Availability
EMAX Industrial Plus gas-powered piston compressors deliver overwhelming performance to meet the needs of the most demanding environments. Their pumps require less maintenance, service, and downtime—and all EMAX gas-powered compressors furnish the power needed at the jobsite, garage, or shop. These units have ASME-approved air receivers and custom-built engine stands that brace the platform of the tank, allow easy belt tightening, and significantly reduce vibration. Many competitors' pumps run at double the rpm of EMAX pumps because they are much smaller and must run fast to produce enough air. EMAX Industrial Plus pumps have solid cast iron cylinders, cylinder heads, crankcases, flywheels, crankshafts, and rebuildable, forged steel connecting rods. They have large roller bearings on the crankshaft ends for stability and long bearing life. Disc intake and exhaust valves are sealed by O-rings and can be removed without disturbing the head gaskets. When it came to engines, the obvious choice for EMAX was the Honda GX Series with electric starters. Their OHV design provides excellent torque and fuel efficiency, quiet operation, and they're easy-to-use. Built for efficient airflow, effective cooling, and durability, with a slant cylinder design for smooth running—they feature mufflers with spark arresters, hydraulic valve lifters, low oil shutdown, automatic compression releases for easy starting, key switches, and battery chargers. EMAX's Honda GX engines also have engine idle-down (when the compressor is in free-wheel mode) and, with electronic ignition, excellent cold weather starting ability. Additional features of EMAX Industrial Plus gas-powered piston compressors include: * 1/4 in. ball valve drain at the front of the tank for easy access * Quality tank gauge; all safety valves and pop-offs are ASME-approved * 3/4 in. ball valve air outlet * Custom-built, heavy-duty 13-gauge expanded metal belt guard * 35 percent lower operating temperatures—reduces moisture buildup and extends pump life * Air-Stream technology provides up to 50 percent longer pump life * Intercooler and aftercooler lines to cool the air between stages and after the 2nd stage (where applicable) * Raised platforms pull air under the pumps * "V" or "W" pump shapes help eliminate hotspots and provide consistent cooling * Site glass to view oil level * Twin belts offer better belt grip and longer belt life * Head unloaders allow for load-less starting and help cool the pump in high-duty cycle applications * Pre-tested before they leave the factory * Just add a 12 V battery and battery cables and they're ready to go
Not Yet Reviewed
$6,695.00
—
$6,997.00
Previously offered in the guise of a standalone crate engine, the Godzilla is now offered as a complete package—thanks to the Ford Performance 7.3L Power Module with 10R140 automatic transmission combo kits. They are a complete powertrain solution, utilizing the 7.3L V8 Ford gasoline crate engine from the 2020 F-250 Super Duty and 10R140 automatic transmission (2WD). The Godzilla crate engine features aluminum cylinder heads, iron for the block, forged steel for the crankshaft, a 10.5:1 compression ratio, and port fuel injection. For this application, the 7.3-liter colossus develops 430 horsepower at 5,500 revolutions per minute and up to 475 lbs.-ft. (644 Nm) of torque at 4,000 revolutions per minute. The control pack bundles the powertrain control module with Ford Performance-specific calibration, an electronic throttle pedal, a Mustang Bullitt airbox, an 87-millimeter throttle body, and an adapter. The FEAD kit includes a handful of accessory drive bits. Other list of components include a starter, an alternator and a bracket, the power steering pump, tensioner, and belt. In addition to the Super Duty-spec 10R140 automatic transmission, Ford Performance also includes transmission cooler, shifter, and cable assembly, as well as all necessary mounting hardware. Kit includes: M-6007-73 Super Duty crate engine: * 7.3L displacement * 430 HP at 5,500 rpm * 475 lbs.-ft. of torque at 4,000 rpm * 10.5:1 compression * Port fuel injection M-6017-73A control pack: * PCM with Ford Performance calibration * Electronic throttle pedal * Mustang Bullitt airbox * 87mm Bullitt throttle body with adaptor M-8600-73 FEAD kit: * Alternator and bracket * Power steering pump * Tensioner * Belt * Installation hardware Production Super Duty 10R140 transmission and torque converter: * Transmission cooler * Shifter cable assembly (no shifter) * Mounting hardware * Starter and index plate
Not Yet Reviewed
$18,999.99
ATK High Performance Chrysler 360 Magnum 350 HP complete long block crate engines incorporate Engine Quests upgraded casting with the following benefits: * Thicker deck for greater strength * Improved design resists cracking * Superior port finish for increased flow * Water flow redesigned for greater thermal conductivity * Hardened exhaust seats * CNC-machined guides and seats Engine specifications: * HP: 350 * TQ: 430 * Block: OE Magnum roller block 1993-2001 * Bore/stroke: 4.040 in. x 3.580 in. * Displacement: 360 cu. in. * Crankshaft: OE cast * Rods: OE 6.123 in. * Pistons: Hypereutectic 9.3:1 compression * Rings: Chromoly * Camshaft: Hydraulic roller * Cam specs: 207/217 at 50 .496/.496 112 LSA * Timing chain: Double roller * Cylinder heads: New upgraded Engine Quest cast iron 62cc/172cc 1.78/1.50 * Rocker arms: Steel 1.6 pedestal rockers * Oil pan: 5 qt. OE front sump * Oil pump: Melling STD volume * Balancer: Externally balanced * Intake manifold: Edelbrock performer RPM air gap dual plane * Distributor: Pro billet RTR (Iron Gear) * Water pump: OE early pump * Carburetor: Quick Fuel 680 cfm vacuum secondary's electric choke * Fuel pump: Holley mechanical 110 gph * Spark plugs: Autolite * Spark plug wires: 8mm
Not Yet Reviewed
$6,898.99
Ford Performance Parts has the complete solution for your drivetrain upgrade needs with the 5.0L Coyote manual power module and T-56 manual transmission combo kit, which includes: * Gen 4X 5.0L Coyote crate engine * Tremec 6-speed manual transmission * Complete engine controller and wiring harness (control pack) It's Next Generation 5.0L power all in one complete powertrain kit. The crew at Ford Performance have spec'd out a kit to simplify the swap of the newest, most innovative 5.0L Coyote engine into just about any Ford vehicle. The Coyote power module teams the Gen 4X 5.0L Coyote V8 with a state-of-the-art Tremec 6-speed transmission, plus all the electronics and hardware to finish the installation. The engine features direct and port fuel injection, twin independent variable camshaft timing, and a lightweight plasma transferred wire arc spray aluminum engine block. Coyote power modules simplify both the shopping and build experience by kitting up the right parts that are matched to deliver potent performance with civilized drivability. The engine control pack is truly plug-and-play and simplifies conversions to a modern electronically fuel injected V8 high performance engine. Details and/or specs: * Gen 4X 5.0L Coyote engine * 460 hp at 7,000 rpm * 420 lbs.-ft. torque at 4,600 rpm * 12.0:1 compression ratio * Aluminum block * Boss 302 alternator kit * Starter and starter index plate * Control pack PCM and installation kit is tunable for power upgrades * Runs on pump gas * Steel Quicktime bellhousing * Roller pilot bearing * Tremec 6-speed transmission 2.66 1st gear * Clutch fork / throw-out bearing * Clutch kit * Billet flywheel * Installation hardware * Note: Engine will be fitted with an automatic flexplate. Included is a billet flywheel, to be installed on engine before installation into vehicle.
Not Yet Reviewed
$19,700.99
ATK High Performance GM 350 Vortec 350 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you'll need is to supply is the fuel system--inline, in-tank, or the FiTech Fuel Command Center. They're dyno-tested with your EFI system and ready to go! Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc. seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @ 50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * EFI System: Fitech Go Street EFI 400HP (throttle body, wire harness and hand held unit included) * Fuel Pump: Not Provided - must run electric pump or mechanical fuel pump with Fitech fuel command center * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine info: * Oil: Conventional/Non Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 headers
( 2 )
$5,198.99
Do you need a replacement engine for your boat? Take control of the water with BluePrint Engines marine GM 350 c.i.d. 350 hp long block crate engines. They're built from the ground up to provide a reliable 350 hp and 400 lbs.-ft. of torque to power your boat that needs serious power. Block: * 4-bolt main block * Passenger side dipstick * Square and parallel decked * Align-honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 in. straightness and roundness * Cylinders are sonic tested for thickness Rotating assembly: * Cast iron crankshaft * Hypereutectic pistons * OE style connecting rods * Balanced rotating assembly * High performance harmonic balancer Cylinder heads: * Cast iron Vortec heads * Hardened retainers and springs * 1.94 in. intake valves * 1.50 in. exhaust valves * Hardened pushrods * Intake manifold * 9.5 to 1 compression * Valve covers * Oil pan * Timing chain cover * Long slot rocker arms with positive locking nuts * Mechanical fuel pump * Carburetor with electric choke * Marine billet distributor * Hydraulic roller camshaft * Stainless steel fuel line and filter * Spark plug wires and wire looms * Spark plugs * Cast iron water pump * Dyno-tested--and shipped with results
( 1 )
$8,049.00
Pack Vortec power and stroker torque in your ride with ATK High Performance GM 383 Vortec 390 hp Stage 3 long block crate engines. These engines are hand-built and balanced to ensure a strong-running, reliable engine for your daily driver or hot rod. The 460 ft.-lbs. of twist make these extremely versatile mills that are at home in a towing rig, muscle car, or street rod. Get back out on the road with the ground-pounding power that only a stroker can give you. Engine specifications: * HP: 390 * TQ: 460 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.750 in. * Displacement: 383CI * Crankshaft: Scat nodular iron external balance rear of crank/internal balance front of the crank * Rods: Scat I Beam 5.7 in. rods with ARP 8740 bolts * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Dart vortec cast iron 67cc/165cc 2.02/1.60 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 (with scat kit) * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers
Not Yet Reviewed
$5,998.99
BluePrint Engines GM 327 c.i.d. 350 hp fully dressed long block crate engines are available with a Holley Sniper EFI system or a 670 cfm carburetor with electric choke. Both versions are also offered with or without a polished front pulley. BASIC ENGINE SPECS: * HP and torque: 350 hp / 350 lbs.-ft. * Compression ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Forged crank * Hypereutectic pistons BLOCK: * NEW BluePrint cast iron block * 4-bolt main * 4.000 in. bore * 1-Piece rear main seal * Mech fuel pump provision: Yes * Passenger side dipstick * Drilled and tapped for clutch linkage ROTATING ASSEMBLY: * New BluePrint forged crankshaft * 3.250 in. stroke * Forged 5.700 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Internal Front / External Rear CYLINDER HEADS: * BluePrint aluminum cylinder heads * 64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners CAM SPECS: * Cam Type: Roller * .495 Intake .502 Exhaust * 220 Intake / 224 Exhaust duration * At .050, 114 degree lobe separation angle IGNITION TIMING: * 32-34 degrees total at 3500 rpm ALSO INCLUDES: * Premium Vintage valve covers * Premium Vintage air cleaner * 6.75 in. harmonic balancer * Spark plugs * Under header spark plug wires (perfect for Rams Horn exhaust manifolds) * Oil pan * Timing cover * Aluminum Intake manifold * Small cap ready-to-run distributor equipped with Tach Drive and coil * Dyno tested and shipped with results * Warranty: 30 month / 50,000 mile * Front accessory drive with water pump, A/C compressor, alternator, and power steering pump NOTES: * Not for use in pollution-controlled vehicles. * The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles.
Not Yet Reviewed
$8,249.00
—
$11,249.00
BluePrint Engines GM 327 c.i.d. 350 hp fully dressed long block crate engines are available with a Holley Sniper EFI system or a 670 cfm carburetor with electric choke. BASIC ENGINE SPECS: * HP and torque: 350 hp / 350 lbs.-ft. * Compression ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Forged crank * Hypereutectic pistons BLOCK: * NEW BluePrint cast iron block * 4-bolt main * 4.000 in. bore * 1-Piece rear main seal * Mech fuel pump provision: Yes * Passenger side dipstick * Drilled and tapped for clutch linkage ROTATING ASSEMBLY: * New BluePrint forged crankshaft * 3.250 in. stroke * Forged 5.700 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Internal Front / External Rear CYLINDER HEADS: * BluePrint aluminum cylinder heads * 64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners CAM SPECS: * Cam Type: Roller * .495 Intake .502 Exhaust * 220 Intake / 224 Exhaust duration * At .050, 114 degree lobe separation angle IGNITION TIMING: * 32-34 degrees total at 3500 rpm ALSO INCLUDES: * Premium Vintage valve covers * Premium Vintage air cleaner * 6.75 in. harmonic balancer * Spark plugs * Under header spark plug wires (perfect for Rams Horn exhaust manifolds) * Oil pan * Timing cover * Aluminum Intake manifold * Small cap ready-to-run distributor equipped with Tach Drive and coil * Dyno tested and shipped with results * Warranty: 30 month / 50,000 mile NOTES: * Not for use in pollution-controlled vehicles.
Not Yet Reviewed
$9,249.00
Offering the same quality and durability as their Industrial Plus Series (without the extra cost of some features), EMAX Industrial piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with built-in fans. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. Industrial Series compressors have name brand, open-drip (OPD), low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. With low harmonic distortion, these motors provide much higher torque in cold weather starting, and require less electricity to start. Other features include large starting and running capacitors, and dynamically balanced armatures. Running and starting windings are all copper-wound for premium efficiency, reliable performance, and durability. These motors meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX uses only taper-lock style, 2-groove pulleys with dual 2-groove, B-style belts to drive their pumps. Dual belts ensure long belt life with low vibration for smoother, quieter operation because dual belts do not have to be as tight as a single belt. Tighter belts put more load on the compressor pump and the motor bearings; that decreases the life of both. Much better than a fixed bore pulley with a set screw; the taper-lock design locks the pulley in position on the motor shaft preventing it from loosening or moving. EMAX piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * OSHA-approved, 13-gauge steel, expanded metal belt guards * ASME code-compliant tanks * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings * Big 1 3/8 in. output shafts * 15 Service Factor motors can be pulled 15 percent over full load
( 2 )
$7,797.00
—
$9,238.00
Do you need a replacement engine for your boat? Take control of the water with BluePrint engines marine GM 383 c.i.d. 405 hp Stroker dressed long block crate engines with cast components. They get the job done with quality-built components designed for marine use. BluePrint engines are built for speed on the open water, performance, and reliability, all in one package. Block: * 4-bolt main block * Passenger side dipstick * Square and parallel decked * Align-honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 in. straightness and roundness * Cylinders are sonic tested for thickness Rotating assembly: * Cast iron crankshaft * Hypereutectic pistons * Heavy beam connecting rods * Moly rings * Balanced rotating assembly * High-volume oil pump * Roller camshaft * Heavy-duty double roller timing set * High performance harmonic balancer Cylinder heads: * Cast iron Vortec heads * Hardened retainers and springs * 2.02 in. swirl-polished intake valves * 1.60 in. swirl-polished exhaust valves * Hardened pushrods * Cast iron marine intake manifold * 9.5 to 1 compression * BluePrint Signature Series polished aluminum valve covers * Rubber coated steel oil pan * Chrome timing chain cover * Long slot rocker arms with positive locking nuts * Mechanical fuel pump * Carburetor with electric choke * Marine billet distributor * High performance coil * Stainless steel fuel line and filter * Spark plug wires and wire looms * Spark plugs * Cast iron circulating water pump * Dyno-tested--and shipped with results
Not Yet Reviewed
$8,449.00
Satisfy your craving for horsepower with BluePrint 347 c.i.d. 415 hp dressed stroker long block crate engines are meticulously-built Blue Oval engines from a solid, reputable company that does the job right and stands behind their work. BluePrint custom-built crate and stroker performance engines are always balanced and dyno-tested to add a lot of muscle to your fun! Plus, they're shipped with the dyno results so you can see the BluePrint difference! So, where will you get your horsepower from? Block: * New BluePrint cast iron block * Square and parallel decked * Align-honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 in. straightness and roundness * Cylinders are sonic tested for thickness Rotating assembly: * New cast steel crankshaft * New rods with 150,000 psi bolts * Forged pistons * Moly rings * Balanced rotating assembly * High-volume oil pump * Hydraulic roller camshaft * Heavy-duty, double-roller timing set Cylinder heads: * Aluminum heads * Swirl-polished intake and exhaust valves * Hardened pushrods Plus: * Dual plane, satin aluminum intake manifold * Carburetor * Distributor * Valve covers * Painted oil pan * Brass freeze plugs
( 7 )
$7,949.00
—
$10,449.00
BluePrint Builder Series 632/815HP Blackout Reaper crate engine and 4L80E transmission combos take away the hassle of properly pairing a carbureted Chevy Gen VI big block 454 performance engine and 4-speed automatic transmission for your build. These powerful assemblies deliver 815 horsepower and 775 lbs.-ft. of torque with BluePrint aluminum cylinder heads and hydraulic roller camshaft to go with forged pistons, a forged crankshaft, and forged connecting rods. The front accessory drive includes the alternator, power steering pump, A/C compressor, and water pump for the cast iron block which features a tall deck. When you are looking for a new powertrain, go with the authority in crate engines and order your very own BluePrint Builder Series 632/815HP Blackout Reaper crate engine and 4L80E transmission combo. More product features and details include: * Compression ratio of 11.0:1 * Camshaft offers 0.698 in. intake/exhaust lift with 272 intake and 282 exhaust duration at 0.050 in. lift and a 110 LSA * Stroke is 4.750 in. with 6.635 in. long connecting rods * Block is a one-piece rear main seal, 4-bolt main setup with a 4.600 in. bore and mechanical fuel pump provision * Rotating assembly is internally balanced and features H-beam connecting rods * BluePrint PS8012 cylinder heads provide a 119cc combustion chamber, 2.300 in. intake and 1.880 in. exhaust valves, plus 358cc intake/125cc exhaust runners and a 0.300 in. raised exhaust port (compared to OEM casting) * This combo also includes the 1,250 cfm carburetor, electric fuel pump, single plane satin finished aluminum intake manifold, spark plugs/wires, valve covers, Pro Billet distributor, harmonic balancer, thermostat with housing, and an oil pan * Spark plug model BPP7938 NGK 7938 BKR5E (0.750 in. reach, 14mm thread, 5/8 in. hex, plug; gapped to 0.035 in.) * Harmonic balancer is non-weighted Transmission features and details include: * Electronic transmission controller * Lockup capable * Torque converter with 3,800-4,200 rpm advertised stall rating * Flexplate (non-weighted) and starter * Gear ratios are 2.482:1 (first), 1.482:1 (second), 1.000:1 (third), 0.750:1 (fourth), and 2.077:1 (reverse) * Builder's responsibility to verify clearances for exhaust routing, shift linkage, steering components, etc. * Low profile front accessory design may require fabrication for power steering hoses, alternator wiring, and any additional fittings Other notes: * Recommended fuel is 91 octane and recommended break-in oil is BPP710 * Initial timing is 10-16 degrees * Total timing is 32-34 degrees by 2,500 rpm * Firing order is 1-8-4-3-6-5-7-2 * Not for EGR * Recommended headers include those made by Ultimate Headers, Hedman Husler race headers, and Sanderson headers
Not Yet Reviewed
$29,999.00
Edelbrock 416 c.i.d. E-Force supercharged long block crate engines for GM LS produce an astounding 720 hp and 695 ft.-lbs. of torque, on 91 octane pump gas! The 4.000 in. stroke and 4.065 in. bore push this LS3 out to a whopping 416 c.i.d. for incredible low-end torque, while the 9.5:1 compression ratio allows for safe and reliable supercharged performance. These E-Force long block crate engines come complete with essential supercharger kit components, and the superchargers feature driver side throttle body orientation for ease of intake routing, along with a Corvette belt offset for a compact installation. The engines include six quarts of Edelbrock performance SAE30 break-in oil for initial start-up. Additional features for these Edelbrock supercharged long blocks: * New GM aluminum LS3 block * Forged and balanced crankshaft * Forged H-beam connecting rods * Forged aluminum pistons * Hydraulic roller camshaft--215 degrees intake/247 degrees exhaust duration at 0.050 in. * Roller rocker arms--.629 in. intake/.656 in. exhaust valve lift * Edelbrock E-Force LS3 supercharger features Eaton TVS 2,300cc/rev rotors * Electric intercooler water pump * Intercooler plumbing * Intercooler recovery tank * Fuel rails * 60 lbs./hr. fuel injectors * Mass airflow sensor housing * Reusable air filter
Not Yet Reviewed
$31,524.95
—
$35,156.95
ATK High Performance GM 489 Stroker 565 hp Stage 3 long block crate engines are new versions based off the later model Gen V and require an electric fuel pump. ATK Stage 3 or complete dressed engines are designed for those wanting to drop the engine into their project and fire it up. They have outfitted the engines as completely as possible to save you time and headaches. Typically ATK GM 489 Stroker 565 hp complete dressed engines consist of: * Seasoned OE block with 4-bolt mains * Nodular iron crankshaft * 4340 forged I-beam connecting rods * Forged pistons * Chromoly piston rings * Hydraulic roller camshaft * Performance aluminum cylinder heads * Billet aluminum rocker arms * Valve covers * Timing set and cover * Oil pan, oil pump and pick-up tube * Performance intake manifold * Distributor * Long water pump * Front damper * Flexplate * 780cfm carburetor * Spark plugs and wires
Not Yet Reviewed
$10,298.99
ATK High Performance GM 489 Stroker 565 hp Stage 2 long block crate engines are new versions based off the later model Gen V and require an electric fuel pump. ATK Stage 2 or mid-dressed engines are designed for those that may have their own component parts already, and who also are interested in completing the finishing touches of the build themselves. Typically ATK GM 489 Stroker 565 hp mid-dressed engines consist of: * Seasoned OE block with 4-bolt mains * Nodular iron crankshaft * 4340 forged I-beam connecting rods * Forged pistons * Chromoly piston rings * Hydraulic roller camshaft * Performance aluminum cylinder heads * Billet aluminum rocker arms * Valve covers * Timing set and cover * Oil pan, oil pump and pick-up tube * Performance intake manifold * Distributor * Long water pump * Front damper * Flexplate
Not Yet Reviewed
$9,598.99
ATK High Performance GM 496 Stroker 600 hp Stage 2 long block crate engines are designed for street/strip use, so expect big power with a rough idle. They require an electric fuel pump. ATK Stage 2 or mid-dressed engines are designed for those that may have their own component parts already, and who also are interested in completing the finishing touches of the build themselves. Typically ATK GM 496 Stroker 600 hp mid-dressed engines consist of: * Seasoned OE block with 4-bolt mains * 4340 forged crankshaft * 4340 forged H-beam connecting rods * Forged pistons * Chromoly piston rings * Hydraulic roller camshaft * Aluminum cylinder heads * Billet aluminum full roller rocker arms * Valve covers * Timing set and cover * Oil pan, oil pump and pick-up tube * Performance intake manifold * Distributor * Long water pump * Front damper * Flexplate
Not Yet Reviewed
$10,998.99
ATK High Performance Ford 502 545 HP Stage 3 EFI long block crate engines are based on dyno-proven combinations built with name brand parts. Here are product details: Engine Specifications: * HP: 545 * TQ: 595 * Block: Seasoned OE block 1987-92 * Bore/Stroke: 4.400 x 4.150 * Displacement: 502 * Crankshaft: Scat nodular iron internal balance * Rods: Scat 4340 forged I-beam with ARP 8740 bolts * Pistons: Hypereutectic 9.5.1 compression * Rings: Moly * Camshaft: Hydraulic flat tappet * Cam specs: 253/253 at 50 .585in/.585ex 110LSA * Timing chain: Double roller * Cylinder heads: Edelbrock performer RPM aluminum 75cc/292cc 2.190/1.760 * Rocker arms: Stainless steel 1.73 ratio * Oil pan: Front sump * Oil pump: Melling high volume * Balancer: PowerBond internal balance PB1210-N * Flexplate/Flywheel: Pioneer internal balance FRA-207 * Intake manifold: Edelbrock performer RPM dual plane 7166 * Distributor: Pro billet RTR (Iron Gear) * Water pump: OE cast iron * Carburetor: Quick Fuel 780 cfm vacuum secondary's electric choke HR-780 * Fuel pump: Holley mechanical 110 gph 12-460-11 * Spark plugs: AutoLite 3923 * Spark plug wires: 8mm Additional engine Info: * Oil: Conventional / Non-Synthetic 10W30 with Comp Cam zinc additive 159 for first 3,000 miles * Oil filter: Wix or K&N per application * Timing: 34-36 degrees * Spark plug gap: .035 in. * Firing order: 15426378 * Octane: 91+ * Stall converter: 2200-2500 * Exhaust: 1 3/4 – 2 in. headers
Not Yet Reviewed
$9,939.99
ATK High Performance GM 496 Stroker 600 hp Stage 1 long block crate engines are designed for street/strip use, so expect big power with a rough idle. They require an electric fuel pump. ATK Stage 1 or base engines are designed for those that may have their own component parts already, and who also are interested in completing out the build themselves. Typically ATK GM 496 Stroker 600 hp base engines consist of: * Seasoned OE block with 4-bolt mains * 4340 forged crankshaft * 4340 forged H-beam connecting rods * Forged pistons * Chromoly piston rings * Hydraulic roller camshaft * Aluminum cylinder heads * Billet aluminum full roller rocker arms * Timing set and cover * Oil pan, oil pump and pick-up tube * Valve covers
Not Yet Reviewed
$9,398.99
ATK High Performance GM 489 Stroker 565 hp Stage 1 long block crate engines are new versions based off the later model Gen V and require an electric fuel pump. ATK Stage 1 or base engines are designed for those that may have their own component parts already, and who also are interested in completing out the build themselves. Typically ATK GM 489 Stroker 565 hp base engines consist of: * Seasoned OE block with 4-bolt mains * Nodular iron crankshaft * 4340 forged I-beam connecting rods * Forged pistons * Chromoly piston rings * Hydraulic roller camshaft * Performance aluminum cylinder heads * Billet aluminum rocker arms * Valve covers * Timing set and cover * Oil pan, oil pump and pick-up tube
Not Yet Reviewed
$8,998.99
EMAX Stationary 24 hp Kubota Diesel-Driven 90 cfm Rotary Screw Air Compressors deliver premium performance, quality, and value. E450 Series features: * Rotary screw 100% duty cycle * Progressive flow regulation * Starting system with closed air valve * Operation at high ambient temperatures as standard * Air-oil separation in three steps * Electric diesel fuel pump * Removeable side panels * Easily accessible air outlets and fuel tank * Perfect for mobile applications * Compact design for easy mobility * DOT-certified for highway use, licensing, and title registration * Variable speed throttle on demand control, saves fuel usage and unit wear
Not Yet Reviewed
$14,290.00
EMAX Trailer-Mounted 24 hp Kubota Diesel-Driven 90 cfm Rotary Screw Air Compressors deliver premium performance, quality, and value. E450 Series features: * Rotary screw 100% duty cycle * Progressive flow regulation * Starting system with closed air valve * Operation at high ambient temperatures as standard * Air-oil separation in three steps * Electric diesel fuel pump * Removeable side panels * Easily accessible air outlets and fuel tank * Adjustable tow bar 2 in. ball hitch * Perfect for mobile applications * Compact design for easy mobility * DOT-certified for highway use, licensing, and title registration * Variable speed throttle on demand control, saves fuel usage and unit wear
Not Yet Reviewed
$14,995.00
EMAX Stationary 24 hp Kubota Diesel-Driven 115 cfm Rotary Screw Air Compressors deliver premium performance, quality, and value. E450 Series features: *Rotary screw 100% duty cycle * Progressive flow regulation * Starting system with closed air valve * Operation at high ambient temperatures as standard * Air-oil separation in three steps * Electric diesel fuel pump * Removeable side panels * Easily accessible air outlets and fuel tank * Perfect for mobile applications * Compact design for easy mobility * DOT certified for highway use, licensing, and title registration * Variable speed throttle on demand control, saves fuel usage and unit wear
Not Yet Reviewed
$15,877.00
EMAX Trailer-Mounted 24 hp Kubota Diesel-Driven 115 cfm Rotary Screw Air Compressors deliver premium performance, quality, and value. E450 Series features: * Dual axle locks * Progressive flow regulation * Starting system with closed air valve * Operation at high ambient temperatures as standard * Air-oil separation in three steps * Electric diesel fuel pump * Removeable side panels * Easily accessible air outlets and fuel tank * Auto adjustable height tow bar * Perfect for mobile applications * Weighs less than 440 lbs. * Compact design for easy mobility * DOT-certified for highway use, licensing, and title registration * Variable speed = higher fuel efficiency + longer life
Not Yet Reviewed
$16,991.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
