Availability
Clearance
You don't have to suffer constant carburetor issues in your hot rod or race car anymore. K&N Electronic Carburetor Injection (ECI) are self-tuning bolt-on systems that add a supplemental fuel source to optimize engine performance. And, since they are supplemental systems, you can tap into your current fuel supply and there is no need to run a return line back to your fuel tank. Users have the option to set detailed parameters, including their desired air-to-fuel ratio, injector pulse width, shot volume, progressive injector firing, and minimum/maximum rpm range. The brain of K&N's ECI systems is the ECU, which vigilantly monitors the input from the oxygen sensor to ensure an optimal air-to-fuel ratio is maintained. If the system detects an AFR higher than the user-defined limit, the injector will fire. Unlike a typical electronic fuel injection system, the ECI works cooperatively with your existing carburetor, supporting the fuel flow rates that high-horsepower vehicles require to operate efficiently. If your engine is performing lean, K&N's ECI systems will help make up for the fuel deficit. The kits include everything you need to get started: * Billet aluminum carburetor plate with fuel rail and gaskets * Fuel injector * Oxygen sensor * Injection-molded ECU * Fittings and hardware * Wiring harness Features: * Throttle linkage is unaltered from existing setup * Low-profile plate doesn't add much height under the hood * ECU is weatherproof and small enough to be mounted just about anywhere * ECI wiring harness comes with all connections pre-terminated and each connector is unique, so it only fits one way * Harness is pre-wrapped in wire loom for a seamless look with your existing vehicle wiring harnesses * Installation and tuning are easy
Not Yet Reviewed
$1,134.99
$492.50
Clearance
Restore proper engine function with Dorman throttle bodies. These electronic assemblies will maintain the correct volume of airflow into your engine. Each of these units features a butterfly valve, which is electronically controlled by the ECU to precisely open and close for the correct regulation of the fuel/air mixture. Many feature cast aluminum housings with an exact fit for an easy installation. Dorman throttle bodies offer durable, reliable performance that is essential to the operation of your engine.
( 16 )
$167.99
—
$297.99
$115.50
—
$179.50
Clearance
Need a fuel tank? There's only one place to get exactly what you need: Tanks Inc.! They offer a large variety of polyethylene, stainless steel, mild steel, and alloy coated steel reproduction gas tanks in applications set up to fuel many popular vehicles and even a few that are not-so-popular. So, whatever you desire to fit a tank to, be it a street rod, muscle car, classic truck, or that special ride, Tanks Inc. fuel tanks deliver the best quality and fit, blended with their knowledge and expertise, to power your project successfully. NOTE: These are standard stock replacement tanks for carbureted engine applications. If you have retrofitted your engine for electronic fuel injection, please see the Tanks Inc. EFI-Ready Fuel Tank options.
( 403 )
$293.99
—
$306.99
$205.50
—
$224.50
On Sale
Clearance
Restore proper engine function with Standard Motor TechSmart throttle bodies. These electronic assemblies will maintain the correct volume of airflow into your engine. Each of these units features a butterfly valve, which is electronically controlled by the ECU to precisely open and close for the correct regulation of the fuel/air mixture. Many feature cast aluminum housings with an exact fit for an easy installation. Standard Motor TechSmart throttle bodies offer durable, reliable performance that have made Standard Motor Products an industry leader for more than 95 years.
( 10 )
$135.99
—
$241.99
$110.50
—
$207.50
Clearance
Air filters are essential for the safe and efficient operation of gas and diesel engines. The engines, depending on performance level, suck up a lot of air per hour along with dust and other foreign particles which not only affect engine performance, but can also damage the entire engine and its electronic components. Hengst air filters protect engines and electronic components by cleaning the intake air efficiently and reliably. They permanently remove foreign particles from intake air and maintain safe and long-lasting engine performance. Plus, Hengst air filters ensure optimum fuel-air mixture levels, thus ensuring the best possible combustion. Allow your engine to breathe; clean the air for your engine with a Hengst air filter. Choose the one designed for your vehicle.
( 7 )
$11.99
—
$230.99
$5.50
—
$164.50
Clearance
Pure Energy remanufactured turbochargers are built to the strictest quality standards, implementing design enhancements that improve durability, efficiency, and power. These stringent testing and evaluation processes assure proper performance and reliability standards are met. Pure Energy turbochargers are supported by a free tech support hotline, staffed by ASE certified master technicians with access to extensive vehicle-specific repair data. Quality enhancements include: * Precise dual plane balancing of turbine shaft and compressor wheel eliminates high-speed vibrations, premature shaft and bushing/bearing failures, and assures quick spool up * New OEM design or upgraded CHRA (Center Housing Rotating Assembly) internal components assure reliability and durability * Thrust plates, seating rings, and journal bearings are strategically designed to withstand internal oil pressure and improve lubrication * Electronic and pneumatic actuator function is tested, calibrated, and adjusted for proper pressure relief and boost functions * Mechanical fastener and tolerance verification—all critical points are measured, gauges, torques, and witness marked * Assembly line and end-of-line testing--multi-computer and mechanical test operations monitor the turbo performance
Not Yet Reviewed
$658.99
—
$1,144.99
$479.50
—
$699.50
Clearance
The throttle body is an essential part of the inlet air stream of a modern gasoline engine. In combination with the electronic throttle control system, the throttle body assembly is designed to control the amount of fresh air entering the engine. A faulty throttle body can cause a check engine light, poor fuel economy, engine hesitation, and excess emissions. Key features of Bosch OE-replacement throttle bodies include: * Actual OE product * Plug and play—no flash update needed * Exact fit, form, and function * Manufactured worldwide on OE production lines * Includes an actuator, a throttle plate, and a throttle position sensor (potentiometer) integrated into one housing
Not Yet Reviewed
$85.99
$70.50
Clearance
The major advantage of AFIS FRT fuel injectors is their reaction time. Their superiority lies in the introduction of a new electronic solenoid within the injector body that controls the pintle. The diminutive pintle receives its signal from the ECU and—by opening and closing the FRT injectors faster—delivers a crisper, more precise, and better atomized charge of fuel. These injectors operate with either aftermarket or OEM electronic control units. AFIS FRT fuel injectors rated at 48 lbs. and up are flow-matched to plus or minus 1 percent for accuracy. Choose the model with the flow rate desired for your application. The units are available individually or in quantity sets.
Not Yet Reviewed
$59.95
$14.50
Clearance
Carter OE replacement electric fuel pumps are manufactured in a plant that is TS16949 certified and provides the absolute latest in OE-quality certifications. This dedication to excellence, combined with in-depth OE experience, results in products that provide dependable performance that meet or exceed expectations. Carter OE replacement electric fuel pumps feature: * Factory-specified pressure and flow * OE-matched electrical connections * Accurate diameter and length * Original inlet and outlet positions * 100 percent factory-tested reliability * Roller vanes, which are more contaminant-tolerant than other designs * Carbide and brass bearings instead of plastic for longer life and smoother operation
( 185 )
$69.99
—
$485.99
$25.50
—
$210.50
Clearance
"Keep it original" with Spectra Premium Classic injection fuel tanks. The tanks are 100 percent new, OE-style models that will meet or exceed the manufacturer's specification, while providing you with a drop-in-fit for easy installation. And your classic will receive the fit, form, and function it deserves. Features and benefits include: * Original details are respected to the letter * Manufactured using American-made specially coated Ni-Tern LT35 steel * Built with precise, original mounting strap depressions * Square and round welds to match original specs * No logo or product numbers used * A turnkey fuel tank comes with a sender assembly completely installed and is just "plug-and-play" * Uses the most advanced CAD technology to ensure total design integrity * Manufactured on an exclusive production line by specially trained personnel * Total quality control at all levels of production * Each tank is pressure tested under water * Visual inspection is made prior to packaging
( 5 )
$447.99
$323.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
