12 Results Found For "JET"

Showing In Stock Items. Show All 21 Items.

Not Showing Customizable Items. View Customizable Items.

Individual Parts

Part Groups

Results 1 - 12 of 12

JET 10 in. x 18 in. Horizontal Band Saws

Set on a heavy-duty machined tabled bed to eliminate vibration, the JET 10 in. x 18 in. horizontal band saws deliver a precision cut—time after time. They feature a proprietary oversized chip tray design to minimize overspray and help reduce clean up. Coolant is distributed through the carbide blade guides. The blade is guarded, regardless of blade position, while a large hand wheel and built-in gauge provides easy blade tensioning. A quick-positioning vise with fully adjustable jaws swivels up to 45 degrees. The saws have an adjustable material stop and an automatic shut-off after every cut. JET 10 in. x 18 in. horizontal band saws' multiple operational features make this a highly desired piece of machinery for any shop.

Not Yet Reviewed

$6,819.00

Summit Bucks

Ford Performance Parts 572 C.I.D 655 HP Long Block Crate Engines

Big blocks are back! Ford Performance Parts 572 c.i.d. 655 hp long block crate engines are, once again, ready to make impressive power with excellent drivability—while utilizing premium, unleaded pump gas. They're available with front or rear sump pan. Specs for the Ford 572 c.i.d. long block crate engines: * 655 hp at 5,500 rpm * 710 lbs.-ft. torque at 4,500 rpm * Engine type: 385 Series big block * Bore x stroke: 4.500 in. bore x 4.500 in. stroke * Ford Performance A460 big block * Forged steel crankshaft * Forged steel H-beam connecting rods and bolts * Pistons with floating wrist pins * Hydraulic roller camshaft - Lift: .649 in. - Duration: Intake--259 degrees at .050 in. lift/exhaust--263 degrees at .050 in. lift * Ford Performance aluminum cylinder heads - Dual valve springs with damper - Stainless steel 2.20 in. diameter intake valves - Stainless steel 1.76 in. diameter exhaust valves * Compression ratio: 10.0:1 (nominal) * Required fuel: Premium unleaded * Stainless steel roller rockers * Multi-index timing chain set * Heavy-duty, aluminum body oil pump * SFI-approved vibration damper * Front or rear sump oil pan * Intake manifold * 870 cfm carburetor * Distributor * High performance water pump * Ford Performance Blue 9mm spark plug wires * Note: Built with current available parts

Not Yet Reviewed

$18,367.99

BendPak HD-9XW Standard Width Extra-Tall Lifts

The space saving design of the 9,000 lb. capacity BendPak HD-9XW is ideal for vehicle storage in residential garages or commercial buildings. It also happens to make a great service lift for smaller shops who still want to do a big business. These lifts are about the size of a typical parking space, helping to maximize floor space. The BendPak HD-9XW is great for storing ATVs, snowmobiles, jet skis, golf carts, boats or just about anything else that needs to be off the ground. You can finally make use of that wasted vertical space above your car. Additional features include the following: * 9,000 lbs. maximum lifting capacity * Freestanding design * Runways accommodate narrow and standard vehicles * Electric / hydraulic power system * Single hydraulic cylinder mounted underneath runway * Fully enclosed lifting cables, safety locks and sheaves * Internal anti-sway slider blocks in each column * Oversized self-lubricating cable rollers * Features heavy-duty 3/8 in. aircraft cable * Rugged 1 1/4 in. roller axles * Multi-position safety locks in each column * Adjustable lock ladders * Runways feature non-skid surface * Push-button pneumatic safety release * Independent backup slack-cable safety latches * Removable approach ramps for additional drive-under clearance

4.86 out of 5 stars ( 14 )

$6,495.00

Nitrous Express LT4 Supercharger Lid Nitrous Systems

Nitrous Express LT4 Supercharger lid nitrous systems replace your factory supercharger lid on GM LT4 Superchargers for a quick and clean install. The lids feature an improved airflow design that can increase up to 25 hp by itself, and increase power even more when your system is activated. Nitrous Express LT4 Supercharger lid systems are available as nitrous and nitrous/water methanol systems, with or without bottles. The nitrous spray bar system injects nitrous and fuel above each intake port, providing direct port-like distribution and ensuring maximum performance. Nitrous systems include: * Billet aluminum and carbon fiber lightning solenoids * Industry exclusive billet aluminum Lightning 500 bottle valve * Stainless steel braided lines * Stainless steel bottle brackets * Wiring, switches, and jetting for 100 to 300 wph Nitrous and water/methanol systems will also include: * Billet aluminum and carbon fiber lightning water/methanol solenoids * High-pressure electric pump * Stainless braided soft lines * Pre-bent stainless steel hard lines * Filtered nozzles * Plated fittings * Composite reservoir * Switches * NX Stage 2 digital progressive methanol controller

Not Yet Reviewed

$5,547.18

BendPak HD-9XL Extra-Wide Lifts

The BendPak HD-9XL 4-post lifts are about the size of a typical parking space, maximizing valuable floor space. These BendPak lifts are ideal for storing cars and trucks, ATVs, snowmobiles, jet skis, golf carts, boats, or anything else that needs to be up off the ground and safely in the air. If you've got at least a standard 8 ft. ceiling, you'll be able to make use of that wasted vertical space above your car. Trust in BendPak for all of your lifting needs. Additional features include the following: * 9,000 lb. maximum lifting capacity * Wide drive-thru with standard lift height and long runways * Electric/hydraulic power system * Internal "anti-sway" slider blocks in each column * Heavy-duty 3/8 in. aircraft cable * Multi-position safety locks in each column * Ramps feature non-skid surface * Runways include rail-kit for optional accessories * Single hydraulic cylinder underneath runway * Oversized self-lubricating cable rollers * Rugged 1 1/4 in. roller axles * Adjustable lock ladders * Push-button pneumatic safety release

4.33 out of 5 stars ( 3 )

$6,295.00

Nitrous Express Hellcat Billet Supercharger Lid Nitrous and Water/Methanol Systems

Nitrous Express has the upgrade your Hellcat wants! Their Billet Supercharger Lid for Hellcat/Demon applications replaces the factory supercharger lid for a quick and clean install. The improved airflow design of this new lid ensures maximum flow—and the placement of nitrous and water/methanol passages provides huge increases in horsepower and torque. The system does not have a spraybar, so nitrous and fuel are injected inline with the supercharger air discharge. This means the fuel/nitrous mixture is swept evenly to each runner. Nitrous/fuel passages are CNC-machined into the lid itself, so the spray pattern is in the perfect location every time. Injecting nitrous into this pre-intercooled hot air discharge super-cools the air charge, resulting in increased flow across the factory intercoolers for maximum power gains. Water/Methanol features: The Stage 2.5 uses the progressive VC-50 controller that proportionally injects more or less water/methanol, according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water/methanol—and allows cooling and performance improvements over a wide range for improved drivability. The Stage 2.5 Boost Cooler will make the induction charge colder, denser, and increase 91 octane fuel to 116 octane race gas levels, allowing full power all the time! The Water/Methanol system details: * VC-50 adjustable progressive water methanol controller * Digital boost reading (1-50 psi) * 100 percent methanol-resistant (stainless steel, nickel plating, hard anodizing, EPDM) * Snow Performance Hyper-Sonic water methanol nozzles (eight #2 nozzles) * Snow Performance ACU-SEAL water methanol compression fittings * Snow Performance OEM-approved Extreme Environment 300 psi UHO water methanol pump * Snow Performance Running "S" engraved low-profile nozzle holder * Snow Performance Running "S" engraved low-profile high-flow check valve The nitrous system includes: * Ready to bolt-on billet supercharger lid * Billet fuel line adapter * Lightning Series billet aluminum and carbon fiber nitrous and fuel solenoids * Stainless steel braided lines * All wiring, switches and mounting hardware * Jetting for 100, 150, 200, 250, and 300 hp * Systems with a bottle include stainless steel bottle brackets and industry exclusive Lightning 500 bottle valve

Not Yet Reviewed

$5,153.18

—

$5,976.79

Tuxedo TC-1300 Tire Changers

Tuxedo TC-1300 tire changers are what any high-end race shop needs. The TC-1300's low-profile arm is ideal for run flat and hard side wall tires and features a tilt back column to allow for extra room while working. Now you can change tires quickly with Tuxedo's top-quality tire changers! Product details of the TC-1300 tire changers: * Lever less design allows for user safety and convenience * Tilt back column leaves ample room for operation * Three function assist arm adds versatility in dismounting low-profile tires * Pneumatic locking hex shaft provides reliable and convenient functionality * Powerful dual bead blaster jets on all four clamps * Inflation hose and air gauge

Not Yet Reviewed

$6,446.99

Ranger RS-500DS Parts Washers

The Ranger RS-500DS parts washers are designed with professional-grade features, including dual water heaters, adjustable thermostat, automatic low-water shut-off, stainless steel oil skimmer, and more to demonstrate Ranger's commitment to enhanced performance and productivity. These stainless-steel spray wash cabinets rapidly degrease all of the dirty parts in your garage or shop. From larger truck and SUV engine components, to even your smallest nuts and bolts, the Ranger RS-500DS spray wash cabinets will make your car parts shine like new! Features and specifications: * 50-gallon tank with heavy-duty stainless steel construction * Powdercoat finish specifically designed to resist rust * Neoprene-sealed wash cabinet is sealed with a leak-proof neoprene door that creates an edge-to-edge seal and prevents water and steam from escaping—keeping steam inside creates a better water retention which improves cleaning efficiency * Centrifugal commercial-grade pump/motor combination—made of high-quality parts like the rust-resistant stainless steel impellers and screw nuts (pump and motor is over-designed to last) * Contamination-proof interior welds cover the full perimeter of the inside of the spray wash cabinet, perfectly sealing the wash are from the detergent tank, and preventing any potential cross contamination that could potentially cause clogging is redirected and filtered out, eliminating downtime, and helping to make maintenance a breeze * Heated cabinet with adjustable set point thermostat allows you to adjust the heating range up to 180 degrees F * Hot cleaning—a nickel-based, alloy-sheathed heater element is specifically designed for heated parts washing—ensures that your parts washer is hot and ready to go at the press of a button * High-power spray jets clean parts fast—attacks dirt and grime from all angles, ensuring an even powerful wash * Stainless steel nozzles are resistant to wear and clogging—sprayer nozzles have a sharply articulated spray grid to provide a powerful wash, blasting away dirt and grime * Full opening octagonal door and stainless steel handles * Dual water heaters for quick startup—water temperature is raised within seconds thanks to the dual water heaters that keep water primed and ready at all times * Automatic low water shutoff—switch is made from an industrial-grade stainless steel float located in the detergent tank that rises and falls with the water level * Stainless steel oil skimmer—separates oil and grime from the water which further increases the longevity of your detergent solution (oil is directed outside the cabinet into a holding container for disposal) * Removable parts tree and components basket is ideal for smaller cleaning components—instantly expands cabinet space and makes cleaning nuts, bolts, and screws as easy as placing them in the basket * Removable tank screen makes monthly maintenance easy, keeping your parts washer clean and ready to go * Moveable filter basket traps any particle larger than 1/8 in., so you can be sure that your tank water remains free of any build up that could cause harm * Heavy-duty non-marring casters are impervious to harsh conditions and roll smoothly without leaving any marks behind—the casters provide easy movement, giving you the freedom to reposition your parts washer anywhere with ease and have an easy lock and release system that allows you to place your parts washer anywhere in the garage or shop * Convenient drain tank—large built-in pipe drains that redirect and remove sludge from the parts washer floor, which helps keep the washer clean and functioning smoothly * Friction-drive turntable system provides the power behind the parts washer which helps to eliminate potential motor damage by reducing the risk of jamming components

Not Yet Reviewed

$14,895.00

Ranger RS-750DS Parts Washers

The Ranger RS-750DS parts washers have a 53-gallon tank and come with the latest features for rapidly degreasing the biggest car parts around—making it the ultimate answer to degreasing car parts of any shape or size. Built to last, these stainless steel spray wash cabinets allow for more space to fit more parts in at a time. With the extra room, you can clean and degrease automotive parts faster than ever before! Features and specs: * 53-gallon tank with heavy-duty stainless steel construction and powdercoat finish to resist rust * Commercial-grade pump/motor combination provides washing power—made of high-quality parts like the rust-resistant stainless steel impellers—while the centrifugal pump does all the heavy lifting (a protective covering comprised of 100 percent ductile cast iron and silicon carbide seals keep the machinery inside safe and dry) * Wash cabinet is sealed with a leak-proof neoprene door—creates an edge-to-edge seal and prevents water and steam from escaping to create better water retention which improves cleaning efficiency * Heated cabinet with adjustable set point thermostat allows you to adjust the heating range up to 175 degrees F * Safety switch and timer dial for a functional machine that is both safe and efficient * A nickel-based, alloy-sheathed heater element is specifically designed for heated parts washing—ensures that your parts washer is hot and ready to go at the press of a button * Contamination-proof interior welds prevents even microscopic debris from getting into the recirculating tank to help ensure nozzles and pumps remain unclogged, redirecting unwanted debris to the trap and filter * Stainless steel nozzles are resistant to wear and clogging—sprayer nozzles have a sharply articulated spray grid to provide a powerful wash, blasting away dirt and grime * Full opening octagonal door and stainless steel handles * Dual water heaters for quick startup—water temperature is raised within seconds thanks to the dual water heaters that keep water primed and ready at all times * High-power spray jets clean parts fast—attacks dirt and grime from all angles, ensuring an even powerful wash * Automatic low water shutoff feature cuts the power when the water level gets too low, saving your dual heaters from any potential damage—switch is made from an industrial-grade stainless steel float located in the detergent tank that rises and falls with the water level * Stainless steel oil skimmer—separates oil and grime from the water which further increases the longevity of your detergent solution (oil is directed outside the cabinet into a holding container for disposal) * Removable tree rack and components basket is essential for small parts and for maximizing parts washing space, the tree rack installs and removes easily instantly extending tank space and provides space for smaller parts like bolts, nuts, and screws * Convenient tank drain pipes help you maintain your spray wash cabinet by preventing debris from accumulating on the bottom * Moveable filter basket traps any particle larger than 1/8 in., so you can be sure that your tank water remains free of any build up that could cause harm and can be easily removed to gain access to the cleansing tank for maintenance * Non-marring casters make maneuvering even this bulky piece of equipment a breeze and the urethane casters ensure that your floor remains safe * Convenient drain tank—large built-in pipe drains that redirect and remove sludge from the parts washer floor, which helps keep the washer clean and functioning smoothly * A friction-drive turntable is the system behind the parts washer, and it cuts out the risk of motor damage by preventing jams that might otherwise occur within the cabinet and tank

Not Yet Reviewed

$15,895.00

Ridetech 1967-70 Mustang Coilover Suspension Systems

Ridetech 1967-70 Mustang coilover suspension systems allows you to give your vintage Pony modern drivability. The benefits of buying these complete kits is that Ridetech has done all the homework for you. They have matched the perfect spring rate and components for your Mustang's best performance and ride quality. All you do is install. Completely upgrade your existing suspension with Ridetech coilover suspension systems. Features include: * Upper Strongarms feature corrected ball joint angles for the tall spindles. The upper ball joint has been moved back to allow for additional caster setting to improve high-speed stability and steering feel. Billet cross shafts are included that feature a lowered mounting point to increase camber gain and correct suspension geometry. They house a stout double sheer lower shock mount. * Lower Strongarms feature a unique design that combines the control and strut rod into a stronger, more appealing one-piece design. Additional caster is designed into the arms and includes a robust bearing in an aluminum housing at the front mount to replace the soft factory rubber units. * HQ Series coilovers utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling. The rebound knob is located at the top of the shock for underhood access. * Front MUSCLEBar helps reduce body roll and includes the PosiLink end links that provide immediate engagement between the chassis and control arms. * Bolt-on 4-link greatly improves traction, handling, and ride quality

Not Yet Reviewed

$6,230.00

QA1 Level 2 Full Vehicle Handling Suspension Kits

QA1's handling suspension kits provide a full-vehicle upgrade that fits your needs. Available in three different levels of performance, you can build your car in stages, using QA1's parts list as a road map to get to the level of performance you want and have peace of mind knowing you won't have compatibility issues. Greater control and improved cornering are key benefits of QA1 Level 2 handling suspension kits. They're designed to boost performance and include a more extensive assembly of components than Level 1 kits. They offer easy bolt-on installation and full compatibility with the OEM parts you attach them to. All QA1 handling suspension kits are available with or without shocks and struts—giving you the flexibility to obtain the shocks or struts and spring rates you desire. Select the kit designed for your vehicle.

5.0 out of 5 stars ( 12 )

$6,531.95

—

$8,369.95

Chevrolet Performance Remanufactured Automatic Transmissions

Chevrolet Performance remanufactured automatic transmissions deliver dependable performance on a budget. These trannies feature quality components built to factory specifications that make your installation easy and the results satisfying. Remanufactured doesn't equate to lack of quality. Back your engine up with remanufactured automatic transmissions and receive the level of performance you expect from Chevrolet Performance.

Not Yet Reviewed

$6,447.35

Page 1 of 1