Availability
Showing In Stock Items. Show All 18 Items.
Clearance
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 8 )
$42.99
$19.50
Clearance
PAC Racing 1500 Series valve springs feature an industry-leading nitriding process that enables the material to withstand the abusive, wear, and fatigue of the typical endurance engine environment. They arrive fully prepared for racing with chamfering, polishing, and the latest surface-enhancement technology available. From 24 hours of LeMans, to the rigors of NASCAR--PAC Racing 1500 Series valve springs have the storied history to thrive in challenging environments.
Not Yet Reviewed
$43.99
$19.50
Clearance
These Summit Racing™ hypereutectic pistons are made with 16-18 percent silicon and a T5 heat treatment for greater strength, as well as scuff and seizure resistance. They have a diamond-finished crown and piston skirt that is manufactured to exacting tolerances.
Not Yet Reviewed
$24.99
$12.99
Clearance
Mast solid stainless steel valves are the necessary premium hardware to complete your cylinder head build. These racing exhaust valves are designed with lightweight solid stems. You'll gain superior valvetrain stability with Mast Motorsports stainless steel exhaust valves. Order the length and diameter needed for your vehicle and engine application.
Not Yet Reviewed
$28.49
$14.50
Clearance
Ross Racing Type 2 tool steel wrist pins are the ultimate high-strength wrist pins you've been looking for. They are 20 percent stronger than common H-11 tool steel and their lightweight design makes them perfect for high-revving engines. Specifically designed for full-floating pistons, Ross Racing Type 2 tool wrist pins are sure to provide reliability and durability for your high performance engine.
Not Yet Reviewed
$42.99
$11.50
Clearance
Total Seal Classic street and race piston ring sets are ideal for street and mild racing applications with 10.5:1 and lower compression ratios. Each set starts with Total Seal's cast iron conventional top rings, and features cast iron second rings and 3-piece standard-tension stainless steel oil rings. Order the Classic street and race piston set to meet your application needs.
( 1 )
$60.53
$19.50
Clearance
Ross Racing Type 1 chromoly wrist pins will keep your connecting rods in place. They are manufactured from aircraft-quality chromoly. Ross Racing Type 1 chromoly wrist pins are heat-treated and end-ground to work in full floating or press fit applications. Available in standard or chamfered designs for spiral locks, Ross Racing Type 1 chromoly wrist pins are the perfect choice for your performance engine.
( 3 )
$15.99
$10.50
Clearance
ACL direct replacement rod bearing sets are affordable, high-quality bearings expertly made from premium materials and engineered to match your exact requirements. They are offered in the Aluglide and Duraglide Series of bearings in numerous sizes, including standard, and covering a vast range of automotive gas engines, as well as diesel applications. Select the set desired for your build. ACL Aluglide bi-metal bearings are designed with a proprietary composition of aluminum, tin, and silicon combined with a steel backing to provide exceptional wear resistance, outstanding strength, and excellent load-carrying characteristics. ACL Duraglide bearings feature a tri-metal (copper/lead/alloy) design that provides a combination of high strength and the ability to withstand harsh/demanding operating conditions above casual driving, making them ideal for performance engines and rebuilds.
( 1 )
$21.99
—
$33.99
$10.50
—
$17.50
Clearance
ACL direct replacement main bearing sets include their Aluglide and Duraglide Series of bearings in numerous sizes, including standard, and covering a vast range of automotive gas engines, as well as diesel applications. ACL Aluglide bearings are designed with a proprietary composition of aluminum, tin, and silicon combined with a steel backing to provide exceptional wear resistance, outstanding strength, and excellent load-carrying characteristics. ACL Duraglide bearings feature a tri-metal (copper/lead/alloy) design that provides a combination of high strength and the ability to withstand harsh/demanding operating conditions above casual driving, making them ideal for performance engines and rebuilds. Affordable, high-quality engine bearings expertly made from premium materials and engineered to match your exact requirements, ACL main bearing sets. Select the set designed for your engine.
( 1 )
$21.99
—
$36.99
$10.50
—
$19.50
Clearance
If you're building up a Dart block and want the best bearings with the correct sizing, then you'll want Dart cam bearings. They're fully grooved, made from steel-backed babbit, and specifically designed for high performance use. To all of this, Dart adds their own moly-PTFE coating for even better performance and durability. This coating is approximately 0.0005 in. thick, which translates into 0.001 in. less overall clearance.
( 34 )
$25.19
$19.50
Clearance
PRW Pro Series stainless steel rocker arms are manufactured from lightweight, premium quality 17-4ph stainless steel—a superior alloy high in nickel and chromium. This rigid, premium material provides outstanding fatigue resistance, and high-yield strength to help resist deflection. These rocker arms feature full-cage, friction-reducing needle bearings, and extra-large trunnions to spread out the load and reduce wear. Each rocker body is hand-polished, assembled, and carefully inspected to deliver the finest quality available to the racing and performance industry. Reduce your valvetrain mass with durable, lightweight PRW Pro Series stainless steel rocker arms. Order the set recommended for your specific vehicle and engine size. Features, items, and specs: * Wide assortment of ratios to suit almost any cam profile * Each set of 16 comes complete with PRW RockerLocs * Stud-mount design provides plenty of clearance for large diameter springs * CNC-machined pushrod cups * Heat-treated steel nose rollers and shafts resist severity of racing and minimize scrubbing
( 9 )
$25.04
—
$27.99
$19.50
Clearance
Whether it's a car, truck, motorcycle, marine, or performance racing application—properly sealing the piston to the engine block is a requirement. Hastings premium ductile ring sets do just that, and they're offered in many different options to fit virtually any piston. If the engine you're working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. These premium ductile piston ring sets are great for rebuilds or new builds, daily drivers or performance vehicles. Order the sizes needed for your project.
( 139 )
$16.99
—
$29.99
$10.50
—
$19.50
Clearance
If you're looking for pistons with an unbeatable combination of performance and value, then Speed-Pro hypereutectic pistons are for you. These pistons are manufactured from aluminum alloy that contains 16 percent silicon for greater strength and wear resistance. They're also molded in the latest permanent-mold technology to ensure the precise fit and tight bore clearances that today's top engine builders demand. Hypereutectic pistons are ideal for use in high performance street, bracket, and oval track racing—and will work perfectly with normal ring end gaps. Choose the model designed for your vehicle and engine application.
( 334 )
$35.99
$19.50
Clearance
Whether it's a car, truck, motorcycle, marine, or performance racing—properly sealing the piston to the engine block is a requirement. Hastings Piston ring sets do just that, while being offered in many different options to fit virtually any piston out there. If the engine your working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. Hasting piston ring sets are great for rebuilds or new builds. Hastings has been manufacturing piston rings since 1915 and they have not spent a second developing anything but piston rings. Trust the professionals at Hastings and use them on your next job.
( 118 )
$15.99
—
$45.99
$11.50
—
$19.50
Clearance
These Extreme Black Severe Application valves by Howards Cams are engineered for high-rpm and high-horsepower applications. They feature a gloss black nitride finish and are perfect for high temperatures (they run cooler, which improves valve life), nitrous, turbo, and supercharger applications. These valves will give naturally aspirated motors a much greater cylinder flow for good horsepower gains. These valves start off as a one-piece forged high-temperature, high-nickel, stainless steel alloy. They're CNC-finished to strict tolerances, making them the choice for the most demanding race classes. Their black nitride micro-hardness is higher than the stainless steel base material. No process can match it for surface hardness! The surface finish is smoother than with chromed stems, having less friction between the stem and the guide. The black nitride reduces power loss due to there being less valve-guide friction. Their nitride finish is not a coating--it's a process whereby it actually becomes part of the steel, making them ideal for the most demanding applications.
Not Yet Reviewed
$19.99
$12.50
Clearance
Trend Performance is an industry standard in high performance valvetrain technology and a leader in pushrod manufacturing. Manufactured in house, Trend pushrods are one-piece, centerless-ground 4130 chrome molybdenum pieces available with range of wall thicknesses, tube diameters, and lengths. They are pre-formed and centerless ground. Trend's stocking pushrods are designed for use in oval track race cars, drag race cars, hot rods, sport compacts, and marine applications. They are manufactured with 5/16 in. ball/ball ends and are available in lengths of 6.00 in. to 11.55 in. in increments of .025 in. The ball ends are machined to a tolerance of plus or minus .001 in. and the pushrods are laser-etched with the part number and specifications on a black oxide finish.
( 5 )
$26.01
—
$26.11
$16.50
—
$19.50
Clearance
Mahle Original piston ring sets are designed to be installer-friendly. They are pre-lapped to seat immediately, virtually eliminating break-in time. Ring materials and coatings, as well as ring tension, are all optimized for reduced friction and extended life in each application. The compression rings feature a barrel-faced contact area for more efficient compression and CNC-controlled gap chamfer to optimize compression and reduce blow-by. Intermediate rings have a reverse twist design for better groove side sealing, and taper race machining to enhance contact. The CP-20 oil ring assemblies feature a 20 degree ear angle, an exclusive feature that provides the best possible side seal against the cylinder wall, and a special chemical polish on the oil ring expander offers enhanced oil drain back. Mahle Original piston ring sets provide unmatched quality and ease of installation, making them the rings of choice for today's engine builders.
( 53 )
$30.99
$18.50
Clearance
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 163 )
$23.99
$11.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
