Availability
Showing In Stock Items. Show All 729 Items.
Lucas semi-synthetic assembly lube is designed for mechanics and technicians to prelube bearings, cams, lifters, and valvetrain components. It contains zinc, moly, and other high-pressure additives, which offer maximum protection during engine break-in. Lucas semi-synthetic assembly lube is super-slick, easy to use, and will eliminate dry starts and prevent galling, seizing, and scuffing.
( 92 )
$5.99
—
$9.99
Permatex Ultra Slick engine assembly lube provides the proper lubrication of metal mating surfaces that's essential prior to starting a new or rebuilt engine project. It adheres to component surfaces to prevent scuffing and galling during initial start-up. This specialty automotive lubricant features a high-quality formulation that meets or exceeds OEM performance specifications for engine assembly lubricants. Use it on engine bearings, camshafts, lifters, valves and guides, and rocker shaft assemblies. Application directions: Apply a liberal coating to engine bearing, camshaft and lifter, and timing components as the engine is being assembled.
( 29 )
$7.99
Because of frictional inconsistencies with oil, moly, and other lubricants, it takes multiple cycles of torquing the bolt, loosening it, and tightening it again to obtain the required preload or stretch. Typically, when a fastener is first tightened, friction is at its highest point and the preload value or stretch is low. As the fastener is cycled numerous times the friction decreases and the preload increases. This phenomenon is called "preload scatter." With ARP Ultra Torque assembly lubricant, a fastener need only be torqued once to get within 5 percent of ideal preload, and it remains consistent through all subsequent cycles (from race-prep machining through final assembly). Moreover, given the inconsistencies of ordinary lubes, it's quite possible for adjacent head bolts or studs to have vastly different preloads. This scatter causes bore distortion, hampers piston ring seal, and leads to poor head gasket sealing. Order the tube or container size needed for your applications.
( 298 )
$1.99
—
$7.99
Summit Racing™ Engine Assembly Lubricant is a specially designed pre-lubricant for all gasoline and diesel engines. It's tacky lubricating film forms a protective coating during assembly and critical start up periods. Formulated from highly refined base oils and fortified with zinc dialkyldithiophosphate and other extreme pressure additives to enhance and sustain anti-scuffing, galling, and wear in. Apply liberally to all engine components including: Engine bearings, wrist pins, Timing components, valves and guides, Pushrod and rocker ends. • Adheres to metal surfaces will not drain off during or after assembly • Zinc and EP Agents provide superior wear-in protection during start-up of new engines • Treated with rust and corrosion inhibitors • Compatible with most engine oils • Exceeds OEM specifications as an Engine & Bearing Assembly Lubricant
( 5 )
$5.99
Clevite assembly lube is a "must" when you're rebuilding a motor. You should lube all of the bearings as a coating to prevent rust and engine failure for the initial start-up. A 1/3 oz. tube should be enough for an entire engine project.
( 56 )
$7.99
Summit Racing™ Camshaft and Lifter Assembly Lubricant is a heavy-duty, multi-purpose, extreme pressure lubricant, designed to reduce seizing, galling, and wear. It is formulated from a balanced blend of lubricating solids including molybdenum disulfide to assure superior performance during initial startup and camshaft break in. Use it liberally on flat tappet camshaft lobes and lifter faces upon assembly, or on any moving part subjected to extreme pressure and adverse conditions. Features and benefits: * Reduces surface damage and fretting wear upon startup * Designed for use on camshaft and lifters * Recommended for distributor gear, pushrod, rocker, and valve tips * Lowers friction and wear * Provides boundary lubrication protection * Provides excellent rust and corrosion protection * Completely dissolves in oil * Works as lubricant for press fitting operations
( 7 )
$4.99
Driven Racing Oil assembly grease is used by some of the top engine builders because it is a name they know and can trust. It provides proven extreme-pressure protection for heavily loaded parts during initial break-in. The unique formula completely dissolves in oil. Driven Racing Oil assembly grease can be used to prelube cams and lifters, and applying it to the piston ring land prevents micro welding during initial engine break-in. It can also be used on wrist pins, distributor gears, pushrods, and valve retainers.
( 54 )
$2.59
—
$6.49
Sealed Power engine assembly prelubes have been proven effective by more than 30 years of use on the assembly lines of U.S. car, truck, and off-road engine manufacturers. They are formulated especially for prelubrication of camshaft lobes and lifters (mechanical and hydraulic) prior to engine oil circulation. Also recommended for bearings, valve stems, rocker arms, push rod tips, and other metal-to-metal contact areas within the engine. Prelube increases load-carrying capacity of the engine oil during break-in to prevent scuffing and galling. The prelubes have special additives which withstand the extreme pressures exerted on cams and lifters. These easy flowing petroleum based lubes function as oil additives, which will not affect oil viscosity. They also hold fast to surfaces on which they are applied and won't run off like engine oil, even after prolonged storage time.
( 30 )
$8.99
Auto Metal Direct pedal assembly components keep your classic vehicle's foot controls in proper working order. AMD offers an assortment of factory-correct parts--from bushings and springs to pins and supports--to maintain smooth performance. Choose the fit and function of Auto Metal Direct pedal assembly components to replace your worn originals.
( 9 )
$3.99
—
$5.99
Maxima Oil Professional Assembly Lube is a specialty, film-forming lubricant designed to protect moving components and wear surfaces during assembly and initial break-in. It prevents metal-to-metal contact upon startup before adequate lubrication is supplied. The 2X Zinc formula activates at both high and low operating temperatures, providing unsurpassed protection. This lube easily mixes with petroleum and synthetic oils without plugging filters, while offering excellent rust and corrosion protection during long service periods and storage. Maxima Oil Professional Assembly Lube is fully formulated with high levels of anti-wear, extreme pressure additives, and surface active chemistry to reduce friction. Order individually or in larger quantities.
( 1 )
$9.99
Trans-Dapt Performance air filter assembly vents are specifically designed for venting air out of the side of your air cleaner. They are made of plastic and include all mounting hardware.
( 4 )
$6.99
PennGrade high performance engine assembly lubricant is a premium high-viscosity blend specifically designed to offer additional protection for green moving surfaces in engine assembly applications. It provides higher load-carrying ability and excellent surface film protection to prevent wear in highly stressed internal components. The lubricant is readily miscible with all types of mineral-based and synthetic engine oils. It does not contain solids such as molybdenum or graphite, which can cause clumping and/or oil filter plugging. PennGrade high performance engine assembly lubricant is recommended as a prelube for valvetrain components, including cam lobes, lifters, wrist pins, rod bearings, main bearings, and more!
( 4 )
$3.99
Painless Performance replacement diode assemblies are direct replacements for the diodes included in the Painless Performance rocker switch panels. They come with pre-terminated wire connectors and are shrink-wrapped for maximum protection.
( 18 )
$7.99
Body Parts marker light assemblies offer the right fit at the right price. These stock replacements are manufactured from quality materials to provide lasting service, keeping your vehicle properly illuminated. Get a direct fit with Body Parts marker light assemblies.
( 18 )
$2.50
—
$9.99
Melling Mell-Lube engine assembly and break-in fluid contains a special additive that plates wear surfaces to prevent scoring or galling during engine startup. Mell-Lube also contains corrosion inhibitors to prevent rust and pitting to new engines.
( 7 )
$4.99
Torco MPZ engine assembly lube is favored by professional mechanics for assembling many internal mechanical components, including wrist pins, pistons, bushings, plain bearings, ball bearings, roller bearings, journals, and transmission components. It is a high-viscosity, oil-soluble lubricant which contains a concentrate of anti-wear, anti-friction, and anti-shock chemistries featuring the highest degree of protection. Torco MPZ engine assembly lube offers excellent adhesion properties and will slowly run and drip, leaving a protective film on treated parts.
( 1 )
$3.99
—
$8.99
Clearance
Lucas engine assembly grease provides anti-wear, extreme pressure properties, and dissolves completely in oil. This heavy-duty, corrosion-resistant racing grease offers protection during initial start-up and is designed for use on cams and lifters. It is also recommended for use on distributor caps, rocker shafts, rocker tips, push rod tips, wrist pins, and valve guides. Key benefits of Lucas racing assembly grease: * Made of Calcium Sulfonate Complex thickener * Suitable for all metals * Tested and approved by top NASCAR teams * 1 lb. tub is ideal for ease of application * Also offered in 5/8 oz. packets * Unique blue color
Not Yet Reviewed
$2.99
$2.50
Light up your rear plate with these Dorman license plate light assemblies. They are designed to fit in your stock bumper with no modifications. The light assemblies feature a clear lens and can be hooked up to your parking light wiring so they are illuminated at nighttime.
( 33 )
$4.99
—
$9.99
Crown Automotive pedal assembly components facilitate the fuel delivery, stopping, and shifting capabilities of your vehicles. These quality Crown OE-style replacement parts are available for the vehicles listed in the applications.
( 1 )
$1.99
—
$7.99
Mopar replacement pedal assembly components are available for brake, gas, and clutch pedal in your vehicles. Each of the Mopar replacement components is manufactured from quality materials and provide proper fit, form, and function to work directly with your vehicle. Order the Mopar replacement pedal assembly component that is suited to fit your needs.
Not Yet Reviewed
$9.99
Howards Cams Extreme Pressure Assembly Lube is specifically formulated to properly break-in new flat tappet camshafts and prevent unwanted scuffing and wear. It's also useful in engine assembly.
( 3 )
$2.99
Torco MPZ engine assembly lube HP is favored by professional mechanics for assembling valvetrain components. It is a heavier version of MPZ engine assembly lube featuring higher load-carrying ability and extended lube film protection. The lube provides severe anti-wear, anti-friction, and anti-scuff protection on cam lobes, lifters, and other highly stressed valvetrain components. Torco MPZ engine assembly lube HP is completely oil-soluble.
( 2 )
$4.99
Vintage Air has you covered when it comes to fittings and accessories for your cooling system. This assembly lube is designed for use with O-ring fittings.
( 3 )
$1.99
LEED Brakes has the components you need to keep your hot rod's brake system functioning properly. LEED Brakes pedal assembly components can help you fix or customize your pedal to get it feeling just right.
( 1 )
$3.99
—
$8.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
