Free Shipping on Orders Over $109 at Summit Racing

BluePrint Engines GM 383 C.I.D. 436 HP Base Stroker Long Block Crate Engines

BluePrint Engines GM 383 c.i.d. 436 hp base stroker long block crate engines will provide you a great foundation to return your vehicle to the performance level you desire. They feature a new one-piece rear main BluePrint engine block with 4-bolt mains and passenger side dipstick. Inside the block is a cast crankshaft and connecting rod rotating assembly, with 10.1:1 compression hypereutectic pistons hung on the end. The full roller camshaft provides .544 intake/555 exhaust lift with 230 intake/236 exhaust duration at .050 with a 110 degree lobe separation. The engines also include a new oil pan, a set of valve covers, and a timing cover to finish them off.

4.78 out of 5 stars ( 27 )

$6,199.00

—

$9,299.00

ATK High Performance Chevy 383 Stroker 470 HP Mid-Dress Long Block Crate Engines

Looking for an engine that puts out big power and sounds flat out NASTY!? You will find those features and more with ATK High Performance Chevy 383 Stroker 470 hp long block crate engines. Engine includes: * Intake manifold: Weiand Stealth dual plane * Harmonic balancer: PowerBond 8 in. internal balance * Distributor: MSD GM HEI distributor * Includes a GM long water pump Specifications: * Horsepower: 470 hp at 5,200 rpm * Torque: 490 lb.-ft. at 4,800 rpm * Block: Seasoned GM 4-bolt main with one-piece seal and passenger side dipstick * Crankshaft: Scat nodular iron * Connecting rods: Scat 4340 Forged I-beam with ARP 8740 bolts * Pistons: Forged * Piston rings: Moly rings * Compression ratio: 10:1 compression * Camshaft: Hydraulic roller * Camshaft specifications: 224/236 duration at .050 and .591in/.591ex lift with a 108 degree lobe separation * Cylinder heads: Dart SHP aluminum 72 cc chamber with 2.02 in. intake and 1.60 in. exhaust valves * Rocker arms: Billet 1.6 ratio aluminum roller rockers * Oil pan: Original-style 5-quart pan * Oil type: 10W30 * Recommended plug gap: 0.035 in. * Water pump: Designed to use a long water pump * Fuel type: Dyno testing was done using 91 octane fuel * A 2,500 rpm+ torque converter is recommended for best results * Engine will not produce enough vacuum for power brakes

Not Yet Reviewed

$5,898.99

BluePrint Engines GM 383 C.I.D. Stroker Short Block Plus Engines

BluePrint Engines GM 383 c.i.d. short block plus stroker engines are always balanced and ready for you to finish assemble. Whether you're building a kit car, race car, hot rod, or just a sweet old memory, BluePrint Engines are ready to add a lot of muscle to your fun! Block details: * 4-bolt main * Passenger side dipstick * Cylinder wall thickness "sonic-tested" * Cylinders computer-honed to tolerance of .0002 in. Rotating assembly details: * Crankshaft * Pistons * Connecting rods * Moly rings * High-volume oil pump * Heavy-duty single roller timing set * Harmonic balancer * Hydraulic roller camshaft and lifters * Oil pan * Brass freeze plugs

4.56 out of 5 stars ( 9 )

$5,999.00

BluePrint Engines GM 383 C.I.D. 410 HP Stoker Dressed Long Blocks with Aluminum Heads

BluePrint Engines GM 383 c.i.d. 410 hp stoker dressed long blocks with aluminum heads are great choices for those who demand a drivable, reliable high performance engine. All small block Chevy 383 rotating assemblies are balanced within 2 grams on a state-of-the-art computerized balancer. In addition, each engine is dyno-tested and is then shipped with a documentation of the engine's high performance power curve. Key features and parts may include: * Handpicked seasoned block * Square and parallel decked * Align-honed main bearing bore * Cylinders honed on computer controlled machine to within .0002 straightness and roundness * Cylinders are sonic tested for thickness * Passenger side dipstick * Drilled and tapped for clutch linkage * BluePrint cast steel crankshaft * OEM-type connecting rods with 150,000 psi bolts * Hypereutectic pistons * Aluminum cylinder heads * Hydraulic roller camshaft * Valve covers * Oil pan and timing cover * HEI distributor * Carburetor * Aluminum intake manifold * BluePrint Engines 30 month/50,000 mile warranty

4.8 out of 5 stars ( 5 )

$7,099.00

ATK High Performance Chevy 383 Stroker 460 HP Complete Long Block Crate Engines

Looking for an engine that puts out big power and sounds flat out NASTY!? You will find those features and more with ATK High Performance Chevy 383 Stroker 460 hp long block crate engines. Engine includes: * Carburetor: Quick Fuel 680 cfm vacuum secondary * Intake manifold: Weiand Stealth Dual Plane * Spark plugs: Autolite 3923 plugs * Harmonic balancer: PowerBond 8 in. internal balance * Fuel pump: Holley 110gph mechanical pump * Distributor: MSD GM HEI Distributor * Includes a GM long water pump Specifications: * Horsepower: 460 hp at 5,200 rpm * Torque: 490 lb.-ft. at 4,800 rpm * Block: Seasoned GM 4-bolt main with one-piece seal and passenger side dipstick * Crankshaft: Scat Nodular Iron * Connecting rods: Scat 4340 Forged I-beam with ARP 8740 bolts * Pistons: Forged * Piston rings: Moly rings * Compression ratio: 10:1 compression * Camshaft: Hydraulic roller * Camshaft specifications: 224/236 duration at .050 and .591in/.591ex lift with a 108 degree lobe separation * Cylinder heads: Dart SHP aluminum 72 cc chamber with 2.02 in. intake and 1.60 in. exhaust valves * Rocker arms: Billet 1.6 ratio aluminum roller rockers * Oil pan: Original-style 5-quart pan * Oil type: 10W30 * Recommended plug gap: 0.035 in. * Water pump: Designed to use a long water pump * Fuel type: Dyno testing was done using 91 octane fuel * A 2,500 rpm+ torque converter is recommended for best results * Engine will not produce enough vacuum for power brakes

4.67 out of 5 stars ( 3 )

$6,698.99

BluePrint Engines GM 396 C.I.D. 530 HP Stroker Base Long Block Crate Engines

BluePrint Engines presents their all-forged small block Chevy-compatible engine, built for hard-hitting racing performance. Available carbureted or fuel injected, they are designed to handle extreme conditions and come packed with race-proven components. Select the best engine for your build. BluePrint Motorsports GM small block-compatible 396 cu. in. engines base-dressed crate engines will include either a Holley 950cfm double pumper carburetor with mechanical secondaries or a Holley Sniper 2 EFI self-tuning kit in chrome, along with the following: * BluePrint Engines aluminum intake manifold * BluePrint Engines valve covers * Moroso Street/Strip oil pan * HEI distributor * High-volume oil pump * Timing cover * Balancer Specifications and features for both carbureted and fuel injected engines: * 530 hp/480 lb.-ft. of torque * Compression ratio: 10.4:1 * Requires Race Fuel of 100+ octane * BluePrint Engines high-strength cast iron block -- Cylinders honed on computer-controlled machine to within .0002 straightness and roundness -- Cylinders are sonic tested for thickness -- Drilled and tapped for clutch linkage -- Align honed main bearing bore -- Mechanical fuel pump provision -- Passenger side dipstick -- One-piece rear main seal -- 4-bolt main -- 4.000 in. bore * Rotating assembly -- BluePrint forged crankshaft -- 3.875 in. stroke -- Forged I-beam 6.000 in. connecting rods -- BluePrint Engines forged 4032 pistons -- Internally balance front--externally balanced rear * BluePrint aluminum cylinder heads -- 64cc chamber -- 2.08 in. intake/1.60 in. exhaust valves -- 220cc intake/67cc exhaust runners * Hydraulic roller camshaft -- .638 intake/.622 exhaust lift -- 251 intake/259 exhaust duration at .050 in. -- 114-degree LSA * Ignition timing: 34 degrees total Note: BluePrint Motorsports engines are built for maximum performance and are intended for extreme duty applications. Because of the high-stress nature of their use, these engines are sold without any warranty, expressed, or implied.

Not Yet Reviewed

$8,299.00

ATK High Performance Chevy 383 Stroker 470 HP Base Long Block Crate Engines

Looking for an engine that puts out big power and sounds flat out NASTY!? You will find those features with ATK High Performance Chevy 383 Stroker 470 hp base long block crate engines. Engine specifications include: * Horsepower: 470 hp at 5,200 rpm * Torque: 490 lb.-ft. at 4,800 rpm * Block: Seasoned GM 4-bolt main with one-piece seal and passenger side dipstick * Crankshaft: Scat nodular iron * Connecting rods: Scat 4340 forged I-beam with ARP 8740 bolts * Pistons: Forged * Piston rings: Moly rings * Compression ratio: 10:1 compression * Camshaft: Hydraulic roller * Camshaft Specifications: 224/236 duration at .050 and .591in/.591ex lift with a 108 degree lobe separation * Cylinder heads: Dart SHP aluminum 72cc chamber with 2.02 in. intake and 1.60 in. exhaust valves * Rocker arms: Billet 1.6 ratio aluminum roller rockers * Oil pan: Original-style 5-quart pan * Engine will not produce enough vacuum for power brakes

Not Yet Reviewed

$5,198.99

BluePrint Engines GM 383 C.I.D. 436 HP Dressed Stroker Long Block Crate Engines

Bolt some serious power into your ride with a BluePrint GM 383 c.i.d. 436 hp dressed Stroker long block crate engine. They're built from the ground up to provide a reliable 436 hp and 443 lbs.-ft. of torque to power your street rod, musclecar, or any other project that needs serious power. Each engine is hand-assembled and precision-balanced to ensure it will run smooth and strong for years to come. Three models are available; compare options and order the engine that best fits your needs. Product features and specifications: * 4-bolt main block * New cast crankshaft * Hypereutectic pistons * Chevy heavy beam rods with 150,000 psi bolts * Moly rings * Balanced rotating assembly * Melling high-volume oil pump * Hydraulic roller lifter camshaft * .544 intake / .555 exhaust * 230 intake / 236 exhaust duration at .050 * 110 degree lobe separation * Heavy-duty double roller timing set * Aluminum cylinder heads * Hardened retainers and springs * Swirl polished intake and exhaust valves * Hardened pushrods * Dual plane satin finish intake manifold * Carburetion * Distributor, plug wires and plugs * New valve covers * Dyno tested—and shipped with results

4.79 out of 5 stars ( 62 )

$7,299.00

—

$8,399.00

BluePrint Engines 350 C.I.D. Cruiser Fully Dressed Crate Engines

BluePrint Engines 350 c.i.d. Cruiser fully dressed crate engines make an great choice for daily drivers and cruising. These fully dressed engines make up to 18 in. of vacuum and work excellent with power brakes, stock torque converter and stock gearing and they will run on 87 octane fuel. Details and specs: * 341 hp/371 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating Assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front/external rear engine balance Cylinder Heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners Roller Cam specs: * .477 intake/.471 exhaust * 202 intake/212 exhaust duration @ .050 - 115-degree lobe separation Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Harmonic balancer * Spark plugs * Spark plug wires * Standard rotation long style water pump * Waterneck and thermostat * Fuel pump * Oil pan * Timing cover * Aluminum intake * HEI distributor * 600 cfm carburetor * Dyno test results shipped with engine

4.28 out of 5 stars ( 29 )

$6,199.00

—

$8,199.00

BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block Crate Engines

BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block crate engines are available with fuel injection—and base or deluxe carbureted models. SPECIFICATIONS FOR ALL MODELS INCLUDE: * HP and Torque: 390 hp / 410 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum Heads * Hydraulic Roller Cam * Cast Iron Crankshaft * Hypereutectic Pistons * BLOCK: NEW BluePrint Cast Iron Block Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Iron Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear engine balance * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 64cc chamber 2.02 in. intake/1.60 in. exhaust valves 195cc intake/75cc exhaust runners * CAM SPECS: Cam Type: Roller .495 Intake .502 Exhaust 220 Intake / 224 Exhaust duration @ .050 - 114 degree lobe separation * IGNITION TIMING: 32 Degrees Total at 3,500 rpm * ALSO INCLUDES: Valve covers Oil pan Timing cover Aluminum intake HEI distributor Dyno test results shipped with engine 30 month / 50,000 warranty INCLUDED ONLY WITH FUEL INJECTION MODEL BP3505CTF: * EFI system INCLUDED ONLY WITH BASE CARBURETED MODEL BP3505CTC: * 670 cfm carburetor INCLUDED ONLY WITH DELUXE CARBURETED MODEL BP3505CTCD: * Harmonic balancer * Spark plugs * Spark plug wires * Standard Rotation Long Style Water Pump * Waterneck and Thermostat * Fuel Pump * 670 cfm carburetor

4.8 out of 5 stars ( 10 )

$5,899.00

—

$6,999.00

BluePrint Engines GM 400 C.I.D. 500 HP Dressed Long Block Crate Engines

Dressed for high performance, BluePrint Engines GM 400 c.i.d. 500 hp long block crate engines are not your grandpa's 400! Built by skilled craftsmen, these blocks are assembled with ignition and carburetor, as well as valve covers, oil pan, and timing cover. The most complete crate engine available, they offer you fast, easy installation. And because they're dyno-tested, you can be sure all the components will work together perfectly! BluePrint's GM 400 c.i.d. 500 hp dressed engines feature: * Cast iron block with 4-bolt mains * Compression ratio: 10.3:1 * Forged crankshaft * 5.7 in. connecting rods * 150,000 psi rod bolts * Forged pistons * Hydraulic roller cam * BluePrint aluminum heads with 64cc chamber * Intake manifold dual plane, satin aluminum * Carburetor * Dyno test results shipped with engine * 30-month/50,000-mile warranty

4.25 out of 5 stars ( 12 )

$8,199.00

—

$10,699.00

BluePrint Engines GM 350 C.I.D. 390 HP Long Block Crate Engines

BluePrint Engines GM 350 C.I.D. 390 HP Long Block crate engines deliver 390 hp and 410 lbs.-ft. of torque. They feature aluminum heads, hydraulic roller cam, cast iron crankshaft, hypereutectic pistons, and a compression ratio of 9.2:1. Additional specifications include: * BLOCK: NEW BluePrint Cast Iron Block Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Iron Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear engine balance * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 64cc chamber 2.02 in. intake/1.60 in. exhaust valves 195cc intake/75cc exhaust runners * CAM SPECS: Cam Type: Roller .495 Intake .502 Exhaust 220 Intake / 224 Exhaust duration @ .050 - 114 degree lobe separation * IGNITION TIMING: 32 Degrees Total at 3,500 rpm * ALSO INCLUDES: Valve covers Oil pan Timing cover Dyno test results shipped with engine 30 month / 50,000 mile warranty

4.15 out of 5 stars ( 13 )

$5,299.00

BluePrint Engines GM 327 C.I.D. 350 HP Deluxe Dressed Long Block Crate Engines

BluePrint Engines GM 327 c.i.d. 350 hp fully dressed long block crate engines are available with a Holley Sniper EFI system or a 670 cfm carburetor with electric choke. BASIC ENGINE SPECS: * HP and torque: 350 hp / 350 lbs.-ft. * Compression ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Forged crank * Hypereutectic pistons BLOCK: * NEW BluePrint cast iron block * 4-bolt main * 4.000 in. bore * 1-Piece rear main seal * Mech fuel pump provision: Yes * Passenger side dipstick * Drilled and tapped for clutch linkage ROTATING ASSEMBLY: * New BluePrint forged crankshaft * 3.250 in. stroke * Forged 5.700 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Internal Front / External Rear CYLINDER HEADS: * BluePrint aluminum cylinder heads * 64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners CAM SPECS: * Cam Type: Roller * .495 Intake .502 Exhaust * 220 Intake / 224 Exhaust duration * At .050, 114 degree lobe separation angle IGNITION TIMING: * 32-34 degrees total at 3500 rpm ALSO INCLUDES: * Premium Vintage valve covers * Premium Vintage air cleaner * 6.75 in. harmonic balancer * Spark plugs * Under header spark plug wires (perfect for Rams Horn exhaust manifolds) * Oil pan * Timing cover * Aluminum Intake manifold * Small cap ready-to-run distributor equipped with Tach Drive and coil * Dyno tested and shipped with results * Warranty: 30 month / 50,000 mile NOTES: * Not for use in pollution-controlled vehicles.

Not Yet Reviewed

$8,499.00

BluePrint Engines 350 C.I.D. Cruiser Crate Engines

BluePrint Engines 350 c.i.d. Cruiser crate engines make an excellent choice for daily drivers and cruising. These crate engines make up to 18 inches of vacuum and are designed to work with power brakes, stock torque converter, stock gearing--and run great on 87 octane fuel. Get a new engine and bring your ride to life with BluePrint Engines Cruiser crate engines.! More features, products, and specifications include: * 341 hp / 371 lbs.-ft. torque * Compression ratio: 9.2:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front/external rear engine balance Cylinder heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.020 in. intake / 1.600 in. exhaust valves * 195cc intake / 75cc exhaust runners Roller cam specifications: * 0.477 intake / 0.471 exhaust * 202 intake / 212 exhaust duration @ 0.050 in. 115-degree LSA (Lobe Separation Angle) Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Oil pan * Timing cover * Dyno tested results shipped with engine

4.56 out of 5 stars ( 9 )

$5,099.00

BluePrint Engines Pro Series Chevy 427 C.I.D. 540 HP Dressed Long Block Crate Engines

Does your car need more power? Of course it does! Install 540 hp and be the envy of the block. BluePrint Engines Pro Series 427 c.i.d. dressed long block crate engines have the muscle you need to impress. These powerhouses feature a 30-month/50,000-mile warranty and they are the perfect choice for drivable and reliable high-end performance. Additionally, these assemblies are manufactured under strict tolerances and provide outstanding, consistent results. All of the rotating assemblies are balanced within 2 grams on a computerized balancer. BluePrint Pro Series crate engines are also dyno-tested and include the dyno sheets. For high-horsepower, big displacement engines, BluePrint Pro Series Chevy 427 c.i.d. dressed crate engines are the way to go! Features include: * BluePrint Engines cast iron block * 4340 forged crankshaft * 4340 forged connecting rods * Forged pistons * 9.5:1 compression * 4.125 in. x 4.000 in. bore/stroke * Hydraulic roller camshaft * Double roller timing chain * 64cc chamber aluminum cylinder heads * 1.6 ratio rocker arms * Carburetor * Billet distributor

5.0 out of 5 stars ( 5 )

$11,199.00

BluePrint Engines 350 C.I.D. Cruiser Base Crate Engines

BluePrint Engines 350 c.i.d. Cruiser base crate engines make an excellent choice for daily drivers and cruising. These crate engines make up to 18 inches of vacuum and are designed to work great with power brakes, stock torque converter, stock gearing, and run great on 87 octane fuel. Details and specs: * 341 hp/371 lbs.-ft. * Compression ratio: 9.0:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating Assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front/external rear engine balance Cylinder heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners Roller Cam specs: * .477 intake/.471 exhaust * 202 intake/212 exhaust duration @ .050 - 115-degree lobe separation Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Oil pan * Timing cover • Aluminum intake manifold * HEI distributor • 600 cfm Carburetor * Dyno tested results shipped with engine

4.32 out of 5 stars ( 19 )

$5,799.00

BluePrint Engines GM 400 C.I.D. 500 HP Base Long Block Crate Engines

Not your grandpa's 400—BluePrint Engines GM 400 c.i.d. 500 hp base long block crate engines are the new "mighty mouse" small blocks. Their base packages come complete with oil pans, valve covers, and front timing covers—letting you finish the engine out, your way, with fuel and ignition systems. They're also balanced, blueprinted, and dyno-tested. BluePrint Engines GM 400 c.i.d. 500 hp base crate engines feature: * Cast iron block with 4-bolt mains * Compression ratio: 10.3:1 * Forged crankshaft * OEM-type connecting rods * 150,000 psi rod bolts * Forged pistons * Hydraulic roller cam * BluePrint aluminum heads, 64cc chamber, with raised exhaust ports * Dyno test results shipped with engine * 30-month/50,000-mile warranty

4.78 out of 5 stars ( 9 )

$7,599.00

BluePrint Engines GM 383 C.I.D. 415 HP Dressed Power Adder Stroker Long Block Crate Engines

BluePrint Engines GM 383 c.i.d. 415 hp dressed power-adder stroker long block crate engines make strong foundations for nitrous, turbos, and blowers. Block features: * Cast iron * 4-bolt main * One-piece rear main seal * Passenger side dipstick * Mechanical fuel pump provision * Drilled and tapped for clutch linkage Rotating assembly: * Forged crankshaft * Forged I-beam connecting rods * Forged pistons Also includes: * Aluminum cylinder heads -- 64cc chamber -- 2.02 in. intake/1.60 in. exhaust valves -- 195cc intake/75cc exhaust runners * Hydraulic roller cam -- .536 intake/.555 exhaust -- 224 intake/236 exhaust duration at .050 -- 113 degree lobe separation * Oil pan * Valve covers * Timing cover * Harmonic balancer * 30-month/50,000-mile Warranty * Dyno-tested and shipped with results

5.0 out of 5 stars ( 1 )

$8,299.00

BluePrint Engines GM 383 C.I.D. 436 HP Fully Dressed Stroker Long Block Crate Engines

Bolt some serious power into your ride with these BluePrint Engines GM 383 c.i.d. 436 hp dressed stroker long block crate engines. These engines are built from the ground up to provide a reliable 436 hp and 443 lbs.-ft. of torque to power your street rod, muscle car or any other project that needs serious power. Each engine is hand-assembled, and precision balanced to ensure it will run smooth and strong for years to come. BluePrint GM 383 c.i.d. 436 hp dressed stroker crate engines include: * 4-bolt main block * New cast crankshaft * Hypereutectic pistons * Chevy heavy beam rods with 150,000 psi bolts * Moly rings * Balanced rotating assembly * Melling high-volume oil pump * Hydraulic Roller lifter camshaft * Heavy-duty double roller timing set * Aluminum cylinder heads * Hardened retainers and springs * Swirl polished intake and exhaust valves * Hardened pushrods * Dual plane satin finish intake manifold * Carburetion * Distributor, plug wires and plugs * Water pump * New valve covers * Brass freeze plugs * Front accessory drive with water pump, A/C compressor, alternator, and power steering pump * Dyno tested—and shipped with results

1.0 out of 5 stars ( 1 )

$8,299.00

—

$10,299.00

BluePrint Engines Low Profile GM 383 C.I.D. 436 HP Dressed EFI Long Block Crate Engines

BluePrint Engines low profile GM 383 c.i.d. 436 hp dressed EFI long block crate engines are fully Dyno tested, passed vigorous inspections, and are prepared to power up your project. These GM compatible engines are designed with a small diameter harmonic balancer, small cap distributor, and drop base air cleaner for vehicles with low firewall or hood clearance. They are a great choice to replace your tired old factory engine with fuel-injected performance. They are offered with or without front accessory drive kit. Features, specs, and contents: * Horsepower and torque: 436 hp/443 lb.-ft. * Cast iron block * 4-bolt main * 4.00 in. bore * Cast steel crankshaft * 3.750 in. stroke * OEM-type 5.700 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Aluminum cylinder heads--64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners * Hydraulic roller cam * .544 intake/.555 exhaust * 230 intake/236 exhaust duration at .050 * 110 degree lobe separation * Holley Sniper EFI, Premium vintage valve covers and air cleaner, aluminum intake manifold, oil pan, timing cover, spark plugs and under header spark plug wires, small cap ready-to-run distributor with tach drive and coil, harmonic balancer * 30 month/50,000 mile warranty

Not Yet Reviewed

$11,399.00

BluePrint Engines 350 C.I.D. Cruiser Fully Dressed Crate Engines with Fuel Injection

Complete your perfect build with a BluePrint 350 c.i.d. Cruiser fully dressed crate engine with fuel injection. The engine makes up to 18 in. of vacuum and works with power brakes, stock torque converter, stock gearing--and runs great on 87 octane fuel, which makes it excellent for daily drivers and cruising! Three models are available; compare options and select the engine that best fits your needs. Details and specs: * 341 hp / 371 lbs.-ft. * Compression ratio: 9.0:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front / external rear engine balance Cylinder Heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.02 in. intake / 1.60 in. exhaust valves * 195cc intake / 75cc exhaust runners Cam specs: * .477 intake / .471 exhaust * 202 intake / 212 exhaust duration @ .050 - 115-degree lobe separation Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Oil pan * Timing cover * Aluminum intake * HEI distributor * EFI system * Dyno test results shipped with engine

5.0 out of 5 stars ( 4 )

$6,799.00

—

$9,299.00

BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block Crate Engines with Fuel Injection

BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block crate engines with fuel injection are offered in two models—one with new block casting, pulleys, and other extras. SPECIFICATIONS FOR BOTH MODELS INCLUDE: * HP and Torque: 390 hp / 410 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum Heads * Hydraulic Roller Cam * Cast Iron Crankshaft * Hypereutectic Pistons * BLOCK: NEW BluePrint Cast Iron Block Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Iron Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear engine balance * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 64cc chamber 2.02 in. intake/1.60 in. exhaust valves 195cc intake/75cc exhaust runners * CAM SPECS: Cam Type: Roller .495 Intake .502 Exhaust 220 Intake / 224 Exhaust duration @ .050 - 114 degree lobe separation * IGNITION TIMING: 32 Degrees Total at 3,500 rpm * ALSO INCLUDES: Valve covers Oil pan Timing cover Harmonic Balancer Thermostat and Water neck Aluminum intake HEI distributor Spark plugs and wires EFI system Dyno test results shipped with engine INCLUDED ONLY ON MODEL BP3505CTFD: * Standard rotation long water pump INCLUDED ONLY ON NEW BLOCK CASTING MODEL BP3505CTFK: * Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump (does not fit Corvette)

5.0 out of 5 stars ( 1 )

$7,399.00

BluePrint Engines Pro Series Chevy 454 C.I.D. 563 HP Dressed Long Block Crate Engines

For those wanting maximum horsepower and durability that's pretty much ready to go, BluePrint Engines Pro Series Chevy 454 c.i.d. 563 hp dressed long block crate engines are right for you. In addition, every BluePrint engine is dyno-tested to make sure they hit their target horsepower and torque. Pro Series 454 dressed long blocks feature: * 563 hp, 545 ft.-lb., compression ratio 10.0:1 * BluePrint cast iron block with 4-bolt main --4.250 in. bore --1-piece rear main seal --Mechanical fuel pump provision --Passenger side dipstick --Drilled and tapped for clutch linkage * Forged crankshaft and connecting rods * Forged pistons with rings * Internal front/internal rear balanced rotating assembly * BluePrint aluminum cylinder heads --64cc chamber --2.08 in. intake/1.60 in. exhaust valves --220cc intake/67cc exhaust runners * Hydraulic roller cam --.638 intake/.622 exhaust lift --251 intake/259 exhaust duration @ .050 --114 degree lobe separation * Valve covers, oil pan, and timing cover * Harmonic balancer * MSD Pro billet distributor * 950 cfm carburetor * Aluminum intake manifold

1.0 out of 5 stars ( 1 )

$11,599.00

BluePrint Engines Pro Series Chevy 454 C.I.D. 563 HP Base Long Block Crate Engines

For those wanting maximum horsepower and durability, BluePrint Engines Pro Series Chevy 454 c.i.d. 563 hp base long block crate engines are right for you. In addition, every BluePrint engine is dyno-tested to make sure they hit their target horsepower and torque. Pro Series 454 base long blocks feature: * 563 hp, 545 ft.-lb., compression ratio 10.0:1 * BluePrint cast iron block with 4-bolt main --4.250 in. bore --1-piece rear main seal --Mechanical fuel pump provision --Passenger side dipstick --Drilled and tapped for clutch linkage * Forged crankshaft and connecting rods * Forged pistons with rings * Internal front/internal rear balanced rotating assembly * BluePrint aluminum cylinder heads --64cc chamber --2.08 in. intake/1.60 in. exhaust valves --220cc intake/67cc exhaust runners * Hydraulic roller cam --.638 intake/.622 exhaust lift --251 intake/259 exhaust duration @ .050 --114 degree lobe separation * Valve covers, oil pan, and timing cover * Harmonic balancer

3.67 out of 5 stars ( 3 )

$10,399.00

50 Results Found For "sbc hydraulic roller cam"