Availability
Showing In Stock Items. Show All 68 Items.
Clearance
An engine running on dirty oil won't last. Keep it clean with an ACDelco Gold oil filter. They help trap particles up to 25 microns, or one-third the width of a human hair, thereby improving the quality, performance, and lifespan of your engine. ACDelco makes oil filters to fit 99 percent of all cars, light trucks, and sport utility vehicles on the road today. Order the model designed for your engine application. Additional features include: * Excellent filter capacity, enhanced efficiency, consistent flow management, and high durability * Tight seals to prevent unfiltered oil from entering your engine * Consistent, dependable oil filtration throughout the filters
( 174 )
$5.99
—
$6.99
Edelrock cam bearings are the replacements for your LS aluminum race block. They feature steel-backed Babbitt bearing material. When parts wear out, Edelbrock has what you need to maintain optimum performance.
Not Yet Reviewed
$12.95
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 164 )
$9.99
Federal Mogul CP-Series rod bearings feature classic tri-metal construction and are a good choice for either street or moderate competition use. They have rugged 1010 steel backings, covered by Federal Mogul's H-24 copper-lead alloy. On top of this is a nickel barrier, followed by the tri-metal (lead-tin-copper) overplate that gives these bearings their strength and fatigue resistance. The bearings are then entirely covered with a flash coating of tin. Order the set designed for use with your make/model and engine application.
( 115 )
$5.99
—
$21.99
Because all roller cam lobes are ground flat instead of tapered, like hydraulic or solid cams, COMP Cams provides a means of holding the cam back to the rear of the engine. Their cam buttons ride between the front of the timing gear and the back of the front cover and can be shimmed for proper endplay of the cam. COMP Cams makes solid nylon buttons and roller bearing thrust buttons for the ultimate in performance.
( 108 )
$15.95
ACDelco GM Genuine Parts harmonic balancer bolts are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These bolts fasten vehicle components together. GM Genuine Parts are the true OE parts installed during the production or validated by General Motors for GM vehicles.
( 1 )
$6.99
Motorcraft oil filters are specifically designed for Ford, Lincoln, and Mercury vehicles. Each filter, including the popular Motorcraft FL-1A, uses as many as 12 high-quality components. Choose the style designed for fitment on your vehicle. Construction features include: * Steel cases: "Ironed" for a precise fit, fluted to ease removal, and painted for rust resistance * Pressure relief valve: When it's cold outside, or if the filters become clogged, oil flow through the filters can be reduced. If this happens, the relief valve opens to provide a continuous oil supply. Its design also minimizes the chance of contaminated oil recirculating back * Anti-drainback valve: This feature keeps oil in the filters to prevent "dry starts" after your engine has been turned off. It's made with specially formulated materials that resist the aging effects that an engine's heat can cause * Efficient filter media: Re-engineered media increases Motorcraft filters' dirt-collecting capabilities, allowing them to capture more engine-harming particles than ever before
( 133 )
$8.99
—
$14.99
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 285 )
$6.99
—
$10.99
Standard Motor Products replacement PCV valves are emissions-control devices that route unburned crankcase blowby gases back into the intake manifold where they can be re-burned. By totally eliminating crankcase emissions, the constant recirculation of air through the crankcase helps to remove moisture, which would otherwise cause sludge to form. Standard Motor Products replacement PCV valves will extend the life of the oil and the engine.
( 52 )
$2.99
—
$9.99
Our Summit Racing™ cam buttons will keep your camshaft from walking back and forth in your block, which can lead to inaccurate timing and premature timing chain wear. The buttons are available in a variety of materials, sizes, and styles. They install with a standard cam bolt locking plate. Order the model recommended for your vehicle and engine application.
( 30 )
$4.99
—
$11.99
Sealed Power A-Series rod bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank with a surface that hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better wall variance control. It also helps to minimize debris embedding, which can score the crank's surface. Order the replacement bearings designed for your vehicle make and engine application.
( 33 )
$6.99
—
$9.99
ACDelco GM Genuine Parts engine valve pushrods are available for a wide range of vehicles, including many Chevrolet, Cadillac, and GMC models. These steel replacements are designed, engineered, and tested to rigorous standards, all backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Order the model recommended for your application.
Not Yet Reviewed
$4.99
WIX Filters XP oil filters are engineered for today's toughest driving conditions. WIX XP filters feature wire backed synthetic media that is designed to maximize the protection of full synthetic oil. XP filters are ideal for vehicles subject to towing trailers, high idling conditions, stop-and-go city driving, and harsh driving environments. Outfit your ride with WIX filters XP oil filters.
( 53 )
$7.99
—
$9.99
Melling oil galley barbell plugs are quality replacements for the galley barbell plugs on your LS engine. These oil diverter valves fit in the back of your LS engine block and are essential to the oil pressure circuit. You don't want to overlook the little things for an enduring repair or build, so don't forget to order a Melling oil galley barbell plug.
( 3 )
$9.99
ACDelco GM Genuine Parts engine valve springs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. These replacement springs are made from factory materials--and are available for over a thousand vehicle applications from Chevy, Buick, Hummer, Pontiac, Cadillac, GMC, Isuzu, and Saab.
( 1 )
$5.99
BTR oil galley barbell plugs are quality replacements for your LS engine. These oil diverter valves fit in the back of your LS engine block and are essential to the oil pressure circuit. You don't want to overlook the little things for an enduring repair or build, so don't forget to order a BTR oil galley barbell plug.
( 3 )
$6.99
ACDelco offers engine piston oil nozzles for a wide range of cars, trucks, and vans. These billet steel replacements are designed, engineered, and tested to rigorous standards—all backed by General Motors. GM Genuine Parts are true OE components installed during the production of (or validated for) GM vehicles. Order the piston oiler kit recommended for your application.
Not Yet Reviewed
$8.99
Summit Racing™ extended-life oil filters keep your engine free from contaminants. Our canister-style filters feature proprietary synthetic filter media that offers high filtration and low restriction—longer. These economical oil filters deliver up to 10,000 miles of engine protection. Order the model recommended for your vehicle and engine application. Summit Racing™ extended-life oil filters feature: * Durable 0.5mm thick steel canister for withstanding high operating pressures * High-capacity can design for trapping and holding dirt * 98 percent multi-pass particle removed efficiency * High-quality pressed steel baseplate * Silicone sealing gasket * Roll-tap formed threads to help prevent vibration fatigue * Silicone anti-drain-back valve that protects engine during start-up * Filter bypass relief valve if filter media becomes blocked * Textured powdercoating to ensure durability and deliver enhanced grip * Protective film over filter opening to prevent debris from contaminating filter prior to installation
( 39 )
$7.99
—
$8.99
Control what your PCV system allows back into your highly tuned combustion chamber with Keyser Manufacturing valve cover breathers. They prevent less-than combustible byproducts from being recycled into the combustion chamber, causing a buildup of crud on your valves and a less-than-optimal mixture in your combustion chamber. These breathers allow vapors to escape while catching any sludge, preventing it from leaking over your engine block.
( 6 )
$10.99
ACDelco GM Genuine Parts engine rocker arm bolts are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These hex-flanged steel bolts fasten vehicle components together. GM Genuine Parts are the true OE parts installed during the production or validated by General Motors for GM vehicles. Order the hardware recommended for your application.
Not Yet Reviewed
$6.99
ACDelco GM Genuine Parts engine valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These are the true OE parts installed during the production of or validated by General Motors for GM vehicles. For the optimal performance, replace your vehicle's parts with those made by the original manufacturer—ACDelco GM Genuine Parts.
( 1 )
$7.99
—
$9.99
ACDelco GM Genuine Parts PCV valve grommets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles.
( 4 )
$3.99
Fram Xtended guard oil filters maintain optimum oil flow for extended service. Unlike paper fiber filters, Fram synthetic triad fibers help trap dirt inside tiny microscopic channels to increase capacity and extend filter life. Fram Xtended Guard oil filters have a SureGrip feature that makes oil-changing easier, and their anti-drainback valve eliminates dry starts to prevent oil from draining back into the crankcase during engine shutdown. They also feature a long-life PTFE-coated exterior gasket.
( 19 )
$8.97
—
$9.42
ACDelco offers valve spring retainers for a variety of applications, including many Buick, Cadillac, Chevrolet, GMC, and Oldsmobile models. These OE replacements are designed, engineered, and tested to rigorous standards—and are backed by General Motors. They're the true factory parts installed during the production of each vehicle. The standard-style retainers are machined from steel with a protective finish. Order the size and thickness recommended for your engine.
Not Yet Reviewed
$4.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
