Availability
OTC Strut Tamer II Extreme spring compressors supply the strongest compression force—up to 4,000 lbs. to compress and rebuild large truck, SUV, and passenger car shock/strut assemblies. They also set a standard for safety, meeting the new ASME PASE safety standards for spring compressors. Safely compress the largest strut springs with OTC Strut Tamer II Extreme. They are available with or without stand. Features include: * Forged locking jaws includes larger pads and offset to clamp onto and compress springs even tighter than before * Extra-thick 5/8 in. compression arms for superior strength, stability, and safety * Locking trunions for optimal stability during spring compression * Arm-locking rings eliminate the need for tools to adjust * 2:1 reduction gearbox allows for a 2:1 torque compression increase when compressing struts * Spring capacity of 2 1/2 in. to 10 in. diameter; 1 1/4 in. to 24 in. vertical stroke * Stand with wheels for easy mobility in the shop (ST model only) * During compression, the stand's wheels lift off the floor, and four no-slip rubber pads keep the stand firmly in place
( 1 )
$1,541.99
—
$1,898.99
Stop searching for makeshift solutions for servicing vehicles equipped with press-in ball joints--everything required is laid out in these ball joint master kits by OTC Tools. With kits of this magnitude, finding the correct adapters and using them correctly is key to minimizing service time. These complete kits consist of 70+ adapters, a C-frame, and a guide that contains application charts and diagrams with step-by-step instructions.
Not Yet Reviewed
$1,332.99
Replace rusted and frozen heavy-duty suspension bushings faster and easier with the OTC Hendrickson rear suspension bushing tool kits. These suspension bushing tools are for use on heavy-duty vehicles to make Pivot and D-pin bushing removal and installation easier tasks. The tools patented design allows it to be mounted to the suspension piece, the weight of the tool does not need to be held in place during operation. Also included in these kits are centering adapters that align the bushing tool and reduce the likelihood of bushing damage or improper installation. Product features: * Patent-pending design is suspension-mounted, eliminating the need to hold the tool during operation * Remove and install Hendrickson Primaax EX, Comfort Air, FCCC V RideTM Pivot and D-Pin bushings * Saves time and effort during suspension service to get trucks back on the road faster * The included adapters align tool with the suspension to ensure proper bushing installation and reduce the chance of misalignment and bushing damage * Includes an OTC's 25-ton single acting cylinder
Not Yet Reviewed
$2,109.99
OTC Hub Grappler kits are the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. They eliminate unnecessary alignments or the use of a shop press, cutting service time dramatically. OTC Hub Grappler kits include six adapters that increases application coverage, a tie rod/ball joint tool, and two Ford axle installers. Features include: * Hub Grappler puller is specifically designed to apply maximum force with minimal effort from an impact gun * The jaws are designed and sized to properly fit hub applications and can be quickly located on the puller bar without the use of fasteners * A 3/4 in. custom drive screw coupled with a special equalizer washer provides smooth operation while the proprietary heat-treating extends its life 5 to 10 times longer than similar designs
( 3 )
$896.99
—
$1,954.99
OTC offers suspension bushing tools that are designed to remove and replace suspension bushings quickly, saving valuable time compared to traditional methods. The hydraulic cylinder and press plate assembly mounts to the suspension component or leaf spring for hands-free operation and eliminates the need to hold heavy equipment. These bushing tools are to be used in conjunction with OTC's bushing adapter sets (not included) to fit specific bushings and suspension components. Features and benefits: * Tool features: hydraulic cylinder, (2) press plates, and (2) puller legs * The hydraulic cylinder and press plate assembly mounts to the suspension component or leaf spring for hands-free operation and eliminates the need to hold heavy equipment * 25-ton capacity * Includes an OTC 25-ton single acting cylinder
Not Yet Reviewed
$1,368.99
OTC Hendrickson suspension bushing master kits for heavy-duty vehicles make pivot and D-pin bushing removal and installation easier tasks. Because the patented design allows the tool to be mounted to the suspension piece, the weight of the tool does not need to be held in place during operation. The kits also include centering adapters that align the tool and reduce the likelihood of bushing damage or improper installation. With the included OTC 25-ton cylinder, even bushings covered in road dirt and salt are easy to replace. These master kits feature an OTC Stinger Series air/hydraulic pump, with the needed hose and couplers to make it ready to use right out-of-the-box.
Not Yet Reviewed
$2,391.99
—
$2,532.99
OTC truck ball joint master service kits will save you the hassle of trying to find the right tool for the job. These 55+ piece adapter kits for press-in-ball joints and universal joints fit the majority of truck, van and SUV applications. These large kits come in two cases and include a comprehensive manual including diagrams with instructions. Experts will agree that ball joints are among the most important parts for safely driving a vehicle. Make certain to change them out correctly with OTC truck ball joint master service kits.
Not Yet Reviewed
$1,342.99
OTC Jeep/truck ball joint sets come with a complete set of adapters and special large C-frame to remove and install ball joints on many Chrysler/Dodge light-duty trucks, as well as Jeep Cherokee, Grand Cherokee, Wrangler, and Liberty vehicles. The high-clearance C-frame allows for the repair of the most recent vehicles, and each set is enclosed in a blow-molded case with application chart and instructions.
( 6 )
$652.99
The OTC Vanguard 2-stage electric pumps are ideal for a wide range of applications including clamping, bending, straightening, pressing, forming, testing, pushing, and pulling. They provide fast ram approach and return with a low-pressure, high-volume stage, and then automatically switch to a high-pressure, low-volume stage for high force requirements. This design allows for efficient performance in various hydraulic applications. These pumps are designed to be compact and easy to handle, making them convenient for various work environments. Product features: * Built with robust materials for long-lasting performance in demanding conditions * Fast-acting precision-built two-stage pumping unit consisting of a gear pump for the low-pressure stage and an axial-piston pump for the high-pressure stage * Delivers low volume at high-pressure yet provides high-volume at low-pressure for fast cylinder piston approach and return * Suitable for operation up to 10,000 psi * 2-stage hydraulic pump with 2-position/3-way valve * 6 ft. remote motor control
Not Yet Reviewed
$4,708.99
OTC's Hendrickson press tooling sets are designed to facilitate the removal and installation of bushings in Hendrickson heavy-duty suspension systems, specifically for front and rear suspensions. These Hendrickson press tooling sets are engineered to work with a hydraulic press and feature specialized adapters and press plates to ensure proper alignment and efficient bushing replacement without the risk of damaging the suspension components or requiring excessive force. When you need reliable tools for your job, you can depend on OTC tools to deliver. Key features and purposes: * These press tooling sets are for use with a 100-ton or larger hydraulic press * Streamlines the process of removing and installing bushings, saving time and effort compared to traditional methods * The press plate sits on the press bolster to provide a level, cradle-like surface for the beam to rest on during pressing * Proper alignment features and specialized adapters minimize the risk of damaging the suspension components during bushing replacement * Designed to be user-friendly, often with features like suspension-mounted designs that eliminate the need to hold the tool during operation, reducing physical strain * Different sets cater to specific bushing types and suspension configurations, like center and end bushings on 340 and 380/440 series, or bar pin bushings on equalizing beam suspensions
Not Yet Reviewed
$2,870.99
OTC engine load levelers are designed to hook to a crane or hoist to handle and position large pieces. OTC engine load levelers can be adjusted to compensate for off-center loads or be adjusted horizontally.
( 27 )
$2,799.99
OTC's Powertrain lifts feature a sliding split tabletop design that allows for separation of engine and transmission assembly or hybrid engine/generator module, making service easier. The lifts unique design also helps handle removal and installation of electric vehicle batteries, fuel tanks, suspension systems and other powertrain assemblies. A generous ground clearance allows for floor crane access, while a low collapsed height aids in servicing large components while still on the lift. The table is designed to tilt to help properly align components to the vehicle during installation and the threaded holes in the tabletop will accommodate future adapters and powertrains.
Not Yet Reviewed
$8,530.99
OTC 1,250 lb. capacity Powertrain lifts are ideal for engine and transaxle service. They offer your shop a compact design with swivel casters for easy maneuverability. OTC 1,250 lb. capacity Powertrain lifts are air/hydraulic operation and come with a 20.5 in. x 30.5 in. tilting plate and a height range of 29 1/2 in. to 68 1/2 in.
( 1 )
$3,619.99
These OTC motorcycle and ATV lift jacks will make it much easier to work in the garage. By allowing the handle to be lowered, the user will be able to walk around the lift. These low-profile OTC jacks are perfect for motorcycles with ground clearance issues. Additional features include: * 1,500 lb. capacity * Large 17 in. long skids * Foot pedal release * Locking rear casters * Automatic safety locks * Two ratcheting tie straps for safety
( 20 )
$372.99
OTC's upgraded 60-ton hollow center rams offers several benefits, particularly for push/pull applications in industries such as construction, mining, and heavy equipment maintenance. The updated 60-ton hydraulic hollow center cylinder has been engineered for increased strength and durability and meets the ASME B30.1 standards. A center-hole design is ideal for push/pull applications while allowing for the extension of cables, screws or wires through the cylinder. Tapped base mounting holes allow for easy installation in fixed applications. Whether it's a specialty tool that you need or a unique piece of service equipment, OTC Tools provides top solutions to modern automotive service challenges while increasing technicians' productivity and shop profits. Key features: * Durable construction with ability to handle demanding applications * The hollow center design allows users to thread cables, screws, or pulling rods straight through the ram, enabling both pushing and pulling actions—this versatility expands its use beyond simple pushing or lifting, allowing for tasks such as tensioning, load testing, or pulling apart components * Well-suited for situations where you need to apply both pushing and pulling forces, such as extracting or installing bushings, bearings, or other shaft components * Easy installation—the tapped base mounting holes enable convenient and secure installation in fixed applications * Engineered to meet ASME B30.1 standards, ensuring safety and reliability and can withstand full "dead-end" loads
Not Yet Reviewed
$3,048.99
These OTC puller sets will provide the ability to service a wide array of vehicles. From passenger cars to trucks, SUVs, commercial applications, and farm vehicles, OTC has you covered. OTC manufactures these puller sets out of quality materials to ensure performance and dependability. Sets contain: * Single stage hydraulic hand pump assembly * Pressure gauge * Hose half coupler with dust cap * 6 ft. hydraulic hose * 17 1/2-ton ram with threaded insert * 5-ton capacity 2/3-jaw puller * 17 1/2-ton capacity hydraulic push puller with 16 1/2 in. legs * 22 1/2 in. legs * 17 1/2-ton, 3-jaw Grip-O-Matic puller * 17 1/2-ton, 2-jaw puller head * 2 combination 2/3-jaw pullers * Shaft protector set * Step plate adapter set * Pulley pulling attachment * Internal threaded adapter set * Bearing cup pulling attachment * 3 bearing splitters * Speed crank * Tee adapter * Special puller forcing screw * Ram cap * Ram adjusting screw * Pushing adapter * Two 5/8-18 F x 3/8-16 M threaded adapters * Two 5/8-18 F x 1/2-20 M threaded adapters * Two 5/8-18 F x 1/2-13 M threaded adapters * Two 5/8-18 F x 5/8-13 M threaded adapters * Two 5/8-18 F x 3/4-16 M threaded adapters * Two 5/8-18 F x 3/4-10 M threaded adapters * Two 5/8-18 F x 7/8-14 M threaded adapters * Two 5/8-18 F x 7/8-9 M threaded adapters * Two 5/8-18 F x 1-14 M threaded adapters * 1 in.-8 F x 5/8-18 M threaded adapter * 1 in.-8 F x 1 -14 M threaded adapter * Two 5/8-18 F x 3/4-16 F threaded adapters
Not Yet Reviewed
$3,801.99
Versatile, easy-to-use OTC 27.5-ton under-axle hydraulic jacks feature a compact design that fits under many types of vehicles. Their self-retracting, Venturi vacuum power return system includes a long T-handle that lets you easily position the jack under rides with long overhangs. One pull of the handle activates the self-retracting ram without having to crawl underneath the automobile. Each jack contains a completely sealed piston, protected from dirt, dust, sand, and other damaging outside elements. OTC offers their 27.5-ton under-axle hydraulic jacks in an ideal size for safely lifting heavy-duty vehicles. Product features, items, and specs: * (2) 7.88 in. rubber-tired steel wheels for maneuverability and movement on most types of terrain * 3 in. diameter round saddle with a center notch (13 1/8 in. maximum height; 21 3/8 in. with large adapter) * (2) saddle attachments included for multiple height adjustments based on the vehicle being lifted * 4-position handle (48-3/4 in. length) includes a stow-away position, a near-vertical handle position, lowering lever, and air-chuck hook * Pneumatic release valve offers more precise release control without requiring the added step of a separate valve operation * Air pressure is 90 to 175 psi * Lifting range is 8 1/4 in. to 21 3/8 in. * Reach: 69.87 in. (footprint of 22 in. x 12 in.) * 4 1/2 in. (4.9375) cylinder stroke (4 1/4 in. extended screw length) * Meets all 5 ASME PASE-2019 safety standards for service jacks * Limited lifetime warranty
Not Yet Reviewed
$3,552.99
OTC engine stands are made from heavy-duty materials designed for servicing light truck and car engines. These engine stands have four adjustable mounts to fit most engine blocks and they make work easy with a 24 in. handle to rotate your engine 360 degrees. Fixed polyurethane back wheels and poly swivel castors on the front allow for smooth travel around the garage.
( 1 )
$744.99
OTC's 25-ton capacity ram with half coupler are commonly used in shop presses, for tasks like pressing rear axle bearings and piston pins, as well as for bending, straightening, and other maintenance operations. The hydraulic cylinder is used to apply force in various applications, particularly in situations requiring pushing, pulling, or lifting heavy loads. Product Overview: * Designed for applications where space is limited, and offers increased efficiency to handle tasks that would be difficult or impossible manually * Hydraulic operation—uses hydraulic pressure for powerful and controlled force application * Commonly used in shop presses to apply force for pressing, bending, and straightening, handles a wide range of heavy-duty applications like pressing rear axle bearings, straightening frames, or correcting rear housings and axles * Also useful in various maintenance and repair tasks where controlled force is needed * 25-Ton capacity—indicates the maximum force the ram can exert * Half coupler allows for connection to other hydraulic components or attachments * Threaded ram collar and base facilitates easy mounting connection to other equipment
Not Yet Reviewed
$1,719.99
OTC's tough, economical, 25-ton capacity hand jack presses offer several benefits for automotive and industrial applications. These presses are known for their robust construction, making them suitable for heavy-duty pressing tasks like removing and installing bearings, pins, and other components. They provide precise control over pressure, ensuring accurate results for various pressing operations. Additionally, the hand pump design allows for controlled and efficient application of force, while the adjustable press bed and open throat design enhance versatility and ease of use. Whether it's a specialty tool or unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians' productivity and shop profits. Key features: * Features heavy steel construction with a durable powdercoat finish * Ideal for pressing rear axle bearings, piston pins, and much more * Press comes complete with hydraulic hand pump, gauge, Tee and hose, hydraulic Ram with 6 1/4 in. stroke, and pump mounting bracket * Large 30 in. x 46 in. work area under ram makes positioning of even bulky work easy * Press bed is raised or lowered with a hand crank, allowing one-person set-up and operation * Unit stands 69 1/2 in. tall x 40 1/2 in. wide x 28 in. deep and occupies 56 1/2 in. x 36 in. of total floor space * Frame extension holes are on 4-inch centers
Not Yet Reviewed
$4,750.99
OTC 100-ton capacity heavy-duty shop presses are designed for a wide range of industrial and automotive applications, primarily for pressing, bending, and straightening metal components. Their high capacity allows them to handle large and heavy parts found in truck, construction, and agricultural equipment. OTC Tools offers these 100-ton heavy-duty shop presses in several versions, each model type listed below states specific features (per model). Please specify which OTC 100-ton heavy-duty shop press model you're interested in purchasing when placing order. Specific features of 100-ton heavy-duty shop presses (per model): * OTC No. 1857 model: includes single-acting ram with 10 in. stroke, hydraulic hand pump, gauge, hose and pump mounting bracket * OTC No. 1858 model: has all the same great features as their No. 1857 model, except has double-acting ram with 13 in. stroke, 3-phase, 220 V, 3,450 rpm electric/hydraulic pump and two hoses * OTC No. 1858-1P model: same as OTC Tools No. 1858 model, except it has a 2-stage, 1-phase hydraulic pump Featured highlights (per model): * 100-ton capacity allows handing large and heavy components * Designed for durability and to withstand full capacity loads * Wide openings between uprights allow for easy positioning of parts for pressing, bending and straightening metal components * Ram head glides smoothly on rollers for easy horizontal adjustments * Rugged press frame will withstand a full capacity load with the ram head in any position across the upper bolster * High capacity and adjustable bolster allows for a variety of maintenance and repair tasks in various industries * Depending on model selected, some feature a remote pump for easier operation and better visibility during pressing operation
( 2 )
$15,146.99
—
$25,009.99
Innovative, patent-pending OTC Tools car dollies clamp directly to pinch welds to prevent slippage during use. These independent units eliminate the need to adjust dolly width for different vehicle designs. They feature independently adjustable, threaded lift saddles with rubber pads to protect vehicle frames, and sturdy, easy-rolling casters--they're definite must-haves for any shop that does body and engine work. They provide easy movement of an FWD vehicle after the removal of the drivetrain. Features include: * Universal design for use on all vehicle types without additional adapters * 5 in. polypropylene casters * Each unit has a capacity of 1,800 lbs. (3,600 lbs., pair) * Lowered height of 9 in. * Raised height of 14 in. * May be used with or without tires on the vehicle
( 1 )
$494.99
OTC Tools' forklift jacks are designed with features like a low starting height, two-position lift pad, and a long handle for easy maneuverability, making them well-suited for various forklift configurations and workspace environments. For the right tools for the job, make OTC your #1 source. Key features include: * High-quality seals, chrome-plated internal components, and high-strength steel construction * Unique shape of primary saddle allows for handling of all lift truck configurations with flat or edged surfaces * Long handle stop makes for easy maneuverability * Complies with ASME-PALD * Secondary lifting surface feature * Stable base
Not Yet Reviewed
$2,108.99
OTC Back Buddy II brake drum dollies offer several benefits for mechanics working on heavy trucks and trailers. They allow for safe and easy removal, transport, servicing, and installation of brake drums and hub assemblies, eliminating the strain of manually lifting these heavy components. The tool's features, such as a fast-motion ratcheting jack and tilting mechanism, contribute to increased efficiency and precision during brake jobs. Other features of the OTC Back Buddy II brake drum dollies are a fold-down handle, pneumatic tires, and an onboard tool tray to enhance ease of use and maneuverability in the shop environment. Product Features: * Remove, transport, service, and install heavy truck brake drums and hub assemblies for increased workplace efficiency * Helps prevent back injuries and other musculoskeletal strain associated with lifting heavy brake drums * Fast-motion ratcheting jack with 14 in. of vertical lift * Tilting mechanism allows for precise alignment during installation, which is crucial for proper brake function and can prevent damage to seals and other components * Fold-down handle for open access to the work area * Onboard lube tray and toolbox * Pneumatic rear tires * An array of optional adapter sets (sold separately) are capable of grabbing almost any truck hub assembly or brake drum, inboard or outboard
Not Yet Reviewed
$3,103.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
