Free Shipping on Orders Over $109 at Summit Racing

Vintage Air Gen-V SureFit Systems Complete Kits

Vintage Air Gen-V SureFit Systems complete kits are powerful and intelligent climate control systems. Available for vehicles with or without factory air, they use an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and-fin cooling coils provide outstanding performance and instant temperature adjustments. Vintage Air Gen-V SureFit Systems feature variable blower speed and dash/floor/defrost blend. They will include everything in an evaporator kit, plus all underhood components, such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware, and installation instructions. Additional features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection-molded case for optimal precision, strength, and quality * Injection-molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high performance blower * Bolt-in replacement control panel

4.63 out of 5 stars ( 8 )

$2,276.99

—

$2,858.99

BendPak MDS-6EXT Mid-Rise Open-Center Car Lifts

The BendPak MDS-6EXT mid-rise open-center car lifts are the ideal solution for quick-lube stations looking to install a car lift flush over their work pits. You haven't experienced state-of-the-art portable lifting convenience until you've used a BendPak MDS-6EXT mid-rise scissor lift. This family of 6,000-lb. capacity mid-rise lifts comes loaded with adjustable arm assemblies, safety lock bars with multiple lock positions. The next generation of electric vehicles has arrived, and it didn't go unnoticed by BendPak that the lifting points of these vehicles are very different. Using long-wheelbase vehicles, which includes some very popular electric cars, as BendPak's point of reference, they designed the MDS-6EXT mid-rise open-center car lift to accommodate longer lifting points that better reach the extreme edges of the vehicle underbody. If your shop wants to be ready for longer-wheelbase vehicles, no matter how low the suspension, you can't do better than this BendPak model. Specifications for the BendPak MDS-6EXT mid-rise open-center car lifts: * Each lift platform features four solid steel-scissor frame support bars, making it one of the strongest mid-rise lifts in its class * Powdercoat finish provides a long-lasting durable finish * Comes standard with four durable cushioned and rubber contact blocks, permitting fast vehicle setup * Three locking positions allow technicians to work at different working heights to increase productivity and minimize fatigue * Dual master hydraulic cylinder combines with dual equalizing cylinders to provide a safe and level 6,000 pound lifting capacity * Solid steel safety lock bars engage automatically during ascent * Convenient stainless steel pneumatic cylinders simultaneously release safety locks during descent with a simple push of a button (requires min. 50 psi, 10 cfm air source at time of installation) * A push-button safety lock release system is operated away from the lift and allows operators to safely deactivate the locks without the need to push or pull cumbersome release bars or lock release handles * Hinge point features Zerk grease fitting to allow lubrication at critical wear areas

Not Yet Reviewed

$8,295.00

EMAX Industrial Plus Silent Air Piston Compressors

EMAX Industrial Plus Silent Air piston compressors are quiet. The most common complaints about compressors are their high noise levels. EMAX Silent Air units not only still the noise, but they also do it with a big cfm output and lower rpm. Featuring their Whisper 100 system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling intake air through a series of baffle plates and prefilter media inside the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer structure; plus, it also provides secondary filtration for cleaner air. Industrial Plus Silent Air piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with a built-in fan. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. All EMAX Industrial Plus compressors have low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Their 15 Service Factor means the motors can be pulled 15 percent over full load. Depending on the application, many Silent Air piston compressors feature totally enclosed, fan-cooled (TEFC) motors that keep harmful dust and particulates out of the motor. This allows them to be used in dusty commercial and industrial environments without worrying about maintenance. They have 100 percent copper windings with pre-wired magnetic starters (necessary on any motor over 15 amps). These are high-quality, name brand, premium efficiency motors that meet all UL and CSA requirements. Some lower horsepower models are equipped with name brand, open-drip (OPD) motors. The running and starting windings on these motors are all 100 percent copper-wound for premium efficiency, reliable performance, and durability. These units also meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Plus Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * Raised-pump mounting platforms that open the underside of the crankcase to cooling air flow * Automatic belt tensioners for much easier and quicker adjustments and alignment * Selectable continuous-run or automatic start/stop operation to maximize performance and reduce wear * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Dual-timer automatic tank drains eliminate maintenance * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings

4.75 out of 5 stars ( 16 )

$4,578.90

Vintage Air Gen-V Magnum Max SureFit Systems Complete Kits

Vintage Air Gen-V Magnum Max SureFit Systems climate control complete kits offer powerful and technologically advanced control. They employ an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate, state-of-the-art, high-density aluminum heat exchangers pack the maximum possible performance and reliability within the confines of your dash. Each complete kit includes everything from the evaporator kit with Magnum Max blower, plus all under-hood components, such as the compressor and bracket, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware, and detailed installation instructions. Select the Vintage Air Gen-V Magnum Max SureFit complete kit designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength, and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * New electronic control panel included * Stamped firewall cover assembly * Quiet high performance blower

Not Yet Reviewed

$2,609.99

Moser Engineering Mopar 8 3/4 in. Housing and Axle Packages

Moser Engineering Mopar 8 3/4 in. housing and axle packages give you the freedom to choose the components that you prefer, while still fitting your A, B, or E-body without modifications. The packages include: * MO875 fabricated housing * Axle shaft set with wheel studs * 9400M bearings * Stock located spring perches * Center section studs * T-bolt kit * Gasket

5.0 out of 5 stars ( 2 )

$1,712.00

Moser Engineering 12-Bolt GM Housing and Axle Packages

Moser Engineering 12-bolt GM housing and axle packages give you the freedom to choose the components that you prefer, while still fitting your vehicle without modifications. They include a steel housing, an axle shaft set with wheel studs, bearings, and a drain plug. You can order them with brakes, to fit your OEM brakes, or a specific brake kit. Available in a multitude of options, the Moser 12-bolt GM housing and axle packages are a perfect fit for your everyday driver or performance vehicle.

Not Yet Reviewed

$4,494.00

BendPak MDS-6EXTF Mid-Rise Open-Center Car Lifts

Using long-wheelbase vehicles as BendPak's point of reference, they designed the MDS-6EXT mid-rise open-center car lifts to accommodate longer lifting points that better reach the extreme edges of the vehicle underbody. Along with the flush-mount MDS-6EXTF, these two extended mid-rise lift models maintain their open-center design, just like their standard length MDS-6LP and MDS-6LPF models. The MDS-6EXTF extended-length, flush-mount, mid-rise lifts provide quick-lube stations looking to install a car lift flush over work pits. If your shop wants to be ready for longer-wheelbase vehicles and minimize the lift's footprint, you can't do better than BendPak's MDS-6EXTF mid-rise open-center car lift. Key features: * 6,000-lb. lifting capacity * Open-center design/flush-mount * Adjustable arm assemblies * Solid-steel safety lock bars * Multiple lock positions * Hinge-point with Zerk grease fittings * Low-profile design * Rubber blocks included * Removable ramps

Not Yet Reviewed

$8,195.00

Classic Performance Complete Fuel Injection-Ready Tank Kits

Classic Performance complete fuel injection-ready tank kits are the most complete choice when adding a fuel injection-ready tank to your vehicle. They include an original-fit tank with built-in fuel tray, a fuel tank sending unit, and a fuel regulator/filter combined with the most comprehensive EFI fuel line kit in the market that's packaged with the fuel hoses and all the fittings to plumb from the fuel pump forward. All fuel fittings have a push-lock connect end that does not require specialty tools to disassemble. CPP tank kits also include a 255 lph in-tank pump that supports up to 600 hp, or an upgraded high-volume pump option with the proper install components. In-tank pumps are much more efficient and run much cooler than running an inline pump. Classic Performance kits contain all of the necessary pieces to mount to your vehicle for a simple upgrade install.

4.5 out of 5 stars ( 2 )

$620.99

—

$673.99

Vintage Air Gen-V SureFit Max Systems Complete Kits

Vintage Air 5th generation SureFit climate control systems are the most powerful and technologically advanced systems available today. They employ an exclusive, fully electronic microprocessor-controlled system that eliminates cables or vacuum connections. Separate, state-of-the-art, high-density aluminum heat exchangers pack the maximum possible performance and reliability within the confines of your dash. Additional features include variable blower speed and dash/floor/defrost blend. Complete kits include everything in the evaporator kit plus, all underhood components such as compressor, engine brackets, condenser with brackets, pre-formed refrigerant lines, drier, fittings, hardware and installation instructions. Additional details: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Powdercoated steel mounting brackets * Quiet high-performance blower * Includes new bolt-in, LED backlit control panel * Stamped steel firewall cover panel * Steel firewall water drip tray * Replacement steel glove box (reduced capacity)

Not Yet Reviewed

$2,715.99

EMAX Industrial Piston Compressors

Offering the same quality and durability as their Industrial Plus Series (without the extra cost of some features), EMAX Industrial piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with built-in fans. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. Industrial Series compressors have name brand, open-drip (OPD), low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. With low harmonic distortion, these motors provide much higher torque in cold weather starting, and require less electricity to start. Other features include large starting and running capacitors, and dynamically balanced armatures. Running and starting windings are all copper-wound for premium efficiency, reliable performance, and durability. These motors meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX uses only taper-lock style, 2-groove pulleys with dual 2-groove, B-style belts to drive their pumps. Dual belts ensure long belt life with low vibration for smoother, quieter operation because dual belts do not have to be as tight as a single belt. Tighter belts put more load on the compressor pump and the motor bearings; that decreases the life of both. Much better than a fixed bore pulley with a set screw; the taper-lock design locks the pulley in position on the motor shaft preventing it from loosening or moving. EMAX piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * OSHA-approved, 13-gauge steel, expanded metal belt guards * ASME code-compliant tanks * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings * Big 1 3/8 in. output shafts * 15 Service Factor motors can be pulled 15 percent over full load

4.5 out of 5 stars ( 2 )

$8,394.60

GSI Machine and Fabrication Air Ride Bolt-On Front Suspension Kits

GSI Machine and Fabrication offers Air Ride bolt-on front suspension kits for a variety of applications—including many 1960s and '70s era Chevrolet trucks. These 100 percent bolt-in front crossmember kits include all the necessary components to replace your old worn-out suspension with new, modern air ride. Custom-designed tie rod adapters require no modification to the spindle; while narrowed track width facilitates driving and turning low. Wheel position has been moved forward 1 in. to center the wheel in the wheel opening; and upgraded steering powers rack and pinion. Kits are designed to use "clamshell" style motor mounts with a GM 350 engine; LS, LT, and big block engines are compatible with the use of GSI motor mount adapters (available separately). Everything has been carefully planned and designed to obtain the best drivability and easiest installation possible. Notes: * When installing an LS-based engine, the use of an F-body style oil pan is required * The rack and pinion unit is a late '80s Mustang-style with a 3/4-36 spline * Removal of inner fender well is required * Power steering hoses and fittings can be found at most speed shops or online retailers * Recommended wheel specs: 8.5 in. wide with 5.5 in. backspace or 9 in. wide with 6.0 in. backspace * Misc steering parts such as U-joints and shafts are not included * Designed around 71/72 C10 spindles, making this front end compatible with several brake kits Key features: * Re-engineered suspension and steering geometry * Raised crossmember for increased ground clearance * 61 in. track width * 8.5 in. adjustable suspension lift * Built-in limit stops * Updated steering to power rack and pinion unit * Easy alignment with eccentric cams at all four lower control arm pivots * Designed to lay frame when using up to a 30 in. tall tire

Not Yet Reviewed

$4,499.99

Moser Engineering 9 in. Housing and Axle Packages

Moser Engineering 9 in. housing and axle packages give you the freedom to choose the components that you prefer, while still fitting your vehicle without any modifications. They include a steel housing, an axle shaft set with wheel studs, and bearings. You can order them with brakes, or to fit your OEM brakes or a specific brake kit. Available in a multitude of options, these packages are a perfect fit for your everyday driver or performance vehicle.

Not Yet Reviewed

$1,331.00

—

$3,114.00

Moser Engineering Dana 60 Housing and Axle Packages

These Moser Engineering Dana 60 housing and axle packages give the freedom to choose components you prefer, while still fitting your vehicle without any modifications. They include a steel housing, axle shaft set with wheel studs, bearings, and drain plug. You can order them with brakes, to fit your OEM brakes, or a specific brake kit. Available in a multitude of options, the Moser Engineering Dana 60 housing and axle packages are a perfect fit your everyday driver or performance vehicle.

Not Yet Reviewed

$3,316.00

Classic Performance Power Steering Conversion Kits

Classic looks are great but the handling ... well, not so much. Classic Performance has designed, engineered, and tested their power steering conversion kits to make your vehicle navigate as good as it looks! CPP kits include their 400 or 500 Series power steering boxes that utilize the latest steering technology and assure smoother handling of your classic/vintage ride. Other kit components may vary, but whether your special ride is a full size Chevy car or a Ford pickup Classic Performance will make it better with one of their many power steering conversion kits.

4.06 out of 5 stars ( 125 )

$889.99

Vintage Air Gen-IV SureFit Systems Complete Kits

Ditch the cables for the totally cool Vintage Air Gen-IV SureFit Systems complete kits. These fly-by-wire systems are fully electronic servo motor controls--there are no cables or capillary tubes to route. Gen-IV systems are model-specific and offer climate-control technology for real-deal, bi-level airflow and "just right" temperature air blending. Vintage Air SureFit Gen-IV all-in-one systems are delivered with an evaporator kit, a condenser and drier package, brackets, mounting hardware, and instructions for a professional finish that maintains your car's value and cool looks. Chill your classic car the electronic way with Vintage Air Gen-IV SureFit Systems complete kits.

Not Yet Reviewed

$2,329.99

—

$2,556.99

15 Results Found For "fittings"