Availability
Trail-Gear Trail-Creeper 4.70 single transfer cases can be installed as replacements for your stock gear-driven case or combined with crawl boxes to create dual transfer cases. TG Trail-Creepers feature a 4.70 low-range gear set in fully rebuilt and inspected cases. They have triple-drilled flanges installed on both front and rear outputs and are available with 21 or 23-spline input gear, plus a choice of shifter options. All models include Trial-Gear Trail-Safe T-case output seals installed.
( 2 )
$1,999.99
Specifically designed for Toyota Tacoma trucks, the Trail-Gear Rock Defense dual T-case crossmembers provide a sturdy secure transfer case mount, while also providing superior transfer case protection while sliding across any rocks your vehicle can tackle. The Rock Defense T-case crossmembers are made from 3/8 in. thick 1010 steel, so you have confidence that your transfer case is supported and covered when you are sliding over even the nastiest rocks. These crossmember kits can be mounted either by drilling the frame and bolting the crossmember in, or simply by welding the crossmember mounting brackets to the frame and bolting the crossmember to the mounting brackets. Trail-Gear also offers single transfer case crossmember kits. Both dual case and single case crossmembers use the same mounting brackets, so that once you have your single case brackets installed, there is no need to change them when upgrading to dual cases. You simply bolt dual case crossmember into the same bracket, all that is needed is an additional T-case mount. Features and benefits: * Fits 1995-2004 Tacoma T-cases, automatic and manual transmissions, and uses your stock T-case mount(s) * Rock Defense T-case crossmember kits can be mounted either by drilling the frame and bolting the crossmember in, or simply by welding the crossmember mounting brackets to the frame and bolting the crossmember to the mounting brackets * Supplied mounting brackets are 1/4 in. thick 1010 steel and all necessary Grade 8 mounting hardware is included with top locking nuts * Both single and dual case crossmembers use the same mounting brackets, so that once you have your single case brackets installed, there is no need to change them when you upgrade to dual cases—simply bolt the dual case crossmember into the same bracket, all that is needed is an additional T-case mount (sold separately) * Crossmembers are shipped unpainted and should be painted or powdercoated before being installed
Not Yet Reviewed
$399.99
Trail-Gear assembled third members are off-road strong! These units are built with all-new housings and internal parts and are delivered ready for you to drop into your axle. TG assembled third members feature top-quality ring and pinion gears, lockers, solid pinion spacers for long gear life, and they include triple-drilled flanges to cover common driveshaft patterns. The V6 units feature larger OEM-style V6 gear sets with longer pinion gear. Choose your locker style, case style, and gear ratio for off-road performance from Trail-Gear's selection of assembled third members.
( 2 )
$1,375.10
—
$2,644.43
Trail-Gear assembled Super Finish third members are made from tool-grade 8620 steel and heat-treated for maximum strength and wear resistance. They include all new parts and are ready to drop into your axle with top-quality Super Finish 29-spline ring and pinion gears, and your choice of locker. The ring and pinion gears are treated with the REM Isotropic Super Finishing (ISF) process, which removes the microscopic peaks in the material and creates a surface on the ring and pinion gears with a roughness of less than 10 µin Ra. This means that there is less friction between the gears, reducing wear by 95 percent, and allowing the gears and bearings to run cooler and last longer. Select the ideal kit for your application. Additional features and benefits: * Fully built Super Finish 3rd members--all new parts--no used housings or internal components * 29-spline pinion spline is 7 percent larger in diameter than the 27-spline for increased strength * Available in 4.88 and 5.29 ratios for 4-cylinder, V6, and high-pinion applications * Gear teeth are cut using Gleason CNC hobbing machines and cutters * No break-in period * Non-directional surface that increases lubricant retention on the gear surface, reducing lubrication requirements * Dust shield pre-installed onto flange * High-pinion sets also include a high-pinion oil slinger * V6 units feature larger OEM-style V6 gear sets with a longer pinion gear * Trail-Safe pinon seal and nut included * Flange is quadruple drilled with popular Pickup/4Runner and Tacoma patterns: -- 66mm x 66mm x 11mm (Tacoma) -- 60mm x 60mm x 10mm (Pickup/4Runner and TG heavy-duty driveline) -- 60mm x 68.3mm x 10mm -- 61.5mm x 70mm x 10mm Notes: * Requires ring and pinion setup kit to complete the installation into your existing differential housing * For Toyota 8 in. solid axles only. Will not fit 7.5 in. IFS front axles.
Not Yet Reviewed
$1,998.17
—
$2,987.69
Trail-Gear Rock Defense roll cages will upgrade your Jeep by adding superior performance, safety, and durability. These components are made of heavy-duty mild steel that's designed to offer more protection in the event of a roll during your off-road or even on-road adventures. Trail-Gear Rock Defense roll cages are an excellent addition to any off-road enthusiast. Order the kit recommended for fitment on your vehicle.
( 5 )
$499.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
