed. Features and specs: * Tripod design evenly distributes weight under load * Each leg is equipped with an 11 sq. in. floor pad * Can be easily moved and placed under a vehicle by means of two 3 in. diameter wheels * Equipped with a foldaway transport handle * Center tube is spring-assisted to facilitate adjustment of the stand * Adjustable from 48.7 in. up to 74.5 in. * 9-pin positions * 1-inch diameter self-locking ACME screw for fine adjustment of the stand height

Not Yet Reviewed

$1,325.00

Ranger 10-Ton Long Frame Floor Jacks

Ranger 10-ton long frame floor jacks are designed for extreme lifting. These hydraulic jacks will safely lift vehicles up to 23 in. in the air, with a weight capacity of up to 20,000 lbs. They're perfect for servicing truck fleets, buses, farming or heavy construction equipment, and other vehicles that require access to very low areas. Additional features include an alloy-plated ram, a safety overload system (to prevent sudden collapse), and heavy-duty swivel casters for easy maneuvering in tight spaces. The pump handle can also be locked in 3 different towing positions, and the foot pedal control makes setup and lifting a breeze. Built to last from durable heavy steel, Ranger 10-ton long frame floor jacks offer a long lifting life that won't let you down.

Not Yet Reviewed

$1,725.00

Crower Standard Series Crankshafts

Crankshafts are the most critical part of your engine's performance. Crower Standard Series crankshafts help to provide the best possible performance for your application, matching your head and valvetrain components to perfection. Made of forged 4340 steel for superior performance, they are available with internal and external balance. These crankshafts have numerous designs to meet anyone's needs, whether it's a smooth, lower lift rate for higher rpm and more durability, needing less spring pressure and less valvetrain modification, or a higher lift rate for less rpm with more spring pressure and lighter valvetrain components, providing the explosive power typically needed in race applications. So, if you're looking for a high performance crankshaft and want nothing but the best, these Crower Standard Series crankshafts are your answer.

Not Yet Reviewed

$4,203.99

—

$6,363.99

201 Results Found For "Steel"