Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
397 Results Found For "rod"
Showing In Stock Items. Show All 512 Items.
Clevite H-Series Rod Bearings
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 168 )
$9.50
—
$9.99
BTR Connecting Rod Bolts
BTR connecting rod bolts are stock replacements for Gen III and Gen IV LS engines. An important connection in your rotating assembly, your rods need the correct fasteners to hold them together. You can be confident that the fit and strength of BTR connecting rod bolts will do the job.
( 4 )
$2.99
Sealed Power CP-Series Rod Bearings
Federal Mogul CP-Series rod bearings feature classic tri-metal construction and are a good choice for either street or moderate competition use. They have rugged 1010 steel backings, covered by Federal Mogul's H-24 copper-lead alloy. On top of this is a nickel barrier, followed by the tri-metal (lead-tin-copper) overplate that gives these bearings their strength and fatigue resistance. The bearings are then entirely covered with a flash coating of tin. Order the set designed for use with your make/model and engine application.
( 118 )
$5.99
—
$9.99
Chevrolet Performance Connecting Rod Bolts
What better way to secure your connecting rods than with genuine Chevrolet Performance bolts? Your rods are an important connection in your rotating assembly--making the fasteners that hold them together even more important. Choose the strength of Chevrolet Performance connecting rod bolts.
( 3 )
$3.99
—
$6.99
Summit Racing™ Rod Ends
Whether you're building a 4-link suspension with Summit Racing™ chromoly rod ends or custom carburetor linkage with our mild steel rod ends we're sure to have the right one for your project. Summit Racing™ rod ends are made from the highest quality materials.
( 71 )
$4.99
—
$8.99
Clevite P-Series Rod Bearings
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 289 )
$6.99
—
$9.99
Melling Pushrods
Melling OEM replacement pushrods are perfect for stock rebuild or mild performance applications where open spring pressures do not exceed 300 lbs. They're manufactured from steel tubing and work well with factory or aftermarket rocker arms. These units are available in a wide range of lengths and other options for fitment on countless makes and models. When you're replacing your valvetrain components, trust Melling pushrods to keep your engine running smoothly.
( 78 )
$1.99
—
$9.99
ACDelco GM Genuine Parts Pushrods
ACDelco GM Genuine Parts engine valve pushrods are available for a wide range of vehicles, including many Chevrolet, Cadillac, and GMC models. These steel replacements are designed, engineered, and tested to rigorous standards, all backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Order the model recommended for your application.
Not Yet Reviewed
$4.99
FK Rod End Linkage Ladders
FK rod end linkage ladders provide adjustability. Manufactured from low-carbon steel and zinc plated with yellow chromate, FK adjuster ladders have one end threaded 3/4 in.-16 left-hand male and the other with 3/4 in.-16 right-hand female. You can make your own turnbuckle linkage with 3/4 in. (Size 12) male and female rod ends.
Not Yet Reviewed
$9.99
Sealed Power A-Series Rod Bearings
Sealed Power A-Series rod bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank with a surface that hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better wall variance control. It also helps to minimize debris embedding, which can score the crank's surface. Order the replacement bearings designed for your vehicle make and engine application.
( 33 )
$5.99
—
$9.99
FK CM/CF Series Rod Ends
FK CM/CF Series rod ends are economical replacements featuring 2-piece, metal-to-metal construction. Their bodies are made using low-carbon steel that's zinc plated and chromate treated; and their balls are made of 52100 hard chrome plated steel. These high-quality rod ends are often used in street rod applications without high-impact or load requirements. Order the size and thread options needed for your application.
( 19 )
$2.99
—
$8.99
Energy Suspension Tie Rod End Dust Boots
Energy Suspension tie rod end dust boots resist damage from dirt, rocks, sand, water, road salt, and oils, while adding a colorful touch to your steering linkage. Each boot has an important 5-point sealing action that prevents contamination and loss of lubricant—the major cause of rod wear. Your factory originals are likely molded rubber, which will dry rot, crack, and split over time. Energy Suspension bushings are constructed from durable polyurethane in a variety of shapes and sizes to fit countless vehicles. Order them by the pair, the dozen, or in larger quantities!
( 130 )
$4.13
—
$6.16
FK ECM/ECF Series Rod Ends
FK ECM/ECF Series rod ends are frequently used in street rod applications without high-impact or load requirements. These economy rod ends feature 2-piece, metal-to-metal construction. Their bodies are constructed using low carbon steel and are zinc plated and chromate treated for performance and durability. Their ball is made of 52100 steel and is hard chrome plated for additional strength.
( 16 )
$3.99
—
$5.99
FK JM Series Rod Ends
FK JM Series rod ends feature a heat-treated, zinc plated, and chromate treated alloy steel body. Their ball is made of 52100 steel and is heat-treated and hard chrome plated for durability. JM Series rod ends have heat-treated steel alloy races, which are zinc plated and chromate treated to resist oxidation. These 3-piece, wear-resistant rod ends are precision-made and are offered in metal-to-metal or PTFE-lined styles. Order the size, thread, load capacity and other options available for your application.
( 7 )
$8.50
—
$8.99
Clearance
FK ALJF Series Rod Ends
If you're looking for precision-made, wear-resistant rod ends, look no further than FK ALJF Series rod ends. They feature 7075-T6 aluminum bodies with an attractive, hard anodized red finish. Their balls are made of 52100 steel that's heat-treated and hard chrome plated for strength and durability. Their races are heat-treated steel alloy and are zinc plated to resist oxidation. These 3-piece rod ends are available with PTFE liners.
( 5 )
$11.99
$7.50
Clearance
FK ALJM Series Rod Ends
Thanks to demand from the open wheel market, FK Rod Ends offers ALJM Series rod ends for use on bird cages with a 3/8 in. bore. Available in a choice of sizes, ALJM Series rod ends also fit Jacobs ladders without drilling or using bushings. These 3-piece, precision wear-resistant rod ends feature 7075-T6 aluminum bodies with a hard, red anodized finish. Heat-treated steel alloy races are zinc plated and chromate-treated for strength and durability. ALJM Series rod ends have a heat-treated, hard chrome plated 52100 steel ball. PTFE liners are available for these rod ends.
( 6 )
$19.99
$8.50
Clearance
FK RSM Series Rod Ends
FK RSM Series rod ends offer 3-piece, extra-strong construction with a heavy-duty shank. They feature a heat-treated alloy steel body that's zinc plated and chromate treated for strength and corrosion resistance. RSM Series rod end balls are made from heat-treated, hard chrome plated 52100 steel. Heat-treated steel alloy races are chromate treated and zinc plated. RSM Series rod ends are available in metal-to-metal or PTFE-lined styles. Order the size, thread, misalign angle, load capacity, and other options needed for your application.
( 3 )
$11.99
$6.50
QA1 Rod End Spacers
These QA1 rod end spacers are designed to fit between the rod end and the mounting point or bracket to prevent binding during suspension movement or travel. They are manufactured from high quality stainless steel and come in a variety of widths and rod end bore sizes. Eliminate the chance of suspension bind with a set of the QA1 rod end spacers.
( 10 )
$4.99
—
$7.99
QA1 Rod End Linkage Adjusters
QA1 rod end linkage adjusters are available in a variety of sizes and thread combinations to build your rod end linkage. They are built using quality materials and are manufactured to exacting tolerances.
( 7 )
$7.99
—
$9.99
Allstar Performance Standard Series Steel Rod Ends
These Allstar Performance standard series steel rod ends are designed to get your bars connected. They are manufactured from premium carbon steel and feature a 2-piece design for durability. The rod ends are available in different thread sizes and thread configurations to fit your suspension needs.
( 4 )
$4.99
—
$8.99
QA1 C Series Rod Ends
QA1 C Series rod ends are a perfect choice for an economical, yet durable rod end. Featuring a coated carbon steel body and a heat-treated ball, they will perform and last. The rod ends are available in hundreds of size options, including thread and head specs, as well as metal-to-metal and PTFE-lined styles.
( 113 )
$3.99
—
$9.99
Dorman Fuel Pump Pushrods
Dorman OEM replacement fuel pump pushrods are a great replacement for your worn or damaged rod. Do you need direct replacement? Get a Dorman fuel pump pushrod.
( 9 )
$8.99
Mopar Replacement Pushrods
Mopar Replacement pushrods are genuine OE-replacements. That means your Chrysler, Dodge, Jeep, or Ram will receive the perfect part to repair and/or restore your vehicle's performance and safety, just as it should be.
Not Yet Reviewed
$9.99
Clevite Rod Bolt Sleeves
Clevite recommends your using these bolt protectors any time you install a connecting rod. These neat little sleeves slip right over the rod bolts, preventing you from nicking the crankshaft while installing the piston and connecting rod assembly into the engine block.
( 42 )
$1.99
