Free Shipping on Orders Over $109 at Summit Racing

Summit Racing™ Automatic Transmissions

Summit Racing™ Automatic Transmissions combine quality and economy to offer replacement transmissions in many styles and options. These units are remanufactured with all-new clutches, thrust washers, seals, bushings, and high-energy bands, along with other "failure prone" hard parts depending on unit. Other features include a rebuilt front pump, a valve body with shift for street and performance and high-quality seals and gaskets. You get all these impressive upgrades, along with reliable performance and extreme value. All transmissions are Dyno tested before they're shipped. Order the model recommended for your vehicle.

3.46 out of 5 stars ( 63 )

$5,455.99

—

$6,190.99

ATK High Performance Ford 302 375 HP Stage 3 Long Block Crate Engines with EFIes with EFI

ATK High Performance Ford 302 375 hp Stage 3 long block crate engines with EFI are designed to have great street manners and will work with most stock components. Teamed up with FiTech Self-Learning EFI systems, these ATK engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. Plus, they are dyno-tested with your EFI system and ready to go! Details and specs: * 375 hp/380 lbs.-ft. * Compression Ratio: 9.5:1 * FiTech Go Street EFI (wire harness and handheld unit included) * ATK Aluminum heads * Hydraulic roller cam * Cast steel crankshaft 50oz external balance * Hypereutectic pistons * Seasoned OE roller block 1987-1995 * 4.040 in. bore x 3.000 in. stroke * One-piece rear main seal * Front sump oil pan * Melling high volume oil pump * Double roller timing set * Right Hand inlet standard rotation water pump * 50oz external balancer * TCI 529610 157 tooth flexplate with 50oz balance * Edelbrock Performer RPM dual plane intake 7121 * Pro Billet distributor with melonite gear (MSD ignition box required for tach signal) * Autolite 3923 spark plugs 0.035 gap * 8mm Spark plug wires Cylinder Heads: * ATK aluminum cylinder heads * 58cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 185cc intake runners * 1.6 aluminum roller rockers Roller Cam specs: * .512 intake/.512 exhaust * 220 intake/224 exhaust duration @ .050 - 112-degree lobe separation Recommended: * 2,400-2,800 Stall converter * 34-36 degrees total timing * 13726548 firing order * 91 plus octane fuel

Not Yet Reviewed

$7,284.99

BendPak 10APX Pro Series 2-Post Lifts

BendPak 10APX Pro Series 2-post lifts are designed for mechanics who constantly deal with working in uncomfortable positions on the job. They offer a lifting height of 79.5 in. and an overhead beam of 157 in., providing ample room to work comfortably with top-tier equipment. Like the rest of the Pro Series, these powerful units feature a 10,000 lb. lifting capacity, Low-Pro arms, Bi-Metric arms, and more. Pro Series two-post lifts boast a revolutionary design that combines the finest qualities of today's lifts into a new car lift engineering concept. The result is a lift unlike any other, purposefully designed for extreme use, high loads, and unmatched operator safety and efficiency. * Experience the ultimate convenience with the Pro Series, offering both wide and narrow installation options in one customizable package. * Built to last, these versatile lifts ensure durability, safety, and reliability for all your automotive needs. * Improved under-car access thanks to the low-profile arms and extra-wide column spacing. Critical load-holding components are crafted from high tensile-strength steels, allowing greater telescoping movement in swing arms and tube profiles tailored for low ground clearance vehicles and outer-positioned EV lifting points. * Electric vehicles require specialized lifts to safely manage their increased weight from added batteries, reinforced frameworks, suspension systems, and protective metal armor. The Pro Series is designed to meet these demands with reinforced construction and purposefully engineered features, making it the perfect solution for EV service. * The Pro Series boasts a revolutionary Automatic Swing Arm Restraint System (ASARS), designed specifically for heavy vehicle service, setting a new standard in the industry. Engineered to withstand the rigorous pushing and pulling forces encountered during servicing, this system features a complete 360-degree load-holding grip. Its heavily forged-steel design delivers over 2,000 pounds of load-holding force, ensuring secure arm placement and preventing unintended movement during lift use and vehicle servicing. * The Pro Series also introduces revolutionary and patented swing arms tailored for accommodating a wide variety of vehicle lifting points. Unlike traditional lift arms, Pro Series arms retract shorter and extend farther, providing lift operators with extensive positioning options. * BendPak's exclusive Low-Pro swing arms incorporate telescoping channels with a lowered profile and dropped-end pad receivers. This design facilitates easier access to lift points on lowered chassis-height vehicles, reducing the risk of damage to vehicle side skirts, running boards, or ground effects. * The Bi-Metric adaptable swing arms are another exclusive feature, allowing users to load vehicles symmetrically or asymmetrically without needing to switch arms. * When it comes to lifting full-sized trucks or SUVs onto a two-post lift, you can't cut corners. Reduce your risks with BendPak's Frame Cradle Pads, ensuring your vehicle stays securely in place during every lift operation. The heavy-duty steel and thick polyurethane rubber pad lining provide durability and protection. * For even more functionality, you'll love the BendPak WSA-100 Work Station. This industrial-grade utility station integrates air and electric capabilities into your two-post or four-post lift seamlessly, boosting the efficiency of your shop—with four electrical outlets and two specialized air service outlets, one for lubricating air for tire inflation and another for clean air for pneumatic tools.

Not Yet Reviewed

$7,445.00

OTC 55-Ton Capacity Pneumatic/Hydraulic Heavy-Duty Shop Presses

The OTC 55-ton capacity pneumatic/hydraulic heavy-duty shop presses are designed for heavy-duty pressing applications, such as pressing axle bearings, piston pins, and other components. Key features include a side-to-side positioning ram for full capacity pressing along the entire bolster length, a 13 in. stroke hydraulic ram, and a choice of hydraulic power units. The pneumatic/hydraulic operation allows for precise control and ease of use, with a hand crank for adjusting the press bed height. Whether it's a specialty tool that you need or a unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians' productivity and shop profits. Key features and benefits: * Robust steel construction and powdercoat finish ensure long-lasting performance * Press can be used for various tasks, including pressing bearings, bending metal, straightening parts, and more * Side-to-side positioning of ram allows full capacity pressing along entire bolster length without buckling or bending * Includes single-acting ram with 13 in. stroke, air/hydraulic pump, gauge, and hose * The hydraulic system provides the necessary force for pressing, with a 13 in. stroke for flexibility * The pneumatic pump provides a convenient and efficient way to pressurize the hydraulic system, often with foot pedal control * The hand crank allows for easy and precise adjustment of the press bed height

Not Yet Reviewed

$8,522.99

BluePrint Engines GM 400 C.I.D. 508 HP Base Long Block Crate Engines with 6 in. Connecting Rods

Add some real power to your build—BluePrint Engines GM 400 c.i.d. 508 hp base long block crate engines with 6 in. connecting rods. These engine assemblies are built by skilled craftsmen utilizing BluePrint's exclusive designed and manufactured blocks. Their base units come complete with oil pans, valve covers, and front timing covers--letting you finish the engine out, your way, with fuel and ignition systems. They're also balanced, blueprinted, and dyno-tested. BluePrint Engines GM 400 c.i.d. 508 hp base crate engines include: * Cast iron block with 4-bolt mains * Compression ratio: 9.5:1 * Forged crankshaft * 6 in. forged H-beam connecting rods with 150,000 psi rod bolts * Forged pistons * Hydraulic roller cam * BluePrint aluminum heads with 64cc chamber * Dyno test results shipped with engine * 30-month/50,000-mile warranty

Not Yet Reviewed

$9,699.00

Ridetech 1967-70 Mustang Coilover Suspension Systems

Ridetech 1967-70 Mustang coilover suspension systems allows you to give your vintage Pony modern drivability. The benefits of buying these complete kits is that Ridetech has done all the homework for you. They have matched the perfect spring rate and components for your Mustang's best performance and ride quality. All you do is install. Completely upgrade your existing suspension with Ridetech coilover suspension systems. Features include: * Upper Strongarms feature corrected ball joint angles for the tall spindles. The upper ball joint has been moved back to allow for additional caster setting to improve high-speed stability and steering feel. Billet cross shafts are included that feature a lowered mounting point to increase camber gain and correct suspension geometry. They house a stout double sheer lower shock mount. * Lower Strongarms feature a unique design that combines the control and strut rod into a stronger, more appealing one-piece design. Additional caster is designed into the arms and includes a robust bearing in an aluminum housing at the front mount to replace the soft factory rubber units. * HQ Series coilovers utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling. The rebound knob is located at the top of the shock for underhood access. * Front MUSCLEBar helps reduce body roll and includes the PosiLink end links that provide immediate engagement between the chassis and control arms. * Bolt-on 4-link greatly improves traction, handling, and ride quality

Not Yet Reviewed

$6,230.00

FTI Performance TH400 Level 5 Transmissions

When the name of the game is horsepower, you need an FTI Performance TH400 Level 5 transmission to manage it. Rated up to 2,000 hp, these race-prepped, factory-cased, short-shaft units pack one heck of a punch. Each hand-built case includes a billet aluminum forward clutch hub and pro-mod direct drum, a 36-element sprag, and race material clutches. An FTI billet aluminum full manual reverse valve body provides firm shifts, while tough ER310 material input and intermediate shafts hold them all together. The standard deep aluminum pan holds more fluid for improved cooling. Be ready each race day, equipped with an incredibly strong FTI Performance TH400 Level 5 transmission.

Not Yet Reviewed

$5,349.00

TCI StreetFighter Automatic Transmission Packages

TCI StreetFighter automatic transmission packages are durable enough to withstand the rigors of even the toughest street machines. Using the highest quality TCI manufactured components, each StreetFighter package is equipped with an automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. This gives you racetrack shifts and shaves time off your ETs. Each transmission goes through a variety of tests to verify that internal fluid pressures and shift characteristic match TCI's strict quality control standards. For the system to operate properly, all throttle linkage, vacuum lines and kick-down components must be connected. Each transmission package consists of a triple-tested TCI transmission and precision-tuned torque converter, a universal transmission cooler and premium TCI RTF transmission fluid. These packages are available with a variety of transmission models and other performance options. Choose the package for your application needs.

3.5 out of 5 stars ( 18 )

$5,070.95

—

$5,237.95

FTI Performance Pro Powerglide Level 5.5 Transmissions

Delivering big power for racers, FTI Performance Pro Powerglide Level 5.5 transmissions are an unbreakable unit. Equipped with the FTI creatively designed spiral springs and valve body, these units don't creep when the brake is set—a must in today's racing world. With in-house machining, the transmissions are hand-assembled by one builder, and every clearance is set to exacting tolerances. FTI automatic transmissions house the greatest advances in Powerglide racing technology, and are designed to withstand the rigors of today's high performance engines in an extremely demanding environment. Other features include: * 2200 advertised horsepower rating * Protree transbrake 265 lbs. * Lightened steel clutch hub * 1.80 or 1.69 straight cut planetary * Vasco input shaft * 10-clutch drum * Pro mod wideband * High-flow pump * 300M output shaft

Not Yet Reviewed

$5,349.00

FTI Performance Mud Series Powerglide Level 5.5 Transmissions

Extreme mud racers need incredible parts—like an FTI Performance Mud Series Powerglide Level 5.5 transmission. These wicked units are capable of handling up to 2,200 hp, making them ideal for blowers or multi-stage nitrous. They start life with SFI-certified aftermarket cases, and then add all-new internal parts, including a billet aluminum valve body, a 10-clutch drum, and a 1.80 or 1.69 straight-cut gear planetary. VASCO ring-less input and 300M output shafts scream strength, while a deep aluminum pan helps keep parts cool. Hand-built to extreme tolerances, FTI Mud Series Powerglide Level 5.5 transmissions are available in one- or two-gear models, standard or shorty length. Order the model recommended for your vehicle make and engine application.

Not Yet Reviewed

$5,349.00

MaxJax M7K Supreme Lift Packages

MaxJax M7K Supreme vehicle lifts enable you to raise up to 7,000 lbs. while retaining a minimal footprint. The unique portable 2-post design offers great versatility and serviceability when compared to traditional mid-rise or low-rise garage lifting systems. Each Supreme package includes a 2-post car lift, tall adapter pins, frame cradle pads, upright oil drain, and rolling work seat. Built with safety features from the ground up: * Low-pressure HVLP Direct-Drive cylinders eliminate the need for lifting chains or screw mechanisms most commonly found on other lift designs * Hydraulic cylinders feature integrated velocity-fuse safety valves * A robust, gear-type flow divider precisely distributes hydraulic pressure, providing consistent, equalized lifting * Rugged safety lock bars are capable of holding three-times the rated lifting capacity * Arm restraints automatically engage each time the lift is raised * Detailed installation, maintenance and safety instructions accompany each MaxJax car lift Additional features: * Perfect for Advanced Driver Assistance Systems (ADAS) * Pop-Up Bay Ready * Clear undercar access * Portability * Stow to go in less than 15-minutes * Mobile power unit cart * Adjustable lifting arms and stackable adapters * Low-profile arms * Automatic arm restraints * Maintenance-free slide blocks * Single-piece columns * Direct-Drive technology * Industrial-grade hydraulic cylinders * Two lifts in one (optional motorcycle adapter kit allows you to safely lift motorcycles, ATV's or other motorized vehicles to a comfortable working height)

Not Yet Reviewed

$5,140.99

EMAX Industrial Plus Silent Air Piston Compressors

EMAX Industrial Plus Silent Air piston compressors are quiet. The most common complaints about compressors are their high noise levels. EMAX Silent Air units not only still the noise, but they also do it with a big cfm output and lower rpm. Featuring their Whisper 100 system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling intake air through a series of baffle plates and prefilter media inside the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer structure; plus, it also provides secondary filtration for cleaner air. Industrial Plus Silent Air piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with a built-in fan. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. All EMAX Industrial Plus compressors have low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Their 15 Service Factor means the motors can be pulled 15 percent over full load. Depending on the application, many Silent Air piston compressors feature totally enclosed, fan-cooled (TEFC) motors that keep harmful dust and particulates out of the motor. This allows them to be used in dusty commercial and industrial environments without worrying about maintenance. They have 100 percent copper windings with pre-wired magnetic starters (necessary on any motor over 15 amps). These are high-quality, name brand, premium efficiency motors that meet all UL and CSA requirements. Some lower horsepower models are equipped with name brand, open-drip (OPD) motors. The running and starting windings on these motors are all 100 percent copper-wound for premium efficiency, reliable performance, and durability. These units also meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Plus Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * Raised-pump mounting platforms that open the underside of the crankcase to cooling air flow * Automatic belt tensioners for much easier and quicker adjustments and alignment * Selectable continuous-run or automatic start/stop operation to maximize performance and reduce wear * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Dual-timer automatic tank drains eliminate maintenance * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings

4.75 out of 5 stars ( 16 )

$5,725.00

—

$8,147.20

FTI Performance Bracket Series Powerglide Level 5.5 Transmissions

Designed to work with up to 2,200 hp, FTI Performance Bracket Series Powerglide Level 5.5 transmissions are ideal for blowers or nitrous units commonly used in today's race cars. Their SFI-certified cases are filled with all-new internal parts, including a billet aluminum valve body, a 10-clutch drum, and a 1.80 or 1.69 planetary. These heavy-duty wonders include a VASCO ER100 material ring-less input shaft, a 300M output shaft, Red race clutches, and a deep aluminum pan. FTI Performance Bracket Series Powerglide Level 5.5 transmissions are professionally assembled and ready for race day. They're available in standard length and shorty versions; order the model recommended for your vehicle make and engine application.

Not Yet Reviewed

$5,349.00

Roush 2024 5.0L Mustang Phase 2 Supercharger Kits

You can transform your 2024 Ford Mustang into a true beast with Roush Phase 2 supercharger kits. Developed in partnership with Magnuson Superchargers and using Roush diagnostic tuning software for best-in-class calibration delivery and diagnostic capability, they unleash an extraordinary 810 hp and 630 lbs.-ft. of torque, propelling your driving experience to new heights. Each kit boasts a dual throttle body, front inlet, front drive, dual intercooled, inverted R2650 system with an 84mm pulley, peaking at 13 psi boost at 7,500 rpm. Revel in the unparalleled power, drivability, and performance that will make every drive an exhilarating experience. Features and benefits: * Dual front inlet, front drive, TVS R2650 supercharger with optimized, high flow inlet port for ultimate airflow capability * Unique Roush Red head unit * Reuses stock 80mm throttle bodies; retains symmetrical appearance and allows for reuse of stock induction components * Inverted design allows for large, high-efficiency, dual intercoolers for excellent heat transfer and lower intake air temperatures * High-flow, dual cone fuel injectors with optimized director plates for ideal injector targeting * Custom, billet fuel rails provide maximum flow with minimum restriction, while also ensuring correct injector orientation every time * Custom FEAD design and hardware allow for supercharger belt to run closer to the engine to reduce load on the crankshaft for ultimate reliability and durability * Large front heat exchanger provides the lowest possible intercooler temperatures while minimizing restriction to the stock cooling module; custom design for ease of installation--does not require removal of the vehicle fascia (less install time, less risk of damage) * Custom degas bottle provides huge volume and eliminates coolant aeration for ultimate cooling capacity * High-flow Bosch PCE intercooler pump * All hoses are custom formed for ultimate ease of installation and underhood appearance * Kit packages under the factory hood and K-brace with no modifications (K brace does not need to be removed for installation) * All wiring is plug-and-play * Colder heat range, reduced gap, high-quality Ford Performance spark plugs

Not Yet Reviewed

$9,995.00

ProCharger P-1X High Output Supercharger Systems

ProCharger P-1X high-output supercharger head units feature the robust, self-contained gearcase that is standard on most ProCharger models, but with a new aerodynamic compressor design. They create cooler-charge air temperatures and more horsepower at the same boost level and step-up ratio as their industry-standard supercharger kits (P-1SC-1 and D-1SC). This higher efficiency design is engineered to be a bolt-in replacement for both of those—they fit in the same brackets—and offers greater maximum-power potential. The compressor side of these superchargers (the volute and impeller) was redesigned with greater efficiency and less parasitic engine load in mind. This produces less heat and power needed to spin the impeller—and that adds up to more horsepower. Bolt-on some of the largest street-legal power gains available with a ProCharger P-1X high-output supercharger system. Additional features: * 10-15 flywheel horsepower gain on otherwise stock, modern V8 automotive engines at the same boost level and pulley size (versus P-1SC-1 models) * Larger gains possible at the same boost level with built and modified motors * 875-plus horsepower-capable * Designed for today's high-flowing modern V8 engines producing 300-plus naturally-aspirated horsepower * Available as optional upgrade with ProCharger systems and tuner kits * Highly-durable, high-horsepower designs with a compact, state-of-the-art 9.0 in. housing/volute * Available with standard or reduced-noise level * Slightly larger volutes than P-1SC-1/D-1SC models

Not Yet Reviewed

$8,909.00

Summit Bucks

Vortech Centrifugal Supercharger Kits

Whether you have a mundane daily driver or a high-horsepower racer, Vortech has a supercharger kit for you. Their centrifugal supercharger kits feature lightweight aluminum impellers that are heat-treated and high-speed balanced to ensure smooth operation. An O-ring compressor housing seal and an innovative impeller seal improve sealing and reduce friction. Vortech has taken away the headaches of building a custom kit by engineering these kits to have a true OEM-quality fit and finish. Each kit is 100 percent complete, right down to the wire ties. Most kits include a matched compressor supercharger unit with SQ technology for "Super Quiet" operation. A high-flow air intake system with a reusable air filter, heat-resistant silicone hose couplings, and premium-grade flex hose is included as well. Additional features: * Flow-tested cast aluminum and/or urethane air discharge tubing * OEM-style, heat-treated cast 356 aluminum mounting brackets * Supercharger drive pulley * Integrated belt tensioner * Premium drive belt * Stainless steel clamps * Heavy-duty mounting hardware * Choice of satin or polished finish * Step-by-step, fully illustrated installation manual

4.22 out of 5 stars ( 9 )

$8,265.99

—

$10,702.99

Summit Bucks

Vortech Carbureted Centrifugal Supercharger Kits

Now you don't have to run a cumbersome roots-style supercharger on your vintage muscle. Vortech's carbureted centrifugal supercharger kits are designed to bring the performance and compact fit associated with late model fuel injected kits to vehicles equipped with carbureted engines. In most cases, these kits will fit under your stock hood without modifications. The heart of each kit is either a gear-driven V-1 S-Trim head unit or a gear-driven V-7 YSi-Trim head unit, unless otherwise noted. The cast aluminum carburetor enclosure assembly pressurizes the float bowls and throttle shafts for seamless response, and is designed for use with Holley 4150 or Demon 750 MD carburetors. The enclosure features front and rear -8 AN fuel inlet ports as well as provisions for pressure and vacuum connections. Linkage arms, a splined shaft, left/right hand spherical rod ends, and carburetor studs are included for simple throttle connection and adjustment. The included oil feed and oil drain assemblies deliver the best possible lubrication and cooling for the supercharger. They also feature a 6061-T6 billet aluminum supercharger crank pulley, pulley spacer, and an automatic belt tensioner.

3.0 out of 5 stars ( 1 )

$6,004.99

Roush 2024 5.0L Mustang Phase 1 Supercharger Kits

Ready to take your 2024 5.0L Mustang GT to the pinnacle of performance? Roush Phase 1 supercharger kits are engineered to transform your Mustang into a 740 hp powerhouse with unbeatable durability, cooling, and power delivery. The 740 hp, 600 lbs.-ft. of torque Roush S650 Mustang Phase 1 supercharger kit is engineered to provide exceptional performance through innovative design and cutting-edge components, tailored specifically for Mustang enthusiasts seeking peak horsepower and reliability. Roush achieved a 10.55 second 1/4-mile at 133 mph and 0-60 3-seconds with a 1.39G acceleration force on a stock car with this supercharger and slicks on a prepped track (10R80 automatic transmission, 3.55 rear gear ratio). Additional product features and benefits: * This supercharger features a dual front inlet and front-drive setup, maximizing airflow with an optimized, high-flow inlet port. It's designed for ultimate airflow capacity, ensuring your engine breathes freely to produce unparalleled horsepower. * The supercharger head unit boasts a unique Roush Red finish, adding an unmistakable, high-performance look to your engine bay. * The kit reuses the factory twin 80mm throttle bodies, retaining a symmetrical appearance and allowing you to reuse stock induction components for a clean and streamlined look. * Featuring an inverted design, the Roush Phase 1 kit houses dual high-efficiency intercoolers. This setup maximizes heat transfer while lowering intake air temperatures, keeping your engine cool under high demand. * High-Flow Dual Cone Fuel Injectors: Equipped with optimized director plates, the injectors target fuel precisely for efficient combustion and enhanced performance. * Billet aluminum fuel rails provide maximum flow with minimal restriction, ensuring correct injector alignment and a consistent fuel supply to meet the demands of high performance driving. * Designed with a custom FEAD, 90mm pulley, and strategic hardware placement, the supercharger belt runs closer to the engine, reducing crankshaft load and enhancing overall reliability. * The large front heat exchanger delivers exceptional intercooling with minimal restriction to the factory cooling module. Its custom design makes installation straightforward, with no need to remove the front fascia, saving install time and minimizing any risk of damage. * Each kit includes a high-capacity degas bottle that prevents coolant aeration, offering superior cooling capacity for consistent performance. * The intercooler pump is a high-flow Bosch PCE model, delivering reliable cooling to support long-lasting supercharger performance. * Every hose in this kit is custom-formed to ensure a clean installation and streamlined underhood appearance, making the system as easy to install as it is to admire. * The entire kit is engineered to fit beneath the stock Mustang hood and K-brace without any modification. The K-brace doesn't need to be removed, making installation simpler and preserving the structural integrity of your Mustang. * All wiring is plug-and-play, offering a smooth and straightforward installation process. * Colder heat range spark plugs with a reduced gap come pre-installed, ensuring optimal performance and durability under increased boost. * The kit is calibrated with Roush's Diagnostic Tuning Software, delivering best-in-class performance while maintaining seamless diagnostic capabilities. This software ensures the kit runs smoothly while adhering to Roush's high standards. * Developed in partnership with Magnuson, a company with over 50 years of supercharging experience, this kit brings together Roush's and Magnuson's expertise for a product that excels in performance, durability, and innovation.

Not Yet Reviewed

$9,995.00

OTC Mobile Vehicle Lift Systems

OTC's mobile vehicle lift systems have a unique design that provides lift from the tires, not the frame or axle members. They are ideal for situations where limited ground clearance or a lack of clear access complicates lifting. The mobile tandem system is air-operated to handle Class 7 and Class 8 tractor lifting needs. No need to waste time re-blocking and making additional lifts for the clearance you need for under-vehicle service. Roll the system to the vehicle anywhere in the shop or outside on a level surface. Single controller operates both sides of the system for a smooth, level lift up to two full feet from the bottom of the tires to the ground. Units can double as support stands when retention pin is inserted. Value is at the core of OTC's tool and equipment portfolio.

Not Yet Reviewed

$18,747.99

FuelTech FT700 Plus EFI System

FuelTech FT700 and FT700 Plus systems represent the next evolution in engine management systems. Each with an intuitive interface that is compatible with most operating systems, lightning-fast processing, expansive storage capacity, and an abundance of advanced features, these units put the power to maximize engine performance at your fingertips. Whether for seasoned professionals or demanding enthusiasts, FuelTech FT700 and FT700 Plus ECU systems represent the future of engine management and the pinnacle of automotive performance. FuelTech FT700 programmable VCUs feature a 12 in. display, and encrypted Wi-Fi and Bluetooth connectivity, providing secure access to your VCU with the ability to receive and transmit data, without cables. Adjust settings, modify tuning parameters, perform datalogger analysis including telemetry, and receive or transmit data in real time from laptops, desktops, tablets, or smartphones. Versatile connectivity options and the ability to connect up to three devices simultaneously streamline data analysis and tuning modifications. Connectivity: * Built-in GPS and accelerometer * Connect up to three devices simultaneously * Connect via Wi-Fi, Bluetooth, or USB * 36 configurable inputs * 50 configurable outputs * Multimedia ports * USB ports * Built-in wideband O2 sensor controllers * GPS port * Multiple communication ports Dashboard: * 20 configurable LEDs -- 8 LEDs, 4 on either side of the screen for alerts -- 12 LEDs above the screen that act as an engine speed progression bar * Anti-glare screen provides a high-quality viewing experience in any situation * Adjustable screen brightness levels for optimal visibility, tailored to individual preferences * LCD multi-touch screen display -- Increased touch sensitivity makes it easier than ever to scroll between display screens, adjust settings, modify map configurations, or perform datalogger analysis directly from the screen * Fully customizable digital gauge cluster -- VCUs offers a variety of digital gauges and dials to choose from, allowing users to select the function, style, size, and location of each gauge to create a dash built to their needs and preferences Datalogger: * 64 Gb storage * 1,024 channels * Provides real time access to data and updates tuning parameters in real time

Not Yet Reviewed

$6,599.00

OTC 25-Ton Capacity Heavy-Duty Oil Operated Oil Filter Crushers

OTC's 25-ton capacity heavy-duty oil operated oil filter crushers are built with a durable design to accommodate a wide range of filter sizes, from automotive to heavy-duty. These units offer several benefits including reduced waste volume, minimized environmental impact by removing a high percentage of residual oil, and efficient, automatic operation. Key features and advantages include: * Built with heavy-duty components, these crushers are designed to withstand the demands of a busy shop environment * Handles the big filters (up to 6 in, diameter and 12 1/2 in. long) found in trucks, construction equipment, farm implements, etc. (may also be used for automotive and light truck filters—this unit does it all!) * Crushes filters to quarter of original size, removing up to 95 percent of filter's oil capacity * Automatic cycle feature-simply load the filter, push a button, and walk away *Air/hydraulic pump works on standard shop air (requires 9 cfm at 100 psi) * Special valving returns ram automatically at the end of each cycle, no electrical connections needed * Built-in floor stand completely assembled)—whole unit requires just five sq. ft. of floor space * Reduced environmental risk—by minimizing oil spillage and leakage during handling and disposal helps prevent environmental contamination

Not Yet Reviewed

$6,242.99

Ridetech 1967-70 Cougar Coilover Suspension Systems

Ridetech 1967-70 Cougar coilover suspension systems include everything you need to give your vintage Cougar modern drivability. These packages contain front upper and lower control arms, tall spindles, steering arms, inner and outer tie rods, a front MUSCLEBar, a bolt-in 4-link system, and four HQ Series coilovers for every corner of your vehicle. The bolt-on 4-link vastly improves traction, handling, and ride quality. Installation doesn't require any major modifications to the floor pan and requires only minimal welding to the axle tube (works with mini tubs). The R-joint rod ends combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing. Ridetech 1967-70 Cougar coilover suspension systems are as comfortable on the street as they are on the racetrack! Features, items, and specs: * Upper Strongarms feature corrected ball joint angles for the tall spindles * Upper ball joint moved back to allow for additional caster setting (improves high-speed stability and steering feel) * Billet cross shafts feature a lowered mounting point to increase camber gain and correct suspension geometry (they house a stout double-sheer lower shock mount) * Lower Strongarms feature a unique design that combines the control and strut rod into a stronger, more appealing one-piece design * Additional caster designed into the arms * Robust bearing in an aluminum housing at the front mount to replace the soft factory rubber units * HQ Series coilovers allow fine-tuning and deliver excellent ride quality and handling with a 1,000,0001 mile warranty (rebound knob located on top of front coilovers for underhood access) * Front MUSCLEBar helps reduce body roll and includes PosiLink endlinks that provide immediate engagement between chassis and control arms

Not Yet Reviewed

$6,130.00

BendPak HD-9SWX Super Wide Car Stacker Parking Lifts

These industrial strength BendPak HD-9SWX 9,000 lb.-capacity lifts work equally well in the service shop or at your home. Their super-wide construction allows these lifts to raise and store two vehicles simultaneously on four runways, while their high-rise design ensures that you'll rarely find a vehicle that won't fit underneath. Additional features include the following: * Double-wide configuration for quad-vehicle storage * Four runways * Super-tall rise * Extra-long ramps * Runways accommodate wide or narrow vehicles * Runways include rail-kit for optional accessories * Electric/hydraulic power system * Single hydraulic cylinder mounted underneath runway * Fully enclosed lifting cables, safety locks, and sheaves * Internal anti-sway slider blocks in each column * Oversized self-lubricating cable rollers * Oversized sheave diameter reduces cable fatigue * Features heavy-duty 3/8 in. aircraft cable * Rugged 1 1/4 in. roller axles * Multi-position safety locks in each column * Adjustable lock ladders * Runways feature non-skid surface * Push-button pneumatic safety release * Independent backup slack-cable safety latches * Inside runways adjust for different tread widths * Customizable power unit location * Removable approach ramps for additional drive-under clearance

Not Yet Reviewed

$12,595.00

Heidts Superide II Independent Front Suspension Kits

Enjoy driving your fat-fendered cruiser with the smooth ride and handling of independent suspension. Heidts Superide II independent front suspension kits utilize a Mustang II spindle to allow for a front mount rack and pinion unit, making engine installation much easier. The upper control arms use threaded adjusters for the wheel alignment. Unlike eccentric adjusters, they will never slip or lose alignment when hitting bumps in the road. Dozens of packages are available for applications from 1935 and up. Components include: * Heidts 3-piece crossmember * Mustang II stock spindles * Tubular upper and lower control arms * Front disc brake kit with 11 in. diameter brake rotors and 4-piston brake calipers * Manual rack and pinion steering, front mounted * Billet single adjustable coilover shocks with silver powdercoated springs

4.0 out of 5 stars ( 1 )

$5,213.00

—

$5,854.00

102 Results Found For "united"