Availability
Showing In Stock Items. Show All 59 Items.
Auto Metal Direct pedal assembly components keep your classic vehicle's foot controls in proper working order. AMD offers an assortment of factory-correct parts--from bushings and springs to pins and supports--to maintain smooth performance. Choose the fit and function of Auto Metal Direct pedal assembly components to replace your worn originals.
( 9 )
$3.99
—
$5.99
Crown Automotive pedal assembly components facilitate the fuel delivery, stopping, and shifting capabilities of your vehicles. These quality Crown OE-style replacement parts are available for the vehicles listed in the applications.
( 1 )
$1.99
—
$7.99
Mopar replacement pedal assembly components are available for brake, gas, and clutch pedal in your vehicles. Each of the Mopar replacement components is manufactured from quality materials and provide proper fit, form, and function to work directly with your vehicle. Order the Mopar replacement pedal assembly component that is suited to fit your needs.
Not Yet Reviewed
$9.99
Wilwood pedal assembly components are designed to replace various linkage accessories on your brake, clutch, and throttle systems. Among the parts available are bell crank levers, bearings, cables, swings, rod ends, and hardware. These components are made of high-quality materials to ensure a precise fit and long-lasting durability. When you put a foot to the pedals, your ride is in trusted hands with Wilwood equipment!
( 10 )
$5.21
LEED Brakes has the components you need to keep your hot rod's brake system functioning properly. LEED Brakes pedal assembly components can help you fix or customize your pedal to get it feeling just right.
( 1 )
$3.99
—
$8.99
Pedals are your physical connections to the classic car parked in your garage. Scott Drake pedal assembly components will help keep them working efficiently. From stops and springs to shafts, screws, and bushings, there are many small components that work together to keep you connected. Get them all from Scott Drake.
( 4 )
$5.69
OMIX-ADA has the various pedal assembly components needed to maintain the brakes, clutch, and accelerator on your ride. These parts are direct replacements for fitment on Jeep and Willys models dating as far back as the early 1940s. From arms, shafts, and bushings … to springs, brackets, and pads, OMIX-ADA has everything that you need to restore your pedal assembly to original performance.
( 7 )
$2.99
—
$3.99
Do you have a worn-out or damaged part in your pedal assembly? Don't sweat it--Wilwood has you covered. These parts are direct replacements for use with your Wilwood pedal assemblies.
( 2 )
$1.99
URO Parts manufactures their pedal assembly components to OEM dimensions and shapes for easy installation. The quality materials they use will resist both running heat and corrosion from harsh environmental elements. Most of these replacement parts come from the same facilities as many well-known and much costlier European brands. That translates into quality, reliability, and savings for URO customers ordering the pedal assembly components designed for their application!
Not Yet Reviewed
$4.99
—
$6.99
Have you been experiencing too much side to side movement and pedal binding at the pivot? OER brake and clutch pedal pivot bushings are designed to protect from abrasion. The split nylon flange bushings are manufactured to original specifications down to the smallest detail. OER brake and clutch pedal parts are application-specific and made to fit without modifications.
( 17 )
$7.99
RESTOPARTS® Manufactured accelerator cable grommets are made from molded plastic, and are necessary for secure throttle function. They snap into the accelerator pedal linkage and prevent the cable from pulling through. RESTOPARTS® Manufactured supplies high-quality replacement parts and accessories for your restoration projects.
( 14 )
$8.99
OER accelerator rod grommets and sleeves are manufactured to OE specifications to meet or exceed the quality of the originals. These reproduction grommets and sleeves are used in the throttle arm and carburetor linkage where the accelerator rod is mounted. Order the parts designed for fitment on your vehicle application.
( 17 )
$5.99
—
$6.99
OER offers original factory accelerator pedal ball studs designed for use on various GM models. Accelerator pedal ball studs can break after many years of use and will need to be replaced. It is always good practice to check your stud for wear when replacing the gas pedal linkage components. These ball studs are designed to mount to the floor pan. The accelerator pedal pivots on the ball stud. Sold individually. Two required per vehicle. Please note, this part may require washers for proper height, which are sold separately.
Not Yet Reviewed
$7.99
The Stop Shop pedal pivot shaft clips fit many classic models. These retaining clips hold the brake or clutch and brake pedal to the shaft. They also fit most 1963 to 1972 models, compatible with Chevelle, Camaro, Nova, Firebird, Corvette and more. These must-have parts fit all automatic/manual transmission models and are manufactured to the highest quality standards.
( 1 )
$7.99
ACDelco GM Genuine Parts brake pedal pivot bushings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These replacements are available for thousands of applications from 1982 and up. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles.
Not Yet Reviewed
$7.99
For decades, Fairchild Industries has provided top-quality products in extruded rubber, molded rubber, molded plastic, extruded plastic, and elastomer for customers worldwide. Their accelerator rod dust boots are designed by in-house automotive engineers, specializing in reverse-engineering products to ensure a specific, high-quality fit, while striving to improve upon the current original equipment manufacturer parts. Available for a selection of vehicles, they are perfect replacements for missing, torn, or damaged OE accelerator rod dust boots.
Not Yet Reviewed
$9.99
OER accelerator tension springs are designed to attach under your gas pedal pad and to the rod assembly to promote the correct tension ratio. These springs are made to exact specifications to ensure proper performance.
( 3 )
$5.99
OER accelerator pedal pins attach the accelerator pad to the pedal arm on your application. These accurate reproduction pins are vital components of your accelerator pedal assembly.
( 7 )
$7.99
Maintain a positive grip on your car's pedals with Tilton replacement pedal anti-slip tape. The tape fits aluminum pedal pads found in Tilton 600/800/900 Series assemblies. Replacement anti-slip tape is available for 1.60 in. and 2.60 in. wide pedal pads.
Not Yet Reviewed
$5.95
ACDelco GM Genuine Parts offers a variety of pedal assembly components and accessories, including brake pedal springs for applications such as Chevrolet, Buick, GMC, and Cadillac cars, trucks, and vans. These replacement springs are designed, engineered, and tested to rigorous standards—backed by General Motors. They are the same OE parts installed during the production of or validated for GM vehicles.
Not Yet Reviewed
$3.99
Worn-out bushings are a problem, no matter where they're located on your vehicle. With Scott Drake brake and clutch pedal replacement bushings, you can ensure smoother operation beneath your feet. These bushings are made from durable, long-wearing plastic, and you'll need six for manual transmission cars or four for automatic. Whatever your pony requires, Scott Drake is the #1 source for Mustang and Bronco quality reproduction parts.
( 10 )
$2.61
OER Authorized brake pedal clevises are universal-fit for many potential uses. They measure approximately 2 in. long, and are tapped for 3/8-24 fine thread. OER Authorized clevises are offered chrome plated to add some sparkle to your brake components or zinc plated for superior corrosion resistance. You can connect a brake master cylinder, or power brake booster pushrod to the brake pedal arm with OER Authorized brake pedal clevises.
( 3 )
$6.99
Allstar Performance brake pedal clevises fasten to the brake pedal arms to accept a threaded rod extension or power brake booster pushrod. These Allstar clevises are threaded for a 3/8 in.-24 rod and have a 3/8 in. pin.
( 1 )
$8.99
OER accelerator pedal bushings are necessary components for correctly installing your accelerator rod support. OER accelerator pedal bushings eliminate excess play in the gas pedal pad for smooth, even pedal operation. You can count on OER for everything that you need for proper accelerator function.
( 1 )
$5.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
