Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
36 Results Found For "Engine"
Showing In Stock Items. Show All 41 Items.
DEI Vapor Block Fuel Line Sleeves
DEI Vapor Block fuel line sleeves provide an easy, sensible, and low-cost solution to rough idling and difficult starting caused by vapor lock. Designed to greatly reduce heat in the line--keeping the fuel cooler and below boiling--the protective sleeves install hassle-free with a split design and adhesive flap; there's no need to disconnect the fuel line to install them! Simply wrap Vapor Block around the fuel line, remove the adhesive release liner, and press the adhesive-backed flap into place. Features and benefits include: * Made of glass fiber and polyester laminated to an aluminum outer layer * Offers excellent inexpensive, long-lasting thermal protection with no modifications needed * Available in different diameters
( 23 )
$9.99
DEI EGR Covers
DEI EGR covers protect your EGR system and nearby underhood components from damaging heat. The sewn-in hook-and-loop edges make for a quick and straightforward replacement without removing the EGR pipe. Just wrap the cover around the EGR pipe, close the edges, and then trim off any excess material--it's that easy! Features and benefits: * High-temperature glass fiber fabric bonded to aluminized outer facing * Handles direct heat up to 500 degrees F and radiant heat up to 2000 degrees F * Provides protection from oil, grease, and chemical spills * Available in three lengths
( 2 )
$5.99
DEI Fire Sleeves
Design Engineering Fire Sleeves offer ideal protection against intense underhood heat, making them perfect for protecting hoses, oil and fuel lines, and electrical wiring. The Fire Sleeves are constructed of a woven fiberglass braided sleeve heavily coated with 100 percent iron oxide silicone rubber. They are capable of withstanding temperatures of up to 500 degrees F continuous and up to 2,000 degrees F intermittent.
( 27 )
$4.99
—
$7.99
DEI Protect-A-Wires
Protect-A-Wires from DEI provide thermal protection for various under-hood components, such as spark plug wires, electrical wiring, and hoses, by shielding them from extreme engine and exhaust heat that can cause cracking, hardening, or burning. Basic sleeves are made from the same fiberglass composite as Protect-A-Boots to resist high temps. Upgrade kits include materials such as silicone and titanium for even greater heat insulation. To install, simply remove the distributor boot and connector, then easily slide on your Protect-A-Wire covering over the spark plug. This tubing can also be used to wrap speedometer cables, electrical wiring, and hoses. Multiple diameters, lengths, and colors are available. Product Overview: * Durable construction, made from high-temperature resistant materials * The titanium versions are resistant to chemicals and oils, offering comprehensive protection in various engine environments * Can be used to protect a wide range of components, including spark plug wires, fuel and oil lines, and speedometer cables, and are suitable for various vehicles from street cars to Powersports and marine applications * Shields sensitive components to prevent burning, cracking, and hardening of spark plug wires, electrical wiring, and hoses caused by severe under-hood temperatures, saving on replacement costs * The sleeves are designed to easily slide over existing wires and cables * Provides a professional-looking finish under-the-hood of your vehicle
( 3 )
$1.99
—
$2.99
DEI Titanium Protect-A- Sleeves
DEI has taken premier Titanium LR technology and transformed it into the best protection sleeves on the market. DEI Titanium Protect-A- Sleeves are capable of withstanding temperatures up to 1,800 degrees F direct heat and 2,500 degrees F radiant, shielding your wires, lines, and cables from damage. The sleeves are available in 4 ft. lengths. The 1/2 in. inside diameter will fit larger spark plug wires to protect them from hot exhaust manifolds and headers.
( 5 )
$8.99
Walker Exhaust Hangers
Walker provides the hardware and accessories to help finish the job faster and easier. Their exhaust hangers feature OE-style design for ease of installation and a properly completed exhaust repair. The hangers are engineered for durability and long service life. Do it right. Do it the Walker way with the Walker exhaust hangers designed for your application.
( 325 )
$1.99
—
$9.99
AP Exhaust Hangers
AP Exhaust hangers are precision engineered for easy installation. They're available in hundreds of configurations, as well as a variety of sizes and materials, to hold your exhaust system safely and securely.
( 103 )
$1.99
—
$9.99
Summit Racing™ Spark Plug Boot Protectors
It's true--cooler plug boots will actually help your engine perform better by reducing the risk of arc-over from burned boots. Our Summit Racing™ plug boot protectors are designed to keep those boots (and wires, too) cool and happy. They're guaranteed up to 1,200 degrees F!
( 268 )
$6.99
—
$9.99
Summit Racing™ 409 Stainless Exhaust Tubing Bends
Summit Racing™ 409 stainless exhaust tubing bends help you achieve your exhaust system goals with quality 409 stainless steel in a natural finish. This makes them more capable than steel exhaust piping for resisting wear and tear from corrosive road conditions. These bent pipes are available in different sizes and can be used for adapting your exhaust to changes like an engine swap or new headers, as well as replacements for damaged or missing sections. Whatever your build calls for, get it done properly with the Summit Racing™ 409 stainless steel bent exhaust pipes best suited for your application.
( 2 )
$8.99
Techflex Insultherm Tru-Fit Sleeving
Techflex Insultherm Tru-Fit sleeving is a braided fiberglass (FGL) sleeving that has been heat-treated and impregnated with an acrylic binder to reduce fraying and dusting, and improve usability and performance. FGL is engineered for applications where temperatures as high as 1,200 degrees F may be encountered. Tru-Fit is used as primary insulation on low-voltage applications such as leads in toasters, coffee makers, ranges, and other appliances. FGL may also be used as insulation and protection for small heaters and resistors that operate at high temperatures, and to insulate over soldered connections when exposure to solder melt temperatures is possible. Techflex Insultherm Tru-Fit sleeving provides a sturdy, long-lasting and inexpensive insulation solution. It is flexible and expandable, and can easily be installed over applications with irregular shapes and tight turns.
( 6 )
$8.99
URO Parts Exhaust Hangers
URO Parts exhaust hangers are designed and built to withstand the impact of today's worsening traffic conditions place on engines and exhaust systems. They are precisely engineered with quality materials and specific rubber hardness (where applicable) to endure heat, constant vibration, braking, and acceleration. Their continuous research and development enables URO Parts to be the first to supply many aftermarket exhaust components as alternatives to costly OE components.
Not Yet Reviewed
$1.99
Vibrant Performance Flexible Split Sleeves
A bunch of wires hanging individually along the frame or engine compartment can make a great project look tacky. Vibrant Performance flexible split sleeves can hold wires, cables, and hoses tightly without the need to buy a case of electrical tape. With regular wire looms, one normally uses zip ties to hold everything tight, and then electric tape to close off the slit in the looms. Good luck adding additional wires later on. Vibrant sleeves feature self-wrapping split braids that allow for the addition or removal of its contents without complete disassembly. They feature a 25 percent edge overlap and allow for tight radius bends without distortion or splitting open. Vibrant recommends cutting this sleeving with a hot knife to prevent fraying. When it comes to vehicles, our minds are constantly thinking about improvements. Vibrant Performance flexible split sleeves allow for easy upgrades.
( 2 )
$9.29
Trail-Gear Exhaust Manifold Stud and Nut kits
Trail-Gear exhaust manifold stud and nut kits are a must-have for installing new aftermarket headers. These TG kits maintain an even clamping force to keep the header tight against the head, sealing the exhaust gasket properly. If the studs on your truck are old, it's cheaper and easier to replace studs than it is to remove broken ones. Choose Trail-Gear replacement stud and nut kits to do the job properly. They're available for fitment on a variety of make/model and engine applications.
( 1 )
$9.99
AP Exhaust Flex Couplings
AP Exhaust flex couplings are stainless steel expansion joints designed for engine exhaust. They're constructed with 2-ply bellows and designed with a seamless, convoluted inner core—increasing flexibility in order to reduce vibrations and prevent exhaust leaks. The flex pipes are offered in a variety of lengths, diameters, and attachment styles.
( 66 )
$8.99
—
$9.99
Standard Motor Fuel Pre-Heater Hoses
Standard fuel pre-heater hoses are quality, direct fit OE replacements that match the OE units in all materials and dimensional criteria. These fuel pre-heater hoses are engineered to the very highest standards and have been tested under extreme conditions to provide increased flow over the original design! For direct OE replacements with perfect fit, finish, and function for flawless operation, choose Standard Motor.
( 3 )
$6.99
—
$7.99
Thermo-Tec Oil Filter Heat Shields
Thermo-Tec oil filter heat shields serve as a robust protective barrier for your oil filter, shielding it from the extreme heat from the engine. Available in two sizes, their design seamlessly encompasses the oil filter, offering a comprehensive defense against intense heat. Crafted with a reflective surface, they effectively deflect radiant heat, thus maintaining optimal operating temperatures within the oil filter housing. Thermo-Tec shields ensure the longevity and efficiency of your oil filter, safeguarding its performance even under demanding conditions. Select the proper size shield to fit your filter.
Not Yet Reviewed
$8.06
BTR Exhaust Manifold Bolts
The constant exposure to engine heat can cause exhaust manifold bolts to become brittle, making them prone to snapping. BTR offers steel exhaust manifold bolts to replace damaged or failing bolts. Select the quantity needed.
Not Yet Reviewed
$2.99
ACDelco GM Genuine Parts Secondary Air Injection Pump Check Valve Gaskets
ACDelco GM Genuine Parts secondary air injection pump check valve gaskets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These gaskets help form a gas-tight seal between the check valve and secondary air components, and are the true OE parts installed during the production of or validated by General Motors for GM vehicles. For optimal performance, choose genuine OE parts to service your GM vehicle.
Not Yet Reviewed
$2.99
URO Parts Muffler Mounts
URO Parts muffler mounts are designed and built to withstand the impact of today's worsening traffic conditions place on engines and their exhaust systems. Precisely engineered with quality materials and specific rubber hardness (where applicable), they endure heat, constant vibration, braking, and acceleration. URO Parts' continuous research and development enables them to be the first to supply many aftermarket exhaust components as alternatives to costly OE components.
Not Yet Reviewed
$2.99
Rein Automotive OE Quality Exhaust Manifold Studs
Rein Automotive's OE quality exhaust manifold studs are manufactured to strict engineering standards and specifications in materials and tolerances to ensure proper tightening and retention of the exhaust flanges. The studs are designed to be direct replacement for the original, identical to OEM for your specific model, ensuring proper fit and function. Rein Automotive OE quality stud fasteners are available in individual piece counts for your repair and replacement requirements. Order the OE quality studs for your application.
Not Yet Reviewed
$1.99
—
$8.99
AP Exhaust Pipe Rain Caps
Whether you're driving a tractor, a truck with stacks, or some type of heavy equipment, a downpour of water into the engine exhaust manifold is not good. AP Exhaust pipe rain caps keep your stacks covered, except when fumes are escaping. These steel caps are available with either a chrome or silver powdercoated finish. Install yours today!
( 5 )
$9.99
Sierra Marine Exhaust Elbow Gaskets
Sierra Marine offers exhaust elbow gaskets for a wide range of watercraft makes—including Barr, GLM, Mercruiser, Osco, Mallory, Mercury, and Pro Marine. The full-flow composite gaskets are used between the manifold and optional extension blocks. They fit countless engine applications; order the replacement gasket recommended for your vessel.
( 1 )
$8.99
URO Parts Hot Air Hoses
Part of their extensive line of emissions components, URO Parts hot air hoses are designed to comply with all applicable air pollution regulations. To withstand the stress that today's deteriorating traffic conditions place on an engine, URO hot air hoses are precisely engineered and manufactured from high-quality materials to survive high underhood temperatures and constant vibration. Continuous research and development enables URO Parts to be the first to supply many OE-replacement emissions parts—at significant cost savings. These flex tube hoses are available in a variety of diameters for applications from the 1950s through the 1980s. Order the model recommended for your vehicle.
Not Yet Reviewed
$3.99
CA Ignition/Heat Shield Bracket Bolts
When restoring or repairing your Corvette, even the small items are important. CA ignition/heat shield bracket bolts will provide the correct fit and they are engineered to meet or exceed OEM specifications. Instead of searching for the proper size bolts, order CA bracket bolts and be assured they will be right.
Not Yet Reviewed
$8.99
