Free Shipping on Orders Over $109 at Summit Racing

Summit Racing™ Automatic Transmissions

Summit Racing™ Automatic Transmissions combine quality and economy to offer replacement transmissions in many styles and options. These units are remanufactured with all-new clutches, thrust washers, seals, bushings, and high-energy bands, along with other "failure prone" hard parts depending on unit. Other features include a rebuilt front pump, a valve body with shift for street and performance and high-quality seals and gaskets. You get all these impressive upgrades, along with reliable performance and extreme value. All transmissions are Dyno tested before they're shipped. Order the model recommended for your vehicle.

3.46 out of 5 stars ( 63 )

$5,455.99

—

$6,190.99

Edelbrock LS Bare Race Blocks

Edelbrock LS bare race blocks are designed to meet the needs of today's high performance engine builders and racing enthusiasts. They are available in standard and tall deck height combinations and are engineered for maximum clearance around a 4.600 in. stroke crankshaft. With their unique design, Edelbrock engineers were able to minimize windage in the rotating assembly, leading to superior engine lubrication at higher rpm. To make them friendly for existing race applications, these blocks contain both factory and motor plate race mounts for Gen I, II, III, and IV engines. Each LS bare race block receives a CT scan to ensure maximum performance and consistency. Standard features include: * Designed from aircraft-quality A357 T-6 aluminum * Siamese cast bore walls (4.125 in. or 4.165 in. diameter) with press-in cast iron sleeves * Machined with 55mm cam bearing journal * Available in standard (9.240 in.) and tall (9.750 in.) deck heights with beefy deck thicknesses (.500 in. standard/.750 in. tall deck); standard (5.87 in.) and tall (6.38 in.) deck cylinder sleeves are available * 6-head bolt design with full water jacket around cylinder walls; large windows in the valley allow access to an inboard 6th head bolt * Block design includes large front and rear -12AN side feeds for serious dry sump setups * Material for oversized lifters with lifter bosses are designed to clear tie bar-style lifters

Not Yet Reviewed

$6,904.95

ATK High Performance Chevy 540 Dart Race Series Short Blocks

Big power requires a solid foundation, so start your next build with one of these ATK High Performance Chevy 540 Dart Race Series short blocks. These short blocks are built, balanced, and blueprinted to be the strongest and most reliable short blocks available for your race car or hardcore street car. Features: * Dart Big M 9.8 block * Aligned and honed main bores * 4340 forged crankshaft * 4.25 in. stroke * 4340 forged H-beam connecting rods * Forged -10cc dome pistons

Not Yet Reviewed

$7,626.99

QA1 Level 2 Full Vehicle Drag Racing Suspension Kits

Looking for a better launch, straight-line stability, and consistent performance? Turn to QA1's drag racing suspension kits for a full-vehicle upgrade that fits your needs. Available in three different levels of performance, these drag racing kits offer easy, bolt-in installation (some welding may be needed) and seamlessly works with whatever OE component each piece attaches to. And with different levels, you can build your car in stages, using QA1's parts list as a road map to get to the level of performance you want and have peace of mind knowing you won't have compatibility issues. QA1 Level 2 drag racing kits are ideal for owners looking for serious performance gains at the track. They deliver everything needed in one shot, taking the guesswork out of the process, so you can skip the research and focus on preparing for your next race. Select the kit designed for your drag race car.

Not Yet Reviewed

$5,017.95

—

$8,620.95

On Sale

Summit Racing™ 1972-93 Dodge Truck Mopar 426 C.I.D. 610 HP EFI Engine Swap Pro Packs

Our Summit Racing™ 1972-93 Dodge truck Mopar EFI engine swap Pro Packs deliver engineered swap systems that eliminate the guesswork and doubt, while saving you the time trying to match up universal parts. We've brought together Hooker, Lakewood, and BluePrint engines, creating a package of power and performance for your truck. Each Pro Pack contains Hooker BlackHeart engine mount brackets, transmission crossmember, polyurethane transmission mounts, and 304 stainless steel Gen III Hemi swap mid-length headers, along with Lakewood engine mounts. A BluePrint Chrysler Hemi-compatible 426 c.i.d. ProSeries fuel-injected engine, base dressed or deluxe dressed, completes the package. Select the Summit™ engine swap Pro Pack desired for your Dodge truck. Notes: * Base dressed ProSeries engine includes water pump * Deluxe dressed ProSeries engine includes spark plugs and front accessory drive with water pump, alternator, power steering pump, and A/C compressor available with black or polished pulleys Engine specs: * 610 hp/525 lb.-ft. torque * Compression ratio: 10.48:1 Block: * New "BGE" Hellcat engine block * 4-bolt main * 4.090 in. bore * One-piece rear main seal Rotating Assembly: * Forged steel crank * 4.050 in. stroke * 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * Gen III Hemi Apache aluminum cylinder heads * 73cc chamber * 2.140 in. intake/1.650 in. exhaust valves Camshaft specs: * Hydraulic roller cam * .610 intake/.611 exhaust lift * .614 intake/.614 exhaust lift (base dressed) * 231 intake/255 exhaust duration at .050 in. * 113-degree LSA * 115-degree LSA (base dressed) Ignition timing: Controlled by ECU Also included with engine: * Fuel injection * Throttle body * Fabricated intake manifold * Harmonic balancer * Muscle car-style mid-sump swap oil pan * Coil(s) * Timing cover (Car) * Valve covers * Holley Terminator ECU controller kit and wiring harness

Not Yet Reviewed

$18,117.79

$18,094.26

On Sale

Summit Racing™ 1966-72 Mopar B-Body 426 C.I.D. 610 HP EFI Engine Swap Pro Packs

Our Summit Racing™ 1966-72 Mopar B-Body EFI engine swap Pro Packs deliver engineered swap systems that eliminate the guesswork and doubt, while saving you the time you would have spent trying to match up universal parts. We've brought together Hooker, Lakewood, and BluePrint engines, creating a package of power and performance for your vehicle. Each Pro Pack contains Hooker BlackHeart engine mount brackets, transmission crossmember, and polyurethane transmission mounts, along with Lakewood engine mounts. A Chrysler Hemi-compatible 426 c.i.d. ProSeries fuel-injected engine, base dressed or deluxe dressed, completes the package. Select the Summit™ engine swap Pro Pack desired for your Mopar B-Body. Notes: * Base dressed ProSeries engine includes water pump * Deluxe dressed ProSeries engine includes spark plugs and front accessory drive with water pump, alternator, power steering pump, and A/C compressor with either black or polished pulleys Engine specs: * 610 hp/525 lb.-ft. torque * Compression ratio: 10.48:1 Block: * New "BGE" Hellcat engine block * 4-bolt main * 4.090 in. bore * One-piece rear main seal Rotating Assembly: * Forged steel crank * 4.050 in. stroke * 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * Gen III Hemi Apache aluminum cylinder heads * 73cc chamber * 2.140 in. intake/1.650 in. exhaust valves Cam specs: * Hydraulic roller cam * .610 intake/.611 exhaust lift * .614 intake/.614 exhaust lift (base dressed) * 231 intake/255 exhaust duration at .050 in. * 113-degree LSA * 115-degree LSA (base dressed) Ignition timing: Controlled by ECU Also included with engine: * Fuel injection * Throttle body * Fabricated intake manifold * Harmonic balancer * Muscle car-style mid-sump swap oil pan * Coil(s) * Timing cover (Car) * Valve covers * Holley Terminator ECU controller kit and wiring harness

Not Yet Reviewed

$18,028.92

$17,978.19

QA1 Level 3 Full Vehicle Drag Racing Suspension Kits

QA1 Level 3 Drag Racing suspension kits furnish your vehicle with the ability for a better launch, straight-line stability, and consistent performance. These kits utilize high-quality parts engineered together as a system to take the guesswork out of choosing the right pieces to support your performance goals. Many feature QA1's MOD Series front drag suspension kit or MOD Series front or front and rear Pro Coil system matched with Drag Race control arms and additional components to equip your vehicle with race-winning performance. Choose the kit designed for your vehicle.

Not Yet Reviewed

$6,380.95

—

$10,850.95

On Sale

Summit Racing™ 1973-76 Mopar A-Body 426 C.I.D. 610 HP EFI Engine Swap Pro Packs

Our Summit Racing™ 1973-76 Mopar A-Body EFI engine swap Pro Packs deliver engineered swap systems that eliminate the guesswork and doubt, while saving you the time you would have spent trying to match up universal parts. We've brought together Hooker components and BluePrint engines, creating a package of power and performance for your vehicle. Each Pro Pack contains Hooker BlackHeart engine mount brackets, transmission crossmember, polyurethane transmission mounts, and 304 stainless steel Mopar A-Body Gen III Hemi swap headers. A Chrysler Hemi-compatible 426 c.i.d. ProSeries fuel-injected engine, base dressed or deluxe dressed, completes the package. Select the Summit™ engine swap Pro Pack desired for your A-Body. Notes: * Base dressed ProSeries engine includes water pump * Deluxe dressed ProSeries engine includes spark plugs and front accessory drive with water pump, alternator, power steering pump, and A/C compressor with either black or polished pulleys Engine specs: * 610 hp/525 lb.-ft. torque * Compression ratio: 10.48:1 Block: * New "BGE" Hellcat engine block * 4-bolt main * 4.090 in. bore * One-piece rear main seal Rotating Assembly: * Forged steel crank * 4.050 in. stroke * 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * Gen III Hemi Apache aluminum cylinder heads * 73cc chamber * 2.140 in. intake/1.650 in. exhaust valves Cam specs: * Hydraulic roller cam * .610 intake/.611 exhaust lift * .614 intake/.614 exhaust lift (base dressed) * 231 intake/255 exhaust duration at .050 in. * 113-degree LSA * 115-degree LSA (base dressed) Ignition timing: Controlled by ECU Also included with engine: * Fuel injection * Throttle body * Fabricated intake manifold * Harmonic balancer * Muscle car-style mid-sump swap oil pan * Coil(s) * Timing cover (Car) * Valve covers * Holley Terminator ECU controller kit and wiring harness

Not Yet Reviewed

$18,875.14

$18,870.71

Bell Racing HP77 High Performance Series Helmets

Bell Racing HP77 High Performance Series helmets are based on Bell's highly successful and multiple F1 World Champion-proven HP7 design. Chosen by most top professional open cockpit racers, the HP77 provides advanced protection, featuring a very narrow eye port on top of which high-strength ballistic materials have been incorporated. Following a long tradition of innovation, the HP77s were the first helmets to meet the latest FIA8860-2018-ABP standard, the most rigorous sport helmet standard on the planet designed for professional Formula racers competing at the highest levels of the sport. Bell's HP77 High Performance helmets are known for their lightweight, aerodynamic qualities, superior cooling, and amazing defogging system that meets the intense demands of open cockpit racing in all types of weather. Available in several sizes, select your ideal fit. Features: * Full face helmet featuring high-strength and high-modulus carbon fibers creating an ultra-lightweight FIA8860-2018 ABP shell * Very narrow eye port * Frontal area with integrated ballistic materials for added protection from flying debris * Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance * Optical grade injected Double Screen Anti-Fog (DSAF) shield for anti-fog control and superior visibility * Powerful and effective top and chin bar ventilation system with 12 air intake and extraction channels for maximum ventilation * Air intake system includes 2-part center and low profile on sides (installed) * Shell and shield design optimized to improve aerodynamic performance, reduce internal noise, and enhance energy management capacities * Integrated channels in face piece offering multiple options to install drink tube and communication systems * Factory installed Hans anchors as original equipment * Synthetic rubber gasket seal to prevent dirt and water from entering the helmet * HP helmet bag included * Shield and pivot kit

Not Yet Reviewed

$5,599.95

Intercomp Racing Scale Setup Racks

Consistent scaling will gain you accurate chassis setups for first-rate handling. Intercomp Racing scale setup racks are strong, adjustable billet drive-on setups that will make your life a lot easier when scaling your race car. Manufactured from 6061-T6 billet aluminum, these scale setup racks are available in three models to best suit your needs, and setup is fast and easy. All professional-grade Intercomp setup racks include two pontoons, adjustable bridges, up-ramps, 18 in. front roll-offs, and 26 adjustable steel leveling feet for increased stability. Intercomp setup racks are track width and wheelbase-adjustable to get just the right fit for your car and precise readings. Measure up--race with Intercomp Racing adjustable billet drive-on scale setup racks.

Not Yet Reviewed

$6,495.00

ADS Race Bypass Shocks

ADS external race bypass shock options are designed around racing first and foremost. Performance, reliability, and longevity are primary concerns when determining flow rates and zone placement. Multiple zones allow end users to dial in the damping curve to driver and chassis type. Enhanced flow in critical areas reduces heat buildup and harshness; these reductions in restriction amplify traction potential and driver control. Large capacity reservoirs aid in cooling as well as reducing pressure gain in the system. Large diameter shafts increase strength for extreme applications and stand up to the abuse of racing time and time again. All these features together deliver a bulletproof bypass shock that is guaranteed to perform on your race car or weekend warrior. Options include: * 3, 4, or 5 tubes * Style 1 or 2 * Remote or piggyback reservoir * Dozens of extended/collapsed length options * 8 in. to 18 in. stroke options

Not Yet Reviewed

$5,449.95

Chevrolet Performance Bowtie Sportsman Race Blocks

These are the blocks to buy if you want to build a serious street car or if you want to head to the race track! Chevrolet Performance Bowtie Sportsman blocks have been the starting point for countless racing engines. These iron blocks are available in a variety of finish options to build almost any engine combination. Most of these blocks have siamesed cylinder walls and 4-bolt main caps that are secured by Grade 8 bolts. All blocks in this family have a 9.025 in. deck height. The Bowtie Sportsman blocks are a great foundation for your serious street car, circle track, or drag car that makes between 350 and 500 hp.

Not Yet Reviewed

$5,275.24

Alcon Brake Kits

Alcon offers brake kits for a wide range of vehicles, including many Ford, Chevrolet, Ram, and GMC trucks from 2017 and up. These replacements are manufactured from factory-style materials in accordance with OE specifications to ensure proper fit and long-lasting performance. Depending on the front or rear kit you select, components may include a vented rotor with slotted surface, cast iron caliper, and brake pads. The brake parts are available in a variety of diameters, thicknesses, and bolt patterns.

Not Yet Reviewed

$12,324.04

Chevrolet Performance ZZ632/1000 Deluxe Long Block Crate Engines

Chevrolet Performance's ZZ632/1000 deluxe long block crate engines are their biggest and baddest big blocks! They start with a tall deck Sportsman Bowtie block and an all-forged roller assembly, then add a hydraulic roller camshaft and high-flow spread-port CNC-machined cylinder heads derived from Pro Stock racing technology. The RS-X design cylinder heads feature symmetrical ports to produce similar power from all eight cylinders. ZZ632 crate engines have a crank-trigger ignition system with coil-near-plug ignition coils mounted on a unique valley plate. Included is a pre-programmed, self-learning control system for precise fuel control and amazing output on premium pump gas. These big block engines reach peak power at 6,600 rpm and rev to a recommended maximum of 7,000 rpm. Technical specs: * Bore and stroke: 4.600 in. by 4.750 in. * Power is 1,004 hp at 6,600 rpm * Torque is 876 lbs.-ft. at 5,600 rpm * Cast iron block with 4-bolt mains * Forged 4340 steel crankshaft * Forged steel H-beam connecting rods * Forged aluminum 2618 alloy pistons * Aluminum high-rise single-plane intake manifold * Dominator 4500-style throttle body * 86 lb.-hr. fuel injectors * Billet steel hydraulic roller camshaft * Valve lift of 0.780 in. intake and 0.782 in. exhaust * Camshaft duration at 0.050 in. is 270 intake and 287 exhaust * Aluminum RS-X symmetrical spread-port cylinder heads with 70cc chambers * Titanium 2.450 in. intake/1.800 in. exhaust valves with a 5/16 in. stem * 58X reluctor crank-triggered, coil-near-plug ignition * Compression ratio of 12.0:1 * Forged aluminum shaft-mount roller rocker arms with 1.8:1 ratio * Aluminum water pump * Steel 8-quart oil pan * Recommended fuel: 93 octane or higher

5.0 out of 5 stars ( 2 )

$32,935.35

QA1 Mopar Front Street Performance Coilover Conversion Systems

QA1 Mopar front street performance coilover conversion systems transform your classic Charger, Road Runner, or other classic B/E-body Mopar into a restomod that drives, corners, and launches like a modern machine. These Mopar systems feature great-looking powdercoated components that improve performance and save weight while making it easy to swap engines, including the Gen 3 Hemi. QA1 Mopar street performance systems are available with single or double adjustable shocks in kits offering 0 to 2 in. or 2 to 4 in. of drop. Features and benefits: * Coilovers help you achieve the perfect stance and ride quality * Single-adjustable shocks are recommended for cars used primarily on the street * Double-adjustable coilovers are recommended for consistent drag racing, autocross or road racing * Rack-and-pinion steering provides a modern feel and improved handling in any setting * Drastically improve geometry, enhancing driving feel and cornering capabilities * Designed for everyday driving, drag racing, and handling * Tubular design improves exhaust clearance while reducing weight * Works with multiple engine configurations

4.33 out of 5 stars ( 3 )

$5,363.95

—

$6,890.95

QA1 Level 2 Big Wheel Kits

Build your project exactly how you want with QA1 Level 2 Big Wheel kits! Get the perfect look by easily adjusting your ride height with front and rear coilovers. Raise or lower your car 2 in. the front. Raise it up to 2 in. or lower it by up to 3 in. in the rear. QA1 Level 2 Big Wheel kits allow you to dial-in the exact style you want in minutes with the included spanner wrench. These complete bolt-on suspension kits are designed to fit up to 28 in. wheels on your vehicle and include everything needed to get your Box sitting right, while giving you a better ride and improved handling. Product features and benefits: * Double-adjustable coilovers give you the ability to individually tune your shock compression and rebound to get the perfect ride and get more grip off the line for drag racing * Adjustable upper and lower trailing arms allow your wheel and tire package to fit with adjustable trailing arms that center your rear axle in the wheel well to gain more clearance for up to 28 in. wheels * Tubular control arms are much lighter and stronger than stock and will upgrade front-end geometry for better drivability—and are designed specifically for big wheel cars with corrected suspension angles for large wheels and tires * Tubular sway bars help reduce body roll and improve stability with front and rear sway bars to reduce handling issues that come from big wheels and raised ride heights * Easy, bolt-in installation * Parts come powdercoated and ready-to-install with all necessary hardware to allow you to bolt up the kit right in your garage or work with your local shop * Works with original factory rear axle housings or Quick Performance 9 in. rear axle housings

5.0 out of 5 stars ( 2 )

$5,439.95

—

$5,715.95

Chevrolet Performance LSX376 Crate Engines

You're track-ready with extreme performance GM LSX376 crate engines. At home on the street and on the strip, these value-driven Chevrolet Performance crate engines offer lower-compression forged aluminum pistons, a tough bottom end, and high-flow heads. LSX376 engines make a perfect foundation for supercharging, turbocharging, and nitrous--all you need to do is supply the boost! Does your muscle deserve the LSX touch? Yes! Get the strength and power to build a winner with these features: * Race-bred LSX Bowtie block * High-flow LS3 cylinder heads * Blower-friendly 9.0:1 forged pistons * 14 in. automatic transmission flexplate * Unique LSX376 valve covers

Not Yet Reviewed

$13,568.04

Ford Performance Parts 5.0L Coyote Gen 4 Aluminator SC Crate Engines

Built for high performance applications, the Ford Performance 5.0L Coyote Gen 4 Aluminator SC crate engines are a powerhouse—ideal for custom race builds and 2024 GT Mustangs. While the Aluminator block, cylinder heads, oil pan, and intake manifold are factory pieces, Ford Performance replaces the hypereutectic pistons and sintered-steel rods with Mahle forged slugs, ARP 2000 rod bolts, and Manley forged H-beam rods, keeping the factory 12.0:1 compression ratio in naturally aspirated form and 9.5:1 on its boost-ready Aluminator crate. These flagship crates are quite popular with Ford diehards in the custom car and street rod world—because who really wants to put a Chevy LS in a deuce coupe? Crate engine features and specs: * Fits 2024+ Mustang GT * 5.0L (302 cubic inches) * 9.5:1 compression ratio (nominal) * Mahle hard anodized forged pistons with Grafal low friction coating * Manley H-beam connecting rods with ARP 2000 bolts * Forged steel crankshaft * Uses production 2024 Mustang GT aluminum block * 2024+ Production oil pan * Tuned composite Mustang GT intake manifold with production dual drive-by-wire 80mm throttle bodies with variable runner control * Four-valve-per-cylinder aluminum heads with roller-finger followers reduce friction. * Mustang GT production camshafts * Includes Ford Performance colder, heat range zero spark plugs (M-12405-M50A) * Includes Ford Performance oil filter (M-6731-FL820) * Includes billet steel gerotor oil pump gears (M-6600-M50A) * Vehicle harness and PCM not included * Does not include alternator (for alternator kit: refer to part numbers M-8600-M50BALT or M-8600-M50ALTA) * Engine mount bosses and bell housing mount pattern common to 4.6L modular engines * Does not include exhaust manifolds

Not Yet Reviewed

$15,262.99

Ford Performance Parts 302 C.I.D. 340 HP Boss Long Block Crate Engines

Ford Performance Parts 302 c.i.d. 340 hp Boss long block crate engines feature Ford's X2 cylinder heads packaged with the legendary "E" camshaft for use with automatic or manual transmissions. Utilizing forged internals, the X2302E long blocks deliver excellent value and are solid foundations for any performance combination, including forced induction. These crate engines feature race-quality components at competitive pricing. Features and specs for these Ford Boss long block crate engines include: * 302 cu. in. * 340 hp * 9.0:1 compression ratio (nominal) * Forged pistons * Forged steel connecting rods * BOSS 4-bolt main block * Hydraulic roller camshaft, .498 in. lift intake and exhaust, duration at .050 in. is 220 degrees intake and exhaust * Double roller timing chain set * Forged steel crankshaft * Can be used in kit cars, street rods, Mustangs, Fox-bodied cars, and trucks (rear sump pan fits most Fox body cars) * Ford Performance aluminum X2 cylinder heads * Roller rocker arms * Rear sump oil pan and pickup, standard rotation timing cover, reverse rotation water pump, and non-EFI valve covers * Fuel pump eccentric installed * Built with all new parts

2.0 out of 5 stars ( 1 )

$9,849.99

BluePrint Engines GM 383 C.I.D. Stroker Short Block Plus Engines

BluePrint Engines GM 383 c.i.d. short block plus stroker engines are always balanced and ready for you to finish assemble. Whether you're building a kit car, race car, hot rod, or just a sweet old memory, BluePrint Engines are ready to add a lot of muscle to your fun! Block details: * 4-bolt main * Passenger side dipstick * Cylinder wall thickness "sonic-tested" * Cylinders computer-honed to tolerance of .0002 in. Rotating assembly details: * Crankshaft * Pistons * Connecting rods * Moly rings * High-volume oil pump * Heavy-duty single roller timing set * Harmonic balancer * Hydraulic roller camshaft and lifters * Oil pan * Brass freeze plugs

4.56 out of 5 stars ( 9 )

$5,999.00

GearStar GM 4L80E Level 3 Transmissions

GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L80E Level 3 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 600 hp * Up to 600 lb.-ft. of torque * Stall: 2,600 to 3,600 * Custom-built 10 in. billet racing lock-up converter * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * TransGo reprogramming kit * Filter * Torrington bearing kit * Bushing kit * Thrust washer kit * Internal wiring harness * New manifold pressure switch * New EPC solenoid * New PWM solenoid * New input and output speed sensors * New 1-2 and 3-4 shift solenoids * Expanded capacity forward clutch drum * Extra-capacity 2nd gear clutch assembly * Expanded capacity 3rd clutch drum * Heat-treated input and main shafts * Heat-treated forward steel clutch hub * Updated molded steel direct clutch piston * Updated reverse band * New low roller assembly * Wide kickdown band with new apply piston * Heavy-duty intermediate sprag * Updated boost valve * Updated TCC regulator valve * Blue printed pump and valve body * Transmission mount * New OEM steel pan

Not Yet Reviewed

$6,845.00

GearStar GM 4L80E Level 4 Transmissions

GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L80E Level 4 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 800 hp * Up to 700 lb.-ft. of torque * Stall: 2,800 to 3,400 * Custom-built, custom-stalled 10 in. billet racing lock-up converter * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * TransGo reprogramming kit * Filter * Torrington bearing kit * Bushing kit * Thrust washer kit * Internal wiring harness * New manifold pressure switch * New EPC solenoid * New PWM solenoid * New input and output speed sensors * New 1-2 and 3-4 shift solenoids * Expanded capacity forward clutch drum * Extra-capacity 2nd gear clutch assembly * Expanded capacity 3rd clutch drum * Heat-treated input shaft * 300M main shaft * 300M forward clutch hub * Updated molded steel direct clutch piston * Updated reverse band * New low roller assembly * Wide kickdown band with new apply piston * Heavy-duty intermediate sprag * Updated boost valve * Updated TCC regulator valve * Blueprinted pump and valve body * Transmission mount * New OEM steel pan

1.0 out of 5 stars ( 1 )

$7,845.00

BluePrint Engines GM 396 C.I.D. 530 HP Stroker Base Long Block Crate Engines

BluePrint Engines presents their all-forged small block Chevy-compatible engine, built for hard-hitting racing performance. Available carbureted or fuel injected, they are designed to handle extreme conditions and come packed with race-proven components. Select the best engine for your build. BluePrint Motorsports GM small block-compatible 396 cu. in. engines base-dressed crate engines will include either a Holley 950cfm double pumper carburetor with mechanical secondaries or a Holley Sniper 2 EFI self-tuning kit in chrome, along with the following: * BluePrint Engines aluminum intake manifold * BluePrint Engines valve covers * Moroso Street/Strip oil pan * HEI distributor * High-volume oil pump * Timing cover * Balancer Specifications and features for both carbureted and fuel injected engines: * 530 hp/480 lb.-ft. of torque * Compression ratio: 10.4:1 * Requires Race Fuel of 100+ octane * BluePrint Engines high-strength cast iron block -- Cylinders honed on computer-controlled machine to within .0002 straightness and roundness -- Cylinders are sonic tested for thickness -- Drilled and tapped for clutch linkage -- Align honed main bearing bore -- Mechanical fuel pump provision -- Passenger side dipstick -- One-piece rear main seal -- 4-bolt main -- 4.000 in. bore * Rotating assembly -- BluePrint forged crankshaft -- 3.875 in. stroke -- Forged I-beam 6.000 in. connecting rods -- BluePrint Engines forged 4032 pistons -- Internally balance front--externally balanced rear * BluePrint aluminum cylinder heads -- 64cc chamber -- 2.08 in. intake/1.60 in. exhaust valves -- 220cc intake/67cc exhaust runners * Hydraulic roller camshaft -- .638 intake/.622 exhaust lift -- 251 intake/259 exhaust duration at .050 in. -- 114-degree LSA * Ignition timing: 34 degrees total Note: BluePrint Motorsports engines are built for maximum performance and are intended for extreme duty applications. Because of the high-stress nature of their use, these engines are sold without any warranty, expressed, or implied.

Not Yet Reviewed

$8,299.00

Chevrolet Performance LSX Bowtie Engine Blocks

Chevrolet Performance LSX Bowtie engine blocks are designed for the advanced competition engine builder. They feature Siamese cylinder bores and a semi-finished deck height. The blocks can accept a maximum stroke of 4.250 in., a maximum bore of 4.250 in., and can support displacements of 454 cu. in. or more. LSX Bowties feature cast iron construction with an orange powdercoat finish. They accept all Gen III and IV LS-style cylinder heads, crankshafts, camshafts, and other components. Order the model with deck height and other options needed for your application. Additional features and specs include: * Front oil feed lines that can be plugged or restricted for mechanical flat tappet or mechanical lifter applications * Can be safely machined to 9.200 in. deck height * 1054 billet steel 6-bolt main bearing caps * 6-bolt cylinder head bolt pattern * Cam bores that can be machined to accept 60mm roller bearings * Can be machined for larger diameter lifters * External oil pump feed at the rear * Added 7th transmission bolt hole to work with early-style GM transmissions * Can accept a front motor plate for racing use * Threaded freeze plugs that can be used for external heaters or coolers * Windowed main bulkhead

5.0 out of 5 stars ( 1 )

$5,565.20

71 Results Found For "Racing"