Free Shipping on Orders Over $125 at Summit Racing

Ridetech 1955-57 Chevy Air Suspension Systems

Ridetech 1955-57 Chevy air suspension systems enable you to achieve that ultra-low show stance while providing excellent ride quality and handling. They're available to fit a variety of Tri-Five models. Choose the air suspension system recommended for your year/make/model. Some kits may vary depending on your specific application. The Ridetech 1955-57 Chevy air suspension systems feature: * Upper Strongarms (powdercoated black and fully assembled with ball joints, bushing and cross shafts, ready for installation) * Lower Strongarms (powdercoated black and fully assembled with ball joints, bushing and cross shafts, ready for installation) * HQ Series Shockwaves utilize an impact forged aluminum body and Monotube design to deliver excellent ride quality and handling * Front MUSCLEBar: helps reduce body roll and includes PosiLink end links that provide immediate engagement between the chassis and control arms * Bolt-on 4-link greatly improves traction, handling and ride quality (R-Joint rod ends combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing) Important note: Control system not included. To complete the air suspension system, a Ridetech compressor system is required. Helpful note: To determine the difference between 1-piece and 2-piece frames on the 1955, 1956 and 1957 cars, look at the bottom of the main frame rail under the driver's door area. * The 1-piece frame cars the bottom of the frame will be flat and smooth, and is often called the "California" frame * The 2-piece frame design has a rough weld seam right down the bottom center of the frame rail front to rear

Not Yet Reviewed

$5,590.00

Ridetech 1967-69 Camaro/Firebird HQ Coil-Over Systems

Ridetech 1967-69 Camaro / Firebird HQ coilover systems include everything you need to upgrade your existing suspension and give your muscle car an aggressive lowered stance with modern drivability. The packages contain front upper and lower control arms, tall spindles, a front sway bar, a rear 4-link, and four HQ Series coilovers for every corner of your vehicle. Buying a complete suspension system removes all the guesswork. Ridetech has spent hours collecting data to find a perfect spring rate and components for your vehicle's performance and ride quality. Product features: * Tall "pin" spindles will induce more negative camber gain to maximize tire contact patch during cornering. They also offer a 2 in. drop—which allows for the use of longer shocks, creating more suspension travel. Compatible with all brake kits designed to fit the stock disc brake spindle. * Optional "hub" spindles offer the same geometry improvements as the pin spindle but add the performance and simplicity of late model Corvette hubs and brakes. Uses C5/C6/C7 Corvette hubs for maximum strength, consistent braking and reduced maintenance. (Hubs not included.) Compatible with C5/C6 Corvette brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. * Upper Strongarms feature corrected ball joint angles for the tall spindles. The upper ball joints have been moved back to allow additional caster settings to improve high-speed stability and steering feel. Offset slugs are also available for additional caster. Injection-molded Delrin© bushings with 13 percent PTFE reduce deflection and stiction. * Lower Strongarms feature a double sheer lower mount for increased strength. Ridetech has also dropped the lower shock mount to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Injection-molded Delrin© bushings with 13 percent PTFE are used to reduce deflection and stiction. * HQ Series coilovers utilize an impact-forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling via the rebound adjustment knob, located at the top of the shock, for under-the-hood access. They come standard with a 1,000,0001 Mile Warranty. * Front sway bar reduces body roll and creates room for wider front tires. Includes billet aluminum frame straps (anodized black) and low friction bushings. * Bolt-on 4-link dramatically improves traction, handling, and ride quality. Installation does not require significant modifications to the floor pan and requires only minimal welding to the axle tube. Works with mini-tubs. All links are double adjustable with R-joint rod ends, which combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special street/strip bearing. Upgrades: * Tru-Turn System: The early Camaro/Nova front-ends have very poor suspension geometry; the tires lean outward around turns, the bump steer is terrible, and there's little room to run a wide wheel because of the OEM steering arm interference with the inside of the wheel. The Tru-Turn system resolves ALL these issues; the tires now lean INTO the turn, the bump steer is UNDER .050 in. through 5 in. of suspension travel, and you now have clearance to run up to a 10 in. wide wheel with a 275mm tire! Compatible with both the Ridetech "pin" and "hub" spindles. * Rear sway bar: The addition of the rear sway bar is for the true track car. Wide tires plus big horsepower typically mean faster corner speeds. The MUSCLEBar sway bar helps keep those rear tires hooked up through the corner. * Weld-on lower axle brackets are available for aftermarket axle housing without stock-style leaf spring pads. Part number 70010122 is sold separately.

Not Yet Reviewed

$6,125.00

AccuAir Suspension Jeep Dynamic Lift Kit Systems

Find adventure with AccuAir Suspension's advanced and proven dynamic lift kit systems for Jeeps--complete kits that allow for total versatility when it comes to on and off-road fun. And, while air springs and air lift kits are not common on Jeep suspensions, these kits give you capabilities no other Jeep has. More than a lift to ride higher and more comfortably than factory spring and shock kits; with AccuAir dynamic lift kits you will have the option to raise and lower your Jeep at the push of a button. AccuAir dynamic lift kit systems lower to stock level for garage entry then automatically adjusts to 3.5 in. of lift. While off-roading under 25 mph the Jeep can be adjusted to 5.5 in. of lift. The underbody mounted air tank is regulated onboard air for inflating tires and tools. The system automatically adjusts to optimal ride height at speeds above 25 mph. These dynamic lift kits will auto level your vehicle, a must when towing, and overlanding enthusiasts can easily level their Jeep for overnight stops. The fully bolt-on system includes new lower control arms, sway bar links, and front track bar for increased strength and FMVSS 126 compliant handling. Each system includes JRi shocks and AccuAir e-Level Plus control system, which can be controlled via a hardwired Touchpad+ or by Bluetooth through the ePlus app. Choose the AccuAir dynamic lift kit packaged for your Jeep.

Not Yet Reviewed

$5,499.99

—

$7,499.99

Ridetech 1973-87 C-10 Air Suspension Systems

Now is the time to get your pickup truck riding smoothly with a Ridetech 1973-87 C-10 air suspension system! These systems include front/rear shocks, front upper/lower Strongarms, drop spindles, a front MUSCLEBar, and a bolt-on 4-link. Do not let other suspension systems fool you into thinking otherwise--a Ridetech air suspension system is the only way to go. These systems are specifically designed for your ride, so there is no worry when it comes to proper fitment or installation.

Not Yet Reviewed

$7,240.00

Ridetech 1967-69 Camaro/Firebird HQ Air Suspension Systems

Ridetech offers HQ air suspension systems for 1967-69 Camaro and Firebird (GM F-Body) applications. These Air Ride adjustable suspensions enable you to raise or lower your muscle car at the push of a button. The systems include front and rear HQ Series Shockwaves with adjustable rebound, plus upper and lower Strongarm front control arms, tall spindles, a bolt-on 4-link, and a front MUSCLEBar sway bar. Air Ride provides ultra-low show stance with modern ride quality and handling—and includes several components that will dramatically improve the suspension geometry to give your classic muscle car modern drivability. Systems are available with "pin" or "hub" spindles. Product features: * Tall "pin" spindles will induce more negative camber gain to maximize tire contact patch during cornering. They also offer a 2 in. drop—which allows for the use of longer shocks, creating more suspension travel. Compatible with all brake kits designed to fit the stock disc brake spindle. * OR … "hub" spindles offer the same geometry improvements as the pin spindle but add the performance and simplicity of late-model Corvette hubs and brakes. Uses C5/C6/C7 Corvette hubs for maximum strength, consistent braking, and reduced maintenance. (Hubs not included). Compatible with C5/C6 Corvette brake systems, OE, and aftermarket (caliper brackets included). Minimum 17 in. wheels. * The upper Strongarms feature corrected ball joint angles for the tall spindles. The upper ball joints have been moved back to allow for additional caster settings to improve high-speed stability and steering feel. Offset slugs are also available for additional caster. Delrin© bushings with 13 percent PTFE are used to reduce deflection and stiction. * The lower Strongarms feature a double sheer lower mount for increased strength. Ridetech has also dropped the lower shock mount to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Delrin© bushings with 13 percent PTFE are used to reduce deflection and stiction. * HQ Series Shockwaves utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling. The rebound knob is at the top of the shock for easy underhood access. * Front sway bar reduces body roll and creates room for wider front tires. Includes billet aluminum frame straps (anodized black) and low friction bushings. * The bolt-on 4-link dramatically improves traction, handling, and ride quality. Installation does not require significant modifications to the floor pan and requires only minimal welding to the axle tube. Works with mini-tubs. All links are double adjustable with R-joint rod ends, combining the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special street/strip bearing. Upgrades: * Early Camaro/Nova front-ends have very poor suspension geometry—the tires lean outward around turns, the bump steer is bad, and there's little room to run a wide wheel because of the OEM steering arm interference with the inside of the wheel. The Tru-Turn System resolves ALL these issues; the tires now lean INTO the turn, the bump steer is UNDER .050 in. through 5 in. of suspension travel, and you now have clearance to run up to a 10 in. wide wheel with a 275mm tire! Compatible with both the Ridetech "pin" and "hub" spindles. * The addition of the rear sway bar is for the true track car. Wide tires plus big horsepower typically means faster corner speeds. The MUSCLEBar sway bar helps keep those rear tires hooked up through the corner. * Compressor Sytems: Ridetech offers its Ridepro E5 air suspension control system as a pre-assembled, all-in-one module as the "Airpod"; or you can purchase the Ridepro E5 system as a component kit to install how you like.

Not Yet Reviewed

$6,165.00

—

$6,315.00

Ridetech 1964-66 Mustang Air Suspension Systems

Ridetech 1964-66 Mustang air suspension systems are the perfect choice to deliver modern ride quality and handling to your classic muscle car, while providing an ultra-low show stance. (To complete this air suspension system, a Ridetech compressor system is required/recommended.) Ridetech 1964-66 Mustang air suspension systems include: * Upper Strongarms: feature corrected ball joint angles for the tall spindles (the upper ball joint has been moved back to allow for additional caster setting, which improves high-speed stability and steering feel). Billet cross shafts are included, with a lowered mounting point to increase camber gain and correct suspension geometry; they house a stout double sheer lower shock mount * Lower Strongarms: feature a unique design that combines the control and strut rod into a stronger, more appealing one-piece design. (Additional caster is designed into the arms, and includes a robust bearing in aluminum housing at the front mount to replace the soft factory rubber units) * Tru-Turn System: includes tall spindles, which induce more negative camber gain to maximize tire contact patch during cornering (also includes steering arms, center link adapter, tie rods and adjusters—to virtually eliminate bump steer, correct Ackerman angle, and allow for wider tires). This spindle is designed for use with 1967-69 Camaro brake systems (compatible with OEM manual steering, and with the Borgenson power steering conversion box). * HQ Series Shockwaves: utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling (they also allow fine-tuning of the ride quality and handling; the rebound knob is located at the top of the shock for underhood access). * Front MUSCLEBar: helps reduce body roll and includes the PosiLink end links that provide immediate engagement between the chassis and control arms * Bolt-on 4-link: installation does not require any major modifications to the floor pan, and requires only minimal welding to the axle tube; also works with minitubs. The R-joint rod ends combine the best qualities of low-friction movement, lateral stability, full-range articulation, and quiet operation into one special bearing that is as home on the street as it is on the racetrack.

Not Yet Reviewed

$7,810.00

Ridetech 1967-69 Camaro/Firebird TQ Coil-Over Systems

Ridetech 1967-69 Camaro / Firebird (GM F-Body) TQ coilover systems include everything you need to upgrade your existing suspension and give your muscle car an aggressive lowered stance with modern drivability. Each package contains front and rear HQ coilovers, front upper and lower Strongarms, tall spindles, bolt-on 4-link with double adjustable bars and front sway bar. Buying a complete suspension system removes all the guesswork. Ridetech has spent hours collecting data to find the perfect spring rate and components for your vehicle's performance and ride quality. Tubular upper and lower Strongarms feature injection-molded Delrin© bushings with 13 percent PTFE reduce deflection and stiction. Ball joint angles are corrected for the tall spindles and the positions altered to allow more caster while keeping the wheel centered in the wheel opening. The additional caster settings improve high-speed stability and steering feel. The lower arms feature a double sheer lower mount that's been lowered for increased suspension travel. Additional details: * Tall "pin" spindles will induce more negative camber gain to maximize tire contact patch during cornering. It also offers a 2 in. drop—which allows for the use of longer shocks, creating more suspension travel. Compatible with all brake kits designed to fit the stock disc brake spindle. * Optional "hub" spindles offer the same geometry improvements as the pin spindle but add the performance and simplicity of late model Corvette hubs and brakes. Uses C5/C6/C7 Corvette hubs for maximum strength, consistent braking and reduced maintenance. (Hubs not included.) Compatible with C5/C6 Corvette brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. * Upper Strongarms feature corrected ball joint angles for the tall spindles. The upper ball joints have been moved back to allow additional caster settings to improve high-speed stability and steering feel. Offset slugs are also available for additional caster. Injection-molded Delrin© bushings with 13 percent PTFE reduce deflection and stiction. * Lower Strongarms feature a double sheer lower mount for increased strength. We have also dropped the lower shock mount to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Injection-molded Delrin© bushings with 13 percent PTFE are used to reduce deflection and stiction. * TQ "Track Quality" Series coilovers offer competition-grade handling with dual compression adjustment and rebound adjustment for precise tuning. Remote reservoirs provide consistent fluid temps in all environments, as well as easier access to compression tuning knobs.

Not Yet Reviewed

$8,115.00

Ridetech 1968-74 Nova Air Suspension Systems

Ridetech 1968-74 Nova air suspension systems provide the components to achieve an ultra-low stance, while improving the suspension geometry for added drivability. All you need to add to these kits is one of Ridetech's compressor systems. Ridetech 1968-74 Nova air suspension kits include: * Rideaech tall spindles induce more negative camber gain to maximize tire contact patch during cornering * Upper and lower front Strongarms * HQ Series Shockaves utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling * Front MUSCLEBar helps reduce body roll, crates room for wider tires, and includes PosiLink endlinks * Bolt-on 4-link greatly improves traction, handling, and ride quality

Not Yet Reviewed

$6,065.00

Ridetech 1967-69 Camaro/Firebird TQ Air Suspension Systems

Ridetech 1967-69 Camaro/Firebird (GM F-Body) TQ air suspension systems provide ultra-low show stance with modern ride quality and handling. These packages include front and rear HQ Shockwaves, upper and lower Strongarms, tall spindles, bolt-on 4-link with double adjustable bars and front sway bar. Buying a complete suspension system removes all the guesswork! Ridetech has spent hours collecting data to find the perfect spring rate and components for your vehicle's performance and ride quality. Tubular upper and lower Strongarms feature injection-molded Delrin© bushings with 13 percent PTFE reduce deflection and stiction. Ball joint angles are corrected for the tall spindles and the positions altered to allow more caster while keeping the wheel centered in the wheel opening. The additional caster settings improve high-speed stability and steering feel. Offset slugs are also available for additional caster. The lower arms feature a double sheer lower mount that has been lowered for increased suspension travel. Additional details: * Tall "pin" spindles will induce more negative camber gain to maximize tire contact patch during cornering. They also offer a 2 in. drop—which allows for the use of longer shocks, creating more suspension travel. Compatible with all brake kits designed to fit the stock disc brake spindle. * Optional "hub" spindles offer the same geometry improvements as the pin spindle but add the performance and simplicity of late model Corvette hubs and brakes. Uses C5/C6/C7 Corvette hubs for maximum strength, consistent braking and reduced maintenance. (Hubs not included.) Compatible with C5/C6 Corvette brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. * Upper Strongarms feature corrected ball joint angles for the tall spindles. The upper ball joints have been moved back to allow additional caster settings to improve high-speed stability and steering feel. Offset slugs are also available for additional caster. Injection-molded Delrin© bushings with 13 percent PTFE reduce deflection and stiction. * Lower Strongarms feature a double sheer lower mount for increased strength. We have also dropped the lower shock mount to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Injection-molded Delrin© bushings with 13 percent PTFE are used to reduce deflection and stiction. * TQ Series Shockwaves feature triple adjustable shock valving and are housed in an impact forged aluminum construction

Not Yet Reviewed

$8,485.00

Ridetech 1967-70 Mustang Air Suspension Systems

Ridetech 1967-70 Mustang air suspension systems provide modern ride quality and handling, while providing that ultra-low show stance. These kits take the guesswork out of putting together the perfect spring rates and components for the best performance. All you need to add is one of Ridetech's compressor systems. Kit includes: * Upper and Lower front Strongarms * Front and rear MUSCLEBar helps reduce body roll and includes the PosiLink endlinks * HQ Series Shockaves utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling * Front MUSCLEBar helps reduce body roll and includes PosiLink endlinks * Bolt-on 4-link greatly improves traction, handling, and ride quality.

Not Yet Reviewed

$6,370.00

Ridetech 1967-70 Cougar Air Suspension Systems

Ridetech 1967-70 Cougar air suspension systems provide modern ride quality and handling, while providing that ultra-low show stance. These complete kits take the guesswork out of putting together the perfect spring rates and components for the best performance. Kit includes: * Upper and Lower Strongarms control arms * Tall spindles * Steering arms * Inner and outer tie rods * Front MUSCLEBar helps reduce body roll and includes the PosiLink endlinks * Bolt-in 4-link system greatly improves traction, handling and ride quality * HQ Series Shockwaves utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling

Not Yet Reviewed

$6,270.00

QA1 Level 2 Full Vehicle Handling Suspension Kits

QA1's handling suspension kits provide a full-vehicle upgrade that fits your needs. Available in three different levels of performance, you can build your car in stages, using QA1's parts list as a road map to get to the level of performance you want and have peace of mind knowing you won't have compatibility issues. Greater control and improved cornering are key benefits of QA1 Level 2 handling suspension kits. They're designed to boost performance and include a more extensive assembly of components than Level 1 kits. They offer easy bolt-on installation and full compatibility with the OEM parts you attach them to. All QA1 handling suspension kits are available with or without shocks and struts—giving you the flexibility to obtain the shocks or struts and spring rates you desire. Select the kit designed for your vehicle.

5.0 out of 5 stars ( 11 )

$5,216.95

—

$9,020.95

QA1 Level 2 Big Wheel Kits

Build your project exactly how you want with QA1 Level 2 Big Wheel kits! Get the perfect look by easily adjusting your ride height with front and rear coilovers. Raise or lower your car 2 in. the front. Raise it up to 2 in. or lower it by up to 3 in. in the rear. QA1 Level 2 Big Wheel kits allow you to dial-in the exact style you want in minutes with the included spanner wrench. These complete bolt-on suspension kits are designed to fit up to 28 in. wheels on your vehicle and include everything needed to get your Box sitting right, while giving you a better ride and improved handling. Product features and benefits: * Double-adjustable coilovers give you the ability to individually tune your shock compression and rebound to get the perfect ride and get more grip off the line for drag racing * Adjustable upper and lower trailing arms allow your wheel and tire package to fit with adjustable trailing arms that center your rear axle in the wheel well to gain more clearance for up to 28 in. wheels * Tubular control arms are much lighter and stronger than stock and will upgrade front-end geometry for better drivability—and are designed specifically for big wheel cars with corrected suspension angles for large wheels and tires * Tubular sway bars help reduce body roll and improve stability with front and rear sway bars to reduce handling issues that come from big wheels and raised ride heights * Easy, bolt-in installation * Parts come powdercoated and ready-to-install with all necessary hardware to allow you to bolt up the kit right in your garage or work with your local shop * Works with original factory rear axle housings or Quick Performance 9 in. rear axle housings

5.0 out of 5 stars ( 2 )

$5,439.95

—

$5,715.95

QA1 1988-98 C1500 Front and Rear Coilover Conversion Systems

QA1 1988-98 C1500 front and rear coilover conversion systems are a great upgrade to your C1500 suspension. Each kit comes with QA1's proven adjustable coilover shocks—so you can change the valving to meet your specific needs—along with a variety of spring rate options. These shocks allow for ride height adjustability and are 100 percent dyno-tested and serialized. The QA1 C1500 front control arms and rear torque arms are manufactured from 12-gauge HSLA steel tubing for increased strength and are powdercoated for long lasting durability. Topped off with performance ball joints and low-friction, maintenance-free bushings. Complete with adjustable instant center, panhard bar, and pinion angle to allow you to adjust the system to your exact needs. This kit will add more stability and allows for optimum camber adjustment in a lowered truck. Easily bolt in this system--no welding or bed removal required. Everything needed is included, all the way down to the hardware.

Not Yet Reviewed

$5,597.95

—

$6,879.95

Ridetech 1968-72 GM A-Body Complete Coilover Systems

Ridetech 1968-72 GM A-body complete coilover systems include everything necessary to create modern drivability for your vintage GM muscle car. All the parts are designed to maximize tire contact, while providing high-speed stability and steering feel. The included rear Strongarms utilize Ridetech's innovative R-Joint technology—combining the best qualities of low-friction movement, lateral stability, full-range articulation, and quiet operation in one bearing. Take the guesswork out of purchasing a new suspension for your classic with a Ridetech complete coilover system. Kit items, features, and specs: * Front upper and lower control arms * Tall spindles induce more negative camber gain, allowing tires to lean into the turn—and allowing for longer shocks and more suspension travel * Upper and lower front Strongarms include Delrin bushings to reduce deflection and stiction * Four HQ Series coilovers allow fine tuning via rebound knob at the top of the shock; they come standard with a 1,000,0001-mile warranty * Brackets included with rear coilovers for easy attachment to frame and rear-end * Front MUSCLEBar helps reduce body roll, creates room for wider front tires, and includes PosiLink end links for immediate engagement between chassis and control arms * Adjustable-rate rear MUSCLEBar

Not Yet Reviewed

$5,645.00

Ridetech 1967-70 Mustang Coilover Suspension Systems

Ridetech 1967-70 Mustang coilover suspension systems allows you to give your vintage Pony modern drivability. The benefits of buying these complete kits is that Ridetech has done all the homework for you. They have matched the perfect spring rate and components for your Mustang's best performance and ride quality. All you do is install. Completely upgrade your existing suspension with Ridetech coilover suspension systems. Features include: * Upper Strongarms feature corrected ball joint angles for the tall spindles. The upper ball joint has been moved back to allow for additional caster setting to improve high-speed stability and steering feel. Billet cross shafts are included that feature a lowered mounting point to increase camber gain and correct suspension geometry. They house a stout double sheer lower shock mount. * Lower Strongarms feature a unique design that combines the control and strut rod into a stronger, more appealing one-piece design. Additional caster is designed into the arms and includes a robust bearing in an aluminum housing at the front mount to replace the soft factory rubber units. * HQ Series coilovers utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling. The rebound knob is located at the top of the shock for underhood access. * Front MUSCLEBar helps reduce body roll and includes the PosiLink end links that provide immediate engagement between the chassis and control arms. * Bolt-on 4-link greatly improves traction, handling, and ride quality

Not Yet Reviewed

$6,230.00

Ridetech 1982-2003 S-10 Complete Coilover Systems

Ridetech's 1982-2003 S-10 complete coilover systems eliminate your truck's factory leaf springs, replacing them with a heavy-duty wishbone link-style system that includes their excellent R-Joints for smooth, bind-free articulation. Your pickup truck will greatly benefit from the lowered ride height and improved ride quality offered—not to mention, the new stance will give your truck a whole new attitude. Ridetech 1982-2003 S-10 coilover systems include: * Upper Strongarms feature tall ball joints to provide increased camber gain * Lower Strongarms feature double sheer lower mount for increased strength * Tru-Turn steering linkage optimizes bump steer * HQ Series coilovers with impact forged aluminum bodies * Front MUSCLEBar helps reduce body roll and includes PosiLink end links * Rear wishbone system greatly improves traction, handling, and ride quality

Not Yet Reviewed

$5,720.00

QA1 Mopar Front Street Performance Coilover Conversion Systems

QA1 Mopar front street performance coilover conversion systems transform your classic Charger, Road Runner, or other classic B/E-body Mopar into a restomod that drives, corners, and launches like a modern machine. These Mopar systems feature great-looking powdercoated components that improve performance and save weight while making it easy to swap engines, including the Gen 3 Hemi. QA1 Mopar street performance systems are available with single or double adjustable shocks in kits offering 0 to 2 in. or 2 to 4 in. of drop. Features and benefits: * Coilovers help you achieve the perfect stance and ride quality * Single-adjustable shocks are recommended for cars used primarily on the street * Double-adjustable coilovers are recommended for consistent drag racing, autocross or road racing * Rack-and-pinion steering provides a modern feel and improved handling in any setting * Drastically improve geometry, enhancing driving feel and cornering capabilities * Designed for everyday driving, drag racing, and handling * Tubular design improves exhaust clearance while reducing weight * Works with multiple engine configurations

4.33 out of 5 stars ( 3 )

$5,363.95

—

$6,890.95

Heidts Superide II Independent Front Suspension Kits

Enjoy driving your fat-fendered cruiser with the smooth ride and handling of independent suspension. Heidts Superide II independent front suspension kits utilize a Mustang II spindle to allow for a front mount rack and pinion unit, making engine installation much easier. The upper control arms use threaded adjusters for the wheel alignment. Unlike eccentric adjusters, they will never slip or lose alignment when hitting bumps in the road. Dozens of packages are available for applications from 1935 and up. Components include: * Heidts 3-piece crossmember * Mustang II stock spindles * Tubular upper and lower control arms * Front disc brake kit with 11 in. diameter brake rotors and 4-piston brake calipers * Manual rack and pinion steering, front mounted * Billet single adjustable coilover shocks with silver powdercoated springs

4.0 out of 5 stars ( 1 )

$5,213.00

—

$5,854.00

Ridetech 1964-66 Mustang Complete Coilover Suspension Systems

The Ridetech complete coilover suspension system for the 1964-66 Ford Mustang includes everything you need to give your vintage muscle car modern drivability. The package contains front upper and lower control arms, tall spindles, steering arms, inner and outer tie rods, front MUSCLEBar, a bolt-In 4=link system, and four HQ Series coilovers for every corner of your vehicle. The benefit of buying a complete suspension system is that it removes all the guesswork when purchasing a new suspension. Ridetech has spent hours collecting data to find a perfect spring rate and components for your vehicle's performance and ride quality—designed to lower your vehicle. * Upper Strongarms feature corrected ball joint angles for the tall spindles. The upper ball joint have been moved back to allow for additional caster setting to improve high-speed stability and steering feel. Billet cross-shafts are included that feature a lowered mounting point to increase camber gain and correct suspension geometry. They house a stout double sheer lower shock mount. * Lower Strongarms feature a unique design that combines the control arm and strut rod into a stronger, more appealing one-piece design. Additional caster is designed into the arms and includes a robust bearing in an aluminum housing at the front mount to replace the soft factory rubber units. * Tru-Turn System includes tall spindles which induce more negative camber gain to maximize tire contact patch during cornering. It also includes steering arms, center link adapter, tie rods and adjusters to virtually eliminate bump steer, correct Ackerman angle, and allow for wider tires. Includes heavy-duty frame rail brace. This spindle is designed for use with 1967-69 Camaro brake systems. Compatible with OEM manual steering AND with the Borgeson power steering conversion box. * Optional "Hub" spindles offer the same geometry improvements as the pin spindles, but add the performance and simplicity of late model Mustang hubs and brakes. Includes S550 2015-23 Mustang hubs for maximum strength, consistent braking and reduced maintenance. Compatible with 2015-23 Mustang brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. Hubs fit Ford car 5 x 4.5 in. lug pattern and include 14mm studs. * HQ Series coilovers utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling; the rebound knob is located at the top of the shock for underhood access. The shocks come standard with a 1,000,0001 Mile Warranty. Interested in Autocross or Road Course racing? Consider the TQ Series coilovers. * Front MUSCLEBar sway bar helps reduce body roll and includes the PosiLink end links that provide immediate engagement between the chassis and control arms. Includes billet aluminum frame straps (anodized black) and low-friction bushings. * Bolt-on 4-link dramatically improves traction, handling, and ride quality. Installation does not require significant modifications to the floor pan and requires only minimal welding to the axle tube. Works with mini-tubs. All links are double adjustable with R-Joint rod ends, which combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is at home on the street as it is on the race track! * Weld-on lower axle brackets are available if using an aftermarket axle housing without stock-style leaf spring pads. (Part number 70010122, sold separately.)

Not Yet Reviewed

$7,670.00

QA1 Mopar Front Drag Coilover Conversion Systems

QA1 Mopar front drag coilover conversion systems transform your classic Charger, Road Runner, or other classic B/E-body Mopar into a restomod that drives, corners, and launches like a modern machine. These Mopar systems feature great-looking powdercoated components that improve performance and save weight while making it easy to swap engines, including the Gen 3 Hemi. Features and benefits: * Coilovers help you achieve the perfect stance and ride quality * Rack-and-pinion steering provides a modern feel and improved handling in any setting * Drastically improve geometry, enhancing driving feel and cornering capabilities * Designed for everyday driving, drag racing, and handling * Tubular design improves exhaust clearance while reducing weight * Works with multiple engine configurations * Add the optional sway bar (not included) to further enhance performance and cornering capabilities.

Not Yet Reviewed

$5,581.95

—

$6,760.95

QA1 Level 3 Full Vehicle Handling Suspension Kits

QA1's handling suspension kits provide a full-vehicle upgrade that fits your needs. Available in three different levels of performance, you can build your car in stages, using QA1's parts list as a road map to get to the level of performance you want and have peace of mind knowing you won't have compatibility issues. Top performance is the desired goal of many automotive upgrades—precisely what QA1 Level 3 handling suspension kits deliver. Compared with the Level 1 and 2 packages, these heavy-duty assemblies offer additional control components, as well as stiffer springs to maximize your cornering ability and handling. QA1 Level 3 kits are available with or without shocks and struts—giving you the flexibility to obtain the shocks or struts and spring rates you want. Select the kit designed for your vehicle.

Not Yet Reviewed

$6,660.95

—

$11,243.95

QA1 Level 2 Full Vehicle Drag Racing Suspension Kits

Looking for a better launch, straight-line stability, and consistent performance? Turn to QA1's drag racing suspension kits for a full-vehicle upgrade that fits your needs. Available in three different levels of performance, these drag racing kits offer easy, bolt-in installation (some welding may be needed) and seamlessly works with whatever OE component each piece attaches to. And with different levels, you can build your car in stages, using QA1's parts list as a road map to get to the level of performance you want and have peace of mind knowing you won't have compatibility issues. QA1 Level 2 drag racing kits are ideal for owners looking for serious performance gains at the track. They deliver everything needed in one shot, taking the guesswork out of the process, so you can skip the research and focus on preparing for your next race. Select the kit designed for your drag race car.

Not Yet Reviewed

$5,017.95

—

$8,620.95

Heidts 1964-70 Ford Mustang PRO-G Independent Front Suspension Kits

Heidts Pro-G independent front suspension kits are designed to provide unbelievable cornering and overall handling. They feature a direct bolt-on Pro-G subframe; simply unbolt and remove your front sheetmetal, engine, transmission, old subframe, then install the complete unit. These kits are available for a wide range of vehicles from the 1960s, '70s, and '80s. Includes: * Pro-G subframe * Pro-G 2 in. dropped spindles * Tubular upper and lower control arms * Power rack and pinion steering * Disc brake kit with 11 in. diameter rotors and 4-piston calipers * Billet coilover, single adjustable shocks with silver powdercoated springs * Transmission crossmember

Not Yet Reviewed

$7,725.00

—

$8,230.00

106 Results Found For "spring"