Availability
Shop our selection of low-priced parts entering their final lap on Summit Racing’s store shelves. Grab them now before they’re gone!
Shop our selection of low-priced parts entering their final lap on Summit Racing’s store shelves. Grab them now before they’re gone!
Shop our selection of low-priced parts entering their final lap on Summit Racing’s store shelves. Grab them now before they’re gone!
Showing In Stock Items. Show All 211 Items.
Clearance
VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.
( 52 )
$108.99
—
$148.99
$85.50
—
$104.50
Summit Bucks
Clearance
ACDelco new torque converters are GM OE replacements that offer the same performance, durability, and service life you've come to expect. With quality steel housings and internal components, ACDelco torque converters are sure to deliver the performance and fit needed for your vehicle.
( 1 )
$477.99
—
$568.99
$236.50
—
$314.50
Clearance
Street Rod torque converters from Hughes Performance are designed and manufactured for street rod enthusiasts needing a bit of an upgrade over their OE stock converters. These converters feature silicon brazing for strength, needle bearings for reliability, and stator modifications for more torque multiplication. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 116 )
$670.99
$594.50
Clearance
Hughes Performance Fuel Miser torque converters reduce the slippage in your transmission by 25 percent. The result is better fuel economy, more efficient shifts, and cooler transmission temperatures. They are designed to work with engines over 400 c.i.d. as well as with diesel applications. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 19 )
$545.99
$301.50
Clearance
Mopar Replacement torque converters are genuine OE replacement parts that deliver the proper fit and function, making your install easier and providing the performance you've come to expect. When it's time to servicing your Chrysler, Dodge, or Jeep, don't risk another minute by searching and buying something that may or may not work. Select the correct parts--genuine OE Mopar parts!
Not Yet Reviewed
$521.99
$336.50
Clearance
Wright Tool micro-adjustable torque wrenches are your "click-type" models offering rugged, easy-to-operate durability. They're crafted from alloy tool steel for long life accuracy and feature exposed scales. The wrenches are available in a wide variety of socket drive sizes and torque ranges. Choose the model that best suits your application needs. Wright torque wrenches—setting the standard for tightening nuts and bolts that clamp your parts together. Features also include: * Accuracy: ± 4 percent clockwise, ± 6 percent counterclockwise at 20 percent of the scale * Accuracy meets or exceeds all applicable government specifications * Positive lock with spring-loaded pull down lock ring * Super rugged knurled metal for industrial use * Pull lock ring down and turn handle to adjust reading * Positive locking device cannot be jarred into unlock position * All wrenches meet or exceed ANSI B 107.14M or GGG-S-686, whichever applies * Ratchet head models are 24-tooth industrial-grade * Some models feature a push-button socket "quick-release" mechanism (except 6448, 8447, and 8448) * All wrenches feature English scales primary and Newton meter secondary * Micrometer "clicker" torque wrenches feature a distinct breaking action when the set torque is reached; the breaking action and clicking noise is greatest at the upper part of the scale * All wrenches include a "Certificate of Calibration"
( 21 )
$222.99
—
$271.99
$170.50
—
$175.50
Clearance
Rusted, worn-out factory engine torque struts mounts won't be a problem--when you toss the aging original parts in favor of replacements from DEA Products. These mounts have been specifically designed to fit your vehicle without any modifications. They're manufactured from quality materials and offer a simple, bolt-in installation for your vehicle. DEA Products OEM engine torque strut mounts are available for passenger cars, trucks, and SUVs, keeping your engine mounted safely and securely for all types of driving conditions.
( 3 )
$13.99
—
$45.99
$8.50
—
$40.50
Clearance
Mopar Replacement torque bracket struts deliver reliable and safe performance. These genuine Mopar parts also offer the correct fit for an easier install. When you need authentic OE-quality repair parts to restore performance in your Chrysler, Dodge, or Plymouth, look to the OE-maker for replacement torque struts—Mopar!
Not Yet Reviewed
$174.99
—
$183.99
$70.50
—
$86.50
Clearance
Anchor Industries engine torque strut mounts are designed to fit, form, and function like the OEM pieces. These mounts prevent excessive engine and transmission vibration, reducing stress on the components and dampening noise.
( 23 )
$60.99
—
$61.99
$31.50
—
$43.50
Clearance
Street Master torque converters are designed for the driver who is looking for a competitive advantage. By raising the stall rpm, these converters will completely eliminate slow, sluggish starts. Recommended for stock to slightly modified engines for maximum performance, they'll allow the engine to idle smoothly when the car is in gear. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 r.p.m. lower.
( 235 )
$482.99
—
$1,009.99
$355.50
—
$745.50
Clearance
Since more vehicles every year have tight tolerances around the wheel nuts, the Milton torque bar extension kits will help eliminate damage to wheels when torqueing the wheel nuts. The 1/2 in. drive wheel torque extensions are designed to torque wheel nuts on most foreign and domestic cars and light trucks to the correct torque, the first time, every time, with your thin wall or regular lug nut sockets. Torque bar extensions are color-coded for quick identification and selection and come safely housed in plastic carrying case.
Not Yet Reviewed
$104.99
$74.50
Clearance
Yank Performance introduces its new line of Power Adder Series (PAS) converters. These are 9.5 in. billet converters based around the successful SS Series product line. This new line of converters is specifically designed for power adder cars with NOS, small turbo, or superchargers. These models will couple up quicker and multiply torque harder. They're rated to 650 RWHP. Order the model with bolt circle designed to fit your application. Additional details: * One-piece roller burnished flanged impeller hub * New Torrington bearings * Fully furnace brazed pump and impeller * Hardened input and turbine splines * Extra-wide oversized lockup clutch material to handle added abuse put down by more horsepower and torque
Not Yet Reviewed
$1,098.99
$879.50
Clearance
Rein Automotive premium OE-quality engine torque rods are vehicle-specific and direct replacements for the original component. Rein products provide you with the proper fit and performance for a variety of European vehicles, including Audi, BMW, Mercedes-Benz, Mini, Porsche, Saab, Volkswagen, and Volvo. Every part is manufactured with top-quality materials to ensure it has the same tolerances as the part that came on the car to provide ease of installation and long-lasting durability.
Not Yet Reviewed
$23.99
$16.50
Clearance
Max Torque clutch components are offered to service your clutches for optimal performance. They will fit and function just like the originals they are replacing. Whether you need a replacement drum, springs, washers, or snap rings, Max Torque components will keep you on track.
Not Yet Reviewed
$13.99
—
$21.99
$7.50
—
$13.50
Clearance
Max Torque Box Stock/Clone clutches was designed for the Clone engine market. They are very similar to the SS-Series clutch but are able to withstand the rigorous requirements of the Clone racing engine. They are offered in different chain sizes and sprocket tooth counts. Choose the proper Max Torque Box Stock/Clone clutch for your Kart.
Not Yet Reviewed
$116.99
$56.50
Clearance
Mate your Max Torque clutch with the proper Max Torque chain sprockets. These steel choices are available for all their clutches in several different tooth counts to fit your application needs.
Not Yet Reviewed
$25.99
—
$45.99
$18.50
—
$26.50
Clearance
Not sure which wheels to buy? You can't go wrong with our Vision American Muscle wheels for a perfect combination of performance, style, and value, including our Vision Wheels 143 Torque series gunmetal wheels. These wheels sport a 10-spoke design with a machined lip to give your ride outstanding visual appeal. But, don't let their appearance fool you--they're built to be rugged to hold their own, no matter how long your journey.
( 15 )
$229.99
$159.50
Clearance
Dick Cepek DC Torque wheels are specially designed for newer trucks and SUVs that require higher offsets, additional brake caliper clearance, and the ability to use factory tire pressure monitoring sensors. They're manufactured from one-piece cast aluminum and feature a flat black finish with machined accents and a tough satin clearcoat for ultimate protection. All wheels include a matching center cap and use a conical 60 degree lug nut. Available in 16 in. to 22 in. diameters, Dick Cepek DC Torque wheels are sure to give your truck or SUV an impressive look.
( 2 )
$222.99
$154.50
On Sale
Clearance
Seals-it torque tube seals prevent rear-end lube from traveling up the torque tube and leaking out the bell. The seals consist of aluminum housings with three O-rings on the outer diameter and two patented, grease-resistant, high-temperature seals on the inside. The housings are available in anodized colors and in four sizes to fit most open wheel race cars.
Not Yet Reviewed
$28.79
$19.50
Clearance
Top-quality Performance Tools ratcheting screwdriver bit sets are made of S2 alloy steel bits. They come with a beefy little cushion-grip handle, which is made of rubber, designed for comfort, and operates as a custom-fitted storage case. They feature a forward, reverse, and lock wheel mechanism to keep the bits in place.
Not Yet Reviewed
$9.99
$4.50
Clearance
If you like American Racing's popular Torq-Thrust wheels, then you'll love these American Racing AR105 M Torq-Thrust M anthracite wheels. These one-piece alloy wheels are available in an anthracite finish and feature the same 5-spoke design as the Torq-Thrust wheels. For wheels with classic looks and modern performance, pick up a set of American Racing Torq-Thrust M wheels.
( 20 )
$197.99
$136.50
Clearance
American Racing VN505 Torq-Thrust II polished wheels offer the timeless appeal of five rounded spokes and a mirror-like finish. The 2-piece cast aluminum rims are available in a variety of widths, diameters, bolt patterns, and other fitment options. Their retro look and modern performance will complement your car from Day 1.
Not Yet Reviewed
$411.99
—
$441.99
$218.50
—
$333.50
Clearance
If you like American Racing's Torq-Thrust D wheels, then you'll love these Classic Torq-Thrust II spinoffs! The 2-piece cast aluminum alloy rims are reminiscent of mag wheels that were so popular in the muscle car heyday. They feature a gray painted center, polished barrel, and the same rounded 5-spoke design as the Torq-Thrust Ds. These stylish wheels are available in a variety of widths, diameters, bolt patterns, and other fitment options.
( 5 )
$402.99
—
$621.99
$290.50
—
$476.50
Clearance
Titan high-torque ratcheting screwdrivers make it easier to drive in screws. They feature a reversible ratcheting design, stainless steel shaft, interchangeable bits, and bit storage on the handle.
Not Yet Reviewed
$6.99
$3.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
