Ridetech - end KEYWORD - Free Shipping Savings Central - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

Ridetech MUSCLEBar Sway Bars

Ridetech has upgraded the traditional notion of sway bars with their MUSCLEBar. Using precision CNC tubing benders, investment cast steel bar ends, and Delrin lined mount bushings, Ridetech produces sway bars with unheard of dimensional and rate accuracy. MUSCLEBar features: * Precision CNC-bent tubing for accurate and repeatable fitment * Exact bar rates included with each bar * Delrin-lined frame mount bushings allow easy and predictable rotation over the stiction of polyurethane or rubber * Investment cast steel bar ends offer performance and appearance improvements over the traditional manufacturing * Easy installation spherical end links with barrel lock nuts * Compatible with OE manual steering, OE power steering, and aftermarket power steering conversions

3.96 out of 5 stars ( 24 )

$260.00

—

$595.00

Ridetech Streetgrip Suspension Systems

What are some of the virtues of a quality Ridetech Streetgrip suspension system? For starters, they're easy to install. The Delrin bushings eliminate deflection, and dual-rate springs allow the vehicle to transition small road irregularities via a compliant spring rate. Adjustable monotube shocks deliver premium ride quality and handling performance, while the tall upper ball joints reposition the control arms to correct camber for more stability. Sway bar end links are also included to minimize body roll through corners. Give your vehicle the components it needs to handle the road with a Streetgrip suspension system—Ridetech's one-box solution for better ride and control. Order the model designed for fitment on your vehicle.

5.0 out of 5 stars ( 1 )

$1,980.00

—

$3,950.00

Ridetech Streetgrip Sway Bars

Most vintage OEM front sway bars were calibrated with tires and cornering loads that were radically less capable than today. Ridetech increases the diameter of the sway bars to minimize body roll through the corners and optimize handling. Incorporated into the polyurethane frame bushings is a Delrin insert to eliminate stiction and allow the sway bar to move freely and improve ride quality. In addition, many stock sway bar designs create bind and poor sway bar geometry when the vehicle is lowered. Ridetech's beefy end link-style Streetgrip sway bars eliminate that bind, correct the geometry, and reduce body roll. Where applicable, adding a rear sway bar drastically decreases body roll and increases stability. RideTech StreetGrip rear sway bars are a direct bolt-on to your OE suspension or as part of a complete StreetGrip suspension package.

5.0 out of 5 stars ( 2 )

$395.00

Ridetech Rear Lowering Kits

Ridetech offers rear lowering kits for a wide range of vehicles. They include all the necessary parts to drop the back end of your truck, such as leaf shackle hangers, axle brackets, and Delrin® leaf spring bushings. Order the rear lowering kit recommended for your specific application.

Not Yet Reviewed

$1,625.00

Ridetech Adjustable Sway Bars

The main benefits of Ridetech adjustable sway bars are the ability to fine-tune vehicle handling by reducing body roll, improving cornering, and adapting your vehicle's balance for different driving conditions. This is achieved through multiple adjustment settings that allow drivers to match the sway bar's stiffness to their specific needs, from street performance to track and autocross use. Built for strength and durability, the sway bars come with all the hardware needed for installation, including the mounts, low friction bushings, billet aluminum mounts and adjustable end links. Features and benefits: * CNC-formed for design and manufacturing accuracy * Three position adjustability allows fine-tuning of vehicle balance and turn-in * Attractive satin black powdercoat finish provides a durable layer of corrosion protection * Low-friction sway bar mount bushings ensure proper positioning and noise-free operation * Billet sway bar mounts and end links offer strength, durability and an attractive look * Flexibility for different uses—suitable for a wide range of applications, from occasional track days to dedicated competition vehicles * Adaptable setup—designed for compatibility with both stock and aftermarket front suspension systems (such as the Ridetech SLA suspension)

Not Yet Reviewed

$295.00

Ridetech 1964-66 Mustang Complete Coilover Suspension Systems

The Ridetech complete coilover suspension system for the 1964-66 Ford Mustang includes everything you need to give your vintage muscle car modern drivability. The package contains front upper and lower control arms, tall spindles, steering arms, inner and outer tie rods, front MUSCLEBar, a bolt-In 4=link system, and four HQ Series coilovers for every corner of your vehicle. The benefit of buying a complete suspension system is that it removes all the guesswork when purchasing a new suspension. Ridetech has spent hours collecting data to find a perfect spring rate and components for your vehicle's performance and ride quality—designed to lower your vehicle. * Upper Strongarms feature corrected ball joint angles for the tall spindles. The upper ball joint have been moved back to allow for additional caster setting to improve high-speed stability and steering feel. Billet cross-shafts are included that feature a lowered mounting point to increase camber gain and correct suspension geometry. They house a stout double sheer lower shock mount. * Lower Strongarms feature a unique design that combines the control arm and strut rod into a stronger, more appealing one-piece design. Additional caster is designed into the arms and includes a robust bearing in an aluminum housing at the front mount to replace the soft factory rubber units. * Tru-Turn System includes tall spindles which induce more negative camber gain to maximize tire contact patch during cornering. It also includes steering arms, center link adapter, tie rods and adjusters to virtually eliminate bump steer, correct Ackerman angle, and allow for wider tires. Includes heavy-duty frame rail brace. This spindle is designed for use with 1967-69 Camaro brake systems. Compatible with OEM manual steering AND with the Borgeson power steering conversion box. * Optional "Hub" spindles offer the same geometry improvements as the pin spindles, but add the performance and simplicity of late model Mustang hubs and brakes. Includes S550 2015-23 Mustang hubs for maximum strength, consistent braking and reduced maintenance. Compatible with 2015-23 Mustang brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. Hubs fit Ford car 5 x 4.5 in. lug pattern and include 14mm studs. * HQ Series coilovers utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling; the rebound knob is located at the top of the shock for underhood access. The shocks come standard with a 1,000,0001 Mile Warranty. Interested in Autocross or Road Course racing? Consider the TQ Series coilovers. * Front MUSCLEBar sway bar helps reduce body roll and includes the PosiLink end links that provide immediate engagement between the chassis and control arms. Includes billet aluminum frame straps (anodized black) and low-friction bushings. * Bolt-on 4-link dramatically improves traction, handling, and ride quality. Installation does not require significant modifications to the floor pan and requires only minimal welding to the axle tube. Works with mini-tubs. All links are double adjustable with R-Joint rod ends, which combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is at home on the street as it is on the race track! * Weld-on lower axle brackets are available if using an aftermarket axle housing without stock-style leaf spring pads. (Part number 70010122, sold separately.)

Not Yet Reviewed

$7,990.00

Ridetech Tru-turn Steering Systems

Ridetech Tru-turn steering systems resolve poor suspension geometry, bad bump steer, and clearance issues on your early Camaro/Nova front-end. These packages include taller overall spindles to improve camber gain, steering arms designed to correct bump steer, and drag link brackets that bolt to your OEM drag link. They relocate your inner tie rod and minimize bump steer, and their tie rod assemblies are designed to integrate with your new steering arms and center link for a bolt-on system. Ridetech also offers upgrade packages with the same components minus the spindles. Choose a "Tru" no-fab steering system for your muscle car. They're available for a variety of cars from the 1960s and '70s

4.17 out of 5 stars ( 6 )

$2,970.00

—

$3,670.00

Ridetech 2015-24 Mustang Sway Bars

Equally important when upgrading suspension components, especially for track use or spirited driving, are the sway bars. The last thing you want to encounter when corner-carving in your Mustang is excessive body roll. Ridetech's 2015-24 Mustang sway bars, available for front or rear, are larger in diameter and adjustable, making them ideal for harnessing a muscle car's desire to roll-over during a cornering event. A car handles best when it can negotiate low, mid, and high-speed corners as flat as possible. Ridetech S550/S650 Mustang sway bars feature the right material design and bar rate making for a flatter handling car and come with a high payoff in handling performance improvement despite their relative ease of installation. Their adjustability makes them suitable for the street car that sees occasional driving at the local autocross or weekend track day on up to the dedicated competition muscle car setup to dominate at higher levels of competition. Choose the Ridetech 2015-24 Mustang sway bar desired for your car, or pair a front and rear for added tunability. Additional features: * Front sway bar is 2-position adjustable * Rear sway bar is 3-position adjustable * Reuses factory end-links to connect sway bar to suspension * Black satin powdercoat finish for corrosion resistance and durability

Not Yet Reviewed

$295.00

Ridetech HQ Series Shockwave Air Shocks

Having the proper suspension plays a big part in the outcome on the track--Ridetech HQ Series Shockwave air shocks are just what you've been looking for to add that desired performance to your vehicle! They improve ride quality over steel springs and provide a huge range of tuning options. Ridetech HQ Series Shockwave air shocks' mounting styles accommodate a wide variety of applications with more configuration options than ever before. They feature aluminum impact-forged construction for leak-free operation, and a monotube design for superior oil control, ride quality, and handling. You no longer have to settle for less when you have Ridetech HQ Series Shockwave air shocks on your vehicle! Features include: * Adjustable ride height--lower and raise the vehicle quickly without sacrificing drivability or durability * For longevity, the air spring is made from same high-quality rubber that 18-wheelers use * Available in a wide range of stroke lengths * Easy and precise single rebound shock valving adjustment with 26 clicks * Large rubber external bump stop to prevent harsh bottoming out * 5/8 in. hardened shaft is precision ground and straightened to a tolerance of .001 in. for increased durability and performance * Billet end cap with integrated debris wiper to prevent seal damage * Oversized rod guide improves piston rod stability * Integral internal bump stop prevents extension crashing * Hard coat external anodizing for lasting beauty and performance * Teflon piston wiper and progressive valving provide consistent piston/bore contact for repeatable performance * Monotube bore is cathode anodized for wear resistance * Specially-contoured composite gas separator cup optimizes dead length and ensures proper nitrogen/oil separation * Long-lasting KEVLAR® -lined bearings allow wide articulation with low noise

4.33 out of 5 stars ( 3 )

$1,555.00

Ridetech HD 4-Link Systems

Simple and effective—Ridetech HD 4-link systems upgrade less-than-perfect truck suspensions. Your heavy-duty truck hauls passengers, cargo, and trailers … occasionally all at the same time. Air suspension enables you to adjust spring rate for the load and improve your ride quality, load capacity, and handling performance. Ridetech HD 4-link systems are highly adaptable weld-on designs that will fit a wide range of 1/2 to one-ton trucks. You no longer need to endure harsh ride quality when unloaded to accommodate anticipated cargo when fully loaded. Light or heavy, with Ridetech HD 4-link systems your truck's ride performance will always be just right. RideTech HD 4-link systems include: * 1.5 in. diameter .188 in. wall DOM tube 4-link bars * Large durable polyurethane bushings * 2 in. diameter .250 in. wall tubing bridge * .250 in. thick plate steel brackets * Firestone air springs with a total load capacity of around 7,000 lbs.

5.0 out of 5 stars ( 1 )

$2,455.00

Ridetech Ford F-150 Rear Suspension Lowering Kits

Ridetech Ford F-150 rear suspension lowering kits drops your truck up to 5.5 in. in the rear, turning your vehicle into a high performance muscle truck with better stance, handling, and ride quality. These Ridetech kits are 100 percent bolt-on, fully adjustable, and include everything you need to lower the rear-end of your Ford F150 platform. Features, benefits, and contents: * Lowered stance -- Adjustable ride height--3 in. to 5 in. rear drop -- Improved ride quality and sharper handling * Adjustable Ridetech/Fox shocks -- Aluminum body -- Monotube/gas pressure -- Adjustable valving * Bolt-on installation -- No welding

Not Yet Reviewed

$1,160.00

Ridetech 1967-69 Camaro/Firebird HQ Coil-Over Systems

Ridetech 1967-69 Camaro / Firebird HQ coilover systems include everything you need to upgrade your existing suspension and give your muscle car an aggressive lowered stance with modern drivability. The packages contain front upper and lower control arms, tall spindles, a front sway bar, a rear 4-link, and four HQ Series coilovers for every corner of your vehicle. Buying a complete suspension system removes all the guesswork. Ridetech has spent hours collecting data to find a perfect spring rate and components for your vehicle's performance and ride quality. Product features: * Tall "pin" spindles will induce more negative camber gain to maximize tire contact patch during cornering. They also offer a 2 in. drop—which allows for the use of longer shocks, creating more suspension travel. Compatible with all brake kits designed to fit the stock disc brake spindle. * Optional "hub" spindles offer the same geometry improvements as the pin spindle but add the performance and simplicity of late model Corvette hubs and brakes. Uses C5/C6/C7 Corvette hubs for maximum strength, consistent braking and reduced maintenance. (Hubs not included.) Compatible with C5/C6 Corvette brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. * Upper Strongarms feature corrected ball joint angles for the tall spindles. The upper ball joints have been moved back to allow additional caster settings to improve high-speed stability and steering feel. Offset slugs are also available for additional caster. Injection-molded Delrin© bushings with 13 percent PTFE reduce deflection and stiction. * Lower Strongarms feature a double sheer lower mount for increased strength. Ridetech has also dropped the lower shock mount to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Injection-molded Delrin© bushings with 13 percent PTFE are used to reduce deflection and stiction. * HQ Series coilovers utilize an impact-forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling via the rebound adjustment knob, located at the top of the shock, for under-the-hood access. They come standard with a 1,000,0001 Mile Warranty. * Front sway bar reduces body roll and creates room for wider front tires. Includes billet aluminum frame straps (anodized black) and low friction bushings. * Bolt-on 4-link dramatically improves traction, handling, and ride quality. Installation does not require significant modifications to the floor pan and requires only minimal welding to the axle tube. Works with mini-tubs. All links are double adjustable with R-joint rod ends, which combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special street/strip bearing. Upgrades: * Tru-Turn System: The early Camaro/Nova front-ends have very poor suspension geometry; the tires lean outward around turns, the bump steer is terrible, and there's little room to run a wide wheel because of the OEM steering arm interference with the inside of the wheel. The Tru-Turn system resolves ALL these issues; the tires now lean INTO the turn, the bump steer is UNDER .050 in. through 5 in. of suspension travel, and you now have clearance to run up to a 10 in. wide wheel with a 275mm tire! Compatible with both the Ridetech "pin" and "hub" spindles. * Rear sway bar: The addition of the rear sway bar is for the true track car. Wide tires plus big horsepower typically mean faster corner speeds. The MUSCLEBar sway bar helps keep those rear tires hooked up through the corner. * Weld-on lower axle brackets are available for aftermarket axle housing without stock-style leaf spring pads. Part number 70010122 is sold separately.

Not Yet Reviewed

$6,125.00

Ridetech Strongarm Suspension Systems

Ridetech Strongarm suspension systems utilize an offset trailing arm with a "trussed" design which allows maximum tire width while providing the utmost in strength. The rear trailing arms have PTFE bearings, and the strut rods are outfitted with R-joint rod ends to combine the best qualities of low-friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is as home on the street as it is on the racetrack. When combined with the tubular rear crossmember, the trailing arms place the coilovers to the rear of the axle for better motion ratio and damping control while providing additional height adjustment via the movable lower coilover mounts. Features and benefits: * Lowers vehicle ride height * Mounting hardware to maintain ground and tire clearance, driveline angles, and load capacities * Bolt-on installation (no fabrication required) * Greatly improved handling performance * Ultimate ride quality

Not Yet Reviewed

$2,555.00

Ridetech 1967-69 Camaro/Firebird HQ Air Suspension Systems

Ridetech offers HQ air suspension systems for 1967-69 Camaro and Firebird (GM F-Body) applications. These Air Ride adjustable suspensions enable you to raise or lower your muscle car at the push of a button. The systems include front and rear HQ Series Shockwaves with adjustable rebound, plus upper and lower Strongarm front control arms, tall spindles, a bolt-on 4-link, and a front MUSCLEBar sway bar. Air Ride provides ultra-low show stance with modern ride quality and handling—and includes several components that will dramatically improve the suspension geometry to give your classic muscle car modern drivability. Systems are available with "pin" or "hub" spindles. Product features: * Tall "pin" spindles will induce more negative camber gain to maximize tire contact patch during cornering. They also offer a 2 in. drop—which allows for the use of longer shocks, creating more suspension travel. Compatible with all brake kits designed to fit the stock disc brake spindle. * OR … "hub" spindles offer the same geometry improvements as the pin spindle but add the performance and simplicity of late-model Corvette hubs and brakes. Uses C5/C6/C7 Corvette hubs for maximum strength, consistent braking, and reduced maintenance. (Hubs not included). Compatible with C5/C6 Corvette brake systems, OE, and aftermarket (caliper brackets included). Minimum 17 in. wheels. * The upper Strongarms feature corrected ball joint angles for the tall spindles. The upper ball joints have been moved back to allow for additional caster settings to improve high-speed stability and steering feel. Offset slugs are also available for additional caster. Delrin© bushings with 13 percent PTFE are used to reduce deflection and stiction. * The lower Strongarms feature a double sheer lower mount for increased strength. Ridetech has also dropped the lower shock mount to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Delrin© bushings with 13 percent PTFE are used to reduce deflection and stiction. * HQ Series Shockwaves utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling. The rebound knob is at the top of the shock for easy underhood access. * Front sway bar reduces body roll and creates room for wider front tires. Includes billet aluminum frame straps (anodized black) and low friction bushings. * The bolt-on 4-link dramatically improves traction, handling, and ride quality. Installation does not require significant modifications to the floor pan and requires only minimal welding to the axle tube. Works with mini-tubs. All links are double adjustable with R-joint rod ends, combining the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special street/strip bearing. Upgrades: * Early Camaro/Nova front-ends have very poor suspension geometry—the tires lean outward around turns, the bump steer is bad, and there's little room to run a wide wheel because of the OEM steering arm interference with the inside of the wheel. The Tru-Turn System resolves ALL these issues; the tires now lean INTO the turn, the bump steer is UNDER .050 in. through 5 in. of suspension travel, and you now have clearance to run up to a 10 in. wide wheel with a 275mm tire! Compatible with both the Ridetech "pin" and "hub" spindles. * The addition of the rear sway bar is for the true track car. Wide tires plus big horsepower typically means faster corner speeds. The MUSCLEBar sway bar helps keep those rear tires hooked up through the corner. * Compressor Sytems: Ridetech offers its Ridepro E5 air suspension control system as a pre-assembled, all-in-one module as the "Airpod"; or you can purchase the Ridepro E5 system as a component kit to install how you like.

Not Yet Reviewed

$6,315.00

Ridetech 1964-66 Mustang Air Suspension Systems

Ridetech 1964-66 Mustang air suspension systems are the perfect choice to deliver modern ride quality and handling to your classic muscle car, while providing an ultra-low show stance. (To complete this air suspension system, a Ridetech compressor system is required/recommended.) Ridetech 1964-66 Mustang air suspension systems include: * Upper Strongarms: feature corrected ball joint angles for the tall spindles (the upper ball joint has been moved back to allow for additional caster setting, which improves high-speed stability and steering feel). Billet cross shafts are included, with a lowered mounting point to increase camber gain and correct suspension geometry; they house a stout double sheer lower shock mount * Lower Strongarms: feature a unique design that combines the control and strut rod into a stronger, more appealing one-piece design. (Additional caster is designed into the arms, and includes a robust bearing in aluminum housing at the front mount to replace the soft factory rubber units) * Tru-Turn System: includes tall spindles, which induce more negative camber gain to maximize tire contact patch during cornering (also includes steering arms, center link adapter, tie rods and adjusters—to virtually eliminate bump steer, correct Ackerman angle, and allow for wider tires). This spindle is designed for use with 1967-69 Camaro brake systems (compatible with OEM manual steering, and with the Borgenson power steering conversion box). * HQ Series Shockwaves: utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling (they also allow fine-tuning of the ride quality and handling; the rebound knob is located at the top of the shock for underhood access). * Front MUSCLEBar: helps reduce body roll and includes the PosiLink end links that provide immediate engagement between the chassis and control arms * Bolt-on 4-link: installation does not require any major modifications to the floor pan, and requires only minimal welding to the axle tube; also works with minitubs. The R-joint rod ends combine the best qualities of low-friction movement, lateral stability, full-range articulation, and quiet operation into one special bearing that is as home on the street as it is on the racetrack.

Not Yet Reviewed

$8,130.00

Ridetech Bolt-on 4-link Systems

Ridetech Bolt-on 4-link systems provide a lowered ride height with smooth handling. They include the link bars with rubber bushings, powdercoated brackets, and optional front upper or lower controls arms, depending on the vehicle application. The suspension systems require no welding or cutting, making installation easy. Order the kit designed for fitment on your year/make/model.

4.75 out of 5 stars ( 8 )

$1,625.00

—

$2,895.00

Ridetech Narrowed 4-Link Axle Assemblies

If you have chosen a Ridetech 4-link system to improve the ride quality, handling, and braking of your classic muscle car, the next purchase should be a Ridetech Ford 9 in. housing and axle package with integrated 4-link and sway bar brackets. These narrowed 4-link axle assemblies allow for the easiest installation of your 4-link system. The 9 in. Ford housings are great foundations for putting torque to the pavement. They feature a webbed center section, internal gussets, thick wall tubes, and billet steel flanges (new-style Big Bearing/Torino). The pinion is offset 1/2 in. and the axle flange is offset 2 1/2 in. The narrowed axle widths satisfy mini-tub applications. Ridetech narrowed housing and axle packages are offered in two axle lengths and available raw or with a black powdercoat finish. Select the proper length and preferred finish for your project. Features and benefits: * Webbed center section with internal gusseting for added strength * 3 in. diameter, 1/4 in. thick wall tubes * 31-spline heat-treated 1541H custom alloy axles * High-quality Timken tapered bearings on axle as standard * Drain plug and jack pad * High-quality Grade 8 installation hardware--housing studs, T-bolts, nuts, and washers * 3rd member studs are pre-installed and ready to accept a third member

5.0 out of 5 stars ( 1 )

$1,975.00

—

$2,275.00

Ridetech Parallel 4-Link Systems

Ridetech parallel 4-link systems feature rubber bushings, heavy tubing, laser-cut bracketry, and a panhard bar to position the rear axle side to side in many applications. They avoid interference between the upper bars and the OEM gas tank. These systems are also slightly easier for the casual installer to visualize and install because there are fewer bar mounts to deal with--the frame brackets and axle brackets carry both upper and lower bars. The 4-link bars use .219 in. thick wall direct-threaded DOM tubing for maximum strength, and CNC laser-cut and folded .188 in. wall alloy steel bracketry for strength and accuracy.

5.0 out of 5 stars ( 4 )

$925.00

Ridetech Tru-turn Strongarms Packages

Ridetech Tru-turn Strongarms packages are upgraded control arm systems that include tubular Strongarms, tall ball joints, Delrin bushings, and tie rods. What can you expect from these systems? Resolved bump steer and camber gain issues. Your tires will lean into the turn, the bump steer is optimized to under 0.065 in. through 5 in. of suspension travel, and you have the clearance to run up to a 275mm tire. These packages are available for hundreds of vehicles; order the kit recommended for your application. Features: * Taller upper ball joints to increase camber gain * Integrates with OEM spindles * Centers the wheels in the wheelwell with increased caster settings * Includes upper and lower Strongarms, outer tie rods, and billet tie rod adjusters

5.0 out of 5 stars ( 2 )

$1,710.00

—

$1,775.00

Ridetech Stock Width 4-Link Axle Assemblies

If you have chosen a Ridetech 4-link system to improve the ride quality, handling, and braking of your classic muscle car, the next purchase should be a Ridetech Ford 9 in. housing and axle package with integrated 4-link and sway bar brackets. These stock 4-link axle assemblies allow for the easiest installation of your 4-link system. The 9 in. Ford housings are great foundations for putting torque to the pavement. They feature a webbed center section, internal gussets, thick wall tubes, and billet steel flanges (new-style Big Bearing/Torino). The pinion is offset 1/2 in. and the axle flange is offset 2 1/2 in. Ridetech stock housing and axle packages are offered in two axle lengths and available raw or with a black powdercoat finish. Select the proper length and preferred finish for your project. Features and benefits: * Webbed center section with internal gusseting for added strength * 3 in. diameter, 1/4 in. thick wall tubes * 31-spline heat-treated 1541H custom alloy axles * High-quality Timken tapered bearings on axle as standard * Drain plug and jack pad * High-quality Grade 8 installation hardware--housing studs, T-bolts, nuts, and washers * 3rd member studs are pre-installed and ready to accept a third member

Not Yet Reviewed

$1,975.00

—

$2,275.00

Ridetech Tru-turn Suspension Handling Packages

When demanding the most from your muscle car, Ridetech has the answers with Tru-turn suspension handling packages. Ridetech's revolutionary Strongarm control arms are high-strength, precision built units equipped with modified ball joints to correct caster and camber angles, reduce bump steer, and deliver better wheel placement. The lower control arms feature double-shear mounts for added strength and lowered shock mounts for more suspension travel. Combined with high-quality bushings to control deflection and stiction, these control arms provide enhanced steering feel and improved steering geometry. The Tru-turn system adds tall spindles and corrected steering linkages to complete the package; this helps to correct bump steer, improve Ackerman angles, and increase camber gain. The updated steering also allows the use of large, modern wheels without compromising handling or suspension travel. Bring your muscle car's steering into the 21st century with Ridetech's Tru-turn suspension handling packages, available for a broad range of applications.

Not Yet Reviewed

$3,350.00

Ridetech 1962-67 Chevy II/Nova Complete HQ Series Coilover Systems

Ridetech 1962-67 Chevy II/Nova complete HQ Series coilover systems include everything you need to upgrade your existing suspension and give your classic Chevy an aggressive lowered stance with modern drivability. Buying a complete suspension system takes the guesswork out of choosing the correct components that will work together for optimal performance. Ridetech has spent hours collecting data, finding a perfect spring rate and components for your vehicle's performance and ride quality. These Ridetech 1962-67 Chevy II/Nova coilover systems feature their HQ Series coilovers. They utilize an impact-forged aluminum body and monotube design to deliver excellent ride quality and handling, and allow fine-tuning via the rebound adjustment knob, located at the top of the shock for underhood access. Along with HQ coilovers, these Ridetech systems contain a front Tru-Turn systems with Strongarms, front MUSCLEBar, and bolt-on 4-link. Package contents and benefits: * Front upper and lower Strongarm tubular control arms with injection-molded Delrin bushings with 13 percent PTFE to reduce deflection and stiction * Strongarms can be adjusted from 3 degree positive caster to over 7 degree positive caster with the additional caster setting providing improved high-speed stability and steering feel * Bumpsteer reduced to .030 in. throughout 5 in. of suspension travel * Tall spindles induce more negative camber gain to maximize tire contact patch during cornering, and offers a 2 in. pin drop, allowing the use of longer shocks and increased suspension travel * Front MUSCLEBar sway bar reduces body roll and creates room for wider front tires * Rear 4-link greatly improves traction, handling, and ride quality, as well as suspension geometry with optimized roll center and adjustable anti-squat. * Four HQ Series coilovers

Not Yet Reviewed

$7,835.00

Ridetech Panhard Bars

Ridetech panhard bars are designed to eliminate side-to-side movement of the rear axle housing. They will keep your tires from hitting the wheelwells and causing damage to your vehicle or the air spring system. Ridetech panhard bars are manufactured from steel and are available in a powdercoated finish for maximum protection.

4.5 out of 5 stars ( 4 )

$440.00

Ridetech 1961-65 Falcon TruTurn Front Suspension Systems

Ridetech 1961-65 Falcon TruTurn front suspension systems will bring your classic into the 21st century. Designed to give your Falcon excellent handling along with a lifetime of enjoyment, the TruTurn System features optimized ball joint angles and the elimination of rubber bushings, ridding the system of bushing deflection and providing free suspension movement through the entire range of travel. The geometry has also been optimized for excellent handling, drivability, and minimal bump steer. Ridetech Falcon front suspension systems are available with pin spindles or hub spindles that offer the same geometry improvements as the pin style, but add the performance and simplicity of late model Mustang hubs and brakes. Choose the ideal kit for your Ford Falcon. Additional notes: * Bump steer reduced to less than 1/16 in. * Complete steering upgrade includes: draglink, pitman arm, idler arm, and idler arm mount * Zero to over 7 degrees of caster possible * Hub spindle kit includes MUSCLEBar sway bar * Can be used with Ridetech's coilovers or Shockwaves

Not Yet Reviewed

$3,885.00

26 Results Found For "end"