Availability
Showing In Stock Items. Show All 200 Items.
For a no bump steer ride, update your 1949-51 Ford steering system with UniSteer rack and pinion conversion kits. They are used to match your vehicle's factory suspension perfectly to greatly improve steering response, handling, and overall driving experience. The kits come with everything needed, minus power steering fluid and a belt, and can be made to work with the factory steering column and spindles and a flathead V8. Gain better control on the road with the use of UniSteer rack and pinion conversion kits! UniSteer stands behind their products with a 2-year, Unlimited Mile Warranty.
( 2 )
$5,763.99
BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a choice of black or polished pulley kits and 4L65/70E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * New Cast Iron 6.2L * Main caps are 6-bolt * One-piece rear main seal * Reluctor wheel – 58x * Cam sensor – 4x (in timing cover) * Knock sensor provision on side Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Ignition Timing * Firing order is 1-8-7-2-6-5-4-3 Assembled 4-speed Transmission Package: * Complete 4L65/70E package with electronic transmission controller * Torque converter with 2,200–2,400 rpm stall * Non-weighted flexplate * Starter Other Components: * Holley Terminator X Max Gen IV complete EFI engine management system, and DBW (Drive-By-Wire) pedal kit * DBW throttle body * GM Muscle-car Swap oil pan * Loaded intake manifold * Fuel injectors (EV6 type) and rail * Coil packs * Spark plugs and wires * Water pump * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys * Champion 3015 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91 octane. Recommended oil is BPP710.
Not Yet Reviewed
$22,699.00
—
$22,799.00
QA1 Mopar front street performance coilover conversion systems transform your classic Charger, Road Runner, or other classic B/E-body Mopar into a restomod that drives, corners, and launches like a modern machine. These Mopar systems feature great-looking powdercoated components that improve performance and save weight while making it easy to swap engines, including the Gen 3 Hemi. QA1 Mopar street performance systems are available with single or double adjustable shocks in kits offering 0 to 2 in. or 2 to 4 in. of drop. Features and benefits: * Coilovers help you achieve the perfect stance and ride quality * Single-adjustable shocks are recommended for cars used primarily on the street * Double-adjustable coilovers are recommended for consistent drag racing, autocross or road racing * Rack-and-pinion steering provides a modern feel and improved handling in any setting * Drastically improve geometry, enhancing driving feel and cornering capabilities * Designed for everyday driving, drag racing, and handling * Tubular design improves exhaust clearance while reducing weight * Works with multiple engine configurations
( 3 )
$5,363.95
—
$6,890.95
RideTech 1967-69 Camaro/Firebird complete coilover suspension systems include everything you need to completely upgrade your existing suspension. The package contains front upper and lower StrongArm control arms, tall spindles, front MuscleBar, a rear bolt-on 4-link, and four HQ Series coilover shocks for every corner of your vehicle. The benefit of buying a complete suspension system is that it takes all the guesswork out of what are the best parts to purchase. RideTech has spent hours collecting data to find a perfect spring rate and components for your vehicle's performance and ride quality. RideTech complete coilover systems include: * RideTech tall spindles will induce more negative camber gain to maximize tire contact patch during cornering. It also offers a 2 in. pin drop which allows for the use of longer shocks creating more suspension travel. * Upper StrongArms feature corrected ball joint angles for the tall spindles. The upper ball joints have been moved back to allow for additional caster setting to improve high speed stability and steering feel. Offset slugs are also available for additional caster. Injection molded Delrin bushings with 13 percent PTFE are used to reduce deflection and stiction. * Lower StrongArms feature a double sheer lower mount for increased strength. The lower shock mount is dropped to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Injection molded Delrin bushings with 13 percent PTFE are used to reduce deflection and stiction. * HQ Series coilover shocks utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. The rebound knob is located at the top of the shock for underhood access. * Front MuscleBar helps to reduce body roll and creates room for wider front tires. It includes the PosiLink end links that provide immediate engagement between the chassis and control arms. * Bolt-on 4-Link greatly improves traction, handling, and ride quality. Installation does not require the any major modifications to the floor pan and requires only minimal welding to the axle tube. Works with mini tubs. The R-joint rod ends combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is as home on the street as it is on the racetrack.
Not Yet Reviewed
$5,975.00
RideTech 1955-57 Chevrolet coilover suspension systems transform the ride, handling, and looks of your Tri-5. The benefits of buying these complete kits is that RideTech has done all the homework for you. They have matched the perfect spring rate and components for your Chevy's best performance and ride quality. All you do is install. Completely upgrade your existing suspension with RideTech coilover suspension systems. Features include: * Upper StrongArms are powdercoated black and fully assembled with ball joints, bushing, and cross shafts. They feature corrected ball joint angles and the upper ball joint have been moved back to allow for additional caster setting to improve high speed stability and steering feel. * Lower StrongArms feature a double sheer lower mount for increased strength. They also are powdercoated black and fully assembled with ball joints, bushing, and cross shafts. * HQ Series coilovers utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling. The rebound knob is located at the top of the shock for underhood access. * Front MuscleBar helps reduce body roll and includes the PosiLink endlinks that provide immediate engagement between the chassis and control arms. * Bolt-on 4-link greatly improves traction, handling, and ride quality.
Not Yet Reviewed
$5,400.00
The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a pulley kit and 4L65/70E automatic transmission. The aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning.
Not Yet Reviewed
$25,499.00
BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block crate engines with fuel injection are offered in two models—one with new block casting, pulleys, and other extras. SPECIFICATIONS FOR BOTH MODELS INCLUDE: * HP and Torque: 390 hp / 410 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum Heads * Hydraulic Roller Cam * Cast Iron Crankshaft * Hypereutectic Pistons * BLOCK: NEW BluePrint Cast Iron Block Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Iron Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear engine balance * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 64cc chamber 2.02 in. intake/1.60 in. exhaust valves 195cc intake/75cc exhaust runners * CAM SPECS: Cam Type: Roller .495 Intake .502 Exhaust 220 Intake / 224 Exhaust duration @ .050 - 114 degree lobe separation * IGNITION TIMING: 32 Degrees Total at 3,500 rpm * ALSO INCLUDES: Valve covers Oil pan Timing cover Harmonic Balancer Thermostat and Water neck Aluminum intake HEI distributor Spark plugs and wires EFI system Dyno test results shipped with engine INCLUDED ONLY ON MODEL BP3505CTFD: * Standard rotation long water pump INCLUDED ONLY ON NEW BLOCK CASTING MODEL BP3505CTFK: * Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump (does not fit Corvette)
( 1 )
$7,149.00
The Ridetech complete coilover suspension system for the 1964-66 Ford Mustang includes everything you need to give your vintage muscle car modern drivability. The package contains front upper and lower control arms, tall spindles, steering arms, inner and outer tie rods, front MuscleBar, a bolt-In 4=link system, and four HQ Series coilovers for every corner of your vehicle. The benefit of buying a complete suspension system is that it removes all the guesswork when purchasing a new suspension. Ridetech has spent hours collecting data to find a perfect spring rate and components for your vehicle's performance and ride quality—designed to lower your vehicle. * Upper StrongArms feature corrected ball joint angles for the tall spindles. The upper ball joint have been moved back to allow for additional caster setting to improve high-speed stability and steering feel. Billet cross-shafts are included that feature a lowered mounting point to increase camber gain and correct suspension geometry. They house a stout double sheer lower shock mount. * Lower StrongArms feature a unique design that combines the control arm and strut rod into a stronger, more appealing one-piece design. Additional caster is designed into the arms and includes a robust bearing in an aluminum housing at the front mount to replace the soft factory rubber units. * TruTurn System includes tall spindles which induce more negative camber gain to maximize tire contact patch during cornering. It also includes steering arms, center link adapter, tie rods and adjusters to virtually eliminate bump steer, correct Ackerman angle, and allow for wider tires. Includes heavy-duty frame rail brace. This spindle is designed for use with 1967-69 Camaro brake systems. Compatible with OEM manual steering AND with the Borgeson power steering conversion box. * Optional "Hub" spindles offer the same geometry improvements as the pin spindles, but add the performance and simplicity of late model Mustang hubs and brakes. Includes S550 2015-23 Mustang hubs for maximum strength, consistent braking and reduced maintenance. Compatible with 2015-23 Mustang brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. Hubs fit Ford car 5 x 4.5 in. lug pattern and include 14mm studs. * HQ Series coilovers utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling; the rebound knob is located at the top of the shock for underhood access. The shocks come standard with a 1,000,0001 Mile Warranty. Interested in Autocross or Road Course racing? Consider the TQ Series coilovers. * Front MucleBar sway bar helps reduce body roll and includes the PosiLink end links that provide immediate engagement between the chassis and control arms. Includes billet aluminum frame straps (anodized black) and low-friction bushings. * Bolt-on 4-link dramatically improves traction, handling, and ride quality. Installation does not require significant modifications to the floor pan and requires only minimal welding to the axle tube. Works with mini-tubs. All links are double adjustable with R-Joint rod ends, which combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is at home on the street as it is on the race track! * Weld-on lower axle brackets are available if using an aftermarket axle housing without stock-style leaf spring pads. (Part number 70010122, sold separately.)
Not Yet Reviewed
$7,670.00
Detroit Speed Chevy II subframes are bolt-in replacements for the original stock subframe. They improve the handling and ride quality by utilizing Detroit Speed's unique suspension geometry. These are the ONLY Chevy II frames in the aftermarket industry with OEM-quality stamped crossmembers for improved structural rigidity. The bay bars feature rigid integral hood hinge mounting and are hidden when used with Detroit Speed's Chevy II Inner Fenders package. Order the Chevy II front frame model with the coilover options preferred for your application. Subframe suspension kits include the following components: * Tubular upper and lower control arms * Aluminum body coilover shocks * Torrington bearings * Coilover springs * Power rack and pinion steering * Integrated splined sway bar * Control arm cross shafts with caster tuner bushings • Forged Detroit Speed spindle • Composite sway bar bushings • Spanner tool for easy shock adjustments
Not Yet Reviewed
$10,295.95
Detroit Speed offers Fox Body short long arm conversion systems for a variety of applications, including many Ford Mustang and Mercury Capri models from the 1970s, '80s, and '90s. These suspension kits redefine Fox Body handling with a no-compromise double wishbone design. They system replace the outdated factory suspension with modern geometry, increased strength, and race-proven adjustability—delivering premium fit, finish, and performance. * SUPERIOR SUSPENSION GEOMETRY and STABILITY: Detroit Speed's exclusive frame rail insert optimizes camber gain and roll center height, significantly improving front-end stability. The tubular upper and lower control arms reduce deflection, providing precise suspension movement and sharper handling response. * FORGED UPRIGHTS & EXPANDED BRAKE OPTIONS: Lightweight forged aluminum uprights feature modern hub-pack bearings for durability and reduced maintenance. This setup provides access to high-performance braking solutions for superior stopping power. * MAXIMIZED TIRE CLEARANCE: Designed for serious performance applications, these systems allow clearance for 275/35R18 tires on a 10 in. rim while maintaining full steering lock. Whether on the street or track, this setup ensures maximum grip without compromise. * FACTORY COMPATIBILITY, PERFORMANCE UPGRADE: These systems are optimized for factory 1987-93 V8 K-members and aftermarket K-members, ensuring seamless integration into high-performance builds. Some fabrication is required, but the result is a modernized, precision-tuned suspension that outperforms factory limitations. Available versions: * Single-Adjustable Coilover Control (032096-SDS): Detroit Speed/JRi aluminum coilovers offer Detroit Tuned valving for precision damping control with a single adjustment to fine-tune rebound. Combined with a 1 7/16 in. diameter adjustable-rate sway bar, this system delivers unmatched street and track performance. * Double-Adjustable Coilover Control (032096-DDS): Detroit Speed/JRi double-adjustable aluminum coilovers feature Detroit Tuned valving, allowing independent tuning of high and low speed rebound for maximum control. Paired with a 1 7/16 in. adjustable-rate sway bar, this system delivers fully customizable handling for both street and track applications. * Non-Adjustable High Performance Coilover Control (032096DS): Detroit Speed/JRi non-adjustable aluminum coilovers feature Detroit Tuned valving, delivering precision damping. Paired with a 1 7/16 in. diameter sway bar, this system provides optimized handling and stability for both street and track applications. FEATURES AND BENEFITS: • Optimized camber gain and roll center height for better handling stability • Tubular upper and lower control arms improve suspension geometry and reduce deflection • Forged aluminum uprights with modern hub-pack bearings for durability and reduced maintenance • Adjustable 1 7/16 in. diameter sway bar for improved front-end response • Clearance for up to 275/35R18 tires while maintaining full steering lock • Detroit Speed/JRi aluminum coilover shocks for precision damping (options): -- Single-adjustable -- Double-adjustable -- Non-adjustable
Not Yet Reviewed
$5,459.95
—
$6,820.95
RideTech 1965-66 GM B-body coilover suspension systems include everything needed to provide a lowered stance with dramatically improved handling and ride quality. Engineered by RideTech and wound by Hyperco, the rear coil springs offer the perfect lowered stance. Hyperco springs are CNC cold-wound and machined from high-tensile chrome silicon steel—the highest grade spring material available. Enjoy RideTech's passionate commitment to finding the perfect spring rate and components for your vehicle in their 1965-66 Chevrolet coilover suspension kits. Features, items, and specs: * For cars with two rear upper control arms, an additional StrongArm is required * Black powdercoated upper StrongArms feature corrected ball joint angles, and are fully assembled with ball joints, bushing, and cross shafts * Upper ball joints moved back to allow for additional caster setting (improves high speed stability and steering feel) * Black powdercoated lower StrongArms feature a double-sheer lower mount for increased strength, and are fully assembled with ball joints, bushing, and cross shafts * Both front coilovers and rear shocks utilize an impact-forged aluminum body and monotube design to allow fine-tuning—and deliver excellent ride quality and handling with a 1,000,0001 mile warranty (rebound knob located on top of front shocks for underhood access) * Hyperco springs provide a consistent spring rate that will last a lifetime * Front and rear MuscleBars help reduce body roll and include PosiLink endlinks that provide immediate engagement between chassis and control arms * Rear StrongArms provide added strength to help get the power to the pavement * Upper arm and panhard bar utilize R-joint technology to provide smooth operation and reduce roll bind
Not Yet Reviewed
$5,330.00
RideTech 1964-67 GM A-body coilover suspension systems are specifically designed for the 1964-67 GM A-body platform. The package contains front upper and lower control arms, tall spindles, front and rear MuscleBars, rear StrongArms, and four HQ Series coilovers. RideTech 1964-67 GM A-body coilover suspension kits include everything needed to create modern drivability from vintage muscle. Features, parts, and specs: * Tall spindles will induce more negative camber gain to maximize tire contact patch during cornering (they also offer a 2 in. pin drop which allows for longer shocks creating more suspension travel) * Upper StrongArms feature corrected ball joint angles for the tall spindles * Upper ball joints have been moved back to allow for additional caster setting (improves high speed stability and steering feel; offset slugs available for additional caster) * Injection-molded Delrin bushings with 13 percent PTFE used to reduce deflection and stiction * Lower StrongArms feature a double-sheer lower mount for increased strength * Dropped lower shock mount to increase suspension travel * Lower ball joint moved forward to increase caster settings, while keeping the wheel centered in the wheel opening * HQ Series Shockwaves allow fine-tuning and deliver excellent ride quality and handling with a 1,000,0001 mile warranty (rebound knob located on top of shock for underhood access) * Brackets included with rear coilovers for easy attachment to the frame and the 10/12 bolt rear-end or Currie 9 in. (brackets for a Moser rear-end also available) * Front MuscleBar helps reduce body roll and creates room for wider front tires (includes PosiLink endlinks that provide immediate engagement between chassis and control arms) * Rear StrongArms provide added strength to help get the power to the pavement; they utilize R-joint technology to combine the best qualities of low-friction movement, lateral stability, full range articulation, and quiet operation into one special bearing
Not Yet Reviewed
$5,645.00
RideTech 1968-72 GM A-body complete coilover systems include everything necessary to create modern drivability for your vintage GM muscle car. All the parts are designed to maximize tire contact, while providing high-speed stability and steering feel. The included rear StrongArms utilize RideTech's innovative R-Joint technology—combining the best qualities of low-friction movement, lateral stability, full-range articulation, and quiet operation in one bearing. Take the guesswork out of purchasing a new suspension for your classic with a RideTech complete coilover system. Kit items, features, and specs: * Front upper and lower control arms * Tall spindles induce more negative camber gain, allowing tires to lean into the turn—and allowing for longer shocks and more suspension travel * Upper and lower front StrongArms include Delrin bushings to reduce deflection and stiction * Four HQ Series coilovers allow fine tuning via rebound knob at the top of the shock; they come standard with a 1,000,0001-mile warranty * Brackets included with rear coilovers for easy attachment to frame and rear-end * Front MuscleBar helps reduce body roll, creates room for wider front tires, and includes PosiLink end links for immediate engagement between chassis and control arms * Adjustable-rate rear MuscleBar
Not Yet Reviewed
$5,645.00
RideTech 1967-70 Cougar coilover suspension systems include everything you need to give your vintage Cougar modern drivability. These packages contain front upper and lower control arms, tall spindles, steering arms, inner and outer tie rods, a front MuscleBar, a bolt-in 4-link system, and four HQ Series coilovers for every corner of your vehicle. The bolt-on 4-link vastly improves traction, handling, and ride quality. Installation doesn't require any major modifications to the floor pan and requires only minimal welding to the axle tube (works with mini tubs). The R-joint rod ends combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing. RideTech 1967-70 Cougar coilover suspension systems are as comfortable on the street as they are on the racetrack! Features, items, and specs: * Upper StrongArms feature corrected ball joint angles for the tall spindles * Upper ball joint moved back to allow for additional caster setting (improves high-speed stability and steering feel) * Billet cross shafts feature a lowered mounting point to increase camber gain and correct suspension geometry (they house a stout double-sheer lower shock mount) * Lower StrongArms feature a unique design that combines the control and strut rod into a stronger, more appealing one-piece design * Additional caster designed into the arms * Robust bearing in an aluminum housing at the front mount to replace the soft factory rubber units * HQ Series coilovers allow fine-tuning and deliver excellent ride quality and handling with a 1,000,0001 mile warranty (rebound knob located on top of front coilovers for underhood access) * Front MuscleBar helps reduce body roll and includes PosiLink endlinks that provide immediate engagement between chassis and control arms
Not Yet Reviewed
$6,130.00
RideTech subframes deliver several key improvements over the original and some existing aftermarket subframes. Optimized suspension geometry, improved wheel and tire clearance, and rack and pinion steering technology, plus many more features will surely put RideTech's subframes on the top of your builder's wish list. Select the kit with the preferred spindles. Features and benefits: * Optimized geometry provides improved roll center, Ackermann, camber gain, caster and bump steer * Lowers stance 1 to 3 in. and maintains factory track width while increasing wheel and tire clearance * 2 in. more tire clearance per side over stock subframe allows better turning radius with larger tires/wheels * Fits up to 6.5 in. BS with no modifications or reduction in turning radius * Rack and pinion steering upgrade provides improved steering feel, enhancing driver feedback * Modular design is compatible with coilovers or ShockWaves (sold separately) * Subframe features durable powdercoat finish for great, long-lasting good looks and corrosion resistance * Available with AFX pin or late model hub spindle design -- Hub spindle allows install of modern C5/C6 Corvette brakes and C5/C6/C7 hubs (hubs not included) -- Pin spindle is compatible with stock style brakes (including aftermarket kits that fit stock spindle) * One-piece billet 6061 T-6 aluminum upper control arms and steering arms add superior strength * Larger front sway bar controls body roll, improving weight transfer * Tubular lower control arms include eccentric adjustment for caster and camber adjustments * Alignment adjustments are made complete under the car --no adjustments inside engine bay * Multiple motor mount options * Included adjustable transmission crossmember compatible with most popular manual and automatic transmissions * Improved header clearance and exhaust routing allow for a variety exhaust solutions
Not Yet Reviewed
$6,495.00
—
$6,645.00
The RideTech 1970-81 Camaro/Firebird Complete CoilOver suspension systems include everything you need to completely upgrade your existing suspension. The package contains front upper and lower StrongArm control-arms, front MuscleBar, a rear Bolt On 4-Link, and 4 HQ Series CoilOvers shocks for every corner of your vehicle. The benefit of buying a complete suspension system is that it takes all of the guesswork out when purchasing a new suspension. RideTech has spent hours collecting data to find a perfect spring rate and components for your vehicle's performance and ride quality. RideTech Complete CoilOver systems include: - Upper StrongArms feature corrected ball joint angles for the tall spindles. The upper ball joints have been moved back to allow for additional caster setting to improve high speed stability and steering feel. Offset slugs are also available for additional caster. Injection molded Delrin bushings with 13% Teflon are used to reduce deflection and stiction. - Lower StrongArms feature a double sheer lower mount for increased strength. We have also dropped the lower shock mount to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Injection molded Delrin bushings with 13% Teflon are used to reduce deflection and stiction. - HQ Series CoilOver shocks utilize an impact forged aluminum body and Monotube design to deliver excellent ride quality and handling. They allow fine tuning of the ride quality and handling. The rebound knob is located at the top of the shock for under hood access. - Front MuscleBar helps to reduce body roll and creates room for wider front tires. It includes the PosiLink endlinks that provide immediate engagement between the chassis and control arms. - Bolt On 4-Link greatly improves traction, handling and ride quality. Installation does not require the any major modifications to the floor pan and requires only minimal welding to the axle tube. Equally important, the unique design addresses production variations and frame rail thickness issues that are common to the second-generation F-Body platform. Works with minitubs. The R-Joint rod ends combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is as home on the street as it is on the racetrack!
Not Yet Reviewed
$5,605.00
Bolt some serious power into your ride with these BluePrint Engines GM 383 c.i.d. 436 hp dressed stroker long block crate engines. These engines are built from the ground up to provide a reliable 436 hp and 443 lbs.-ft. of torque to power your street rod, muscle car or any other project that needs serious power. Each engine is hand-assembled, and precision balanced to ensure it will run smooth and strong for years to come. BluePrint GM 383 c.i.d. 436 hp dressed stroker crate engines include: * 4-bolt main block * New cast crankshaft * Hypereutectic pistons * Chevy heavy beam rods with 150,000 psi bolts * Moly rings * Balanced rotating assembly * Melling high-volume oil pump * Hydraulic Roller lifter camshaft * Heavy-duty double roller timing set * Aluminum cylinder heads * Hardened retainers and springs * Swirl polished intake and exhaust valves * Hardened pushrods * Dual plane satin finish intake manifold * Carburetion * Distributor, plug wires and plugs * Water pump * New valve covers * Brass freeze plugs * Front accessory drive with water pump, A/C compressor, alternator, and power steering pump * Dyno tested—and shipped with results
( 1 )
$7,999.00
BluePrint Builder Series 302W/365HP Bronco Edition EFI crate engine and 4R70W transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Ford small block-compatible 302 (c.i.d.) engine that produces 365 horsepower, this Bronco edition builder series includes a black pulley kit and 4R70W automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.0:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and steel crankshaft. Altogether, this assembly produces 365 lbs.-ft. of torque. When you need or want a new powertrain for your Ford Bronco, go with the authority in crate engines and their BluePrint Builder Series 302W/365HP Bronco Edition EFI crate engine and 4R70W transmission combos. Other product features, items, and specifications include: Block: * New BluePrint cast iron * Main caps are 4-bolt * Bore is 4.000 in. * One-piece rear main seal Rotating Assembly: * Cast steel crankshaft * Stroke – 3.000 in. (and OEM-style 5.090 in. connecting rods) * Hypereutectic pistons * Externally balanced BPP50 harmonic balancer Cylinder Heads: * BluePrint HP9009 models * Chamber – 60cc * Valves are 2.020 in. intake and 1.600 in. exhaust * Exhaust runners are 190cc intake and 60cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.533 in. * Exhaust valve lift – 0.544 in. * Intake duration at 0.050 in. of lift – 215 * Exhaust duration at 0.050 in. of lift - 220 * Lobe separation angle (LSA) – 114 degrees Ignition Timing * Initial is 10-16 degrees * Will be 34 degrees total at 3,500 rpm * Total is 32-34 degrees * Firing order is 1-3-7-2-6-5-4-8 Complete 4WD-ready 4R70W Transmission (built to 650 horsepower): * Electronic transmission controller and TPS breakout harness for integration with controller * Torque converter with 2,200 – 2,600 rpm stall * Flexplate * Starter * This 4-speed overdrive transmission with lockup is specifically prepped for a 1966-76 Dana 20 transfer case (sold separately) * Gear ratios are 2.84:1 (first), 1.55:1 (second), 1.00:1 (third), 0.70:1 (overdrive), and 2.32:1 (reverse) Other Components: * Dual plane aluminum intake manifold with satin finish * Complete fuel injection system * Distributor * Valve covers * Rear sump oil pan * Billet aluminum front accessory drive with black finish (includes A/C and power steering) * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) Note: Not intended for use in controlled vehicles. Recommended fuel is 91 octane. Recommended oil is non-synthetic 10W30. Not designed for EGR compatibility.
Not Yet Reviewed
$20,199.00
RideTech 1967-70 GM B-body coilover suspension systems include everything needed to provide a lowered stance with dramatically improved handling and ride quality. These complete kits contain StrongArms, MuscleBar sway bars, and HQ Series coilovers, removing the guesswork out of purchasing the right components that will deliver the best performance and ride quality. Features include: * Upper StrongArms--powdercoated black and fully assembled with ball joints, bushing, and cross shafts. They feature corrected ball joint angles and the upper ball joint have been moved back to allow for additional caster setting to improve high speed stability and steering feel. * Lower StrongArms--double sheer lower mount for increased strength. They are powdercoated black and fully assembled with ball joints, bushing, and cross shafts. * HQ Series coilovers--utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling via rebound knob located at the top of the shock for underhood access. * Hyperco springs are used to provide a consistent spring rate that will last a lifetime. * Front MuscleBar helps reduce body roll and includes the PosiLink endlinks that provide immediate engagement between the chassis and control arms. * Rear MuscleBar allows for fine tuning by sliding the arm on the bar to increase or decrease rate * Rear StrongArms provide added strength to get power to the pavement. R-Joint technology provides smooth operation and reduced roll bind. Lower is double sheer mount for coilovers, locating them in place of the stock springs. Upper arm and panhard bar are adjustable, allowing axle to be centered and pinion angle to be set.
Not Yet Reviewed
$5,330.00
BluePrint Builder Series 347W/415HP Standard Edition EFI crate engine and 4R70W transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Ford small block-compatible 347 (c.i.d.) engine that produces 415 horsepower, this standard edition builder series includes a polished pulley kit and 4R70W automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and steel crankshaft. Altogether, this assembly produces 415 lbs.-ft. of torque. When you need or want a new powertrain for your Blue Oval ride, go with the authority in crate engines and their BluePrint Builder Series 347W/415HP Standard Edition EFI crate engine and 4R70W transmission combos. Other product features, items, and specifications include: Block: * New BluePrint high-strength cast iron * Increased deck thickness and strength webbing * Priority main oiling * Main caps are 4-bolt * Improved water jacket design * One-piece rear main seal Rotating Assembly: * Cast steel crankshaft * Stroke – 3.400 in. * Forged I-beam 5.400 in. connecting rods * Forged pistons * Externally balanced BPP28 harmonic balancer Cylinder Heads: * BluePrint HP9009 models * Chamber – 60cc * Valves are 2.020 in. intake and 1.600 in. exhaust * Exhaust runners are 190cc intake and 65cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.543 in. * Exhaust valve lift – 0.554 in. * Intake duration at 0.050 in. of lift – 218 * Exhaust duration at 0.050 in. of lift - 226 * Lobe separation angle (LSA) – 112 degrees Ignition Timing * Initial is 10-16 degrees * Will be 34 degrees total at 3,500 rpm * Total is 32-34 degrees * Firing order is 1-3-7-2-6-5-4-8 Complete 4R70W Transmission Package (built to 650 horsepower): * Electronic transmission controller and TPS harness for integration with controller and EFI * Torque converter with 2,200 – 2,600 rpm stall * Flexplate * Starter * This is a 4-speed overdrive transmission with lockup * Gear ratios are 2.84:1 (first), 1.55:1 (second), 1.00:1 (third), 0.70:1 (overdrive), and 2.32:1 (reverse) Other Components: * Dual plane aluminum intake manifold with satin finish * Complete fuel injection system * Pro Billet distributor * Mustang-style valve covers * Oil pan with 7-quart capacity * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) Note: Factory 5 applications are a special order (must call). Recommended fuel is 91 octane. Recommended oil is non-synthetic 10W30. Not designed for EGR compatibility.
Not Yet Reviewed
$20,949.00
BluePrint Engines Chrysler 408 C.I.D. 465 hp dressed long block crate engines are fully Dyno tested, passed vigorous inspections, and ready to power up your project. These Mopar compatible crate engines are ready to replace your tired Charger, Dart, Roadrunner, or Barracuda powerplant. There's no replacement for displacement, and replacing a little 273, 318, or 360 with a Blueprint 408 stroker crate engine will have your back tires up in smoke in no time! They are offered with a polished or black finished serpentine 8-rib front pulley kit. Features, specs, and contents: * Horsepower and torque: 465 hp/494 lb.-ft. * Handpicked seasoned Magnum block * Cylinders honed to within .0002 straightness and roundness * 2-bolt main * 4.000 in. bored .040 in. over * Cast steel crankshaft * 4.000 in. stroke * Forged Magnum 6.123 in. connecting rods with 150,000 psi bolts * Forged pistons * Aluminum Magnum pattern cylinder heads--58cc chamber * Aluminum roller rockers * 2.02 in. intake/1.60 in. exhaust valves * 176cc intake/75cc exhaust runners * Roller cam * .580 intake/.577 exhaust * 235 intake/242 exhaust duration at .050 * 110 degree lobe separation * Valve covers, oil pan, timing cover, water pump, plugs, wires, distributor, water neck, thermostat, fuel pump and fuel line, harmonic balancer, air cleaner * Power steering pump: Type II with -6AN pressure, -10AN return, 1,400 psi * Air conditioning compressor: 7B10 Peanut-style * 30 month/50,000 mile warranty
Not Yet Reviewed
$11,599.00
RideTech 1967-69 Camaro / Firebird HQ coilover systems include everything you need to upgrade your existing suspension and give your muscle car an aggressive lowered stance with modern drivability. The packages contain front upper and lower control arms, tall spindles, a front sway bar, a rear 4-link, and four HQ Series coilovers for every corner of your vehicle. Buying a complete suspension system removes all the guesswork. Ridetech has spent hours collecting data to find a perfect spring rate and components for your vehicle's performance and ride quality. Product features: * Tall "pin" spindles will induce more negative camber gain to maximize tire contact patch during cornering. They also offer a 2 in. drop—which allows for the use of longer shocks, creating more suspension travel. Compatible with all brake kits designed to fit the stock disc brake spindle. * Optional "hub" spindles offer the same geometry improvements as the pin spindle but add the performance and simplicity of late model Corvette hubs and brakes. Uses C5/C6/C7 Corvette hubs for maximum strength, consistent braking and reduced maintenance. (Hubs not included.) Compatible with C5/C6 Corvette brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. * Upper StrongArms feature corrected ball joint angles for the tall spindles. The upper ball joints have been moved back to allow additional caster settings to improve high-speed stability and steering feel. Offset slugs are also available for additional caster. Injection-molded Delrin© bushings with 13 percent PTFE reduce deflection and stiction. * Lower StrongArms feature a double sheer lower mount for increased strength. RideTech has also dropped the lower shock mount to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Injection-molded Delrin© bushings with 13 percent PTFE are used to reduce deflection and stiction. * HQ Series coilovers utilize an impact-forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling via the rebound adjustment knob, located at the top of the shock, for under-the-hood access. They come standard with a 1,000,0001 Mile Warranty. * Front sway bar reduces body roll and creates room for wider front tires. Includes billet aluminum frame straps (anodized black) and low friction bushings. * Bolt-on 4-link dramatically improves traction, handling, and ride quality. Installation does not require significant modifications to the floor pan and requires only minimal welding to the axle tube. Works with mini-tubs. All links are double adjustable with R-joint rod ends, which combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special street/strip bearing. Upgrades: * TruTurn System: The early Camaro/Nova front-ends have very poor suspension geometry; the tires lean outward around turns, the bump steer is terrible, and there's little room to run a wide wheel because of the OEM steering arm interference with the inside of the wheel. The Tru Turn system resolves ALL these issues; the tires now lean INTO the turn, the bump steer is UNDER .050 in. through 5 in. of suspension travel, and you now have clearance to run up to a 10 in. wide wheel with a 275mm tire! Compatible with both the Ridetech "pin" and "hub" spindles. * Rear sway bar: The addition of the rear sway bar is for the true track car. Wide tires plus big horsepower typically mean faster corner speeds. The MuscleBar sway bar helps keep those rear tires hooked up through the corner. * Weld-on lower axle brackets are available for aftermarket axle housing without stock-style leaf spring pads. Part number 70010122 is sold separately.
Not Yet Reviewed
$6,125.00
Detroit Speed SpeedMAX front suspension packages are designed with no compromises and exclusive DSE suspension geometry for superior handing and ride quality at a lowered ride height. These kits are 100 percent bolt-on front suspension systems, based on the later model GMT800 Silverado truck applications. Kits include DSE forged aluminum uprights with modern truck hub pack wheel bearings. These kits can be installed in stock location or 1 in. forward for improved wheel and fender alignment. the DSE "Detroit Tuned" aluminum body coilover shocks and springs allow for ride height adjustment and spring rate tuning without having to disassemble the control arms. Body panels and engine do not need to be removed for installation of these SpeedMAX suspension kits. Additional product details: * Packages are offered with single adjustable, double-adjustable, or non-adjustable shocks (please specify application needed when ordering) * Body panels and engine do not need to be removed for installation * Features "Detroit Tuned" GMT800 rack and pinion steering * Includes sway bar with improved design/rate over optional factory bar using polyurethane bushings and low friction modern aluminum end links (uses tubular upper and lower control arms with Delrin bushings that are designed for trucks) *Features ADI (Austempered Ductile Iron) upper shock bracket that uses a heat-treated, high strength cast iron for fatigue strength and wear resistance * Stainless steel upper control arm cross shafts feature caster tuner bushings
Not Yet Reviewed
$7,237.95
BluePrint Builder Series LS427/625HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 625 horsepower, this standard edition builder series includes a polished pulley kit and 4L65/70E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 565 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/625HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * OEM style (4.060 in. bored to 4.069 in.) * Main caps are 6-bolt * One-piece rear main seal Rotating Assembly: * New forged crankshaft * Stroke – 4.125 in. * Forged connecting rods (6.125 in.) * Forged pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.624 in. * Exhaust valve lift – 0.624 in. * Intake duration at 0.050 in. of lift – 239 * Exhaust duration at 0.050 in. of lift - 255 * Lobe separation angle (LSA) – 114 degrees Ignition Timing * ECM supplied with calibration (initial and total timing are controlled by PCM) * Firing order is 1-8-7-2-6-5-4-3 Assembled 4-speed Transmission Package: * Complete 4L65/70E package with electronic transmission controller * Torque converter with 2,200–2,400 rpm stall * Non-weighted flexplate * Starter Other Components: * All required (to make engine run) sensors and wiring harness (LS controller package only controls engine) * Unlocked ECU for local Dyno shop tuning refinement * LT4 87mm DBW (Drive-By-Wire) throttle body * Valve covers, retro-fit oil pan (fits most 1955-95 GM front engine, RWD, V8 cars), and timing cover * LS3 car intake manifold * Fuel injectors (42 lbs.) and return-less fuel rail * Coil packs * Spark plug wires * Gas/throttle pedal * Complete front accessory drive includes A/C, power steering, alternator, belts, and pulleys * ACDelco 41-985 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91-93 octane. Recommended oil is BPP710. Not designed for use with dry sump or pollution-controlled vehicles.
Not Yet Reviewed
$26,499.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
