Availability
Showing In Stock Items. Show All 18 Items.
KYB strut mount plates are OE-quality replacement components designed to keep your strut in place. They help cushion impacts from road bumps to reduce the jarring effect, noise, and vibration that old mounts transmit into the vehicle. These plates mount to your existing OEM holes and allow the strut to pass through the center of the bearing for top mounting. They're made of high-strength steel with an internal bearing to offer long service life. Hundreds of models are available, for more than a dozen positions and applications from 1970 and up.
( 43 )
$5.27
—
$10.48
Scott Drake offers the correct shock mount bolts for your classic Mustang. These are the bolts that hold the top of the shock to the upper shock tower. Each bolt in these sets is 5/16 in. fine threads, zinc plated, and concours correct.
( 1 )
$9.78
Monroe Strut-Mate mounting kits are direct replacements designed to complement the ride control characteristics of Monroe struts. They use an internal bearing for long life. Monroe Strut-Mate mounting kits attach to your existing OEM holes and allow the strut to pass through the center of the bearing for top mounting. Not only are these kits a necessary component of the suspension system, but they can also prevent noise, steering binding, vibration and vehicle pull.
( 14 )
$6.99
Allstar Performance suspension limiters are available in single-bushing, double-bushing, and chain kit designs. Single-bushing limiters are used at the rear of the chassis to limit travel during acceleration "hike up" and control roll steer. Double-bushing limiters are used on the lift bar to control lift bar travel on deceleration. Both types absorb shock and help reduce tire unloading. Top plates are drilled to accept a 1/2 in. rod end for use with a shock mount, or to attach a weight jack bolt with 7/16 in.-20 internal threads. They include a clevis with a 3/8 in. hole for attachment of a chain or cable. Chain kit-style suspension limiters are also used to limit rear suspension or lift bar travel. The 3/16 x 18 in. long chain (can be cut to length) accepts a 3/8 in. bolt or pin, but may be modified to accept up to a 1/2 in. bolt. The included heat shrink sleeve installs over the chain to keep the chain in position and prevent binding.
( 1 )
$8.99
From top to bottom, Mevotech TTX stabilizer bar links have been engineered and designed to handle whatever tough work you can throw at them. Stabilizer links are small parts that provide a big service--body stability, a more comfortable ride, and better road handling. TTX parts are built to provide extended maintenance cycles and keep your vehicle on the road. Features include: * Sintered metal bearings for superior durability * Nut and easy snap cotter pin(where required) with Nylok thread adhesive pre-applied for optimal fastener retention * Grease fitting for ease of lubrication * Bushings with optimized compression technology * Repel-Tek finish for extreme corrosion protection
( 6 )
$8.99
Crown Automotive spindle nut sockets for your spindle drive wrench are constructed from steel with a black finish. Crown Automotive has more than just the quality parts you need to keep your Jeep tip-top. They also have the right tools to get the job done easily, while keeping your fingers and screwdrivers out of the grease. These sockets are well-built and tough.
( 6 )
$10.99
Air Lift bushings are top-quality bushings with a show-quality nickel plated finish. Air Lift bushings are sure to please.
Not Yet Reviewed
$5.99
Maximize your classic Corvette's suspension performance with CA's rear spring hanger bushing cushions. These rubber rear spring end cushions are designed to eliminate rear suspension noise, tire squat, or rear tire wear on your Corvette. This leaf spring installation hardware is engineered to meet or exceed OEM specifications; therefore, you will find the fit will work superbly for your restoration. For top-tier quality parts, CA remains the unrivaled choice to help you bring your classic car back to life with unmatched fidelity. Select the rear spring hanger bushing cushions for your application needs.
( 1 )
$3.99
Yukon Gear & Axle has even the small parts you're going to need. Their knuckle to spindle studs are just a sampling of the top-quality accessories they offer to complete your job successfully. Order the stud length and thread size recommended for your axle application.
( 4 )
$9.99
CA offers spring eyelet pin nuts and washers for 1953-1962 Corvette's. This installation hardware meets or exceeds OEM specifications. You will find the fit will work superbly for your restoration. CA remains the unrivaled choice for top-tier parts to bring classic vehicles back to life with unmatched fidelity.
Not Yet Reviewed
$7.99
Gabriel strut mounts can assist in providing a quiet ride with better handling. They're designed to meet or surpass factory specs without modification, and you'll be pleased with the money saved vs. OEM parts. Hundreds of mounts are available, in a variety of configurations for specific vehicles. Anytime you're upgrading your suspension system, Gabriel replacement strut mounts will help you complete the job. Never compromise ride and handling--choose top-quality Gabriel aftermarket parts. Hardware is included for installation, where applicable.
( 5 )
$6.99
—
$11.99
RideTech replacement ball half bushings help to restore your Shockwave shocks to like-new performance. These long-lasting Delrin® bushings eliminate noise and movement—and are available to fit the upper and lower stud mount positions. Refit your shocks with quality replacement bushings from RideTech.
Not Yet Reviewed
$3.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
