Availability
Having the proper suspension plays a big part in the outcome on the track--RideTech HQ Series Shockwave air shocks are just what you've been looking for to add that desired performance to your vehicle! They improve ride quality over steel springs and provide a huge range of tuning options. RideTech HQ Series Shockwave air shocks' mounting styles accommodate a wide variety of applications with more configuration options than ever before. They feature aluminum impact-forged construction for leak-free operation, and a monotube design for superior oil control, ride quality, and handling. You no longer have to settle for less when you have RideTech HQ Series Shockwave air shocks on your vehicle! Features include: * Adjustable ride height--lower and raise the vehicle quickly without sacrificing drivability or durability * For longevity, the air spring is made from same high-quality rubber that 18-wheelers use * Available in a wide range of stroke lengths * Easy and precise single rebound shock valving adjustment with 26 clicks * Large rubber external bump stop to prevent harsh bottoming out * 5/8 in. hardened shaft is precision ground and straightened to a tolerance of .001 in. for increased durability and performance * Billet end cap with integrated debris wiper to prevent seal damage * Oversized rod guide improves piston rod stability * Integral internal bump stop prevents extension crashing * Hard coat external anodizing for lasting beauty and performance * Teflon piston wiper and progressive valving provide consistent piston/bore contact for repeatable performance * Monotube bore is cathode anodized for wear resistance * Specially-contoured composite gas separator cup optimizes dead length and ensures proper nitrogen/oil separation * Long-lasting KEVLAR® -lined bearings allow wide articulation with low noise
( 2 )
$1,555.00
RideTech StrongArm suspension systems utilize an offset trailing arm with a "trussed" design which allows maximum tire width while providing the utmost in strength. The rear trailing arms have PTFE bearings, and the strut rods are outfitted with R-joint rod ends to combine the best qualities of low-friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is as home on the street as it is on the racetrack. When combined with the tubular rear crossmember, the trailing arms place the coilovers to the rear of the axle for better motion ratio and damping control while providing additional height adjustment via the movable lower coilover mounts. Features and benefits: * Lowers vehicle ride height * Mounting hardware to maintain ground and tire clearance, driveline angles, and load capacities * Bolt-on installation (no fabrication required) * Greatly improved handling performance * Ultimate ride quality
Not Yet Reviewed
$2,555.00
RideTech 1979-93 Mustang bolt-in SLA (Short-Long-Arm) front suspension systems replace the stock McPherson strut design with a billet aluminum upper control arm, tubular lower arm and spindles with S550 Mustang hubs. The factory strut design offers very little camber gain and poor overall geometry. This design greatly improves negative camber gain, which positions the tire perpendicular to the pavement through the corners without the need for excessive static camber and overly stiff spring rates. Caster, roll center and Ackerman angles were also optimized. These suspension systems are compatible with either Ridetech coilovers or Shockwave air suspension (sold separately). SLA front suspension systems are available in two fitment styles: * To fit STOCK K-Members (except 84-86 SVO) * To fit many AFTERMARKET K-Members, including Maximum Motorsports, Team Z, AJE and UPR Additional product features: * Incorporates an upper control arm to induce much-needed negative camber gain * Caster, roll center, bump steer and Ackerman angles are optimized * Bolt-in frame surrounds create attachment points for the upper control arms and the shocks. This keeps the load on the frame rails for maximum strength and reduced NVH * Upper and lower arms feature Delrin© bushings infused with PTFE to minimize stiction and eliminate the need for lubrication * Spindles include Moog S550 Mustang rear hubs for maximum strength, consistent braking and reduced maintenance * Lower control arm design improves tire clearance and steering angle 30 degrees with up to a 275mm wide tire Fitment: * Uses S550 (15-23) or SN95 (94-04) Mustang brake systems (caliper brackets sold separately) * 17 in. minimum wheel diameter * Compatible with stock and most aftermarket sway bars Specifications: * Negative camber gain: 1.25 degrees/in. * Positive caster: 7-9 degrees * Bump steer: under .050 in. * Lowers ride height: 1-2 in. * 50 lbs. lighter than stock suspension * Stock track width
( 1 )
$3,300.00
—
$3,650.00
RideTech Ford F-150 rear suspension lowering kits drops your truck up to 5.5 in. in the rear, turning your vehicle into a high performance muscle truck with better stance, handling, and ride quality. These RideTech kits are 100 percent bolt-on, fully adjustable, and include everything you need to lower the rear-end of your Ford F150 platform. Features, benefits, and contents: * Lowered stance -- Adjustable ride height--3 in. to 5 in. rear drop -- Improved ride quality and sharper handling * Adjustable Ridetech/Fox shocks -- Aluminum body -- Monotube/gas pressure -- Adjustable valving * Bolt-on installation -- No welding
Not Yet Reviewed
$1,160.00
Ride Tech rear coilover upgrade packages include everything needed to give your muscle car a lowered stance with dramatically improved handling and ride quality. The systems contains rear StrongArms and either single-adjustable HQ Series or triple-adjustable TQ Series coilover shocks. Component features: * Rear StrongArms--provide added strength to help get the power to the pavement. They utilize R-Joint Technology to provide smooth operation and reduce roll bind. Lower arms feature a double sheer mount for the coilovers locating them in place of the stock springs, keeping the load where it belongs. * HQ Series coilovers--impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling. * TQ Series coilovers--remote reservoir triple-adjustable shocks feature rebound adjustment along with dual stage (high-speed and low-speed) compression adjustment. High-speed adjustment allows tuning for impact harshness and low-speed adjustment allows tuning of cornering characteristics, perfect for use on the autocross, road course, and drag strip.
( 1 )
$1,410.00
—
$2,460.00
What are some of the virtues of a quality RideTech StreetGrip suspension system? For starters, they're easy to install. The Delrin bushings eliminate deflection, and dual-rate springs allow the vehicle to transition small road irregularities via a compliant spring rate. Adjustable monotube shocks deliver premium ride quality and handling performance, while the tall upper ball joints reposition the control arms to correct camber for more stability. Sway bar end links are also included to minimize body roll through corners. Give your vehicle the components it needs to handle the road with a StreetGrip suspension system—RideTech's one-box solution for better ride and control. Order the model designed for fitment on your vehicle.
( 1 )
$2,165.00
—
$3,295.00
RideTech offers suspension lowering systems to improve your vehicle's stance, handling, and ride quality. The kits include components that address your specific application, such as heavy-duty C-Notches, adjustable shock absorbers, brackets, coil springs, spindles, Grade 8 hardware, and more. The systems focus not only on lowering the vehicle, but also maintaining suspension geometry and alignment. Order the model recommended for your vehicle.
Not Yet Reviewed
$1,865.00
—
$3,540.00
RideTech offers rear lowering kits for a wide range of vehicles. They include all the necessary parts to drop the back end of your truck, such as leaf shackle hangers, axle brackets, and Delrin® leaf spring bushings. Order the rear lowering kit recommended for your specific application.
Not Yet Reviewed
$1,625.00
RideTech 1965-72 Ford complete bolt-on coilover suspension systems deliver the best handling for your classic truck—in a package that you can install yourself with hand tools and a little elbow grease. 1965-1979 FRONT SUSPENSION: * Removes bulky, heavy, poor handling twin I-beam suspension * Bolt-in cradle strengthens the front of the truck while providing structural mounts for front control arms; utilizes substantial "H" style design compared to other "I" style crossmembers. * Superb suspension geometry, built without compromise, vastly superior to adapted salvage yard "Crown-Vic suspension swaps" or "street rod style" / Mustang II front systems with optimized roll centers and anti-dive. * Delrin© bushings on upper and lower control arms provide smooth, squeak-free long life * Upper control arm cross-shaft allows for easy alignment and use of caster slugs * Adjustable steering stop on lower control arm * Utilizes RideTech tall "pin" spindle, which uses "AFX brake kits." Many brake kits (including Wilwood) are dual drilled for 5 x 4.5 in. or 5 x 4.75. lug pattern * Optional "Hub" spindles offer the same geometry improvements as the pin spindles but add the performance and simplicity of late model Mustang hubs and brakes. Includes S550 2015-23 Mustang hubs for maximum strength, consistent braking and reduced maintenance. Compatible with 2015-23 Mustang brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. Hubs fit Ford car 5 x 4.5 in. lug pattern and include 14mm studs. * Brake kit for the stock 5 x 5.5″ lug pattern with Ridetech pin spindle are available as well * Increased camber gain with tall spindle, 5-8 degrees caster for improved high-speed stability * 63.5 in. in front width (wheel mount surface to wheel mount surface); provides options for "traditional" offset wheel choices (4 in. narrower than Crown Vic) * Fits 14 in. and larger wheels. If using more than 4.5 in. of backspacing, 18 in. wheels are required * Motor mount "loops" connect cradle to frame rails to reinforce frame * Motor mount options for Modular Ford, Ford FE, and Small Block Ford, Chevy LS / Small Block / Big Block * Front sway bar measures 1.5 in. x .250 wall and provides confident cornering and smooth ride * Adjustable bump stops * Rack and pinion steering conversion with 15.5 in. center to center bushing mounts for 1979-93 Mustang-style steering rack * Includes billet adjustable tie rods * Bump steer has been virtually eliminated * Adaptable to stock steering column using kit 12319505; includes column adapter, U-Joint and shaft. * High-quality satin black powdercoat finish * Entire system saves approximately 130 lbs. from the front of the truck Rear 4-LINK SUSPENSION: * Removes factory leaf spring suspension and bracketry * Complete parallel 4-link with panhard and C-notches * Works with coilover or Shockwave air suspension * Includes R-Joints on all links for smooth, bind-free, quiet operation and long life * Optimized roll center and anti-squat (60 percent anti-dive) for amazing traction and elimination of wheel hop * High-quality satin black powdercoat finish * Reduces rear weight by 50 lbs. * 1965-1972: No bed modification needed * 1973-1979: Slight bed support rail modification needed (not visible from the top side of the truck * Compatible with short bed and long bed trucks * Adjustable coilover suspension system
Not Yet Reviewed
$8,610.00
RideTech 2019-25 Silverado/Sierra 1500 suspension lowering kits will turn your vehicle into a high performance muscle truck with a better stance, handling, and ride quality. Offered for 2WD and 4WD drivetrains and with Group B axle flip bracket, Ridetech lowering kits are 100 percent bolt-on and fully adjustable. Each kit includes front HQ Series coilovers, tubular upper control arms, rear HQ Series shocks, shock angle correction brackets, flip brackets, adjustable shackles, and heavy-duty hangers. Choose the proper kit for your truck. Component features and benefits: * Front HQ Series coilovers allow for a 1 to 3 in. lowered stance (2 in. optimal) and are a direct replacement for factory shock and spring. They utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine tuning of the ride quality and handling via the rebound adjustment knob with 24 positions of adjustment. Premium Hyperco springs are used that are CNC cold-wound with high-tensile steel. * Upper StrongArms correct the camber and ball joint angles to allow proper wheel alignment. They are fully assembled with ball joints and bushings and are powdercoated satin black. * Rear HQ Series shocks are also rebound adjustable and include brackets to correct the shock angle at the lowered stance more maximum effectiveness. * The rear 4 in. lowering kit includes axle flip brackets (Group B axle type), stout front leaf spring hangers, and adjustable shackles to fine-tune the stance. * Group B axle housing for: -- 12-bolt 9.76 in. axle (steel) has 12 cover bolts, magnetic differential housing -- 12-bolt AAM 9.50 in. axle (aluminum) has 12 cover bolts, non-magnetic differential housing * Optional components are available separately to help eliminate wheel hop, provide extra load capacity, and improve cornering.
Not Yet Reviewed
$3,315.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
