Availability
Showing In Stock Items. Show All 93 Items.
Summit Racing™ offers headlight dimmer switches for a wide range of Chevrolet cars and trucks from the 1930s and up. The floor-mounted switches are produced to factory standards and are application-specific. Order the replacement model recommended for your vehicle.
Not Yet Reviewed
$8.99
Auto Metal Direct pedal pads are direct replacements for the original factory pedal pads. These rubber pedal pads are available for a variety of pedal positions and applications, sold individually or as complete kits, some even include OE-style trim. Order the model designed for your application needs.
( 28 )
$6.99
—
$9.99
Goodmark window regulator rollers are designed to replace the factory worn-out, cracked, or missing rollers. They are made from quality materials and include the pivot to complete the installation.
( 5 )
$10.99
OER has the components that you need to keep your ride's sunvisors working correctly. OER Camaro and Firebird sunvisor nylon tip and bushing sets are excellent quality reproductions of the factory original components. These sets are ideal for replacing the worn tips.
( 13 )
$9.99
Are you doing a restoration on your classic and need to replace the inner door handle escutcheons? Use OER reproduction door handle escutcheons, which have been manufactured to original factory specifications using today's modern manufacturing techniques. They provide exceptional fit and function and install on your door panel behind the door release handle to provide a finished look.
( 10 )
$6.99
Replace your old or damaged dash air vent outlets with our Summit Racing™ high-quality reproductions. Available for a variety of applications, the dash air vent outlets are finely detailed, absolutely correct replacements for the factory units.
( 4 )
$7.99
These OER headlamp switch mounting nuts are used for retaining the headlamp switch to the instrument panel on various Chevrolet, Buick, Oldsmobile, and Pontiac models. They're manufactured from high-quality materials and are designed to fit in the factory location.
( 21 )
$9.99
Are your pedal pads worn or cracked? Not only do they look bad, but damaged pedal pads can also be a safety hazard while driving. Replace them with these reproduction pedal pads from OER! These top-quality pedal pads are identical replicas of the factory originals, down to the ribbing on the pads. Gas, brake, clutch, and E-brake pads are available for a variety of applications and correctly install in place of the stock pads. OER pedal pads will improve the appearance of your interior, and their rubber tread will help keep your feet in good contact with the pedals for safe braking and acceleration.
( 101 )
$5.99
—
$10.99
Auto Metal Direct window regulator rollers will help repair your existing regulators—easily and inexpensively. Unlike others, AMD's window regulator rollers are specifically manufactured with the accurate dimensions and material construction as the factory original for proper fitment and function.
( 2 )
$6.50
Have you ever leaned back in your bucket seat and heard or felt a little rattling? Chances are, the seat back stoppers are going bad or are missing altogether. OER offers an easy fix with their bucket seat back rubber stoppers. They're manufactured to original factory specifications using today's modern manufacturing techniques to produce the most authentic reproduction. They're the correct height, are steel-reinforced, and include the mounting screws to ensure a good, solid installation.
( 7 )
$8.99
Replace your old factory original door lock knobs with new ones from Scott Drake. These door locks are manufactured using quality materials to ensure a trouble-free installation experience. They come available in black, chrome, and/or satin chrome.
( 21 )
$7.79
RESTOPARTS® Manufactured headlight switch retaining nuts are designed to hold the headlamp switch in the dash and keep it there, right where it belongs! So, when you need hard-to-find replacement parts for the factory originals, look to RESTOPARTS® Manufactured.
( 7 )
$9.99
Dorman pedal pads are designed to replace your factory originals that have seen better days. Tough and practical, they stand up to all the elements--including harsh winter salt. Their true value, however, lies in safety: made of hardened rubber to stop shoes from slipping, they can be counted on to withstand continual wear and tear. Dorman pedal pads are available to fit the brake, clutch, accelerator, and parking brake positions. They install easily--just slip the pad onto the pedal. Where applicable, they are often sold in sets of two.
( 93 )
$4.99
—
$9.99
Goodmark horn contact kits include small components essential to a properly working horn. Available for a variety of classic car applications, these are direct OE replacement parts fit and perform just like the factory originals. The details are important if your restoration is to be authentic—and Goodmark has the reproduction parts to help you complete the job.
( 8 )
$4.99
Install your sunvisor properly with these OER sunvisor support screws. They are designed to fit the factory sunvisor or reproduction sunvisors and can be installed with normal hand tools.
( 5 )
$3.99
Crown Automotive interior switch bezels are replacement parts for your various dashboard controls, such as headlights, wipers, and heater. Factory bezels lose their luster over time, so when you're ready to spruce up your interior, just choose the premium-quality Crown accessories for direct fitment on your model.
( 2 )
$5.99
OER offers original factory accelerator pedal ball studs designed for use on various GM models. Accelerator pedal ball studs can break after many years of use and will need to be replaced. It is always good practice to check your stud for wear when replacing the gas pedal linkage components. These ball studs are designed to mount to the floor pan. The accelerator pedal pivots on the ball stud. Sold individually. Two required per vehicle. Please note, this part may require washers for proper height, which are sold separately.
Not Yet Reviewed
$7.99
OER rear view mirror mounting brackets are designed to mount your rear view mirror in the factory location. They're built to stock specifications, so you can rest assured they'll fit. The brackets are available in a variety of materials and finishes—for replacement on vehicles from the 1950s, '60s, '70s, and '80s.
( 6 )
$7.99
These OER inside locking rod clips are designed to keep the threaded inner lock rod in place inside the door. They are manufactured from durable nylon and install in the factory location in seconds.
( 2 )
$8.99
Are you in the market for replacement door pull strap end covers? RESTOPARTS® Manufactured reproduction end covers feature all of the same factory dimensions as the originals in fit and finish. These cover plates fit into the pull strap end for a clean, finished appearance. They require two per door.
( 3 )
$10.99
Does your glove box close as well as it used to? If not, then these OER glove box catch plates are likely the answer to your problem. Made from an exact factory stamping, these zinc plated catch plates will get your glove box to close like it did from the factory. These OER glove box catch plates also include mounting screws for a quick and easy installation.
( 1 )
$6.99
RESTOPARTS® Supplied window crank springs are for use with either interior door handles or window cranks. These original-style tension springs fit between the door and the handle to prevent annoying vibrations or damaging gouges to your door panels. The springs are tapered to match factory equipment and are black oxide coated for protection against rust. They will fit a wide range of vehicle applications.
( 2 )
$4.99
When it comes to a restoration project, the body and exterior are only half of the equation. To really complete the job, you will also need to finish the interior as well. Brothers Trucks window crank handles are simple pieces that will help you with getting the interior details right. They are excellent reproductions with black handles and silver inserts to give your classic the perfect factory look.
Not Yet Reviewed
$6.95
When it comes to your restoration project, the fasteners that you use play a large role in terms of the overall quality of the restoration. These OER glove box screws will ensure that the restoration of your classic vehicle's interior is spot-on factory correct. Available for several applications, these OER glove box screws are sure to please car appraisers and car show judges alike.
( 2 )
$5.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
