Availability
Showing In Stock Items. Show All 31 Items.
Allstar Performance seat belt anchors are designed to reinforce stock type floor pans when mounting seat belts. You won't have to worry about tear-through in case of an accident when you use these sturdy anchor plates to install aftermarket seat belts to your sheet metal floor.
( 3 )
$6.99
Summit Racing™ seat belt anchor bolts are designed to meet or exceed your automobile manufacturer's standards for quality. These bolts are engineered for maximum protection. Cut from steel with a yellow zinc or chrome finish, the anchors are available for front and/or rear inner and outer seat belt positions. They're offered for a wide range of vehicles—including many Chevrolet, GMC, Pontiac, Oldsmobile, and Cadillac cars, trucks, and vans from the 1960s and '70s. Replace those often missing or damaged seat belt bolts with our new reproductions.
( 2 )
$6.99
OER seat belt anchor bolts are designed to meet or exceed your automobile manufacturer's standards for quality. These bolts are engineered for maximum protection.
( 16 )
$8.99
Summit Racing™ seat belt anchor plates are stamped reinforcements that weld on the backside of the floor pan, giving you a safe solid anchor point for additional seat belts or when fabricating or repairing a floor pan. Made from 11-gauge steel, they weld on the opposite side of the panel and keep the mount from tearing through the sheet metal should you have an accident. Patterned after a factory plate, our Summit Racing™ seat belt anchor plates look great in restorations as well. Plates are offered individually or in a kit with two plates, bolts, and washers.
( 2 )
$8.99
OER seat belt retainers keep your shoulder harnesses in place. These quality reproductions are the correct rectangular shaped retainers that attach to the upper outer side of your bucket seats and allow the belt webbing to be secured.
Not Yet Reviewed
$10.99
Goodmark offers seat belt anchor bolts for a variety of classic cars from the 1960s and '70s. They're available polished or cadmium coated. Order the hardware recommended for your application—then buckle up and stay safe.
( 6 )
$6.99
—
$7.99
OER carries a full line of seat belt accessories for replacement and repair. These OER seat and shoulder belt guide escutcheons are designed to hold the shoulder belt retainer to the upper portion of the bucket seat back. Belt guide escutcheons are often overlooked during the replacement of seat upholstery and belts--make sure you've got the details covered with OER!
( 3 )
$11.99
OER 1977-81 shoulder harness retainers are high-quality reproduction seat belt guides designed for use on various GM models with bucket seats. These triangle shape guides attach to the upper outer side of the bucket seat to allow the seat belt webbing to be secured without twisting. OER seat belt guides are manufactured in injection molded ABS with the correct dimensions and grain to match the originals.
( 7 )
$10.99
Dorman shoulder harness retainers keep your seat belt's webbing properly aligned, so it won't twist when the belt is released or pulled. They offer high-quality construction for long-lasting durability and they are designed to match the appearance of your originals for seamless blending with your interior. Dorman shoulder harness retainers are direct replacements that will restore smooth seat belt operation.
Not Yet Reviewed
$3.99
RetroBelt mounting kits make installing your 2- and 3-point seat belts easy, with specific hardware components furnished for each harness style. The kits contain Grade 5 fasteners and all necessary washers and nuts.
( 6 )
$6.99
Zamp Sports offers a variety of racing harness components, including these seat belt bolt ends. They're made from steel with a protective black finish—and fit a variety of 5-point and 6-point SFI harnesses.
Not Yet Reviewed
$2.94
G-FORCE seat belt slide bar adjusters allow racers to make adjustments to their G-FORCE seat belt harnesses for a safe and comfortable fit when strapped into the driver's seat. They are made of steel with a zinc plated finish.
( 8 )
$9.00
Schroth Racing offers a variety of racing harness components, including replacement seat belt bolts. This steel hardware has a protective gold finish and is available in multiple lengths. The 7/16 in. size fits most factory seat belt locations, including European and Asian automobiles.
Not Yet Reviewed
$1.99
G-FORCE offers quality hardware for mounting your seat belts, and these eye bolts are no exception. They include the eyebolt, nut, and washer.
( 28 )
$9.00
Zamp Sports offers a variety of racing harness components, including these seat belt snap hooks. They're made from steel with a protective black finish—and fit a variety of 5-point and 6-point SFI harnesses.
( 2 )
$3.94
G-FORCE seat belt mounting backup plates are constructed of sturdy steel with a pre-drilled hole. They're required by the SCCA when mounting belts directly to the body of your race car.
( 3 )
$9.00
Zamp Sports offers a variety of racing harness components, including these seat belt slide bar adjusters. They're made from steel with a protective black finish—and fit a variety of 5-point and 6-point SFI harnesses.
( 1 )
$2.94
—
$3.94
PRP Seats racing harness sternum straps are removable safety accessories. These straps keep the shoulder pads together and stop them from slipping off your shoulders—in the case of an accident. If it's an extremely hard crash, the sternum strap is designed to break, rather than cause injury to the chest/neck. Invest in your safety; equip your racing harness with a 2 in. or 3 in. nylon sternum strap.
( 1 )
$9.99
Never take a chance when it comes to safety! RaceQuip offers four different hardware pieces to suit your specific application needs and to help ease belt installation. All harness hardware is constructed from premium-quality steel and plated to resist corrosion.
( 26 )
$9.38
—
$10.57
From bolt-in brackets and bar slides, to reinforcement plates, bolts, and tabs, Schroth Racing offers quality replacement harness components specifically designed for use with their competition restraints. Schroth is the industry's leading safety equipment supplier to professional, amateur, and beginning drivers. Begin every race with a secure harness system.
( 4 )
$1.99
—
$7.80
Schroth Racing sleeves provide the ideal situation for bolt-in harnesses. They allow the bracket to pivot on the bolt, allowing perfect geometry to be achieved. The pivot action allows the force that is applied on the webbing to dictate the orientation of the bolt, therefore, achieving the desired orientation of the bracket. These bolt pivot sleeves must be used in conjunction with a washer on one side. Schroth Racing offers these sleeves in different sizes for different size bolts, order the sleeve suited to fit your application needs.
( 2 )
$5.30
Summit Racing™ offers safety harness eye bolts to help ease the installation of your safety belt. These eyebolt, nut, and washer kits are made of premium quality steel, with a zinc plated finish and are available in different diameters and lengths to fit your application. When it comes to quality hardware for mounting your seat belts, Summit Racing™ has the racing harness components you need.
( 28 )
$4.99
Sparco makes a full line of harnesses that works in unity with their competition seats. When it comes time to install your harness, you need only the best hardware. Sparco makes all the harness components you need to easily and safely install your harness into your race car.
( 1 )
$6.00
RJS racing harness components are premium replacement hardware for your RJS harnesses. Made from high-quality steel or aluminum, they offer floor anchors, adjusters, slide bars, D-rings, and bolt/nut/washer kits to maintain the performance of your safety harnesses and keep you securely seated in your race car.
( 4 )
$2.13
—
$9.57
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
