Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Clearance
Shop our selection of low-priced parts entering their final lap on Summit Racing’s store shelves. Grab them now before they’re gone!
Shop our selection of low-priced parts entering their final lap on Summit Racing’s store shelves. Grab them now before they’re gone!
Shop our selection of low-priced parts entering their final lap on Summit Racing’s store shelves. Grab them now before they’re gone!
Showing In Stock Items. Show All 420 Items.
Clearance
LEED Brakes Brake Proportioning Valves
Add safety your brake system with LEED brake proportioning valves! These brass prop valves are equipped with a safety switch that's designed to sense when your brake system is producing unequal or lower pressure to one or more of the wheels—usually caused by a component failure. Without this valve installed, if a component fails on your vehicle, the brake pedal will drop to the floor as you pump the pedal, with little to no braking. Don't take chances! Order the LEED Brakes brake proportioning valves recommended for fitment on your application.
( 5 )
$99.99
—
$109.99
Clearance
Tuff Country Lift Blocks
Tuff Country lift blocks are a simple and economical solution to raising the rear end of many trucks and SUVs. The durable blocks are inserted between the factory axle and leaf spring to lift the rear end. Available as direct-fit or universal blocks, they fit a wide variety of vehicles.
( 15 )
$52.99
—
$181.99
Clearance
LEED Brakes Adjustable Brake Proportioning Valves
Eliminate premature rear wheel lockup with LEED Brakes adjustable brake proportioning valves. These aluminum units install in your rear brake line, after any distribution blocks, and allow you to reduce the amount of pressure going to the rear brakes. They will help eliminate any premature rear wheel lockup, as well as provide you with better control of your vehicle during hard braking. LEED proportioning valves are available in different inlet/outlet styles; order the model best suited for your vehicle application.
( 6 )
$64.99
Clearance
Mile Marker Pulley Blocks
Mile Marker pulley blocks are made to get you out of tough spaces. They will double the output of your winch and eliminate a lot of the friction that takes place while winching.
Not Yet Reviewed
$109.00
$65.50
Clearance
Tuff Country Steering Components
Tuff Country has you covered when it comes to steering components for your lifted vehicle. Pitman and steering arms are recommended for most vehicles lifted 4 in. and above. Some problems that these arms will help to correct are bump steer and a shortened turning radius.
( 7 )
$67.99
Clearance
ATK High Performance Chrysler 5.7 Gen III Hemi 400 HP Long Block Crate Engines
ATK High Performance Chrysler 5.7 Gen III Hemi 400 hp long block crate engines were built in a team effort with Comp Cams. Utilizing ATK remanufactured GEN III 5.7L Hemi engines; they upgraded the camshaft, springs, and pushrods to produce reliable 400+ hp. Features typically include: * Seasoned OE Gen III Hemi block * OE reground crankshaft * OE reconditioned connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic roller camshaft * Aluminum cylinder heads * OE shaft mount rocker arms
( 5 )
$4,798.99
$3,999.50
Clearance
SRP Big Block Chevy Small Dome Profile Pistons
SRP big block Chevy small dome profile pistons are designed to fit Edelbrock 110cc and GM Signature series heads. They're 4032 low-expansion, high-silicon aluminum alloy that's heat-treated to SRP specifications. CNC-machined domes with radiused valve reliefs provide optimum flame travel. They include a pin fitting, double Spiro locks, and a wall wrist pin. Their CNC-machined ring grooves accept 1/16, 1/16, 3/16 rings and their closed chamber accepts 5/64, 5/64, 3/16 rings. Pin upgrades are available.
Not Yet Reviewed
$149.99
$99.50
Clearance
SRP Big Block Chevy Flat Top/Inverted Dome Pistons
SRP big block Chevy flat top/inverted dome pistons are made from 4032 low-expansion, high-silicon aluminum alloy that is heat-treated to SRP specifications. Their ring land and crown thickness are specifically engineered for mild turbo, supercharged, and nitrous applications. They include a pin fitting, double Spiro locks, and a wall wrist pin. Their CNC-machined ring grooves accept 1/16, 1/16, 3/16 rings, which are sold separately. Pin upgrades are available.
Not Yet Reviewed
$699.99
$489.50
Clearance
ATK Marine Rebuilt Long Block Engines
ATK Marine Engines offers premium-quality rebuilt long block engines specifically for boating applications. These engines are designed to deliver maximum performance and long-term durability for your boat. Order the model recommended for your marine application. ATK Marine rebuilt engines include: * Special marine pistons and rings * Special marine camshaft * Marine gaskets * New intake and exhaust valves * New main, rod, and cam bearings * New valve lifters, rocker nuts, and swivels * Heavy-duty double roller timing chains * Cam sprocket * Crank gear * Freeze plugs
( 46 )
$2,973.99
—
$3,038.99
$1,819.50
—
$1,872.50
Clearance
SRP Ford Small Block Flat Top Pistons
SRP Ford small block flat top pistons fit Ford, TFS, GT40, Canfield, Brodix Track I, OE, and Dart Windsor cylinder heads. They're made from 4032 low-expansion, high-silicon aluminum alloy that's heat-treated to SRP specifications. Their CNC-machined ring grooves accept 1/16, 1/16, 3/16 in. piston rings that are sold separately, and a wrist pin is included. These flat top models are available with two or three valve reliefs, as well as a variety of bores, strokes, and rod lengths. Choose the factory-style replacements designed for fitment in your vehicle application—sold individually or in a set of 8.
Not Yet Reviewed
$149.99
—
$699.99
$69.50
—
$489.50
Clearance
ACDelco GM Genuine Parts Manual Transmission Block Rings
ACDelco GM Genuine Parts manual transmission blocking rings are GM-recommended replacement components for your manual drivetrain. These quality OE-replacement rings provide the same fit, performance, durability, and service life you expect from General Motors. Order the ACDelco GM Genuine Parts manual transmission block ring to fit your application.
Not Yet Reviewed
$89.99
$59.50
Clearance
SRP Ford Small Block Dish Top Pistons
SRP Ford small block dish top pistons fit Ford, TFS, GT40, Canfield, Brodix Track I, OE, and Dart Windsor cylinder head applications. They're made from 4032 low-expansion, high-silicon aluminum alloy that's heat-treated to SRP specifications. A wrist pin is included and their CNC-machined ring grooves accept 1/16, 1/16, 3/16 in. piston rings, which are sold separately. These dish top models are available in a variety of bores, strokes, and rod lengths for fitment on specific vehicles--sold individually or in a set of 8.
Not Yet Reviewed
$149.99
$69.50
Clearance
StealthMounts Tool Mount Spacer Blocks
StealthMounts' tool mount spacer blocks are used in conjunction with their tool mounts to provide additional clearance for belt clips and hooks, allowing the mounting of slightly more awkward shaped tool skins with oversized belt hooks. The spacers are made with extremely durable injection molded ABS plastic with countersunk screw holes to allow for firm mounting. StealthMounts spacer blocks fit together for easy storage and are stackable.
Not Yet Reviewed
$19.95
$9.50
Clearance
Summit Racing™ Stage 1 Intake Manifolds
Our Summit Racing™ Stage 1 intake manifolds are the perfect performance upgrades for your engine. The intake manifolds feature a high-flow runner design to deliver improved power from idle to 6,000 rpm. These cast-aluminum manifolds are pressure-tested for leaks. Chevrolet manifolds will clear HEI ignition systems.
( 233 )
$260.99
$199.50
Clearance
Patriot Full-Length Headers
Patriot full-length chassis and fenderwell headers provide the ultimate in performance for street rods and musclecars with high performance engines. The key is their use of long primary tubes, which results in more horsepower and torque than those from the competition. Other features include a close fit with the engine block for maximum chassis and steering clearance, mandrel-bent tubing, and new gaskets and bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Finishes available are: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing
( 187 )
$341.50
$239.50
Clearance
RHS Cylinder Head Parts Kits
These RHS cylinder head parts kits have been assembled with the finest premium components to provide your engine with optimal airflow for maximum engine performance. Features include: * 21-4N stainless steel intake and exhaust valves * COMP Cams valve springs, retainers, and locks * Hardened rocker arm studs for use with roller rocker arms * Pushrod guideplates * Valve seals
( 1 )
$197.95
—
$237.95
$139.50
—
$169.50
Clearance
AFR 195cc SBC Enforcer Cylinder Heads
AFR 195cc SBC Enforcer Cylinder heads feature their Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners and combustion chambers that allows for extremely accurate and repeatable port location/performance. These budget-friendly heads are perfect for your 350 to 400 cu. in. operating below 6,000 rpm. They come fully assembled with the identical components found in their higher end CNC-ported cylinder heads, such as ARP rockers studs, PAC Racing springs, Viton® valve seals, AFR adjustable guide plates, machined bead valve locks, hardened spring cups and ductile iron seats, and their one piece 8mm 21 4N stainless steel valves. The AFR 195cc SBC Enforcer cylinder heads are available in straight or angle plug, assembled or bare.
( 22 )
$417.00
$289.50
Clearance
Made For You Bowtie Wire Looms
Made For You Bowtie wire looms are molded from 6-6 Zytel nylon that is guaranteed not to fade, distort, stain, or discolor under normal use. They're designed specifically for 1987 and later Chevy center-bolt valve covers. They feature a unique Bowtie design that mounts to the center of your valve covers, and not only adds style but securely holds your plug wires, too. The looms contain Bowtie wire holders, molded nylon wire separators, and stainless steel mounting hardware. Their innovative design creates a neat, professional, custom look while keeping your plug wires out of high-heat areas.
( 3 )
$68.95
$49.50
Clearance
Flatout Gaskets Intake Gaskets
Flatout Gaskets makes a broad line of quality intake gaskets from premium materials so that they can handle the stresses of high performance applications. Don't take chances with inferior gaskets on your next performance buildup. Trust Flatout gaskets to seal up right the first time.
( 31 )
$19.99
—
$57.99
$19.50
—
$40.50
Clearance
Tuff Stuff Performance Supercool Water Pumps
Tuff Stuff Performance Supercool water pumps create 30 percent more flow to help cool engines under abnormal conditions. Ideal for race applications, these pumps are made from high-quality materials, such as aluminum and iron, and are available in a variety of finishes. Options include short and long style; standard and high-volume flow; clockwise and counterclockwise rotation; and different pilot diameters. Whether you're replacing or upgrading, there's a Supercool water pump for your specific vehicle.
( 438 )
$386.99
$212.50
Clearance
Ross Racing Forged Pistons
Ross Racing pistons are forged from 2618-T61 aluminum alloy and come standard with many great features, including: * Forced piston-pin oilers * Double Spirolox pin retainers * Valve pockets engineered for oversized valves and modern high-lift cams * Fully CNC-machined skirts to deal with high heat and side loadings * Radiused domes (on most applications) * Balanced to +/- 2.5 grams * Aircraft-quality pins Hundreds of models are available, with bore, stroke, rod length, and piston style options to best suit your replacement or upgrade needs. Order the set compatible with your vehicle and engine application.
( 26 )
$101.99
—
$811.99
$69.50
—
$710.50
Clearance
Dove Degree Bushings
Dove Manufacturing offers a variety of parts for high performance and racing equipment applications. These camshaft degree timing chain bushings are machined from steel in sizes ranging from 0 to 8 degrees. The bushings accurately position camshafts in the block to ensure correct relationship or phasing with the crankshaft. They're available for many year/make and engine applications from the 1950s and up. Order the degree bushings individually or in a set of 5.
Not Yet Reviewed
$8.99
$4.50
—
$6.50
Clearance
Stef's External Oil Pumps
Stef's external oil pumps' superior design and ability provide a smooth and consistent flow of oil, improving the pumps' overall performance, especially at higher engine speeds. They are available for a wide range of applications and can be fitted to match your engine requirements for greater volume and/or pressure, and that in turn results in more horsepower! When it comes to something as important as oil pressure, insist on Stef's oil pumps!
Not Yet Reviewed
$1,504.99
$1,102.50
Clearance
Pro Shocks Street Rod Coilover Springs
Pro Shocks street rod coilover springs are specifically designed for use with Pro Shocks coilover shocks. They're available in various spring ratings to suit your application needs. Offered in tapered styles as well, these street rod coilover springs have a durable chrome exterior finish to help maintain strength, allowing the springs to perform better and longer and look good doing it!
Not Yet Reviewed
$96.99
$57.50
