Free Shipping on Orders Over $125 at Summit Racing

Ford Performance Parts 5.0L Coyote Power Module with T-56 Manual Transmission Combo Kits

Ford Performance Parts has the complete solution for your drivetrain upgrade needs with the 5.0L Coyote manual power module and T-56 manual transmission combo kit, which includes: * Gen 4X 5.0L Coyote crate engine * Tremec 6-speed manual transmission * Complete engine controller and wiring harness (control pack) It's Next Generation 5.0L power all in one complete powertrain kit. The crew at Ford Performance have spec'd out a kit to simplify the swap of the newest, most innovative 5.0L Coyote engine into just about any Ford vehicle. The Coyote power module teams the Gen 4X 5.0L Coyote V8 with a state-of-the-art Tremec 6-speed transmission, plus all the electronics and hardware to finish the installation. The engine features direct and port fuel injection, twin independent variable camshaft timing, and a lightweight plasma transferred wire arc spray aluminum engine block. Coyote power modules simplify both the shopping and build experience by kitting up the right parts that are matched to deliver potent performance with civilized drivability. The engine control pack is truly plug-and-play and simplifies conversions to a modern electronically fuel injected V8 high performance engine. Details and/or specs: * Gen 4X 5.0L Coyote engine * 460 hp at 7,000 rpm * 420 lbs.-ft. torque at 4,600 rpm * 12.0:1 compression ratio * Aluminum block * Boss 302 alternator kit * Starter and starter index plate * Control pack PCM and installation kit is tunable for power upgrades * Runs on pump gas * Steel Quicktime bellhousing * Roller pilot bearing * Tremec 6-speed transmission 2.66 1st gear * Clutch fork / throw-out bearing * Clutch kit * Billet flywheel * Installation hardware * Note: Engine will be fitted with an automatic flexplate. Included is a billet flywheel, to be installed on engine before installation into vehicle.

Not Yet Reviewed

$20,262.99

American Powertrain Tremec T-56 Magnum Manual Transmissions and Installation Kits

American Powertrain Tremec T-56 Magnum manual transmissions and installation kits are designed to withstand up to 700 lbs.-ft. of torque. Their gears feature substantially increased face widths and 2-piece laser-beam welded construction, allowing for greater control of the tooth angles, pitch, and alignment. The transmissions also include a bolstered one-piece countershaft to resist distortion, and a stronger input shaft. Magnum's new synchronizers are built with fine-tooth angles, redesigned shift forks—and an extensively modified transmission case to prevent leaks under high-stress conditions and increase overall power-handling capabilities. Nearly two dozen models are available; choose the kit recommended for your vehicle application. Kits include: * Cryo-hardened steel driveshaft slip yoke with 1330 style U-joint * Mechanical speedometer conversion * VSS wiring harness for electronic speedometer of EFI ECU * Reverse light wiring, weather seal harness, non-polar * Reverse lockout wiring harness * ISO-X ballistic, low-profile transmission mount * Steel roller pilot bearing * White shift knob with black 6-speed shift pattern

Not Yet Reviewed

$5,025.00

—

$5,025.95

BendPak Add-On Shared Column and Platform 2-Post Parking Lifts

The BendPak PL-6000DC is an add-on shared column and platform two-post parking lift specifically designed to accommodate the needs of real estate developers, architects, engineers, automotive dealers, and commercial parking operators. They can be ganged together with shared columns allowing you to fit more units into a smaller space. The PL-6000DC dual-column parking lift can accommodate a wide array of vehicles including SUVs, sedans, and sports cars and offers the perfect combination for both long-term and short-term parking. Typically, long-term parking is the upper level and short-term parking below. They can be installed inside a typical 8-foot parking space to accommodate most cars and light trucks and operate in both indoor and outdoor locations. Product specs and advantages: * Low operating cost—platform driven by gravity when lowered, no electric motor consumption is required * Designed for installation on typical parking surfaces—detailed installation manual is provided along with floorplan and foundation drawings and video attached with products will help customers have easier installation work * Ganged column design allows multiple installations in minimum space * Commercial grade design and construction—add-on column for PL-6000DC lifts; lifting capacity: 6,000 lbs. (2,722 kg) * Galvanized and corrugated anti-slip platform * Freestanding design when ganged two or wide * Overhead power unit provides smooth quiet hydraulic operation * Platform can be stopped at different heights to fit various vehicles and ceiling heights * Full-width channel-locked center panels protect lower vehicle * Wide deck platform accommodates pickups, vans, and cars * Dual direct-drive hydraulic cylinders * Automatic safety lock combined with anti-fall device to hold platform securely * Virtually maintenance-free composite carriage bearings * Electric key switch for security and safety * Automatic shut-off when operator releases key switch * Manual lock release available in case electricity failure (optional) * Hydraulic overloading protection * Photocell sensor prohibits lift to be lowered if vehicle is parked below Safety features: * Mechanical safety locks are spaced every 4 inches * 24 V operator controls and lock release * Photocell sensor prohibits lift to be lowered if vehicle is parked below * Electric protection for power overload or improper voltage * Automatic locking system during power outage * Emergency stop button * Upper limit switch * Pressure relief valve and pressure compensated flow control valve to ensure safe operation and level lifting * Industrial-grade hydraulic cylinders feature a single-piece, pilot fitted, machined steel piston, wrapped with specially designed, pressure loaded U-cup piston seals, backups, and wear bands to virtually eliminate fluid bypass Important Note: BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). The buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).

Not Yet Reviewed

$9,395.00

ATS Diesel Performance Stage 4 Automatic Transmission Packages

Engineering that works! ATS Diesel Performance Stage 4 transmission packages eliminate the factory weaknesses and design flaws. Your transmission is stout enough to handle stock power, but what happens when the power is modified and goes above and beyond? That's where ATS Stage 4 packages deliver. They're designed and built with innovative and durable components to give you an edge. All high-stress areas of the case are reinforced, and the external surfaces are sealed. Packages may feature: * Five Star billet torque converter * Viskus clutch drive—modified high performance clutch packs/bands and steels * Extra-deep finned transmission pan for added cooling * Billet 300M input shaft * Co-Pilot lockup controller * Billet flexplate

5.0 out of 5 stars ( 1 )

$7,014.99

—

$7,089.99

ATS Diesel Performance Stage 3 Automatic Transmission Packages

ATS Diesel Performance Stage 3 automatic transmission packages are designed to comprehensively address inherent weaknesses in stock versions—to produce strong, reliable transmissions for towing, daily driving, or racing. This is achieved by utilizing the ATS extra-deep, finned transmission pan for added cooling power, along with other key parts modified for high performance. Get all that modified power to the wheels with a transmission package that can handle it: ATS Diesel Performance Stage 3 automatic transmission packages. Order the model recommended for your specific vehicle and engine size. Features, items, and specs may include: * ATS formulated clutch material (bonded in-house to CNC laser-cut clutch steels) * Performance torque converter * 300M billet input shaft * Torrington bearing construction * Performance transmission pump * Modified high performance clutch packs/bands * Modified valve body focusing on precise shifts and increased line pressure/torque capacity * New bearings, seals, and gaskets * Co-Pilot transmission controller * 5-year / 500,000 mile warranty

Not Yet Reviewed

$6,554.99

—

$6,599.99

ATS Diesel Performance Stage 2 Transmission Packages

ATS Diesel Performance Stage 2 transmission packages eliminate the factory weaknesses and design flaws. Your transmission is stout enough to handle stock power, but what happens when the power is modified and goes above and beyond? Stage 2 packages deliver not only the ATS Five Star billet torque converters with patented Vikus clutch drives and deep pans, but also their revolutionary Co-Pilot electronic transmission controller or billet input shaft (depending on your application). All high-stress areas of the case are reinforced, and the external surface is sealed. Racer, puller, or long-hauler, ATS Diesel Stage 2 transmission packages will give you the edge.

1.0 out of 5 stars ( 1 )

$5,669.99

—

$5,939.99

ATS Diesel Performance Stage 6 Automatic Transmission Packages

ATS Diesel Performance Stage 6 automatic transmission packages are designed to comprehensively address inherent weaknesses in stock versions—to produce strong, reliable transmissions for towing, daily driving, or racing. This is achieved by utilizing the ATS extra-deep, finned transmission pan for added cooling power, along with other key parts modified for high performance. Get all that modified power to the wheels with a transmission package that can handle it: ATS Diesel Performance Stage 6 automatic transmission packages. Order the model recommended for your specific vehicle and engine size. Features, items, and specs may include: * ATS formulated clutch material (bonded in-house to CNC laser-cut clutch steels) * TripleLok or triple-patented Five Star torque converter (depending on application) * 300M billet shafts * Billet flex plate * Torrington bearing construction * Performance transmission pump * Modified high performance clutch packs/bands * Modified valve body focusing on precise shifts and increased line pressure/torque capacity * New bearings, seals, and gaskets * Co-Pilot transmission controller * 5-year/500,000 mile warranty

Not Yet Reviewed

$8,874.99

—

$9,239.99

ATS Diesel Performance Stage 5 Automatic Transmission Packages

ATS Diesel Performance Stage 5 automatic transmission packages are designed to comprehensively address inherent weaknesses in stock versions—to produce strong, reliable transmissions for towing, daily driving, or racing. This is achieved by utilizing the ATS extra-deep, finned transmission pan for added cooling power, along with other key parts modified for high performance. Get all that modified power to the wheels with a transmission package that can handle it: ATS Diesel Performance Stage 5 automatic transmission packages. Order the model recommended for your specific vehicle and engine size. Features, items, and specs may include: * ATS formulated clutch material (bonded in-house to CNC laser-cut clutch steels) * Performance torque converter * 300M billet input shaft * Billet flex plate * Torrington bearing construction * Performance transmission pump * Modified high performance clutch packs/bands * Modified valve body focusing on precise shifts and increased line pressure/torque capacity * New bearings, seals, and gaskets * Co-Pilot transmission controller * 5-year/500,000 mile warranty

Not Yet Reviewed

$7,879.99

VEGE Remanufactured Long Block Crate Engines

VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.

3.72 out of 5 stars ( 79 )

$5,045.99

9 Results Found For "Pilot"