Availability
ATK specializes in muscle. With the highest quality internal parts and dyno-proven combinations of every engine built, ATK is able to add the most bang for your buck and back it up with an industry leading warranty. This ATK High Performance GM LM7 5.3L 500 hp long block crate engine is fitted with AFR heads and FiTech EFI. Engine specifications: * Horsepower: 500 * Torque: 440 * Block: OE LM7/5.3L iron * Bore/stroke: up to 3.903 in. x 3.622 in. * Displacement (cu.in): up to 347c.i.d. * Crankshaft: OE GM 24 tooth reluctor wheel * Rods: OE powder metal * Pistons: Hypereutectic 10.1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: Custom performance grind * Timing chain: OE single roller * Cylinder heads: -- AFR CNC ported aluminum -- 59cc/200cc -- 2.000 in. intake/1.570 in. exhaust * Rocker arms: OE 1.7 ratio * Oil pump: Melling M295 * EFI System: -- FiTech Ultra port injection LS1 750 hp with transmission control -- Wiring harness and ECM/TCM included * Fuel injectors: FiTech 55 lb. * Spark plugs: Autolite #104 * Spark plug wires: 8mm * Balancer: Stock internally balanced
Not Yet Reviewed
$8,899.99
ATK High Performance Chevy LQ4 6.0L 460 hp long block crate engines lay down impressive power that can be run with factory fuel injection or retrofitted with a carburetor. They're hand-built, balanced, and blueprinted using top-quality parts. Don't waste time trying to salvage a high-mileage short block when you can get a fresh mill that's ready for your choice of components to make it your own. ATK Chevy LQ4 6.0L 460 hp long block crate engines include: * Handpicked and seasoned 6-bolt main block * Aligned and honed main bores * OE steel crankshaft * 3.622 in. stroke * OE connecting rods * Hypereutectic dish top pistons * Aluminum cylinder heads * Hydraulic roller camshaft * Timing chain and gear set * 1.7:1 ratio rocker arms * 24-tooth reluctor
( 10 )
$7,898.99
ATK High Performance GM 383 Stroker 500 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. They are dyno-tested with your EFI system and ready to go! Typically ATK GM 383 Stroker 500 hp complete long blocks consist of: * Seasoned OE block with 4-bolt mains * 4340 forged crankshaft * 4340 forged H-beam connecting rods * Forged pistons * Chromoly piston rings * Hydraulic roller camshaft * ATK aluminum cylinder heads * Billet roller rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor HEI * Long water pump * Front damper * FiTech Go EFI 4-600 hp * Spark plugs and wires * Dyno test/tune
Not Yet Reviewed
$8,198.99
ATK High Performance Ford 347 Stroker 410 hp Stage 3 long block crate engines with EFI offers the advantages of better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap. Teamed up with FiTech Self-Learning EFI systems, these ATK engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. Plus they are dyno-tested with your EFI system and ready to go! These Stage 3 EFI engines are available with Fox Body pan. Typically ATK Ford 347 Stroker 410 hp complete EFI engines consist of: * Seasoned OE roller block * Nodular iron crankshaft * 4340 forged I-beam connecting rods * Forged pistons * Chromoly piston rings * Hydraulic roller camshaft * Aluminum cylinder heads * Billet aluminum full roller rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor * Water pump * Front damper * FiTech Go EFI 600 hp TBI * Spark plugs and wires * Dyno test/tune
Not Yet Reviewed
$8,233.99
ATK High Performance Ford 502 515 hp Stage 3 long block crate engines use a smaller camshaft which will have a slightly smoother idle and has vacuum for power brakes. ATK Stage 3 or complete dressed engines are engineered for those wanting to drop the engine into their project and fire it up. They have outfitted the engines as completely as possible to save you time and headaches. Typically ATK Ford 502 515 hp complete long block engines consist of: * Seasoned OE roller block * Nodular iron crankshaft * 4340 forged I-beam connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic flat tappet camshaft * Performance cylinder heads * Stainless steel rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor * Water pump * Front damper * Fitech EFI unit with ECM and Harness * Spark plugs and wires
Not Yet Reviewed
$11,002.99
The Chevrolet Performance 5.7L 350 HO 333 HP Turnkey long block crate engines are assembled with all-new parts and high-flow heads, giving you more power than just about any production-spec small block ever installed at the factory. Designed, engineered, and tested to stringent Chevrolet specifications, these cast-iron blocks with four-bolt main caps is the foundation for the 350 HO, which is topped with iron Vortec heads fitted with 1.94/1.50 in. valves. In addition, durable rotating assembly has aluminum pistons that deliver a 9.0:1 compression ratio. Chevrolet Performance pioneered their high-performance crate engine half a century ago—and they have never stopped working to offer enthusiasts new and more powerful solutions for their projects. You've got a dream in your garage. Chevrolet Performance wants to help you bring it to life. Tech Specs: * Engine Type: Chevy Small-Block V-8 * Displacement (cu. in.): 350 * Bore x Stroke (in.): 4.000 x 3.480 * Block: Cast-iron with four-bolt main caps * Crankshaft: Nodular iron * Connecting Rods: powdered-metal steel * Pistons: cast-aluminum * Camshaft Type: hydraulic flat tappet * Camshaft Lift (in.): .435 intake / .460 exhaust * Camshaft Duration (@.050 in.): 212° intake/222° exhaust * Cylinder Heads: Vortec iron; 64-cc chambers * Valve Size (in.): 1.940 intake/1.500 exhaust * Compression Ratio: 9.0:1 nominal * Rocker Arms: stamped steel * Rocker Arm Ratio: 1.5:1 * Water Pump: cast iron, long-style * Flexplate: 12.750 in. * Recommended Fuel: premium pump * Ignition Timing: 32° Total @ 4,000 rpm * Maximum Recommended RPM: 5100 * External balance
( 1 )
$8,634.77
ATK High Performance Ford 302 375 hp Stage 3 long block crate engines with EFI are designed to have great street manners and will work with most stock components. Teamed up with FiTech Self-Learning EFI systems, these ATK engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. Plus, they are dyno-tested with your EFI system and ready to go! Details and specs: * 375 hp/380 lbs.-ft. * Compression Ratio: 9.5:1 * FiTech Go Street EFI (wire harness and handheld unit included) * ATK Aluminum heads * Hydraulic roller cam * Cast steel crankshaft 50oz external balance * Hypereutectic pistons * Seasoned OE roller block 1987-1995 * 4.040 in. bore x 3.000 in. stroke * One-piece rear main seal * Front sump oil pan * Melling high volume oil pump * Double roller timing set * Right Hand inlet standard rotation water pump * 50oz external balancer * TCI 529610 157 tooth flexplate with 50oz balance * Edelbrock Performer RPM dual plane intake 7121 * Pro Billet distributor with melonite gear (MSD ignition box required for tach signal) * Autolite 3923 spark plugs 0.035 gap * 8mm Spark plug wires Cylinder Heads: * ATK aluminum cylinder heads * 58cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 185cc intake runners * 1.6 aluminum roller rockers Roller Cam specs: * .512 intake/.512 exhaust * 220 intake/224 exhaust duration @ .050 - 112-degree lobe separation Recommended: * 2,400-2,800 Stall converter * 34-36 degrees total timing * 13726548 firing order * 91 plus octane fuel
Not Yet Reviewed
$7,284.99
Meet the newest member of the iconic 350-based ZZ engine family—ZZ6! Chevrolet Performance has rated these base crates to really deliver the power, thanks in part to their unique, lightweight aluminum cylinder heads that enable optimal airflow at high rpm. The engines are based on the proven Fast Burn design with large intake runners and valves. Along with their beehive-style valve springs that offer high-rpm efficiency and durability, the ZZ6 blocks make the most of every cubic inch of air drawn through them. Supporting the massive flow of air is an aggressive hydraulic roller camshaft and a forged steel crankshaft. The ZZ6 350 c.i.d. base crate engine kit includes intake manifold, distributor, water pump, damper, flexplate, and the distinctive, race-inspired valve covers. The legendary ZZ6 tech specs are: * Cast iron block with 4-bolt mains * Bore x stroke: 4.000 x 3.48 * Valve lift (in.): .474 intake/.510 exhaust * Camshaft duration at .050 in.: 208 degree intake/221 degree exhaust * Valve size (in.): 2.000 intake/1.550 exhaust * Compression ratio is 9.72:1 nominal * Aluminum roller-style rocker arms * Rocker arm ratio is 1.5:1 * Recommended fuel: Premium pump * Distributor: HEI * Ignition timing: 36 degree total @ 4,000 rpm * Maximum recommended rpm: 5,800 * Balance: external
Not Yet Reviewed
$9,126.05
BendPak introduces a game-changing solution for auto repair shops seeking flexibility in installation—the 10AP-168 Series 2-post lifts! As the automotive landscape evolves with advanced technology, it's crucial for auto repair shops to keep pace by equipping themselves with the latest tools and technology. Enter BendPak's revolutionary AP series of two-post lifts, marking a new era in car lift engineering. These lifts are meticulously designed to integrate the best features from existing two-post lift types into an entirely novel concept, catering to extreme use, heavy loads, and operator safety and efficiency. The 10AP-168 delivers everything professionals love about the AP Series in a taller package. Unlike the standard 10AP, this lift offers an enhanced overall height of 168 in., giving taller techs the room, they need to work more effectively. Additional product features and specs: * Premium-grade materials, a cutting-edge design, as well as a 10,000 lb. lifting capacity * Boasting an expandable top beam and innovative BI-METRIC arms, this lift can accommodate virtually any vehicle lifting requirement, whether it's symmetric or asymmetric * Intelligent lift design strikes a balance between simplicity and sophistication, resulting in minimal service and maintenance costs, leading to reduced operating expenses and heightened productivity * Evolutionary Automatic Swing Arm Restraint System (ASARS) stands strong against the forces exerted when vehicles unexpectedly shift during loading or service * Innovative and patented triple-telescoping swing arms redefine lifting precision—unique three-stage design, complete with a patented nesting feature, enables greater retraction and extension (inner sliding arm movement reaches new levels without any hindrance, allowing for precise lifting action with increased efficiency) * Exclusive Low-Pro swing arms are engineered for ultimate versatility—with telescoping channels and a dropped-end pad receiver, these arms excel in servicing lowered chassis-height vehicles to provide easy access to challenging lift points while minimizing the risk of damage to vehicle side skirts, running boards, and ground effects * Height stackable adapters and two-stage spin-up screw pads offers superior vertical pad placement for secure vehicle support—customizable precision with screw pads and adapters achieve impeccable lifting alignment with double-telescoping screw adapters featuring polyurethane pads resistant to gouges and tears * Adaptability of pads ensures level lifting across all conditions—optional 2.5 in. and 5 in. stackable adapters enhance vertical pad placement for precise and secure vehicle support—with a seamless drop-in design, quick and efficient usage is guaranteed, complemented by organized and secure storage on column-mounted racks * BendPak's patented automatic safety lock system is designed for seamless engagement during lift rising and effortless release during descent—this system streamlines operator actions, enhancing overall safety and workflow
Not Yet Reviewed
$6,595.00
The BendPak 10APX-181 Series 2-post lifts offer exceptional direct-drive lifting performance with the convenience of wide or narrow installation, wrapped up into one configurable package. These 2-post lifts are engineered to cater to mechanics who spend their days in challenging positions. Say goodbye to discomfort and hello to a premium workspace that accommodates technicians with the best equipment for the job—especially for those tackling larger vehicles. True to the 10AP Series, these lifts feature a robust 10,000-lb. lifting capacity, an expandable top beam, and BI-METRIC arms to suit virtually every vehicle lifting requirement—symmetric or asymmetric. The simple, yet highly sophisticated design of the 10APX-181 Series lifts keep service and maintenance costs to a minimum, delivering lower operating expenses and higher productivity. Equip your shop with the latest in lifting technology from BendPak—and experience the difference firsthand. Key features and specs: * High tensile-strength steels, low-profile arms, and meticulously designed swing arms reflect BendPak' commitment to safety-critical enhancements, empowering technicians to tackle heavier EVs with confidence * Lifts are not only sturdy and secure but also equipped with BendPak's advanced BI-METRIC arms, capable of seamlessly performing symmetric and asymmetric lifting * Uniquely designed BI-METRIC adaptable swing arms offer exceptional flexibility to empower users to configure their lifts symmetrically or asymmetrically, without the need for arm switching—2-in-1 design accelerates vehicle servicing, enabling techs to work more efficiently * Revolutionary Automatic Swing Arm Restraint System (ASARS), engineered to endure the elevated forces exerted during vehicle service—this patented system, constructed with heavily forged steel, locks lift arms securely in place with an impressive load-holding force of over 2000 lbs. * BendPak's patented triple-telescoping swing arms redefine precision lifting offers greater retraction and extension capabilities—patented nesting feature enables seamless inner sliding arm movement, eliminating hindrances and ensuring maximum efficiency in vehicle lifting * Exclusive Low-Pro swing arms redefine versatility, featuring telescoping channels with a shorter profile and dropped-end pad receivers (arms are engineered for optimal under-car access on lowered chassis-height vehicles to minimize the risk of damage to vehicle skirts, running boards, and ground effects) * Stackable adapters and spin-up screw pads provide secure vertical pad placement * Experience flawless lifting alignment with optional double-telescoping screw adapters, fortified with resilient polyurethane pads—these adapters ensure level lifting in all conditions, enhancing technician safety * Optional 2.5 in. and 5 in. stackable adapters further optimize vertical pad placement for secure vehicle support * Patented automatic safety lock system redefines safety and efficiency—designed for automatic engagement during lift rising operations, this system also boasts an ergonomic single-point release for effortless lock disengagement during lift descent
Not Yet Reviewed
$7,495.00
Tuxedo TP12KFX 2-Post floor plate lifts offer professional features and quality, along with a reliable time tested design, at an affordable price. This lift model is great for maintenance shops that work on tall box vans or utility trucks with roof racks because there is no overhead beam. The TP12KFX has the popular chain over hydraulic drive feature that the premium brand lifts offer, as well as extra tall carriages for sake of longevity and durability. The lower column height will allow service techs to fit the floor plate lift under lower ceilings. No shut-off bar up top will allow technicians to raise taller service trucks and vans without tripping the shut-off bar before the vehicle reaches full lifting height. The frame pads are the durable steel pads with the reliable rubber pads to minimize damage to the underside of the automobile and to assure a safe, sturdy resting place for the frame. Huge base plates at the bottom of each column provides safety and stability. Rugged anchoring system included. Key features: * Up to 12,000 lbs. capacity * Chain drive cylinders * Symmetric arms * Rubber door guards * Big foot base plates for extra stability * Dual point lock release * Auto arm restraint system * Spin up lift pads * Stackable height adapters included * Internal hose routing with integrated hose guards
Not Yet Reviewed
$8,611.99
ATK High Performance Chrysler 360 Magnum 320 hp Stage 3 long block crate engines with EFI are perfect for a street cruiser, and offer great street ability, stock idle, and good power. Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. Plus they are dyno-tested with your EFI system and ready to go! These Stage 3 engines with EFI set your vehicle up for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Typically ATK Chrysler 360 Magnum 320 hp complete EFI engines consist of: * Seasoned OE Magnum block * OE cast crankshaft * OE steel connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic roller camshaft * Magnum cylinder heads * Steel rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor * Stock water pump * Front damper * FiTech Go Street EFI 400 hp * Spark plugs and wires * Dyno test/tune
( 2 )
$5,898.99
ATK High Performance GM 350 390 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. They are dyno-tested with your EFI system and ready to go! Typically ATK GM 350 390 hp complete long block engines consist of: * Seasoned OE block with 4-bolt mains * OE cast crankshaft * OE powder metal connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic roller camshaft * ATK High Performance aluminum cylinder heads with 2.020 in. /1.600 ex. valves * Billet roller rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor HEI * Long water pump * Front damper * FiTech Go Street Electronic fuel injection 400hp * Spark plugs and wires * Dyno test/tune
Not Yet Reviewed
$5,398.99
ATK High Performance GM 350 Vortec 350 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you'll need is to supply is the fuel system--inline, in-tank, or the FiTech Fuel Command Center. They're dyno-tested with your EFI system and ready to go! Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc. seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @ 50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * EFI System: Fitech Go Street EFI 400HP (throttle body, wire harness and hand held unit included) * Fuel Pump: Not Provided - must run electric pump or mechanical fuel pump with Fitech fuel command center * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine info: * Oil: Conventional/Non Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 headers
( 2 )
$5,198.99
ATK High Performance GM 383 Stroker 435 hp Stage 3 long block crate engines with EFI are designed for better driveability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. They are dyno-tested with your EFI system and ready to go! Typically ATK GM 383 Stroker 435 hp complete long blocks consist of: * Seasoned OE block with 4-bolt mains * OE cast crankshaft * 4340 forged I-beam connecting rods * Forged pistons * Chromoly piston rings * Hydraulic roller camshaft * Dart SHP aluminum cylinder heads * Billet roller rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor HEI * Long water pump * Front damper * FiTech Go EFI 4-600 hp * Spark plugs and wires * Dyno test/tune
( 1 )
$7,098.99
ATK High Performance GM 383 Stroker 415 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. They are dyno-tested with your EFI system and ready to go! Typically ATK GM 383 Stroker 415 hp complete long blocks consist of: * Seasoned OE block with 4-bolt mains * Scat nodular iron crankshaft * Scat I-beam connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic roller camshaft * ATK High Performance aluminum cylinder heads with 2.020 in. /1.600 ex. valves * Billet roller rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor HEI * Long water pump * Front damper * FiTech Go EFI 4-600 hp * Spark plugs and wires * Dyno test/tune
Not Yet Reviewed
$6,098.99
The BluePrint Builder Series LS427/800 hp Supercharged crate engine and 4L80E-HD trans combo is a complete, ready-to-install LS-based powertrain package. It features a powerful 427 cu. in. engine making 800 hp and 780 lbs.-ft. of torque—paired with a heavy-duty 4L80E automatic transmission, Holley EFI, and essential accessories, designed for muscle cars and hot rods needing serious modern performance in a plug-and-play format. This kit combines a forged rotating assembly, high-flow heads, and a Magnuson supercharger for extreme power, simplifying swaps with pre-matched components. Key features and components: * Engine: GM LS compatible 427 cu. in. (7.0L) small block with an LSX-style block * Power output: Appx. 800 hp and 780 lbs.-ft. torque * Supercharger: Magnuson 2650 supercharger for maximum boost * Internal components: Forged crankshaft, forged pistons, aluminum cylinder heads, hydraulic roller cam * Fueling: Holley Terminator X EFI system for precise control * Transmission: Heavy-duty 4L80E automatic * Accessories: Includes water pump, alternator, power steering, A/C, and belts (often with choice of black or polished pulleys) * Package deal: Combines engine, transmission, and accessories for easier installation * Each package is dyno-tested * Benefits of this combo: -- Convenience: Saves time and money by bundling major drivetrain components that are already matched and assembled -- High performance: Delivers massive power for street performance, track days, or custom builds -- Modern tech: EFI control, LS platform compatibility, and modern components -- Reliability: Built with strong internals and paired with a robust transmission and accessories -- It's a complete, powerful, and simplified modern LS powertrain solution for serious performance enthusiasts
Not Yet Reviewed
$35,699.00
ATK High Performance Ford 302 300 hp Stage 3 long block crate engines with EFI are designed to work with most stock components, and to have great street manners. Teamed up with FiTech Self-Learning EFI systems, these ATK engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. Plus they are dyno-tested with your EFI system and ready to go! These Stage 3 EFI engines are available for front sump pan or Fox Body pan. Typically ATK Ford 302 300 hp complete EFI engines consist of: * Seasoned OE roller block * OE Ford cast crankshaft * OE steel connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic roller camshaft * OE cylinder heads * Stamped steel rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor * Water pump * Front damper * FiTech Go Street EFI 400 hp * Spark plugs and wires * Dyno test/tune
Not Yet Reviewed
$5,959.99
Ford Performance Parts 347 C.I.D. 350 hp sealed long block crate engines are based on the Ford BOSS 302 block. They are built to professional racing standards for asphalt and Circle Track Series with performance parts, like forged cranks, rods, and pistons with floating pins. Additional tech specs: * 350 hp at 5,500 rpm; 400 lbs.-ft. of torque at 4,000 rpm (depending on headers and 500 cfm carburetor used) * 10.5:1 compression ratio (nominal) * Hydraulic roller camshaft, .533 in. lift intake and exhaust, duration at .050 in. is 206 degrees intake and exhaust * Double roller timing chain set * High-performance 7 qt. rear sump Circle Track oil pan * Head studs * Ford Performance Parts aluminum "X2" cylinder heads with 1.94 in. intake and 1.54 in. exhaust valves * Ovate beehive valve springs * Dual plane aluminum intake manifold * 1.60:1 ratio roller rocker arms * Water pump * Billet distributor * High-volume oil pump * Ford Performance Parts polished aluminum valve covers * High-performance SFI-approved vibration damper * Engine weight as equipped is 414 lbs. (includes 7 qts. of oil) * Engine is internally balanced, "0" balance flywheel required (not included) * 347 cubic inches, 4.030 in. bore and 3.400 in. stroke * Rear sump performance oil pan and pickup * Regular rotation timing cover and regular rotation water pump * Non-EFI valve covers * Fuel pump eccentric installed, allows use of mechanical fuel pump * Damper may require a spacer for pulley alignment * Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W order)
Not Yet Reviewed
$13,250.00
GearStar offers GM 6L80E Level 3 transmission models for rear-wheel-drive or four-wheel-drive applications. They feature different advertised horsepower ratings and flash stall ratings. Each master overhaul kit comes complete with new gaskets, seals, rings, and pistons. The transmissions are compatible with engines such as Chevy small block Gen III/IV (LS-based) models from 1997 and up. Transmission details: * New wide inlet filter * New bearing kit * New bushing kit * Expanded capacity 3-5 reverse clutch pack using latest generation friction and steels * Expanded capacity 1-2-3-4 clutch pack using latest generation friction and steels * Expanded capacity 4-5-6 clutch pack using latest generation friction and steels * Low / Reverse clutch pack using latest generation friction and steels * 2-6 clutch pack using latest generation friction and steels * Updated AC Delco pump cover (stator support) * New pump vanes with hardened rings * Hardened pump rotor * Upgraded line boost valve and slide spring * Performance tuned valve body with new AC Delco transmission control module and solenoid body * Hardened and reinforced clutch hubs * Billet single disc converter * All transmissions are custom built by one of five master techs from start to finish—and DYNO tested with converter the equivalent of 100 miles to ensure that transmission and converter package are in perfect operating condition before they leave the GearStar facility.
Not Yet Reviewed
$8,745.00
—
$9,245.00
GearStar offers GM 6L90E Level 4 transmission models for rear-wheel-drive or four-wheel-drive applications. They feature different advertised horsepower ratings and flash stall ratings. Each master overhaul kit comes complete with new gaskets, seals, rings, and pistons. The transmissions are compatible with engines such as Chevy small block Gen III/IV (LS-based) models from 1997 and up. Transmission details: * New wide inlet filter * New bearing kit * New bushing kit * Expanded capacity 3-5 reverse clutch pack using latest generation friction and steels * Expanded capacity 1-2-3-4 clutch pack using latest generation friction and steels * Expanded capacity 4-5-6 clutch pack using latest generation friction and steels * Low / Reverse clutch pack using latest generation friction and steels * 2-6 clutch pack using latest generation friction and steels * Updated AC Delco pump cover (stator support) * New AC Delco pump body (bellhousing) * New pump vanes with hardened rings * Billet pump rotor * Billet 4-5-6 clutch hub * Hardened rear planetary assembly * Upgraded line boost valve and slide spring * Performance tuned valve body with new AC Delco transmission control module and solenoid body * Hardened and reinforced clutch hubs * 258mm billet triple disc converter * All transmissions are custom-built by one of five master techs from start to finish—and DYNO tested with converter the equivalent of 100 miles to ensure that the transmission and converter package are in perfect operating condition before they leave the GearStar facility.
Not Yet Reviewed
$9,945.00
—
$10,445.00
GearStar offers GM 4L85E Level 4 transmissions for a variety of rear-wheel-drive applications. They are compatible with Chevy small block Gen III/IV (LS-based) engines from 1997 and up; and select Chevy small block Gen 1 and big block Gen V, Gen VI, and Mark IV engines from 1955 and up. Performance specs include 1,500 hp and up to 1,500 lbs.-ft. of torque. Transmission details: * Converter: Custom built and custom stalled 10 or 11 in. billet yank racing * Stall: 2,600-3,600 * Master overhaul kit with alto hardened steels * Raybestos Racing Blue Gen II frictions * High-flow filter * 2 Transgo reprogramming shift kits * GearStar full race shift kit * Carbon fiber heavy-duty reverse band * Wide carbon fiber kickdown band * New bearing kit * New bushing kit * New thrust washer kit * New low roller sprag * 300M hardened input shaft * 300M hardened intermediate shaft * 300M forward hub * High-capacity pump assembly with new gears * New 5-pinion reaction planetary gear set * New 5-pinion low planetary gear set * Extra capacity 2nd gear clutch assembly * Extra capacity 3rd gear super drum with wide heavy-duty sprag, race, and modified plates * Custom machined billet forward and direct drum pistons * Heavy-duty 2nd gear apply piston * New shift solenoids * New EPC solenoid * New PWM solenoid * New manifold pressure switch * New input and output speed senor * New internal wiring harness * Updated boost valve * Updated TCC regulator valve * Blueprinted pump and valve body * Transmission mount * This transmission requires the use of a standalone controller in non-OEM applications * All transmissions are custom-built by one of five master techs from start to finish and DYNO tested with converter the equivalent of 100 miles to ensure that transmission and converter package are in perfect operating condition before they leave the GearStar facility.
Not Yet Reviewed
$11,045.00
GearStar offers GM 4L70E Level 4 transmission models for a variety of rear-wheel-drive and four-wheel-drive applications, including many Chevy small block Gen III/IV (LS-based) engines from 1997 and up. They're available in different flash stall ratings. Performance specs include: 650 hp and up to 650 lbs.-ft. torque. Transmission details: * Converter: Custom built and custom stalled 10 or 11 in. lock-up Billet Racing * Stall: 1,600-3,600 * Master overhaul kit with alto hardened steels * Raybestos Gen II racing frictions * High-capacity filter * New 29 element dual cage sprag * High-capacity upgraded pump assembly * New hardened pump rings * New 13 vane pump rotor * New vanes * New stator * .500 boost valve * Pressure regulator valve * Updated boost valve * Transgo reprogramming shift kit with shift command * Bushing kit * New thrust washers * Complete Torrington bearing kit * Heavy-duty hardened sun shell * Heavy-duty expanded capacity input drum with reinforcing sleeve * High rev spring kit * Heavy-duty 5 pinion front and rear planetary gear set with sun gear – AC Delco * 300M hardened output shaft * 300M hardened reaction shaft and hub * Super hold 4th servo * Corvette servo * Wide carbon fiber 2-4 band * New valve body spacer plate * New shift solenoids * New EPC solenoid * New PWM solenoid * New 3/2 solenoid * New manifold pressure switch * New internal wiring harness with new TCC solenoid * New electronic speed sensor * Inspection cover (polished aluminum) * New original equipment steel transmission pan * Transmission mount * This transmission requires the use of a standalone controller in non-OEM applications * All transmissions are custom built by one of five master techs from start to finish—and DYNO tested with converter the equivalent of 100 miles to ensure that transmission and converter package are in perfect operating condition before they leave the GearStar facility.
Not Yet Reviewed
$6,145.00
—
$6,645.00
GearStar offers GM 4L85E Level 3 transmissions for a variety of rear-wheel-drive applications, including many Chevy small block Gen III/IV (LS-based) engines from 1997 and up. Performance specs include: 1,000 hp and up to 1,000 lbs.-ft. or torque. Transmission details: * Converter: Custom built and custom stalled 10 or 11 in. billet Yank Racing * Stall: 2,600-3,600 * Master overhaul kit * Raybestos Racing Blue Gen II frictions * High-flow filter * 2 Transgo reprogramming shift kits * GearStar full race shift kit * High energy wide bands * New bearing kit * New bushing kit * New thrust washer kit * New low roller sprag * 300M hardened input shaft * 300M hardened intermediate shaft * 300M forward hub * High-capacity pump assembly with new gears * New 5 pinion reaction planetary gear set * New 5 pinion low planetary gear set * Extra capacity 2nd gear clutch assembly * Extra capacity 3rd gear super drum with wide heavy-duty sprag, race, and modified plates * Custom machined billet forward and direct drum pistons * Heavy-duty 2nd gear apply piston * New shift solenoids * New EPC solenoid * New PWM solenoid * New manifold pressure switch * New input and output speed senor * New internal wiring harness * Updated boost valve * Updated TCC regulator valve * Blueprinted pump and valve body * Transmission mount * This transmission requires the use of a standalone controller in non-OEM applications * All transmissions are custom built by one of five master techs from start to finish and DYNO tested with converter the equivalent of 100 miles to ensure that transmission and converter package are in perfect operating condition before they leave the GearStar facility.
Not Yet Reviewed
$10,045.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
