Free Shipping on Orders Over $125 at Summit Racing

Baileigh Industrial SN-F04-MS Sheet Metal Corner Notchers

Baileigh Industrial SN-F04-MS sheet metal corner notchers are great for creating perfect corners in metal projects that are impossible with hand tools. The machines have 6mm or 4-gauge mild steel capacity to make quick work of most any job. The notchers have blades that are fixed at 90 degrees, ensuring a perfect notch every time. A 25.5 in. x 25.5 in. oversized working table includes table guides for even more accuracy. These corner notchers feature 8.5 in. long blades that can be flipped and re-sharpened many times for even more life and cost savings. The blades are also negatively raked to pull the material to the stops during the cut—for the most accuracy available. SN-F04-MS machines come with a powerful 220 V, 3-phase motor for years of notching and an operator-controlled foot pedal capable of 15 strokes per minute.

Not Yet Reviewed

$12,618.99

Baileigh Industrial MH-19 Power Hammers

If you're into metal forming and shaping, a Baileigh Industrial MH-19 power hammer will be an asset in your shop. It runs on 220 V single-phase power and can transform from a rigid style to a spring slapping style, or even a very heavy-duty English wheel. When operating in the rigid mode, there is no give between the die heads. This machine is used for short stroke shaping and flanging. Tooling designs and profiles are endless, but some of the options are: mechanical shrinking, stretching dies, flanging dies, and louvers. The spring mode with "throw the die" causes a dead blow hammering effect. When in this mode, the total amount of pressure applied when the dies hit the metal is increased exponentially. This mode would be used for aggressive shrinking and planishing; many different tooling profiles can be used. The Baileigh power hammer uses an inverter to obtain various speeds for operation. Speeds range from 0 to 1,500 beats per minute, and speed is adjusted one of two ways: either with the operator-controlled foot pedal, or on the operator panel where he/she can lock in their speed. Another key feature of this equipment is the on-fly stroke adjustments, ranging from 0175 in. to .550 in. Also included: quick-release adjustment handles, a quick-change tooling system, tooling racks, one set of thumbnail shrink dies, one flat top, and one lower planishing die.

Not Yet Reviewed

$28,828.99

Baileigh Industrial MSS-14F Shrinker Stretchers

Quickly and comfortably shape steel or aluminum with the Baileigh Industrial MSS-14F shrinker stretcher. This machine is a foot-operated manual stretcher that's perfect for working with heavier gauge materials. The steel frame is rigid and ready for years of use in the shop. Baileigh MSS-14F Shrinker Stretcher specifications: * Maximum capacity:16 gauge mild steel, 12 gauge aluminum * 7 in. throat allows you to get deep into the panel * Comes standard with a set of 4 magnetic jaws * Quick change between functions by rotating jaws * Adjustment wheel to set jaw gap

Not Yet Reviewed

$5,088.99

Baileigh Industrial SH-12010 Hydraulic Sheet Metal Shears

If you need to shear extremely long sheets of 10-gauge mild steel, the Baileigh Industrial SH-12010 hydraulic sheet metal shears are built with a steel plate frame for accuracy and dependability to increase production. Baileigh Industrial SH-12010 hydraulic sheet metal shears features: * 120 in. length * 10-gauge mild steel maximum capacity * Minimum capacity of 24-gauge mild steel * 7.5 hp motor runs on 220 V 3-phase power * Powerful industrial-grade hydraulics produce smooth movements that prolong blade life * Up to 20 strokes per minute * Adjustable 24 in. back gauge ensures repeatability * Front support arms and table guides keep the material square to the blade * 3 modes on the operator console: Inch mode to Jog the control and ease the blade down to the material; Single mode to make one cut cycle per foot pedal push; and Auto mode for continuous cycling as you hold the pedal down * Comes standard with high carbon chromium blades * Blades have 4 shearing edges, so you can turn them when an edge gets dull to extend blade life and save money * Hydraulic hold-downs clamp the sheet solidly to the table, eliminating material lifting and improving blade life * Fully welded steel construction helps prevent flex and maintain accuracy for many years * Covered by a 1-year parts warranty * Baileigh stocks replacement blades and parts so they can ship them out quickly * Includes lifetime technical support by phone from a team of reps with hands-on metalworking experience

Not Yet Reviewed

$35,594.00

Baileigh Industrial SH-5210 Sheet Metal Shears

Baileigh Industrial SH-5210 sheet metal shears are one of the machines that started and built Baileigh's quality reputation. With their rigid, fully welded steel frames, the SH-5210 sheet metal shears will make perfect, accurate cuts every time for years to come. Features include: * 52 in. length * 10-gauge mild steel maximum capacity * Minimum capacity of 24-gauge mild steel * 5 hp motor runs on 220 V single-phase power * Up to 28 strokes per minute * Adjustable 24 in. back gauge ensures precise repeatability * Front support arms and table guides keep the material square to the blade * Three modes on the operator console: -- Inch mode: Jog the control and ease the blade down to the material -- Single mode: Makes one-cut cycle per foot-pedal push -- Auto mode: Continue cycling as you hold the pedal down * High-carbon chromium blades with four shearing edges, so you can turn them when an edge gets dull to extend blade life and save money * Hydraulic hold-downs clamp the sheet solidly to the table, eliminating material lifting and improving blade life

Not Yet Reviewed

$20,129.00

Baileigh Industrial HB-12014 Straight Sheet Metal Brakes

With a welded steel frame, Baileigh Industrial HB-12014 straight sheet metal brakes are strong enough to bend 14 gauge mild steel across its full length of 10 ft. (120 in.). This equipment will last for years in any shop. Product details: * This industrial sheet metal bender has a maximum bend angle of 135 degrees * 10 ft. sheet metal brake is made using only the highest-quality materials * Machined bending leaf pivots ride in precision bushings, allowing for better bend tolerances and minimizing operator fatigue * 2 massive counterweights on the bending apron reduce the effort of bending at maximum capacity * One-piece bending blade, machined to perfection, achieves tight bend radiuses * Top beam depth adjusts to fit different material thickness * Comes standard with stop rod to ensure repeatability for production runs * Thick, fully-welded steel plate frame maintains accuracy and keeps the machine from buckling at full capacity

Not Yet Reviewed

$12,649.00

Baileigh Industrial SH-5210-HD Hydraulic Sheet Metal Shears

With a welded steel frame, the Baileigh Industrial SH-5210-HD hydraulic sheet metal shears offer a long lifespan for cutting thick materials for high production, and adjustable blade gap and rake angle ensure quality cuts. Baileigh Industrial SH-5210-HD hydraulic sheet metal shears feature: * 52 in. length * 10-gauge mild steel maximum capacity * Minimum capacity of 24-gauge mild steel * 7.5 hp motor runs on 220 V 3-phase power * Industrial-grade hydraulic system located in the front for easy fluid changes * 35 to 47 strokes per minute for speedy production * Shearing carriage rides on hardened ways and uses heavy-duty bearings to reduce friction * Manually adjustable 23.62 in. back gauge ensures precise repeatability * Heavy duty table with roller bars slides material into the machine more easily * Side gauges keep the cut at 90 degrees (if you so choose) without you needing to make a guiding line on the material * Switch between three modes as needed: Jog mode to inch the blade down to the material, single cycle mode for one cut for one pedal push, and automatic cycling mode for continuous cutting for production runs * Adjustable rake angle dial makes it easy to fit your material thickness to minimize burr and put less strain on hydraulics * Convenient blade gap adjustment lets you eliminate folding and twisting * Comes standard with high carbon chromium blades * 2-sided upper blades and 4-sided lower blades can be flipped and resharpened as needed, saving money * Hydraulic hold-downs clamp the sheet solidly to the table, eliminating material lifting and improving blade life * Rigid, fully welded steel plate construction helps prevent flex and gives you many years of accuracy * Shadow line creates a reference line on the material so you know exactly where the cut will be * The SH-5210-HD plate shear is covered by a 1-year parts manufacturer warranty * Baileigh stocks replacement parts, including blades, in-house for fast shipping * Includes lifetime technical support by phone from a team of reps with hands-on metalworking experience

Not Yet Reviewed

$31,470.99

Baileigh Industrial BR-16E-36 Power Bead Rollers

Made of rigid steel, the Baileigh Industrial BR-16E power bead rollers combine all the best features in one package—including a quick-release top die, adjustable shaft, variable-speed pedal, depth stops, and more! Features of BR-16E-36 power bead rollers: * 16-gauge mild steel maximum capacity * 36 in. throat depth enables you to work on the middle of large panels * Industrial .5 hp motor runs on 110 V power and plugs into any household outlet * Both rolls are driven (chain drive on the top roll prevents slippage) * Variable-speed foot pedal lets you slow down your feed rate for more delicate work * You can change the rpm of the rolls in real time by turning the dial on the side or lock the rolls at a constant speed * Rollers can run forward or in reverse, so you can go over a pattern as needed * Left- and right-hand controls are the same on both sides of the machine * Adjust the forming depth by turning a hand wheel just above the working area * Quick-release top die can open and close without altering the depth pressure * You can begin or end a design in the middle of the panel and not worry if the depth is set correctly * Depth stop allows you to easily make straight, repeatable beads * Comes standard with a 1/4 in. round bead tooling set and a .05 in. step roll set * Shaft is compatible with standard tooling to allow user to reuse rolls from another brand * Bottom die can slide in or out, so you can create custom profiles by varying the offset * All friction points turn on bronze bushings that last for decades and grease fittings allow for convenient maintenance * Heavy steel frame ensures accurate beads over many years of use and helps prevent flex * Covered by Baileigh Industrial's 1-year parts warranty and includes lifetime technical support by phone from a team of expert metalworkers

Not Yet Reviewed

$7,018.99

BluePrint Engines Pro Series Chevy 427 C.I.D. 540 HP Dressed Long Block Crate Engines

Does your car need more power? Of course it does! Install 540 hp and be the envy of the block. BluePrint Engines Pro Series 427 c.i.d. dressed long block crate engines have the muscle you need to impress. These powerhouses feature a 30-month/50,000-mile warranty and they are the perfect choice for drivable and reliable high-end performance. Additionally, these assemblies are manufactured under strict tolerances and provide outstanding, consistent results. All of the rotating assemblies are balanced within 2 grams on a computerized balancer. BluePrint Pro Series crate engines are also dyno-tested and include the dyno sheets. For high-horsepower, big displacement engines, BluePrint Pro Series Chevy 427 c.i.d. dressed crate engines are the way to go! Features include: * BluePrint Engines cast iron block * 4340 forged crankshaft * 4340 forged connecting rods * Forged pistons * 9.5:1 compression * 4.125 in. x 4.000 in. bore/stroke * Hydraulic roller camshaft * Double roller timing chain * 64cc chamber aluminum cylinder heads * 1.6 ratio rocker arms * Carburetor * Billet distributor

5.0 out of 5 stars ( 5 )

$11,199.00

BluePrint Motorsports Pro Series Chevy 632 C.I.D. 815 HP Dressed Long Block Crate Engines

BluePrint Pro Series Chevy 632 c.i.d. dressed long block crate engines have it all! You'd better take a firm grip, because these beauties run with 815 hp! The engines are a perfect choice for drivable and reliable high-end performance. Additionally, the Pro Series crate engines are manufactured under strict tolerances to provide outstanding, consistent results. All of the rotating assemblies are balanced within 2 grams on a computerized balancer. The engines are also dyno-tested and include the dyno sheets. For high-horsepower, big displacement engines, BluePrint Pro Series Chevy 632 c.i.d. dressed crate engines are the way to go! Crate engine features include: * New BluePrint Gen 6 tall deck block * Internal balance * Has a provision for a mechanical fuel pump * One-piece rear main seal * 4-bolt mains * 4.600 in. bore * Forged 4.750 in. stroke crankshaft * Forged H-beam connecting rods * Forged pistons * 10:1 compression * Billet distributor * Hydraulic roller camshaft - Lift = 0.698 in. / 0.698 in. - Duration at 0.050 in. = 272 / 282 degrees - Lobe Separation = 110 degrees * Double roller timing chain * Billet distributor * Aluminum cylinder heads

4.55 out of 5 stars ( 11 )

$17,699.00

—

$20,199.00

BluePrint Engines Pro Series Chevy 540 C.I.D. 670 HP Dressed Long Block Crate Engines

Enter the realm of pavement-grinding power with the BluePrint Pro Series Chevy 540 c.i.d. dressed long block crate engines. These 670 hp powerhouses feature a 30-month/50,000-mile warranty and they are the perfect choice for drivability and reliable high-end performance. Additionally, these assemblies are manufactured under strict tolerances and provide outstanding, consistent results. All of the rotating assemblies are balanced within 2 grams on a computerized balancer. BluePrint Pro Series crate engines are also dyno-tested and include the dyno sheets. For high-horsepower, big displacement engines, BluePrint Pro Series Chevy 540 c.i.d. dressed crate engines are the way to go! Features include: * New BluePrint Block * 4 bolt mains * Forged crankshaft * Forged connecting rods * Hydraulic roller camshaft - Lift = 0.647 in. / 0.647 in. - Duration @ 0.050 in. = 248 / 254 degrees - Lobe Separation = 112 degrees * Double roller timing chain * Aluminum cylinder heads * Carburetor * Billet distributor

5.0 out of 5 stars ( 3 )

$14,499.00

BluePrint Engines Pro Series Chevy 572 C.I.D. 745 HP Dressed Long Block Crate Engines

BluePrint Pro Series Chevy 572 c.i.d. dressed long block crate engines are loaded with 745 hp for tire-ripping power! They feature a 30-month/50,000-mile warranty. These engines are the perfect choice for drivability and reliable high-end performance. Additionally, these assemblies are manufactured under strict tolerances and provide outstanding, consistent results. All of the rotating assemblies are balanced within 2 grams on a computerized balancer. BluePrint Pro Series engines are also dyno-tested and include the dyno sheets. For high-horsepower, big displacement engines, BluePrint Pro Series Chevy 572 c.i.d. dressed crate engines are the way to go! Features include: * New BluePrint tall deck * 1 piece rear main seal * 4.500 inch bore * Forged crankshaft * Forged connecting rods * Forged pistons * Hydraulic roller camshaft - Lift = 0.698 in. / 0.698 in. - Duration @ 0.050 in. = 272 / 282 degrees - Lobe Separation = 110 degrees * Double roller timing chain * Aluminum cylinder heads * Billet distributor * Carburetor

5.0 out of 5 stars ( 1 )

$15,799.00

BluePrint Motorsports Pro Series Mopar 426 C.I.D. 610 HP EFI Base Long Block Crate Engines

BluePrint Engines Pro Series Mopar 426 c.i.d. EFI base long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 610 hp and 525 lbs.-ft. of torque. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal --- ROTATING ASSEMBLY: Forged steel crankshaft 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III HEMI Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- PS426CTF ALSO INCLUDES: Fuel injection Throttle body Harmonic balancer Fabricated intake manifold Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Compression ratio: 10.48:1 Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel delivery type: Fuel injected -- Spark plug: NGK 97408/ LZTR6AP11EG -- Spark plug gap: .043 in. -- Harmonic balancer: Non-weighted -- Flexplate / Flywheel: Non-weighted -- Stall converter: 2500+ -- Intake manifold: Fabricated aluminum Gen III HEMI -- Fuel recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2

Not Yet Reviewed

$14,299.00

—

$17,499.00

BluePrint Engines Pro Series Chevy LS 427 C.I.D. 625 HP Carbureted Retrofit Long Block Crate Engines

BluePrint Engines Pro Series Chevy LS 427 c.i.d. carbureted retrofit dressed long block crate engines put down a whopping 625 hp and 550 lbs.-ft. of torque! They feature a 30-month/50,000-mile warranty and are the perfect choice for drivable and reliable high-end performance. Additionally, these engines are manufactured under strict tolerances and provide outstanding, consistent results. All of the rotating assemblies are balanced to within 2 grams on a computerized balancer. BluePrint Pro Series long block crate engines are also dyno-tested and include the dyno sheets. Long block crate engine features include: * New GM LS engine block * 4340 forged 4.125 in. stroke crankshaft * 4340 forged 6.125 in. long connecting rods * Forged pistons * 11.0:1 compression * Hydraulic roller camshaft, .624 in. lift intake, .624 in. lift exhaust, 239/255 intake/exhaust duration at .050 in. lift with 114 degree lobe separation * Aluminum GM LS cylinder heads * Single roller timing chain * Aluminum single plane intake manifold * Full roller rocker arms * Carburetor * Ignition coil packs * Spark plug wires * Spark plugs * Harmonic balancer

3.0 out of 5 stars ( 2 )

$14,049.00

BluePrint Engines Pro Series Mopar 426 C.I.D. 872 HP EFI Deluxe Dressed Long Block Crate Engines

BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 872 hp and 764 lbs.-ft. of torque. These engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crank 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Whipple 3.0L supercharger Supercharger fluid reservoir Hellcat throttle body Harmonic balancer Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Whipple 3.0L supercharger -- Spark Plug: NGK 5107 -- Spark Plug Gap: .025 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Supercharger -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2

Not Yet Reviewed

$27,799.00

BluePrint Engines Pro Series Chevy 540 C.I.D. 670 HP Long Block Crate Engines

Enter the realm of pavement-grinding power with the BluePrint Pro Series Chevy 540 c.i.d. long block crate engines. These 670 hp powerhouses feature a 30-month/50,000-mile warranty and they are the perfect choice for drivability and reliable high-end performance. Additionally, these assemblies are manufactured under strict tolerances and provide outstanding, consistent results. All of the rotating assemblies are balanced within 2 grams on a computerized balancer. BluePrint Pro Series crate engines are also dyno-tested and include the dyno sheets. For high-horsepower, big displacement engines, BluePrint Pro Series Chevy 540 c.i.d. dressed crate engines are the way to go! Features include: * New BluePrint Block * 4 bolt mains * Forged crankshaft * Forged connecting rods * Hydraulic roller camshaft - Lift = 0.647 in. / 0.647 in. - Duration @ 0.050 in. = 248 / 254 degrees - Lobe Separation = 112 degrees * Double roller timing chain * Aluminum cylinder heads

Not Yet Reviewed

$13,299.00

BluePrint Engines Pro Series Mopar 426 C.I.D. 610 HP EFI Deluxe Dressed Long Block Crate Engines

BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 610 hp and 525 lbs.-ft. of torque. The engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW OEM Hellcat engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crankshaft 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Holley Terminator engine harness Fuel injection Throttle body Harmonic balancer Fabricated intake Manifold Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Fuel Injected -- Spark Plug: NGK 97408/ LZTR6AP11EG -- Spark Plug Gap: .043 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Fabricated Aluminum Gen III HEMI -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2

Not Yet Reviewed

$19,399.00

—

$19,499.00

BluePrint Engines GM 400 C.I.D. 500 HP EFI Stroker Fully Dressed Long Block Crate Engines

BluePrint Engines GM 400 c.i.d. 500 hp EFI stroker fully dressed long block crate engines put down a whopping 500 hp and 473 lbs.-ft. of torque! They feature a 30-month/50,000-mile warranty and are the perfect choice for drivable and reliable high-end performance. Additionally, These assemblies are manufactured under strict tolerances and provide outstanding, consistent results. BluePrint Engines GM 400 c.i.d. 500 hp EFI stroker base fully dressed long blocks crate engines are also dyno-tested and include the dyno sheets. Features include: * BluePrint cast iron block * Cast steel 3.750 in. stroke crankshaft * 5.700 in. long connecting rods * Forged pistons * 10.3:1 compression * Hydraulic roller camshaft, .555 in. lift intake, .576 in. lift exhaust, 236/242 intake/exhaust duration at 0.050 in. lift with 110 degree lobe separation * BluePrint aluminum cylinder heads * Premium single true roller timing set * Dual plane intake manifold

5.0 out of 5 stars ( 1 )

$9,299.00

BluePrint Motorsports Pro Series Chevy 632 C.I.D. 815 HP Base Long Block Crate Engines

Get a firm grip, because BluePrint Pro Series Chevy 632 c.i.d. base long block crate engines run with 815 hp! These engines are the perfect choice for drivable and reliable high-end performance. Additionally, the BluePrint Pro Series Chevy 632 c.i.d. base crate engine assemblies are manufactured under strict tolerances and provide outstanding, consistent results. All of the rotating assemblies are balanced within 2 grams on a computerized balancer. BluePrint Pro Series engines are also dyno-tested and include the dyno sheets. For high-horsepower, big displacement engines, BluePrint Pro Series Chevy 632 c.i.d. base crate engines are the way to go! Crate engine features include: * New BluePrint Gen 6 tall deck block * Internal balance * Has mechanical fuel pump provision * 1 piece rear main seal * 4 bolt mains * 4.600 inch bore * Forged crankshaft * Forged connecting rods * Forged pistons * 10.0:1 Compression * Hydraulic roller camshaft - Lift = 0.647 in. / 0.647 in. - Duration @ 0.050 in. = 258 / 266 degrees - Lobe Separation = 112 degrees * Double roller timing chain * Aluminum cylinder heads

Not Yet Reviewed

$16,399.00

BluePrint Engines Pro Series Mopar 426 C.I.D. 872 HP Base Long Block Crate Engines

BluePrint Engines Pro Series Mopar 426 c.i.d. Base dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 872 hp and 764 lbs.-ft. of torque. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crank 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Whipple 3.0L supercharger Supercharger fluid reservoir Hellcat throttle body Harmonic balancer Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Holley Terminator ECU controller kit and wiring harness --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Whipple 3.0L supercharger -- Spark Plug: NGK 5107 -- Spark Plug Gap: .025 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Supercharger -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2

Not Yet Reviewed

$25,099.00

BluePrint Engines Pro Series Chevy 427 C.I.D. 540 HP Base Long Block Crate Engines

BluePrint Pro Series 427 c.i.d. base long block crate engines have the muscle that you need to impress. These powerhouses feature a 30-month/50,000-mile warranty and are the perfect choice for drivable and reliable high-end performance. Additionally, the BluePrint Pro Series Chevy 427 c.i.d. base crate engine assemblies are dyno-tested and include the dyno sheets. Pro Series 427 base long blocks feature: * 540 hp, 535 ft.-lb., compression ratio 10.0:1 * BluePrint cast iron block with 4-bolt main --4.125 in. bore --Mechanical fuel pump provision --Passenger side dipstick --Drilled and tapped for clutch linkage * Forged crankshaft and connecting rods * Forged pistons with rings * Internal front/internal rear balanced rotating assembly * BluePrint aluminum cylinder heads --64cc chamber --2.08 in. intake/1.60 in. exhaust valves --220cc intake/67cc exhaust runners * Hydraulic roller cam --.577 intake/.577 exhaust lift --240 intake/248 exhaust duration @ .050 --112 degree lobe separation * Ignition timing --- Initial timing 10 to16 degrees and total timing 32 to 34 degrees * Valve covers, oil pan, and timing cover * Harmonic balancer

Not Yet Reviewed

$9,999.00

Baileigh Industrial SBR-5216 Shear Brake Rollers

Baileigh Industrial SBR-5216 shear brake rollers have a massive 16-gauge mild steel capacity over their entire 52 in. width. They consist of a low-production press brake, slip roll, and sheet metal shear. This is the most powerful 3-in-1 combination machine on the market; the economical price makes it perfect for home shops, industrial art shops, and other facilities where small production runs don't justify dedicated individual machines. The shear portion of SBR-5216 brake rollers has a spring-loaded clamp that keeps the material from lifting up, which extends blade life and helps with cut quality. A blade gap adjustment, as well as a material guide, is also included. The manual press brake section has removable and movable top fingers—and the bottom V-block die that is fixed. Different fingers allow for many types of boxes and pans to be made. The rolls on the slip roll section are hardened for long life and have three wire grooves, in case wire forming is needed. The back and top rolls are also adjustable to help with forming different thicknesses.

4.0 out of 5 stars ( 1 )

$5,608.99

Baileigh Industrial Heavy-Duty BB-9612 Box and Pan Brakes

Baileigh Industrial heavy-duty BB-9612 box and pan brakes will bend a 4 ft. x 8 ft. sheet of 12-gauge mild steel the long way! Their steel framework ensures decades of crisp bends and reliable production, and the hardened fingers and bending rail will produce incredibly straight, tight corners, even when working with stainless steel. Baileigh heavy-duty BB-9612 box and pan brakes include a 22-finger assortment of varying sizes and two massive bending apron counterweights that help keep your fatigue low, even when working at full capacity. Other product features include: * 8 ft. (96 in.) bending width * Maximum capacity of 12-gauge mild steel and 16-gauge stainless steel * Bend angle of up to 135-degrees * (6) 3 in. fingers; (4) 4 in. fingers; (10) 5 in. fingers; (2) 6 in. fingers * Maximum box depth of 6 in. * Apron side shafts ride in bearings that can be oiled to improve tolerance and make the apron last longer * Heavy truss rods reinforce the rigidly-built apron and help it withstand deflection * Mounted on a stable floor stand and raised to the ideal height, it improves efficiency and reduces operator fatigue * Electro-welded steel construction withstands bending at maximum capacity, day-in and day-out, for decades of quality bends * Heavy framework weighs an impressive 3,200 lbs. * Recommended for: bending mild steel, aluminum, and stainless steel

Not Yet Reviewed

$14,299.00

Baileigh Industrial SH-6010 Hydraulic Compact Metal Shears

Baileigh Industrial built the Baileigh Industrial SH-6010 hydraulic compact metal shears with a fully welded metal plate frame to reduce flex and ensure accuracy. In addition, the industrial-grade hydraulics produce smooth movements to prolong blade life for longer-lasting service. Baileigh Industrial SH-6010 hydraulic compact metal shears feature: * 60 in. length sheet metal shear * 10-gauge mild steel maximum capacity * Minimum capacity of 24-gauge mild steel * 3 hp motor runs on 220 V 3-phase power * Up to 26 strokes per minute * Adjustable 24 in. back gauge ensures precise repeatability * Front support arms and table guides keep the material square to the blade * Three modes on the operator console: inch mode to jog the control and ease the blade down to the material, single mode to make one cut cycle per foot pedal push, and auto mode for continuous cycling, as you hold the pedal down * Comes standard with high carbon chromium blades * Blades have 4 shearing edges, so you can turn them when an edge gets dull to extend blade life and save money * Hydraulic hold-downs clamp the sheet solidly to the table, eliminating material lifting and improving blade life * Rigid steel frame minimizes deformation and helps deliver clean, high-quality cuts * Covered by a 1-year parts manufacturer warranty * Baileigh stocks replacement parts, including blades, in-house for fast shipping * Includes lifetime technical support by phone from a team of reps with hands-on metalworking experience

Not Yet Reviewed

$24,089.00

35 Results Found For "sheet"