Availability
Showing In Stock Items. Show All 14 Items.
Clearance
Replace your watercraft's OE distributor with a Sierra Marine YLM Series model. These are modern, high performance magnetic breaker-less upgrades. Their complete, self-contained ignition system combines the triggering device and amplifier into a single unit that sits inside the distributor housing. The self-contained module/pickup assembly has no moving parts to wear out, making YLM superior to many other designs. Their time-tested breaker-less ignition circuit and surface-mounted, thermal-clad construction provide reliability in harsh marine environments. Designed for 12 V negative-ground systems, YLM distributors improve combustion efficiency and spark plug life, provide accurate timing, and have a simple wiring hookup for easy installation. They're designed to work with both OE and aftermarket coils, so you're sure to find the combination you need. Order the model recommended for your marine make and engine application.
( 1 )
$584.99
$354.50
Clearance
ACDelco remanufactured starters are 100 percent performance-tested to ensure the ability to start your engine. They're engineered to fit your vehicle and built to provide the same performance, durability, and service life you've come to expect—at a great value! Damaged and obsolete parts are replaced, and the units receive 100 percent new bearings, bushings, and brushes for the ultimate in reliability. Over a thousand models are available; order the starter recommended for your vehicle. Don't wait until a weak, aging starter fails completely; install an ACDelco product … and turn the key with confidence!
( 54 )
$71.99
—
$250.99
$44.50
—
$201.50
Clearance
Astemo offers remanufactured starters for a wide range of vehicles, especially many import models. These stock replacements are refurbished to OE specifications for performance and longevity. They're also an economical choice. Astemo's quality control and attention to detail make their parts the go-to choice for many car manufacturers and restoration shops. Order the remanufactured starter recommended for your application.
Not Yet Reviewed
$183.99
$82.50
Clearance
Denso remanufactured starters are subjected to a rigorous test and replacement routine that produces the lowest return rates in the replacement aftermarket. And every starter is exactingly bench-tested to ensure factory-original performance. Remanufactured components offer tremendous value, and by recycling valuable parts and precious raw materials, they're the environmentally responsible choice as well. Denso First Time Fit remanufactured starters are the ideal choice. Key features and benefits of Denso remanufactured starters include: * Solenoid coil 100 percent voltage tested. * All terminal bolts replated or replaced with copper to ensure a clean source of electrical current * Commutator polished, gauged, and performance tested * Housing re-tapped to OE standards and damage-checked for heat warping, corrosion, or improper surface alignment; then refinished * Pinion gear inspected and replaced as needed to meet engineering specifications * Field coil inspected and high-voltage tested * Armature cleaned and high-voltage tested to ensure reliable performance * All-new bearings, brushes, and seals * Maximum cranking torque under all conditions * Designed to start in extreme cold and hot weather conditions
( 20 )
$155.99
—
$259.99
$110.50
—
$129.50
Clearance
Motorcraft starters are offered new and remanufactured to fit your needs--and your budget. Their new models match the original OE starter at the time of assembly, while the remanufactured ones include new OE parts, and are tested to ensure performance. Both versions include the latest engineering enhancements, and are designed to provide 50,000 cranks. Built for your Ford, Lincoln, and Mercury vehicles, Motorcraft starters supply the right fit, an easier installation, and peace of mind that these are the perfect replacements designed specifically for your vehicle.
( 3 )
$137.99
$101.50
Clearance
Bosch remanufactured starter motors are built for extreme heat, cold, and high demand. Every engine starter component is 100 percent factory-tested prior to and during remanufacturing to assure it meets or exceeds OE specs. Additional notes on Bosch Professional Preferred remanufactured starters: * Each unit is remanufactured, not rebuilt * Includes the highest quality of materials and the most technologically advanced processes * Offers premium starting performance * All shaft splines and load-bearing surfaces are lubricated with OE high-temperature grade * Armature continuity is tested, gauged, straightened, and shimmed
( 14 )
$100.99
—
$265.99
$84.50
—
$223.50
Clearance
For over 40 years, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative to new replacement parts. It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot--Cardone is your source for the highest quality remanufactured parts. Through "reverse-engineering" failed parts, their engineers see where, and why, they failed. They reengineer their remanufactured products, where applicable, to reinforce failure-prone areas for longer-lasting performance. Cardone remanufactured parts cost up to 50 percent less than new--especially true with late-model, high-tech products. Cardone restores used auto parts back to their original fit and function, using only about 20 percent of the energy and raw material needed to build a new part; so you not only save money, but you also help save our planet. Features of Cardone remanufactured distributors include: * All electronic module components are 100 percent computer-tested to ensure full functionality * Automated test equipment verifies signal strength, correct polarity of wire harness, air gap, and crank reluctor tooth size, as well as ignition coil and pickup performance * Cardone uses the right gear hardness for the appropriate application: if the gear is too hard, it will damage the cam; if it's too soft, the gear itself will be damaged, potentially causing severe engine damage (many offshore manufacturers use only one gear hardness) * OE components with consistently high failure rates are 100 percent replaced or repaired to meet or exceed OE performance * Precise machining tolerances prevent oil leakage, poor timing, the setting of the "Check Engine" light, and premature failure
( 101 )
$191.99
—
$292.99
$99.50
—
$219.50
Clearance
The camshaft position sensor monitors the rotating position of the camshaft relative to the crankshaft position. This data is sent to the vehicle's ECU, where it is used to adjust the spark timing and the operation of the fuel injectors. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts camshaft position sensor line has superior coverage for domestic and import applications.
( 2 )
$14.99
—
$31.99
$8.50
—
$22.50
Clearance
URO Parts offers ABS speed sensors for countless import vehicles. The wheel speed sensors are a type of tachometer that measures the rotational speed of a wheel and passes it to your car's engine control module. These replacements are made from high-quality materials to resist heat and ozone, maximizing durability and vibration absorption. Their OE-style design supports factory anti-lock brake sensor function. Fitment is guaranteed, backed by a 24-month unlimited mileage warranty from URO. Order the model recommended for your application.
Not Yet Reviewed
$4.99
—
$20.99
$3.50
—
$13.50
Clearance
The crankshaft position sensor is an electronic device that monitors the position and/or rotational speed of the crankshaft, then communicates with the vehicle's ECU to control ignition timing and fuel injection parameters. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts crankshaft position Sensor line has superior coverage for domestic and import applications.
( 1 )
$13.99
—
$65.99
$9.50
—
$49.50
Clearance
Astemo offers vehicle speed sensors for a wide range of vehicles, particularly many import models. These stock replacements are built to OEM specifications for performance and longevity. The speed sensor detects a gear or target wheel in the automatic transmission and generates an electric digital signal proportional to the speed of rotation. The transmission controls use this information to modify various transmission functions such as shift points and perform diagnostic tests. Astemo's quality control and attention to detail make their parts the go-to choice for many car manufacturers. Order the vehicle speed sensor model recommended for your application.
Not Yet Reviewed
$57.99
$46.50
Clearance
These Standard Motor Products replacement crankshaft position sensors are designed to send a signal to the ECM to determine engine rpm, crankshaft position, and engine misfire. They consist of a permanent magnet, yoke, and coil. The Standard Motor Products replacement crankshaft position sensors are mounted close to a tooth gear. As each tooth moves by the sensor, AC voltage pulses are inducted into the coil. Each tooth produces a pulse; as the gear rotates faster, there are more pulses produced. The ECM then determines the speed at which the component is revolving, based on the number of pulses. Therefore, the number of pulses in one second is the signal frequency. If you're experiencing crankshaft position sensor failure, try one of these Standard Motor Products replacement crankshaft position sensors.
( 26 )
$72.99
$56.50
Clearance
Denso crankshaft positioning sensors detect crankshaft rotation during the engine-combustion cycle. Denso produces both magnetic resistant element (MRE) type and magnetic pick-up (MPU) type sensors. Features and benefits of Denso crankshaft positioning sensors include: * Denso MRE sensors have a pair of MREs on an integrated circuit (IC) chip; this unique design is extremely accurate, even just after an engine is started * The molded IC chip is installed inside a cylindrical magnet so it is positioned closer to the gears that rotate with the crankshaft--a design almost 10 times more sensitive than Hall element type sensors * Denso uses a polyphenylene sulfide resin coating over the molded IC chip and cylindrical magnet for greater strength and superior resistance to substances like fuel, engine oil, and emission byproducts
Not Yet Reviewed
$34.99
$24.50
Clearance
OMIX-ADA checks the pulse of your Jeep's braking with their ABS wheel speed sensors. Offering an OE-fit and function, these sensors will detect differences in tire rotation, letting your ABS system engage when needed to control braking. OMIX-ADA ABS wheel speed sensors will help maintain safe braking in your Jeep.
Not Yet Reviewed
$29.99
$13.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
