Availability
Sunex Tools 3 ton service floor jacks are an affordable solution for the budget-conscious enthusiast who still wants the high quality that Sunex provides! High-carbon steel side plates increase the chassis strength of these 3 ton jacks. These jacks are stable and easily maneuvered, thanks to their wide front wheels and ball bearing mounted rear caster wheels. A 2-piece handle with a knurled hand grip provides non-slip ease of pumping and a longer reach under your vehicle. Overload and bypass safety valves prevent these jacks from being used beyond their rated capacity and prevent ram overextension. Wiper seals protect the hydraulic system from contaminants. Sunex Tools 3 ton service floor jacks are a great choice to handle any automotive repair shop work!
( 2 )
$244.99
—
$342.99
If you're looking for a high-strength floor jack that can lift everything from low-riding sports cars to SUVs and pick-ups, then Sunex Tools has you covered with the 2 ton Lowrider service jacks. Their low-profile design is consistent throughout the entire 18 in. chassis, allowing full reach beyond pinch welds--and with rapid-rise technology, it takes only 6 1/2 quick pumps to reach the 24 in. maximum height. Sunex Tools 2 ton Lowrider service jacks are built with rollers on the front and swivel wheels on the rear for easy maneuverability.
( 44 )
$410.99
Sunex Tools jack stands feature a steel base for stability. They can be adjusted to multiple height positions—and can accommodate vehicles with panel rails. The stands are available in different styles, extended height and weight capacities. Order the pair that best suits your needs.
( 97 )
$238.99
—
$302.99
Sunex Tools transmission jack fuel tank adapters help with the removal, installation, and moving of emptied automotive gas tanks. Designed for use on all under-hoist transmission jacks, these fuel tank adapters offer quick and easy installation to all ratcheting finger transmission jack saddles and include a universal adapter plate for all other saddles. The adapters feature foam support pads that can be adjusted for height, width, and length to fit any 40 gallon gas tank configuration. They also include a ground wire assembly to prevent static electric discharge on older metal tanks, and two 8 ft. tie-down straps to secure the tank to the adapter.
( 3 )
$355.99
Sunex Tools telescopic transmission jacks allow you to efficiently remove, install, and transport transmissions and transfer cases on vehicles supported by lifts. They feature a universal saddle that has four ratcheting arms to quickly adjust to the transmission pan shape and a tie-down chain to secure the load. Wide base legs with swivel caster wheels keep Sunex Tools telescopic transmission jacks stable and easy to maneuver.
( 22 )
$416.99
Sunex Tools impact sockets are machined from chromoly steel with a protective black finish for long life and dependability. Socket options include: standard or metric; drive size; deep well socket type and sizes; short well socket type and sizes. Some sets also contain extensions. Sunex impact sockets are available individually—or in various sets with a heavy-duty, blow-molded storage case.
( 84 )
$473.99
—
$762.99
Sunex Tools 22-Ton Air/Hydraulic truck jacks are your portable, heavy duty solution for truck and trailer shops, rail and bus work, and roadside service calls. These jacks feature a narrow chassis design, with a contoured base. This design allows them to easily fit between tandem wheels, and so wheels make contact with the ground when the jack is not under load, then raises them off the ground when under load to prevent damage. Wiper seals protect Sunex Tools 22-Ton Air/Hydraulic truck jacks' hydraulic system from contaminants, while overload and bypass safety valves prevent the jack from being used beyond rated capacity and ram over extension. A self-retracting ram lever on the release knob on top of the handle operates independently of the handle locking lever. These jacks also feature an integrated filter to protect their air motor. Four adapters are included.
( 1 )
$820.99
—
$1,378.99
Ensure unparalleled safety with the Sunex 20-ton shop press shields, specifically engineered for Sunex Tools presses. The shop press shields primary purpose, like the Sunex Tools SPS20 model, is to protect users from flying debris during pressing operations. The shield boasts spring-loaded locking levers for adjustable coverage and an aluminum frame to allow simple positioning, making it a crucial addition for any workspace. Product features: * Shop press safety shields are custom built for Sunex presses and provide ultimate safety and compliance with the ASME PASE: 2019 standard * Sunex Tools shop press shields offer protection from flying debris * Spring loaded locking levers position the shield at various heights to cover the work area * Shield frame constructed of aluminum extrusion for easy positioning
Not Yet Reviewed
$774.99
Get your auto garage in shape with premier equipment from Sunex Tools. Their shop presses feature welded frames to prevent excessive flexing under maximum load, along with a reinforced head bolster for added strength, and heavy-duty return springs for fast ram retraction. Sunex shop presses also include a pair of bed plates and a ram head in all of their models from 12 ton to 150 ton capacities. Many presses come with added features, like winch bed lifts with non-slip safety clutches, and 4 in. gauges to monitor internal working pressure and/or force in tons. Shop presses are available with manual, air-hydraulic, or electro-hydraulic power supplies. Whether your automotive application involves straightening, bending, or removing/installing gears, bearings, and bushings, Sunex shop presses will help you work like a pro.
( 6 )
$2,962.99
—
$4,692.99
Sunex Tools brake drum handlers are designed for removing, installing, and transporting outboard mounted brake drums and inboard mounted drums with disc wheel hubs found on most Class 7 and 8 tractor and trailer brake systems. They can accommodate 15 and 16.5 in. diameter brake drums without having to manually lift them, as large 8 in. diameter pneumatic wheels allow easy maneuverability. An adjustable angle bracket secures your drum to the handler, while a drive screw with a removable machine handle quickly raises and lowers the carriage.
( 1 )
$420.99
Sunex Tools quick lifting floor jacks are heavy-duty service jacks designed for dependable, continuous performance in any automotive service and repair shop. These jacks feature a rapid-rise hydraulic power unit that includes dual pump pistons that raise the lift arm to the maximum height in six full incremental pump strokes. They're made with a strong chassis with upper and lower frame flanges to withstand twisting. Wide front wheels and ball bearing mounted rear caster wheels provide easy maneuverability and stability when jacking. Their angular positioned pump pistons provide maximum pump stroke effectiveness when the jacks are completely under a vehicle. Sunex Tools quick lifting floor jacks also feature pump piston dust shields and wiper seals to prevent contaminants from entering their hydraulic systems. Overload and bypass safety valves prevent the jacks from being used beyond their rated capacity and the overextension of the jack ram. Rubber saddle pads with a grooved surface accept vehicle panel rails to protect the vehicle frame from scratches and provide a sure grip lifting surface. A pump handle protector pad prevents damage to your under-car components and any other vehicles parked close to the jacks.
( 12 )
$364.99
Sunex Tools engine stands are designed to position engines that need to be repaired or rebuilt. They have a fully adjustable mounting head and adapter fingers, as well as ball bearing mounted swivel casters. Some models have a space-saving folding design that is great for storage. The engine stands are available in 3- or 4-leg styles, with capacities from 1,000 to 2,000 lbs.
( 8 )
$448.99
—
$850.99
Sunex Tools air long chassis jacks are designed for lifting heavy vehicles, particularly trucks and trailers, in professional settings like truck and trailer repair shops. The long chassis allows for better reach and maneuverability under the vehicle, especially helpful in tight spaces like between dual wheels on trucks and trailers. Designed for long-lasting performance, these jacks are constructed with heavy-gauge steel and other robust materials to withstand the rigors of daily heavy-duty use. Sunex Tools air long chassis jack features: * Large frontal quad-casters support load with superior durability * Powerful internal air motor * Air actuation allows for effortless lifting and safety mechanisms to prevent overloading * Heavy-gauge steel frame resists twisting under pressure * Manual foot pump option bypasses air motor for portable applications
Not Yet Reviewed
$4,022.99
These Sunex Tools drill presses are packed full of features that make them useful around your shop. The 3/4 hp electric motor powers though even the toughest materials and gives you the options of 16 speeds. The 5/8 in. chuck allows you to use a wide variety of bits, and the heavy-duty steel table securely holds whatever you are working on. The table is also capable of rotating 360 degrees and tilting up to 45 degrees in either direction to help you complete your job. Sunex Tools combines all of these features with a heavy-duty base and column for added strength and rigidity, and you end up with one of the best floor drill presses available.
Not Yet Reviewed
$690.99
Sunex Tools Two Stage air/hydraulic telescopic truck jacks are designed for heavy-duty truck and trailer shop use, rail and bus work, and portable for roadside service calls. They feature a narrow chassis design that easily fits between tandem wheels, and their overload and safety valves prevent ram overextension or using them beyond their rated weight capacity. They also have a self-retracting arm and a contoured design that make the wheels have contact with the ground when they're not under load and raise them off the ground when under load to prevent damage. If you're looking for a professional jack that can do just about anything, look no further than these Sunex Tools Two Stage air/hydraulic telescopic truck jacks.
Not Yet Reviewed
$1,200.99
Sunex Tools 20-ton air/hydraulic truck jacks are high-quality tools that are made of superior-quality steel with a red finish. They feature a narrow chassis design that easily fits between tandem wheels, and a hand grip that allows them to be stored in a vertical fashion. Their wiper seals protect their hydraulic system from contamination, and their 5 in. composite wheels make maneuverability easy. They also have a self-retracting arm and their overload and safety valves prevent them from being used beyond their rated capacity and ram overextension. If a superior quality truck jack is what you want, Sunex Tools has what you need.
( 1 )
$649.99
Sunex Tools 44-ton truck axle jack with air return is designed for lifting heavy vehicles like trucks, buses, and agricultural equipment for maintenance and repair, and are particularly useful for raising vehicles at the axle, differential, or frame. These 44-ton truck axle jacks have a robust construction to withstand the rigors of heavy-duty use and include many features, including overload and bypass valves for safe operation. Product Highlights: * Narrow chassis design * Wiper seals protect hydraulic system from contaminants * Overload and bypass safety valves * Self-retracting ram * Sturdy one-piece handle eliminates wobble for safe operation * Full air actuation raises and lowers the ram with simple turn of variable speed control knob * Stacking adapters provide additional reach * Rubber-tired wheels and long handles allow for easy positioning and movement around the work area
Not Yet Reviewed
$2,306.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
