Availability
Mopar Performance 6.2L Supercharged Hemi crate engines exert a monstrous 707 hp and 650 lbs.-ft. of torque. These complete Hellcrate engine assemblies includes water pump, flywheel and clutch, front sump oil pan, intake manifold with throttle body, fuel injectors and coil packs. You've asked for it and Mopar delivered. Features and specs include: * 376 cu. in. * 103.9mm bore * 90.9mm stroke * Cast iron block with 4-bolt powder metal main caps * Forged steel crank material * Connecting rods and floating pins with diamond-like coating * Forged piston material * Nodular iron camshaft * Valve/lift duration at 0.15mm: Intake--14.25(0.561)mm, 278 degrees, hollow stems Exhaust--14.0(0.551)mm, 304 degrees, sodium-filled stems * 356 aluminum, HEMIspherical chamber cylinder heads * 54.3mm intake valve size * 42mm exhaust valve size * 9.5:1 compression ratio * 6,200 max rpm
Not Yet Reviewed
$17,834.99
Edelbrock Gen III 426 HEMI E-Force Supercharged long block crate engines start with brand new iron Mopar 392 blocks. The engines are then assembled with high-quality components, including Edelbrock E-Force supercharger systems featuring Eaton TVS R2650 rotors—which provide unparalleled efficiency, whisper quiet operation, and OEM reliability. A 4.090 in. bore and 4.050 in. stroke help these HEMI engines produce incredible low-end torque, while the 9.9:1 compression ratio allows for safe and reliable supercharged performance on 91 octane pump gas. Edelbrock Gen III 426 HEMI E-Force Supercharged long block crate engines are available with or without electronics (ECU with tune and wiring harness). Engine Specifications: * Displacement: 426 c.i.d. * Horsepower: 808 hp * Torque: 762 lbs.-ft. * Compression: 9.9:1 * Block: New iron Mopar 392 * Crankshaft: Forged 4340 * Pistons: Forged aluminum—5cc * Rods: Forged H-beam * Camshafts: Comp Cams 226 degrees/234 degrees, .619/.612, 116 LSA * Rocker arms: Mopar OEM * Induction: E-Force R2650 Supercharger * Cylinder heads: Edelbrock Performer RPM * Finish: Black powdercoat * Warranty: 2-year/unlimited mileage The high twist, 4-lobe R2650 rotor design is 15 percent larger than the TVS 2300 and features several improvements to maximize efficiency and performance at upper rpms. Improvements and advantages of R2650 rotors over R2300 rotors: * 170 degree twist (versus 160) * Better sealing with optimized length-to-diameter ratio * Increased durability with larger bearings and timing gears * Pressure relief ports in bearing plate for reduced input power * 4 percent more efficient * 15 percent larger displacement * 18 percent less input power required * 25 percent more airflow at 18,000 rpm and 14 psi boost (2.0 pressure ratio)
Not Yet Reviewed
$28,418.95
—
$32,726.95
Mopar Replacement 6.4L 388 c.i.d. Hemi long block crate engines are not remanufactured engines; these are brand new fully assembled V8 engines with brand new components. They feature a deep skirted cast iron block, aluminum heads, a cast crank. Add your choice of intake manifold, valve covers and other components to complete the perfect engine for your hot rod or truck. The engines are ideal for swapping into Mopar applications such as Jeep, Dodge, and Chrysler.
Not Yet Reviewed
$8,536.99
Edelbrock Gen III 426 HEMI E-Force long block crate engines make a great foundation for any high-horsepower forced induction Mopar build. These new iron Mopar 392 blocks have a compact design that allows for a seamless swap into most platforms; eliminating the need for modifications to your engine bay or hood. They are topped with Edelbrock Performer RPM cylinder heads.
Not Yet Reviewed
$24,366.95
Summit Bucks
BluePrint Engines Pro Series Mopar 426 c.i.d. EFI base long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 610 hp and 525 lbs.-ft. of torque. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal --- ROTATING ASSEMBLY: Forged steel crankshaft 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III HEMI Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- PS426CTF ALSO INCLUDES: Fuel injection Throttle body Harmonic balancer Fabricated intake manifold Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Compression ratio: 10.48:1 Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel delivery type: Fuel injected -- Spark plug: NGK 97408/ LZTR6AP11EG -- Spark plug gap: .043 in. -- Harmonic balancer: Non-weighted -- Flexplate / Flywheel: Non-weighted -- Stall converter: 2500+ -- Intake manifold: Fabricated aluminum Gen III HEMI -- Fuel recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$13,799.00
—
$16,899.00
BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 872 hp and 764 lbs.-ft. of torque. These engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crank 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Whipple 3.0L supercharger Supercharger fluid reservoir Hellcat throttle body Harmonic balancer Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Whipple 3.0L supercharger -- Spark Plug: NGK 5107 -- Spark Plug Gap: .025 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Supercharger -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$26,799.00
—
$26,899.00
Summit Bucks
BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 610 hp and 525 lbs.-ft. of torque. The engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW OEM Hellcat engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crankshaft 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Holley Terminator engine harness Fuel injection Throttle body Harmonic balancer Fabricated intake Manifold Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Fuel Injected -- Spark Plug: NGK 97408/ LZTR6AP11EG -- Spark Plug Gap: .043 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Fabricated Aluminum Gen III HEMI -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$18,799.00
—
$18,899.00
BluePrint Engines Pro Series Mopar 426 c.i.d. Base dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 872 hp and 764 lbs.-ft. of torque. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crank 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Whipple 3.0L supercharger Supercharger fluid reservoir Hellcat throttle body Harmonic balancer Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Holley Terminator ECU controller kit and wiring harness --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Whipple 3.0L supercharger -- Spark Plug: NGK 5107 -- Spark Plug Gap: .025 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Supercharger -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$24,299.00
Our Summit Racing™ 1972-93 Dodge truck Mopar EFI engine swap Pro Packs deliver engineered swap systems that eliminate the guesswork and doubt, while saving you the time trying to match up universal parts. We've brought together Hooker, Lakewood, and BluePrint engines, creating a package of power and performance for your truck. Each Pro Pack contains Hooker BlackHeart engine mount brackets, transmission crossmember, polyurethane transmission mounts, and 304 stainless steel Gen III Hemi swap mid-length headers, along with Lakewood engine mounts. A BluePrint Chrysler Hemi-compatible 426 c.i.d. ProSeries fuel-injected engine, base dressed or deluxe dressed, completes the package. Select the Summit™ engine swap Pro Pack desired for your Dodge truck. Notes: * Base dressed ProSeries engine includes water pump * Deluxe dressed ProSeries engine includes spark plugs and front accessory drive with water pump, alternator, power steering pump, and A/C compressor available with black or polished pulleys Engine specs: * 610 hp/525 lb.-ft. torque * Compression ratio: 10.48:1 Block: * New "BGE" Hellcat engine block * 4-bolt main * 4.090 in. bore * One-piece rear main seal Rotating Assembly: * Forged steel crank * 4.050 in. stroke * 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * Gen III Hemi Apache aluminum cylinder heads * 73cc chamber * 2.140 in. intake/1.650 in. exhaust valves Camshaft specs: * Hydraulic roller cam * .610 intake/.611 exhaust lift * .614 intake/.614 exhaust lift (base dressed) * 231 intake/255 exhaust duration at .050 in. * 113-degree LSA * 115-degree LSA (base dressed) Ignition timing: Controlled by ECU Also included with engine: * Fuel injection * Throttle body * Fabricated intake manifold * Harmonic balancer * Muscle car-style mid-sump swap oil pan * Coil(s) * Timing cover (Car) * Valve covers * Holley Terminator ECU controller kit and wiring harness
Not Yet Reviewed
$17,504.09
—
$19,504.09
Our Summit Racing™ 1970-74 Challenger and Barracuda Mopar EFI engine swap Pro Packs deliver engineered swap systems that eliminate the guesswork and doubt, while saving you the time you would have spent trying to match up universal parts. We've brought together Hooker, Lakewood, and BluePrint engines, creating a package of power and performance for your vehicle. Each Pro Pack contains Hooker BlackHeart engine mount brackets, transmission crossmember, polyurethane transmission mounts, and 304 stainless steel Gen III Hemi swap headers, along with Lakewood engine mounts. A Chrysler Hemi-compatible 426 c.i.d. ProSeries fuel-injected engine, base dressed or deluxe dressed, completes the package. Select the Summit™ engine swap Pro Pack desired for your Challenger or Barracuda. Notes: * Base dressed ProSeries engine includes water pump * Deluxe dressed ProSeries engine includes spark plugs and front accessory drive with water pump, alternator, power steering pump, and A/C compressor with either black or polished pulleys Engine specs: * 610 hp/525 lb.-ft. torque * Compression ratio: 10.48:1 Block: * New "BGE" Hellcat engine block * 4-bolt main * 4.090 in. bore * One-piece rear main seal Rotating Assembly: * Forged steel crank * 4.050 in. stroke * 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * Gen III Hemi Apache aluminum cylinder heads * 73cc chamber * 2.140 in. intake/1.650 in. exhaust valves Cam specs: * Hydraulic roller cam * .610 intake/.611 exhaust lift * .614 intake/.614 exhaust lift (base dressed) * 231 intake/255 exhaust duration at .050 in. * 113-degree LSA * 115-degree LSA (base dressed) Ignition timing: Controlled by ECU Also included with engine: * Fuel injection * Throttle body * Fabricated intake manifold * Harmonic balancer * Muscle car-style mid-sump swap oil pan * Coil(s) * Timing cover (Car) * Valve covers * Holley Terminator ECU controller kit and wiring harness
Not Yet Reviewed
$17,755.24
—
$19,755.24
Our Summit Racing™ 1966-72 Mopar B-Body EFI engine swap Pro Packs deliver engineered swap systems that eliminate the guesswork and doubt, while saving you the time you would have spent trying to match up universal parts. We've brought together Hooker, Lakewood, and BluePrint engines, creating a package of power and performance for your vehicle. Each Pro Pack contains Hooker BlackHeart engine mount brackets, transmission crossmember, and polyurethane transmission mounts, along with Lakewood engine mounts. A Chrysler Hemi-compatible 426 c.i.d. ProSeries fuel-injected engine, base dressed or deluxe dressed, completes the package. Select the Summit™ engine swap Pro Pack desired for your Mopar B-Body. Notes: * Base dressed ProSeries engine includes water pump * Deluxe dressed ProSeries engine includes spark plugs and front accessory drive with water pump, alternator, power steering pump, and A/C compressor with either black or polished pulleys Engine specs: * 610 hp/525 lb.-ft. torque * Compression ratio: 10.48:1 Block: * New "BGE" Hellcat engine block * 4-bolt main * 4.090 in. bore * One-piece rear main seal Rotating Assembly: * Forged steel crank * 4.050 in. stroke * 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * Gen III Hemi Apache aluminum cylinder heads * 73cc chamber * 2.140 in. intake/1.650 in. exhaust valves Cam specs: * Hydraulic roller cam * .610 intake/.611 exhaust lift * .614 intake/.614 exhaust lift (base dressed) * 231 intake/255 exhaust duration at .050 in. * 113-degree LSA * 115-degree LSA (base dressed) Ignition timing: Controlled by ECU Also included with engine: * Fuel injection * Throttle body * Fabricated intake manifold * Harmonic balancer * Muscle car-style mid-sump swap oil pan * Coil(s) * Timing cover (Car) * Valve covers * Holley Terminator ECU controller kit and wiring harness
Not Yet Reviewed
$17,417.29
—
$19,417.29
On Sale
Our Summit Racing™ 1973-76 Mopar A-Body EFI engine swap Pro Packs deliver engineered swap systems that eliminate the guesswork and doubt, while saving you the time you would have spent trying to match up universal parts. We've brought together Hooker components and BluePrint engines, creating a package of power and performance for your vehicle. Each Pro Pack contains Hooker BlackHeart engine mount brackets, transmission crossmember, polyurethane transmission mounts, and 304 stainless steel Mopar A-Body Gen III Hemi swap headers. A Chrysler Hemi-compatible 426 c.i.d. ProSeries fuel-injected engine, base dressed or deluxe dressed, completes the package. Select the Summit™ engine swap Pro Pack desired for your A-Body. Notes: * Base dressed ProSeries engine includes water pump * Deluxe dressed ProSeries engine includes spark plugs and front accessory drive with water pump, alternator, power steering pump, and A/C compressor with either black or polished pulleys Engine specs: * 610 hp/525 lb.-ft. torque * Compression ratio: 10.48:1 Block: * New "BGE" Hellcat engine block * 4-bolt main * 4.090 in. bore * One-piece rear main seal Rotating Assembly: * Forged steel crank * 4.050 in. stroke * 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * Gen III Hemi Apache aluminum cylinder heads * 73cc chamber * 2.140 in. intake/1.650 in. exhaust valves Cam specs: * Hydraulic roller cam * .610 intake/.611 exhaust lift * .614 intake/.614 exhaust lift (base dressed) * 231 intake/255 exhaust duration at .050 in. * 113-degree LSA * 115-degree LSA (base dressed) Ignition timing: Controlled by ECU Also included with engine: * Fuel injection * Throttle body * Fabricated intake manifold * Harmonic balancer * Muscle car-style mid-sump swap oil pan * Coil(s) * Timing cover (Car) * Valve covers * Holley Terminator ECU controller kit and wiring harness
Not Yet Reviewed
$18,243.06
—
$20,243.06
$18,144.06
—
$20,144.06
Modal Header