Availability
Clearance
USA Standard Gear ring and pinion and differential combos save time and money by including everything you need in one simple part number. Quick Kits feature a USA Standard ring and pinion gear set, Master Install Kit with high-quality Koyo bearings, and required small parts to get vehicles back on the road quickly. The gear and install kits include axle bearings and seals. Many of these combo kits include Dura Grip differentials, depending on application. Order the USA Standard Gear ring and pinion gear and differential combo designed to fit your application.
( 4 )
$1,928.99
$1,019.50
Clearance
Weld Racing RT-S forged aluminum polished wheels feature 3-piece forgings that are assembled by welding, for application flexibility. They are manufactured using primary forging-grade aluminum alloys to create maximum strength and durability. Weld Racing RT-S forged aluminum polished wheels are available in 15 in. to 18 in. diameters and are tested with F.E.A. and in-house destructive testing to ensure safety.
( 17 )
$1,215.00
—
$1,375.00
$1,017.50
—
$1,133.50
Clearance
Weld Racing RT-S S71 forged aluminum black anodized wheels feature 3-piece forgings that are assembled by welding, for application flexibility. They are manufactured using primary forging-grade aluminum alloys to create maximum strength and durability. Weld Racing RT-S forged wheels are available in 15 in. to 18 in. diameters and are tested with F.E.A. and in-house destructive testing to ensure safety.
( 102 )
$1,289.00
$1,070.50
On Sale
Clearance
Auburn Gear Select-A-Loc differentials maximize your vehicle's traction with on-the-go system engage. These electronically controlled traction-enhancing differentials are selectable lockers offering the traction control of a limited-slip differential and a full-locking differential--all in one! When locker switch is off, the clutch pack activates the limited-slip mode. As torque increases, the separating forces within the differential gears increase, causing the clutch pack to be compressed, in turn providing bias torque to the highest traction wheel. When the locker switch is turned on, electronic current is sent to the electromagnetic coil which locks the axles together. Auburn Gear Select-A-Loc lockers feature a unique cone-clutch design with gearing made from aircraft-quality 9310 heat-treated billet steel for tough-as-nails strength. The lockers operate quietly without any shift fork or pins to line up to change the locker mode. With a limited-slip mode for on/off-road excitement and a true locker mode for the quarter-mile or nasty off-road terrain, Auburn Gear Select-A-Loc differentials deliver superior traction capabilities on the street, at the track, or off-road.
( 10 )
$1,289.99
—
$1,377.99
$1,006.50
—
$1,056.50
Clearance
Go big with Turbonetics mid-frame turbochargers! These are the absolute largest units with T4 flange featuring their ceramic ball bearing as standard equipment. The bearing system will meet and exceed your needs of high horsepower at the track or on the street, as well as ensure extreme durability and robust performance. Support your big power with Turbonetics mid-frame turbochargers.
Not Yet Reviewed
$2,957.01
$1,479.50
Clearance
Build a bulletproof third member using these Strange Ultra cases. They require larger-than-OEM components and are therefore offered in these unique packages. The cases include: * Pinion support body * Pinion bearings and cups * Pinion bolts * Pinion depth shims * Pinion seal * Pinion nut * Side bearings and cups * Premium ring gear bolts * Tail bearing * Tail bearing retaining plate * Your choice of a 3.250 in., 3.812 in., or 4.000 in. bore diameter
Not Yet Reviewed
$1,763.99
$1,446.50
Clearance
Summit Racing™ precision cast cylinder heads are made from tough A-356 aluminum alloy and feature Permanent Mold "As-Cast" technology. Port accuracy is unrivaled--meaning CNC porting is not required to provide superior flow. The result is CNC-ported performance at a fraction of the price! We start with precision CNC-finished faces and bolt holes for accuracy and fitment. American craftsmen expertly size and install the manganese bronze valve guides and interlocking ductile iron seats before finishing with a competition-grade valve job. From there, the decks are given a final pass for superior finish. They are finish-assembled in the USA with top-quality components like PAC Racing springs, fasteners, one-piece 21 4N stainless valves, machined locks, Viton® seals and chromoly steel retainers. The final result is the performance you want and Summit Racing™ quality you TRUST!
( 14 )
$1,999.99
$1,499.50
Clearance
Strange Engineering's stainless steel brake kits are designed for drag racing's most abusive applications, offering drag racers a safer and more efficient alternative to conventional carbon steel brakes. Strange's Dynamic Drive Mount (DDM) system secures the stainless rotor with an internal Spirolox--eliminating all thermally generated stress from rotor attachment points and further reducing rotating weight. The system also permits the hat and rotor to expand and contract independently, allowing for thermal expansion, which drastically reduces warping, coning, and cracking. Strange Evolution Dynamic Drive Mount brake kits feature Evolution S DDM stainless steel rotors machined from premium stainless billets, proprietary heat treated, and fully ground. The kits also contain Evolution 4 calipers, high performance metallic or semi-metallic brake pads, additional components, and hardware. Together they produce more efficient accelerating and stopping of your drag racing vehicle. Kits are available for front or rear. Choose those designed for your vehicle. Evolution S DDM rotors: * Mounts to billet aluminum DDM hat reducing rotating weight * Exhibits 48 percent greater yield strength at 1,000 degrees F compared to carbon steel, further maintaining rotor integrity * Highly resistant to heat and corrosion * Unique Aero Slot design reduces rotating weight and promotes even heat dissipation, compared to common round drilled holes * Scalloped design further reduces rotating weight 4-piston billet Evolution 4 calipers: * Computer finite element analysis (FEA) optimized and field-tested caliper -- Design improves piston retraction, pedal feel, and stiffness -- Results in improved pad wear and exemplary braking efficiency * High-retraction piston and O-ring design to eliminate drag during acceleration * Stainless steel pistons mitigate heat transfer to brake fluid * Reverse dish pressure vessel piston maximizes stiffness * All 1.750 in. pistons provide increased clamping force * Type II black anodized finish resists corrosion, heat, and brake fluid Aluminum caliper mounts: * Billet one piece design * Eliminates bolts, spacers, and nuts that require periodic maintenance Brake pads: * DTC-30 semi-metallic brake pads -- Available in rear or front kits -- Provides the best starting line cold holding power -- Recommended for vehicles going 150 mph or less in the 1/4 mile * DRM-35 metallic brake pad -- Available in rear kits only -- Provides high resistance to brake fade -- Recommended for vehicles going over 150 mph in the 1/4 mile -- Maintains decent starting line cold holding capabilities -- May leave pad residue on rotors when not using parachute -- While common, it's recommended to remove when installing new pads Housing end stud kits: * Rear kits * Provides additional components not supplied in most aftermarket kits Screw-in wheel studs: * Front kits * Tapered Allen 1/2 in.-20 x 2 1/2 in. Billet aluminum hubs: * Front kits * Strong lightweight material * Lightening holes for enhanced weight reduction * Billet hub caps with O-rings and Strange branding * Bearings, races, and seals
Not Yet Reviewed
$1,593.99
$1,307.50
Clearance
Sometimes constraints become the catalyst for an art form. With Unplugged Performance's Ascension front facia systems, their approach to the design entailed the creation of a new high-performance car image, but to do so in harmony with the Tesla Model 3's groundbreaking engineering. The Ascension front fascia systems are complete bolt-on replacement solutions designed to replace the Tesla Model 3 front fascia (front bumper cover). They are crafted from an impact-resistant, proprietary blend polymer. Included in the box is a front bumper cover with under panel continuity, and all related hardware to facilitate an easy installation. There are no additional parts needed to purchase for a complete and seamless factory-style bolt-on installation.
Not Yet Reviewed
$1,995.99
$1,396.50
Clearance
Fox Racing Shox Truck 2.5 Factory Race Series coilover reservoir kits will allow you to experience precise control and race-proven performance. Ready to bolt-on to your truck or SUV, these kits provide a pair of performer coilovers with remote reservoirs and hardware. Select the model recommended for your vehicle. Features of Fox Factory Race coilver kits for trucks may include: * 2.5 in. smooth bore zinc plated seamless steel body * Zinc plated and double clearcoated for long lasting finish * 2.5 in. smooth bore and honed seamless alloy reservoir * Black anodized, CNC-machined 6061-T6 billet aluminum components * Application specific, adjustable 3.0 Eibach racing springs * 7/8 in. hard chrome plated steel shafts * 6061-T6 hard-anodized, high flow aluminum piston * Application specific valving to maximize performance * Redundant sealing pack system main seal, wiper seal, scraper seal * JM92 Advanced Suspension Fluid for improved performance at variable temperatures * PTFE-lined, heat-treated, alloy steel spherical bearing * Direct replacement for stock and aftermarket lifts kits * Ride height preload ring adjustments
Not Yet Reviewed
$1,749.95
$1,499.50
Clearance
Classic Performance TCI leaf spring conversion kits are designed to upgrade the rear suspension of a classic vehicle, which improves its ride quality, handling, and stance. These kits lower the vehicle for a more aggressive look, enhance comfort by using modern leaf spring designs, like parabolic springs, and provide more durable and reliable suspension support. Many kits are designed as a true bolt-in solution, requiring no cutting or modification to the vehicle's bed or frame, making installation easier. Select the leaf spring conversion kit designed for your application.
Not Yet Reviewed
$1,169.99
$1,048.50
On Sale
Clearance
Summit Racing™ forged crankshafts offer maximum strength and the best value for your dollar! Our crankshafts are non-twist forged from certified 4340 steel. They are put through several stages of heat-treatment, and then stress-relieved and shot-peened to provide the strength and reliability you demand for your high performance application. Each journal is micro-polished and a .125 in. radius is used for increased strength. Summit Racing™ forged crankshafts help you get the most in value and performance.
( 10 )
$1,229.99
$1,149.50
Clearance
Yukon Gear & Axle ring and pinion sets are strong but quiet performers. Designed to handle some of the harshest conditions, these sets utilize the latest design and manufacturing technologies to afford you a smooth running gear that's durable and easy to set up. Yukon ring and pinions are available in hundreds of size, ratio, and axle model options. Whether you're on the street, off-road, or at the track, you'll experience unrivaled power and gear performance. Order the model recommended for your application.
( 173 )
$1,600.99
$1,339.50
Clearance
Kooks Headers race long tube headers will deliver high performance to your racer. Their full-length race headers are built from T-304 stainless steel and are available in several primary tube and collector diameters to match your application needs. Optimize scavenging and increase power with top-quality Kooks race long tube headers.
( 64 )
$1,956.75
$1,413.50
Clearance
TurboXS front mount intercoolers give you the massive flow and cooling that you need for your turbo to achieve peak performance. They dwarf the factory intercooler core, offering more than 3 times the volume. Not only is their bar and plate core larger, they're also less restrictive at high-flow rates, resulting in superior cooling and performance. Unlike other aftermarket front mount intercoolers, they allow you to keep factory features and fitment. If you're in the market to increase the performance of your turbo, there's no better way to do it than with TurboXS front mount intercoolers!
Not Yet Reviewed
$1,478.87
$1,109.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
