Free Shipping on Orders Over $125 at Summit Racing

Roadster Shop 1968-72 Chevelle SPEC Chassis Kits

SPEC is an engineering focused approach using the latest in manufacturing technology to build the lightest, strongest, and easiest to install complete chassis system. These technologies have been used to streamline procedures, resulting in lower cost and shorter lead times. The SPEC independent front suspension is engineered to deliver outstanding performance wrapped up in user-friendly package. A completely new proprietary suspension geometry has been designed to provide the best balance of ride quality and performance in its class. Roadster Shop offers SPEC chassis kits for 1968-72 Chevelle models. Product benefits: * No kinks, bends or stressed areas that are prone to flex like mandrel bent tubing * Ability to contour to stock floors for a low-profile design. * Stronger, lighter, and more precise * CNC-located factory mounts built into the frame for easy, vehicle-specific installation * Frame rail designs to accommodate mini-tubs * Aggressive 7 in. ride height for the modern pro-touring look * 100 percent bolt-on application Standard features: * RS exclusive "Laser Rails" precision CNC laser-cut and contoured * Crossmembers and chassis bracing to allowing for 3 in. exhaust * Engine mounts for SBC, BBC, or optional LS & LT * Adjustable, drop out trans mount * Utlizes factory body, bumper, and core support mounts for a true bolt-on installation * SPEC IFS * RS SV by Fox fixed valve coilovers * Power rack and pinion steering * Easy-to-adjust upper A-arm eccentric mounts for fast and accurate alignments * Wilwood Pro Spindle * Parallel 4-Bar rear suspension * RS SV by Fox fixed valve coilovers * Ford 9 in. housing with 31 spline axles * Narrowed rear frame rails allow for wider rear tires when mini-tubbed

Not Yet Reviewed

$21,301.99

Trick Flow® PowerPort® Top-End Engine Kits for Big Block Mopar 440

Carefully tuned by Trick Flow® engineers to deliver optimum horsepower and torque on a big block Mopar 440, these PowerPort top-end engine kits save you cash and take the guesswork out of designing a winning engine combo. Each kit is built around a set of dyno-proven PowerPort 240 cylinder heads and includes a Track Max® hydraulic roller camshaft, a Track Heat® intake manifold, 1.6 ratio roller rocker arms with shafts and hold-down bolts, MLS head gaskets, a cylinder head bolt kit, and an intake gasket set with valley pan.

Not Yet Reviewed

$5,379.99

Roadster Shop SPEC Chassis Kits

Roadster Shop SPEC chassis kits offer Roadster Shop quality at an affordable price point. The SPEC Series is an engineering-focused approach, using the latest in manufacturing technology, to build the lightest, strongest, and easiest-to-install complete chassis systems. These technologies have been used to streamline procedures resulting in lower cost and shorter lead times. The SPEC independent front suspension is engineered to deliver outstanding performance in a user friendly package. It features proprietary suspension geometry designed to provide the best balance of ride quality and performance in its class. Available as On-The-Shelf, pre-configured chassis or custom specifications to suit your needs. Features and benefits of Roadster Shop SPEC chassis kits include: * Full-chassis performance at a smaller component price * Unparalleled quality * Add the strength of a full frame with no floor modifications on most applications * CNC laser-cut, TIG-welded, and contoured "Laser Rails" frame rails * No kinks, bends, or stressed areas that are prone to flex like mandrel-bent tubing * Stronger, lighter, and more precise * CNC-located factory mounts built into the frame for easy, vehicle specific installation * Frame rails accommodate mini-tubs and wider wheels * Aggressive ride heights for the modern pro-touring look * Choice of coilover or air suspension for many applications * Air suspension chassis will lay the rockers on the ground (varies with tire size) * Truck rear frame rail kick ups engineered for minimal bed modifications while allowing rockers to lie on the ground * Crossmembers and chassis bracing allow 3 in. exhaust * Adjustable, drop-out transmission mounts (tunnel mods may be necessary for larger T-56 and 4L80 transmissions) * Vehicle specific body (cab and bed on trucks), bumper, and core support mounts * Single-adjustable billet coilovers * Power rack and pinion steering * Easy-to-adjust upper A-arm eccentric mounts for fast and accurate alignments * Wilwood Pro Spindles * Parallel 4-bar rear suspension * Ford 9 in. housing with 31 spline axles * Optional mounts, coilovers, sway bars, brake packages, and rear-end gearing available on custom-order chassis * 5 x 4.75 wheel bolt pattern * Frames are shipped as bare steel

4.21 out of 5 stars ( 14 )

$20,375.99

—

$20,649.99

ProCharger P-1SC-1 Supercharger Kits

ProCharger P-1SC-1 supercharger kits are absolutely the most powerful and reliable supercharger systems offered for your vehicle. For street use or at the track, they'll deliver the largest increase in horsepower and torque available from any supercharger system. Their extremely low-charge air temperatures provide much better engine longevity by protecting your motor from detonation. These supercharger kits are designed with a fundamental understanding of the physics behind supercharging and are engineered to the highest quality standards. By using CNC machining and nearly indestructible 7075 T-6 aircraft aluminum to produce the largest and strongest impellers in the industry, they're able to again improve both performance and reliability. The P-1SC-1 kits are the only centrifugal superchargers to incorporate billet impellers in production models. Hundreds of models are available to ensure precise fitment on your vehicle. Select the ProCharger system and options tailored for your application.

4.78 out of 5 stars ( 9 )

$8,199.00

Edelbrock Total Power Package 451 HP 409 W Big Block Chevy Top-End Engine Kits

Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.

Not Yet Reviewed

$6,722.95

BDS Suspension Lift Kits with Fox 2.5 Performance Elite Coilover Shocks

Up the ante in your truck with the style and performance of BDS Suspension Fox 2.5 Elite coilover lift kits. Designed to improve stance, performance, and capability, kits include everything necessary to set your truck up right with clearance for big tires. Fox 2.5 Elite coilovers include a Dual Speed Compression (DSC) adjuster that allows easy high-speed and low-speed compression tuning for optimal performance in any terrain. Each kit will also include Fox performance rear shocks available in different options, heavy-duty control arms for increased suspension travel, and other matched components to take your truck to the next level. Select the kit designed for your truck.

Not Yet Reviewed

$5,226.70

American Powertrain Tremec T-56 Magnum Manual Transmissions and Installation Kits

American Powertrain Tremec T-56 Magnum manual transmissions and installation kits are designed to withstand up to 700 lbs.-ft. of torque. Their gears feature substantially increased face widths and 2-piece laser-beam welded construction, allowing for greater control of the tooth angles, pitch, and alignment. The transmissions also include a bolstered one-piece countershaft to resist distortion, and a stronger input shaft. Magnum's new synchronizers are built with fine-tooth angles, redesigned shift forks—and an extensively modified transmission case to prevent leaks under high-stress conditions and increase overall power-handling capabilities. Nearly two dozen models are available; choose the kit recommended for your vehicle application. Kits include: * Cryo-hardened steel driveshaft slip yoke with 1330 style U-joint * Mechanical speedometer conversion * VSS wiring harness for electronic speedometer of EFI ECU * Reverse light wiring, weather seal harness, non-polar * Reverse lockout wiring harness * ISO-X ballistic, low-profile transmission mount * Steel roller pilot bearing * White shift knob with black 6-speed shift pattern

Not Yet Reviewed

$5,025.00

Valvetronic Designs Valved Sport Exhaust Systems

Valvetronic Designs offers Valved Sport exhaust systems for a wide range of BMWs from 2012 and up. This newest revision of the F chassis valved exhaust setup offers delivers improvements to aid in the ultimate sound experience. Utilizing new manufacturing techniques, these systems are truly a cut above the rest and are engineered to last. Built entirely by hand at the Valvetronic facility in Chambersburg, PA, the V2 F chassis exhaust features a new valve design to ensure optimal operation for the life of your system. In addition, hangers have been relocated and muffler internals revised to provide a more docile and refined experience when the valves are closed. Lastly, a new cast Y-pipe design helps aid in the goal of maximum exhaust flow and the most sonorous sound experience Sound Dynamics: The F chassis exhaust gives a very unique sound experience to the BMW F chassis platform. Allowing to instantaneously go from loud to the quiet mode when the system is operating with the valve opened, you get a very raw and deep sound characteristic. When closed the system retains stock-like sound levels. When operating with a valve opened you get very loud and aggressive pops and snaps on the overrun aggressive gear change sound—and overall, a raw engaging sound experience unparalleled by any other system on the market. The F chassis exhaust was designed from the ground up to be an uncompromising sound experience regardless of your situation. There is nothing else quite like it on the market. Features of the Valved Sport exhaust system: * Fully mandrel-bent for maximum flow * Precision TIG welds for high strength * Built from brushed T304 stainless steel * Sleeve-style exhaust tips for that perfect look * Electronic valves (rapid open and close function) * Exhaust valve integration into factory dynamic drive modes * Extension harness included, plugging factory exhaust valve controller in

Not Yet Reviewed

$5,999.00

QA1 Level 2 Full Vehicle Handling Suspension Kits

QA1's handling suspension kits provide a full-vehicle upgrade that fits your needs. Available in three different levels of performance, you can build your car in stages, using QA1's parts list as a road map to get to the level of performance you want and have peace of mind knowing you won't have compatibility issues. Greater control and improved cornering are key benefits of QA1 Level 2 handling suspension kits. They're designed to boost performance and include a more extensive assembly of components than Level 1 kits. They offer easy bolt-on installation and full compatibility with the OEM parts you attach them to. All QA1 handling suspension kits are available with or without shocks and struts—giving you the flexibility to obtain the shocks or struts and spring rates you desire. Select the kit designed for your vehicle.

5.0 out of 5 stars ( 12 )

$7,059.95

MagnaFlow xMOD Series Performance Exhaust Systems

MagnaFlow xMOD Series performance exhaust systems offer unrivaled exhaust performance! These revolutionary, fully modular exhaust systems will allow you to easily personalize and fine-tune to the power and sound you want. They also offer the benefits that MagnaFlow premium exhaust is known for—lifetime warrantied stainless steel construction and dyno-proven performance featuring straight-through mufflers and fast-flowing mandrel bent pipes. Together with the xMOD modules and deletes that provide configurable flow and sound levels, your vehicle's exhaust moves to the next level with support for your present—and future power needs. The power and sound is yours with MagnaFlow xMOD Series premium performance exhaust systems. MagnaFlow xMOD Series features: * xMOD muffler modules offer MagnaFlow's proven straight-through design and race-bred quick-release V-band clamps for quick installation and removal for when you want that race car sound, instead of the deep, aggressive signature MagnaFlow exhaust note * xMOD xTreme deletes are equipped with the same quick-release V-band clamps allowing for the removal of the muffler modules for that xTreme sound experience. Use of the xTreme deletes is recommended for track use only. * Opti-Flow modules feature a fast-flowing mandrel-bent stainless steel design optimized for stock power, plus minor modifications * xTreme Flow modules feature increased flow capacity mandrel-bent big bore design for big power modification support

5.0 out of 5 stars ( 1 )

$5,143.00

—

$5,459.00

QA1 Mopar Front Street Performance Coilover Conversion Systems

QA1 Mopar front street performance coilover conversion systems transform your classic Charger, Road Runner, or other classic B/E-body Mopar into a restomod that drives, corners, and launches like a modern machine. These Mopar systems feature great-looking powdercoated components that improve performance and save weight while making it easy to swap engines, including the Gen 3 Hemi. QA1 Mopar street performance systems are available with single or double adjustable shocks in kits offering 0 to 2 in. or 2 to 4 in. of drop. Features and benefits: * Coilovers help you achieve the perfect stance and ride quality * Single-adjustable shocks are recommended for cars used primarily on the street * Double-adjustable coilovers are recommended for consistent drag racing, autocross or road racing * Rack-and-pinion steering provides a modern feel and improved handling in any setting * Drastically improve geometry, enhancing driving feel and cornering capabilities * Designed for everyday driving, drag racing, and handling * Tubular design improves exhaust clearance while reducing weight * Works with multiple engine configurations

4.33 out of 5 stars ( 3 )

$5,363.95

—

$6,890.95

RideTech Subframes

Ridetech subframes deliver several key improvements over the original and some existing aftermarket subframes. Optimized suspension geometry, improved wheel and tire clearance, and rack and pinion steering technology, plus many more features will surely put Ridetech's subframes on the top of your builder's wish list. Select the kit with the preferred spindles. Features and benefits: * Optimized geometry provides improved roll center, Ackermann, camber gain, caster and bump steer * Lowers stance 1 to 3 in. and maintains factory track width while increasing wheel and tire clearance * 2 in. more tire clearance per side over stock subframe allows better turning radius with larger tires/wheels * Fits up to 6.5 in. BS with no modifications or reduction in turning radius * Rack and pinion steering upgrade provides improved steering feel, enhancing driver feedback * Modular design is compatible with coilovers or Shockwaves (sold separately) * Subframe features durable powdercoat finish for great, long-lasting good looks and corrosion resistance * Available with AFX pin or late model hub spindle design -- Hub spindle allows install of modern C5/C6 Corvette brakes and C5/C6/C7 hubs (hubs not included) -- Pin spindle is compatible with stock style brakes (including aftermarket kits that fit stock spindle) * One-piece billet 6061 T-6 aluminum upper control arms and steering arms add superior strength * Larger front sway bar controls body roll, improving weight transfer * Tubular lower control arms include eccentric adjustment for caster and camber adjustments * Alignment adjustments are made complete under the car --no adjustments inside engine bay * Multiple motor mount options * Included adjustable transmission crossmember compatible with most popular manual and automatic transmissions * Improved header clearance and exhaust routing allow for a variety exhaust solutions

Not Yet Reviewed

$6,495.00

—

$6,645.00

BluePrint Builder Series LS376/530HP Standard Edition EFI Crate Engine and 4L65/70E Trans Combos

BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a black pulley kit and 4L65/70E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * New Cast Iron 6.2L * Main caps are 6-bolt * One-piece rear main seal * Reluctor wheel – 58x * Cam sensor – 4x (in timing cover) * Knock sensor provision on side Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Ignition Timing * Firing order is 1-8-7-2-6-5-4-3 Assembled 4-speed Transmission Package: * Complete 4L65/70E package with electronic transmission controller * Torque converter with 2,200–2,400 rpm stall * Non-weighted flexplate * Starter Other Components: * Holley Terminator X Max Gen IV complete EFI engine management system, and DBW (Drive-By-Wire) pedal kit * DBW throttle body * GM Muscle-car Swap oil pan * Loaded intake manifold * Fuel injectors (EV6 type) and rail * Coil packs * Spark plugs and wires * Water pump * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys * Champion 3015 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91 octane. Recommended oil is BPP710.

4.0 out of 5 stars ( 1 )

$23,499.00

BluePrint Builder Series LS376/510HP Standard Edition EFI Crate Engine and TKX Transmission Combos

BluePrint Builder Series LS376/510HP Standard Edition EFI crate engine and TKX transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 510 horsepower, this standard edition builder series includes a polished pulley kit and T56 manual transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this engine assembly produces 440 lbs.-ft. of torque. When you need or want a new powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/510HP Standard Edition EFI crate engine and TKX trans combos. Product description and specifications: Block: * High strength cast iron (LSX Style) block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0662 in. Bore * 6-bolt main Rotating Assembly: * Nodular iron crankshaft * 3.622 in. stroke * 6.098 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Internally balanced front and rear Cylinder Heads: * BluePrint LS3 aluminum cylinder heads * 69cc chamber * 2.165 in. intake/1.590 in. exhaust valves * 259cc intake/102cc exhaust runners Cam Specs: * Hydraulic Roller Cam * 0.612 Intake/0.585 Exhaust Lift * 225 Intake/238 Exhaust duration * @.050-113 Degree Lobe Separation Ignition Timing: * Ignition Timing and Spark Advance are Controlled by BluePrint Engine Calibrated ECU * Transmission Controller Required if pairing to an automatic (ECU Does Not Offer Transmission Control) Other parts: * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS Swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and Fuel Rail Kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Notes: This engine requires a non-weighted flex plate such as (BPP12654640) / flywheel (BPPLS1611). Recommended fuel: 91 Octane. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The BluePrint Engines LS controller package contains a fully tested, calibrated, locked ECU, optimized for this specific engine. This package has undergone extensive testing for performance, reliability and the safety of you and your engine.

Not Yet Reviewed

$21,899.00

Holley Off-Road 2021-24 Ford Bronco 4-Door Performance Packages

Gear up for your next off-road adventure with complete Performance Package upgrades from Holley Off-Road. They deliver performance systems from exhaust to brakes, tuners, suspension, and more, and their products are engineered to work together, ensuring you have everything you need to have fun on and off the road. Your Bronco was born to run and with Holley Off-Road 2021-24 Ford Bronco performance packages for 4-door models, you'll have top-of-the-line performance parts working together seamlessly to elevate your driving experience. The ADS direct-fit adjustable reservoir race coilovers provide suspension adjustments needed for superior control and handling, the Big Claw performance rotors offer improved braking power, and the ADS heavy-duty sway bar end links, adjustable track bar, and tubular heavy-duty control arms provide added stability and durability, along with precise handling and strength in key suspension areas. Completing the packages is a Flowmaster Signature Series exhaust system, adding performance and an aggressive to moderate exhaust note, while a Pulsar XT tuner allows tuning adjustments to optimize engine performance. By buying everything together, you're not only enhancing multiple areas of your vehicle at once, but you're also ensuring that all the parts are compatible and working in harmony to elevate your driving experience. Features: * Flowmaster Signature Series: Brushed 304 stainless steel delivers incredible gains of 17 hp and 18 lb.-ft. at the rear wheels. TIG-welded and black chrome exhaust tips * Pulsar XT tuner adds: -- Up to 55 hp/69 torque at peak to 2.7L -- Up to 26 hp/69 torque at peak to 2.3L -- Up to 45 hp/77 torque at peak to 3.0L Raptor * Baer Big Claw brake rotors: Larger than stock rotor for increased brake torque and reduced stopping distance * ADS Racing coilovers: Large bore 2.5 in. shock body provides increased fluid capacity, resisting shock fade, resulting in increased performance for your off-road adventures * ADS adjustable heavy-duty sway bar end link: Improved durability, strength, and looks over factory sway bar end links and increased adjustability for lifted/long travel applications * ADS adjustable rear panhard bar: Keep your rear-end properly centered with this essential upgrade, where strength and adaptability converge for an unparalleled journey off the beaten path. * ADS front control arms: Corrects camber and caster, accommodating lifts up to 4 in. * ADS rear control arms: Adjustable and accommodates lifts up to 6 in.

Not Yet Reviewed

$10,031.95

Holley Off-Road 2021-24 Ford Bronco 2-Door Performance Packages

Gear up for your next off-road adventure with complete Performance Package upgrades from Holley Off-Road. They deliver performance systems from exhaust to brakes, tuners, suspension, and more, and their products are engineered to work together, ensuring you have everything you need to have fun on and off the road. Your Bronco was born to run and with Holley Off-Road 2021-24 Ford Bronco performance packages for 2-door models, you'll have top-of-the-line performance parts working together seamlessly to elevate your driving experience. The ADS direct-fit adjustable reservoir race coilovers provide suspension adjustments needed for superior control and handling, the Big Claw performance rotors offer improved braking power, and the ADS heavy-duty sway bar end links, adjustable track bar, and tubular heavy-duty control arms provide added stability and durability, along with precise handling and strength in key suspension areas. Completing the packages is a Flowmaster Signature Series exhaust system, adding performance and an aggressive to moderate exhaust note, while a Pulsar XT tuner allows tuning adjustments to optimize engine performance. By buying everything together, you're not only enhancing multiple areas of your vehicle at once, but you're also ensuring that all the parts are compatible and working in harmony to elevate your driving experience. Features: * Flowmaster Signature Series: Brushed 304 stainless steel delivers incredible gains of 17 hp and 18 lb.-ft. at the rear wheels. TIG-welded and black chrome exhaust tips * Pulsar XT tuner adds: -- Up to 55 hp/69 torque at peak to 2.7L -- Up to 26 hp/69 torque at peak to 2.3L -- Up to 45 hp/77 torque at peak to 3.0L Raptor * Baer Big Claw brake rotors: Larger than stock rotor for increased brake torque and reduced stopping distance * ADS Racing coilovers: Large bore 2.5 in. shock body provides increased fluid capacity, resisting shock fade, resulting in increased performance for your off-road adventures * ADS adjustable heavy-duty sway bar end link: Improved durability, strength, and looks over factory sway bar end links and increased adjustability for lifted/long travel applications * ADS adjustable rear panhard bar: Keep your rear-end properly centered with this essential upgrade, where strength and adaptability converge for an unparalleled journey off the beaten path. * ADS front control arms: Corrects camber and caster, accommodating lifts up to 4 in. * ADS rear control arms: Adjustable and accommodates lifts up to 6 in.

Not Yet Reviewed

$10,031.95

Holley Off-Road 2019-2024 Ram 1500 Performance Packages

Holley Off-Road has been working hard to bring innovation and incredible products to your Ram 1500 platform. These Performance Packages by Holley are a comprehensive performance upgrade kit tailored for 2019-2024 Ram 1500 pickups. The suspension upgrades feature ADS Racing Shocks Mesa 2.5 Series shocks, which are larger than stock, providing increased fluid capacity to prevent shock fade and deliver exceptional off-road durability combined with commuter comfort. The kit also includes a Flowmaster Signature Series exhaust system, known for its hand-welded 304 stainless steel construction and balanced sound profile, offering an aggressive yet moderate tone. Additionally, each package is equipped with a tuner suited for each model year, including DiabloSport PredatorX, Intune 3, and DFM Module + Amp'd Throttle Boost Kit, all of which provide pre-loaded tunes and customization options for optimal performance. Finally, Big Claw Performance rotors are included, designed for improved braking performance and enhanced cooling to ensuring safety and reliability during high-performance driving. Gear up your 2019-24 Ram 1500 pickup for your next off-road adventure with one of these complete Performance Package upgrades from Holley Off-Road.

Not Yet Reviewed

$5,194.95

Holley Off-Road 2025+ Ram 1500 Performance Packages

Holley Off-Road has been working hard to bring innovation and incredible products to your Ram 1500 platform. These Performance Packages by Holley are a comprehensive performance upgrade kit tailored for 2025+ Ram 1500 pickups. The suspension upgrades feature ADS Racing Shocks Mesa 2.5 Series shocks, which are larger than stock, providing increased fluid capacity to prevent shock fade and deliver exceptional off-road durability combined with commuter comfort. The kit also includes a Flowmaster Signature Series exhaust system, known for its hand-welded 304 stainless steel construction and balanced sound profile, offering an aggressive yet moderate tone. Additionally, each package is equipped with a tuner suited for each model year, including DiabloSport PredatorX, Intune 3, and DFM Module + Amp'd Throttle Boost Kit, all of which provide pre-loaded tunes and customization options for optimal performance. Finally, Big Claw Performance rotors are included, designed for improved braking performance and enhanced cooling to ensuring safety and reliability during high-performance driving. Gear up your 2025+ Ram 1500 pickup for your next off-road adventure with one of these complete Performance Package upgrades from Holley Off-Road.

Not Yet Reviewed

$6,020.95

Speedtech Performance USA Pro Touring 1967-69 F-Body Complete Front Subframes

Speedtech Performance USA Pro Touring 1967-69 F-body complete front subframes are designed as bolt-in packages that will elevate your first generation F-body to an entirely new level of performance. They include a specially matched, high-clearance tubular control arm front suspension; double-adjustable coilover shocks; and power steering rack and pinion for the optimum in handling performance and daily drivability. These suspension packages are available for a variety of classic muscle cars from the 1960s. Additional features: * Strong box-type, laser-cut and JIG-welded construction * Reduced weight over factory frames * Factory-alignment holes offer ease of aligning frame to body * Guldstrand mod geometry already built-in * Upper control arm mounts feature additional camber curve adjustability * Increased header and exhaust clearance * Fully adjustable rear crossmember fits all GM transmissions, as well as T-56 and TKO * Built-in tow/tie-down hooks eliminate strapping around painted frames * Accepts most aftermarket suspension components which fit a factory frame--and that clear coilover shocks * Heat-treated tubular 1 1/4 in. sway bar kit * Power rack and pinion unit with steering arms * QA1 double adjustable coilover shocks with thrust washers and adjusting wrench included; allows for 2 1/2 in. of ride height adjustment * Mounting hardware, instructions, and custom alignment specs

5.0 out of 5 stars ( 1 )

$7,211.36

—

$7,452.00

BluePrint Builder Series 383/436HP Standard Edition EFI Crate Engine and 700R4 Transmission Combos

BluePrint Builder Series 383/436HP Standard Edition EFI crate engine and 700R4 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy small block-compatible 383 (c.i.d.) engine that produces 436 horsepower, this standard edition builder series includes a polished pulley kit and 700R4 automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.0:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and steel crankshaft. Altogether, this assembly produces 443 lbs.-ft. of torque. When you need or want a new powertrain for your GM ride, go with the authority in crate engines and their BluePrint Builder Series 383/436HP Standard Edition EFI crate engine and 700R4 transmission combos. Other product features, items, and specifications include: Block: * New BluePrint cast iron * Bore is 4.000 in. * Main caps are 4-bolt * One-piece rear main seal Rotating Assembly: * Cast steel crankshaft * Stroke – 3.750 in. * OEM-style 5.700 in. connecting rods * Hypereutectic pistons * Weighted 8 in. harmonic balancer (BPP400L) Cylinder Heads: * BluePrint H8002K performance models (0.500 in. raised port vs. OEM) * Chamber – 64cc * Valves are 2.020 in. intake and 1.600 in. exhaust * Exhaust runners are 195cc intake and 75cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.544 in. * Exhaust valve lift – 0.555 in. * Intake duration at 0.050 in. of lift – 230 * Exhaust duration at 0.050 in. of lift - 236 * Lobe separation angle (LSA) – 110 degrees Ignition Timing * Initial is 10-16 degrees * Total is 32-34 degrees * Firing order is 1-8-4-3-6-5-7-2 Automatic Transmission Package: * Complete 700R4 package * Torque converter with 2,200 – 2,400 rpm stall * Weighted flexplate (one-piece, RMS) * Starter * Due to numerous tire/rear gear combinations, this transmission does not ship with a speedometer gear or sender housing Other Components: * Dual plane aluminum intake manifold with satin finish * Complete EFI system with pump kit * Spark plugs and wires (with separators) * Valve covers, oil pan, and timing cover * Oil filter * Front accessory drive with polished finish (includes A/C and power steering) * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) * Thermostat and housing Note: Factory 5 applications require a special order (please call). Recommended fuel is 91 octane. Recommended oil is BPP710. Not designed for EGR compatibility.

Not Yet Reviewed

$18,599.00

BluePrint Engines Pro Series Chevy 502 C.I.D. 627 HP Dressed Long Block Crate Engines

Blueprint Pro Series is for those wanting maximum horsepower and durability. BluePrint Engines Pro Series Chevy 502 c.i.d. 627 hp dressed long block crate engines offer any custom builder, hot rodder, or kit car builder an engine that has been fully dyno tested, passed vigorous inspections, and is ready to power up your project. Blueprint's Pro Series 502 big block GM-style engines are dressed with carburetor, aluminum heads, forged pistons, forged crankshaft, and a hydraulic roller cam. Additional features: * Standard deck with 4-bolt main * Forged H-beam connecting rods * Cylinder head specs: -- 119cc chamber -- 2.30 in. intake / 1.88 in. exhaust valves -- 316cc intake / 124cc exhaust runners * Camshaft specs: -- .647 intake / .647 exhaust -- 248 intake / 254 exhaust duration -- at .050 - 112 degree lobe separation * Dyno test results shipped with engine

4.5 out of 5 stars ( 2 )

$12,399.00

BluePrint Builder Series 632/815HP Standard Edition EFI Crate Engine and 4L80E Transmission Combos

BluePrint Builder Series 632/815HP Standard Edition EFI crate engine and 4L80E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy big block-compatible 632 (c.i.d.) engine that produces 815 horsepower, this standard edition builder Pro Series includes a polished pulley kit and 4L80E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 775 lbs.-ft. of torque. When you need or want a new powertrain for your GM ride, go with the authority in crate engines and their BluePrint Builder Series 632/815HP Standard Edition EFI crate engine and 4L80E transmission combos. Other product features, items, and specifications include: Block: * New BluePrint cast iron * Bore is 4.600 in. * Main caps are 4-bolt * One-piece rear main seal * Mechanical fuel pump provision * Tall deck (approximately 0.400 in. taller and wider than OEM block) Rotating Assembly: * New BluePrint forged crankshaft * Stroke – 4.750 in. * Forged H-beam 6.635 in. connecting rods * Forged pistons * Internal balance * Non-weighted harmonic balancer Aluminum Cylinder Heads: * BluePrint PS8012 performance models (0.300 in. raised exhaust port vs. OEM) * Chamber – 119cc * Valves are 2.300 in. intake and 1.880 in. exhaust * Exhaust runners are 358cc intake and 125cc exhaust * Builder must verify clearance of exhaust, shift linkage, steering components, etc. before ordering Camshaft: * Hydraulic roller * Intake valve lift – 0.698 in. * Exhaust valve lift – 0.698 in. * Intake duration at 0.050 in. of lift – 272 * Exhaust duration at 0.050 in. of lift - 282 * Lobe separation angle (LSA) – 110 degrees Ignition Timing * Initial is 10-16 degrees (16-20 degrees for Dominator-style carburetors) * Total is 32-34 degrees (by 2,500 rpm for Dominator-style carburetors) * Firing order is 1-8-4-3-6-5-7-2 Automatic Transmission Package: * Complete 4L80E package with electronic controller (lockup capability) * Torque converter with 3,800–4,200 rpm stall * Non-weighted flexplate * Starter * Gear ratios are 2.482:1 (first), 1.482:1 (second), 1.000:1 (third), 0.750:1 (fourth), 2.077:1 (reverse) Other Components: * Single plane aluminum intake manifold with satin finish * Complete EFI system with Aeromotive A1000 fuel pump * Valve covers, oil pan, and timing cover * Pro Billet distributor * Front accessory drive with polished finish (includes alternator, A/C, power steering, water pump, pulleys, and belts) * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) * Thermostat and housing Note: Recommended fuel is 91 octane. Recommended oil is BPP710. Not designed for EGR-compatibility.

Not Yet Reviewed

$30,999.00

QA1 Mopar Front Drag Coilover Conversion Systems

QA1 Mopar front drag coilover conversion systems transform your classic Charger, Road Runner, or other classic B/E-body Mopar into a restomod that drives, corners, and launches like a modern machine. These Mopar systems feature great-looking powdercoated components that improve performance and save weight while making it easy to swap engines, including the Gen 3 Hemi. Features and benefits: * Coilovers help you achieve the perfect stance and ride quality * Rack-and-pinion steering provides a modern feel and improved handling in any setting * Drastically improve geometry, enhancing driving feel and cornering capabilities * Designed for everyday driving, drag racing, and handling * Tubular design improves exhaust clearance while reducing weight * Works with multiple engine configurations * Add the optional sway bar (not included) to further enhance performance and cornering capabilities.

Not Yet Reviewed

$5,581.95

—

$6,760.95

BluePrint Engines Pro Series Mopar 426 C.I.D. 610 HP EFI Deluxe Dressed Long Block Crate Engines

BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 610 hp and 525 lbs.-ft. of torque. The engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW OEM Hellcat engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crankshaft 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Holley Terminator engine harness Fuel injection Throttle body Harmonic balancer Fabricated intake Manifold Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Fuel Injected -- Spark Plug: NGK 97408/ LZTR6AP11EG -- Spark Plug Gap: .043 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Fabricated Aluminum Gen III HEMI -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2

Not Yet Reviewed

$19,399.00

—

$19,499.00

55 Results Found For "exhaust kit"