Availability
Clearance
With a split 5-spoke upper layered design, Platinum Luxury 435 Flux satin black wheels provide a unique dual-layered style. These cast aluminum rims feature 10 thick spokes with cast-in gussets, branded center caps, and satin black with a satin clearcoat finish.
( 3 )
$167.99
$98.50
Clearance
Noram offers GE clutches for a variety of karting applications. They are 4-cycle clutches with 3/4 in. bores, to run inboard or outboard. The clutches are available in different tooth counts for #35 or #219 chain size, with heavy or light shoes. Additional features: * Stamped drum provides stable and consistent run out * Long-lasting heat-treated shoes * Variety of settings to fine-tune to track layouts * Flexibility of engagement with variety of springs * Economical maintenance
Not Yet Reviewed
$142.99
—
$144.99
$58.50
—
$99.50
Clearance
No one will need to ask, "Which way to the North Pole?" with these Candy Cane Direction signs in your yard. The pair directs visitors to the Elf Village and Santa's Workshop. They will add a festive look to your outdoor wonderland, sparkling in 2D style with 35 bright LED lights in each.
Not Yet Reviewed
$64.99
$54.50
Clearance
Noram offers GE Ultimate clutches for a variety of karting applications. They are 4-cycle clutches with a 3/4 in. bore, to run inboard or outboard. Models are available to run with #35 or #219 chain. Product details: * Stamped drum with venting holes for max airflow and cooling * Alternate shoe configurations conform to unique driving skills * Variable torque settings dramatically decrease slippage * Replaceable sprockets eliminate frequent drum replacement * Thrust bearings for an exceptionally smooth performance * High tech linings provide maximum coefficient of friction * Light shoe type
Not Yet Reviewed
$126.99
—
$135.99
$87.50
—
$93.50
Clearance
Alloy USA Grande rear axle shafts are constructed of high tensile strength 4140 chromoly that's heat treated, tempered and induction hardened. All this produces an axle that's up to 35 percent stronger than stock 1040 axles. Grande axle shafts include everything you need for installation. Alloy USA has all your high performance axle shaft needs covered.
Not Yet Reviewed
$169.99
$99.50
Clearance
Noram offers Stinger clutches for a variety of karting applications. They are 4-cycle clutches with a 3/4 in. bore, for running inboard or outboard. Stingers are available with a billet or stamped drum; different tooth quantities; and different chain sizes. Notes: * Billet drums may not be legal in series running the Briggs Racing LO206 U.S rule set. * Stamped drum required by 206 Briggs & Stratton rule set.
( 2 )
$144.99
$98.50
—
$99.50
Clearance
Max Torque Box Stock/Clone clutches was designed for the Clone engine market. They are very similar to the SS-Series clutch but are able to withstand the rigorous requirements of the Clone racing engine. They are offered in different chain sizes and sprocket tooth counts. Choose the proper Max Torque Box Stock/Clone clutch for your Kart.
Not Yet Reviewed
$79.99
—
$116.99
$56.50
Clearance
Raceline Wheels 156C Surge chrome wheels deliver a solid 6-spoke design constructed from heavy-duty A356 aluminum finished in a beautiful chrome. The spokes feature scalloped ridges, adding detail and providing additional wheel strength. Additional features include: * Flush face spoke design accentuates wheel diameter * Snap-in cap with contrasting embossed Raceline logo * Available in 18 in. to 22 in. diameters * Passes or exceeds all DOT standard load ratings
Not Yet Reviewed
$355.00
$99.50
Clearance
Get a perfect fit and dependable performance with Motive Gear OEM replacement axle shafts! They are made from top-quality steel and available for a wide range of applications.
( 7 )
$126.99
$82.50
Clearance
SVL Drivetrain differential carrier rebuild kits contain the parts you need for a complete rebuild—including spider and side gears, cross shaft bolt and pin, thrust washers, and more (depending on kit). A rebuild can avoid premature failure in your differential case. These kits are available for a broad range of car, truck, and Jeep applications from 1968 and up.
Not Yet Reviewed
$120.99
$72.50
Clearance
Winters 10-spline quick-change gears are machined from top-quality SAE 8620 steel and heat-treated for strength. Winters offers a wide selection of these quick-change gears to meet the ratios that you want.
( 13 )
$118.99
$78.50
Clearance
Flaming River offers a variety of low-profile single or double-joint needle-bearing chromoly U-joints. These steering components are designed and manufactured to outlast pin-and-block universal joints in racing applications. They have a reduced diameter for vehicles where clearance and weight are primary concerns, and they do not require lubrication. Order the style, size, and finish you prefer. Features include: * Black oxide finish for corrosion resistance * 400 ft./lbs. strength rating * Accommodates up to a 35 degree angle for the single joint and up to 80 degrees for the double
( 22 )
$117.99
—
$158.99
$85.50
—
$96.50
Clearance
Sunex Tools universal impact sockets are manufactured out of the highest quality materials. For over 35 years, Sunex Tools has developed and manufactured innovative tools that serve the automotive aftermarket, as well as the industrial and commercial segments. Whether you're in a shop or your garage, Sunex Tools universal impact sockets are tools that you can depend on.
( 7 )
$123.99
$86.50
Clearance
Lisle's 8-gallon oil drain lift replacement jugs are a specially shaped, translucent jug with a wide working range from 35 in. to 70 in. and a reinforced base that will not warp with hot oil. The jugs' lower center of gravity increases stability; and four 2 1/2 in. ball bearing wheels swivel and roll easily. They also feature a heavy-duty adjustment clamp, large handle and big pour spout with threaded cap. A large 15 in. funnel has a strainer built-in to catch drain plugs, and the base of the funnel measures 1 3/4 in. wide.
( 1 )
$102.99
$63.50
Clearance
The Mr. Heater tabletop patio heaters are ideal for outdoor spaces. They heat up to 275 square feet and produces an adjustable output of 8,000 to 11,000 BTU's. At an assembled height of 35 inches, the heaters can easily be picked up and moved to different outdoor areas to fit your needs. With built-in safety features such as a tip-over switch and a steel wire guard, enjoy up to 2 hours of trouble-free use by connecting a 1-lb. propane cylinder that fits inside of the base of the heater and turn the dial to your desired high or low heat setting. Keep warm and stay comfortable with these Mr. Heater table top patio heaters.
Not Yet Reviewed
$145.99
$74.50
Summit Bucks
Clearance
Rancho RS5000 steering stabilizers reduce steering shimmy, improve tire control, and give you more control over your vehicle if a tire should blow out. The single stabilizers protect front-end suspensions and are used with tires up to 35 in. tall. Dual stabilizers are for off-roaders with tires 35 in. and taller.
( 134 )
$109.99
$75.50
Clearance
Nitro Gear and Axle direct-fit axle shafts are offered in 1541H steel or 4340 alloy (chromium and molybdenum—aka, chromoly). Steel axles are heat-treated carbon steel with 41 percent or less impurities. They provide tensile strength of 181,000 psi, which equals up to a 35 percent increase in strength over stock. Chromoly axles are a lower carbon steel with a minimum 10 percent chromium and tensile strength of 228,000 psi. Both axles take more punishment to get you further down the trail—or off it entirely. Make your vehicle "Nitro Tough" with the Nitro Gear and Axle direct-fit axle shaft(s) designed for your specific application. Features: * CNC precision machining and heat-treating processes ensure excellent fitment and overall strength * Heat treatment applied after splines are cut, allowing for deeper penetration where strength is needed
Not Yet Reviewed
$179.99
$89.50
Clearance
Strange Engineering magnetic pick up collars are used in conjunction with data acquisition systems to provide driveshaft speed information. They are designed to fit on the pinion yoke of a rear end, the collars are available for either 28 or 35 spline models.
( 2 )
$64.99
$53.50
Clearance
When you need to replace your axle shafts, upgrade to Performance rear axle shafts from Alloy USA. The people at Alloy USA combine the best of engineering and manufacturing using 1541H or 4140 steel, depending on the application, to produce shafts strong enough to support your sense of adventure and keep you moving with confidence. These rear axle shafts are heat-treated and induction-hardened to have twice the tensile strength of stock and are up to 35 percent stronger overall due to the utilization of the latest cold spline technology. Why upgrade? The cost is same or less than OEM replacement, but the big reason is that horsepower is useless if you can't get it to the ground. Alloy USA Performance rear axle shafts will help you get dialed in for the maximum power connection, both on the road and off.
( 17 )
$141.99
$86.50
Clearance
Give your Jeep some new drums to beat--fit your Jeep with OMIX-ADA brake drums. OMIX-ADA knows Jeeps and they have the components to keep you stopping safely. Whether you choose front or rear, vintage or classic, OMIX-ADA brake drums keep the rhythm of your Jeep smooth.
( 1 )
$99.99
$50.50
Clearance
Tuff Country EZ-Ride suspension lift kits increase fender clearance and allow for larger tires, while their EZ-Ride technology maintains a great ride. All Tuff Country EZ-Ride lift kits are of the finest quality and are engineered for simple installation at an affordable price. Most kits bolt-on, require no cutting or drilling, and are available for a wide range of vehicles in a choice of lift heights. New shocks are not required on most installations. Features of Tuff Country EZ-Ride suspension lift kits, depending on the application, may include: * Spacers mounted above the OEM coil springs/struts * Rear add-a-leafs added to the existing leaf springs * Rear cast iron lift blocks mounted below the OE leaf springs * Re-indexed factory torsion bars--without "cranking up" * Control arms that retain proper suspension geometry * Control arms with PTFE-lined FK Uni-ball joints * Dropped pitman arm and/or track bar relocating bracket(s) for proper alignment * Extended radius arms to improve articulation * Replacement radius arms that eliminate the need to drop radius arms--with no loss of ground clearance * Axle pivot brackets with camber adjustment * Transfer case drop kit * Polyurethane spring bushings * PTFE pads in leaf springs to eliminate squeaking * Tapered, snub-rolled, and pre-set leaf springs * Application-specific hardware and U-bolts
( 73 )
$221.99
$61.50
Clearance
GSP new CV axle assemblies are engineered to provide OE fit, form, and function. Premium materials, coupled with precise machining and balancing, ensure smooth, vibration-free performance in all driving conditions. All axles are thoroughly inspected for quality and workmanship. Additional attributes of GSP new CV axle assemblies include: * Since boot failure is the main cause of CV axle failure, GSP axles use only premium-grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity * Assembled with a specially formulated, high-temperature moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
( 86 )
$139.99
$55.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
