Free Shipping on Orders Over $125 at Summit Racing

BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block Crate Engines with Fuel Injection

BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block crate engines with fuel injection are offered in two models—one with new block casting, pulleys, and other extras. SPECIFICATIONS FOR BOTH MODELS INCLUDE: * HP and Torque: 390 hp / 410 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum Heads * Hydraulic Roller Cam * Cast Iron Crankshaft * Hypereutectic Pistons * BLOCK: NEW BluePrint Cast Iron Block Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Iron Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear engine balance * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 64cc chamber 2.02 in. intake/1.60 in. exhaust valves 195cc intake/75cc exhaust runners * CAM SPECS: Cam Type: Roller .495 Intake .502 Exhaust 220 Intake / 224 Exhaust duration @ .050 - 114 degree lobe separation * IGNITION TIMING: 32 Degrees Total at 3,500 rpm * ALSO INCLUDES: Valve covers Oil pan Timing cover Harmonic Balancer Thermostat and Water neck Aluminum intake HEI distributor Spark plugs and wires EFI system Dyno test results shipped with engine INCLUDED ONLY ON MODEL BP3505CTFD: * Standard rotation long water pump INCLUDED ONLY ON NEW BLOCK CASTING MODEL BP3505CTFK: * Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump (does not fit Corvette)

5.0 out of 5 stars ( 1 )

$7,399.00

—

$9,399.00

BluePrint Engines 350 C.I.D. Cruiser Fully Dressed Crate Engines with Fuel Injection

Complete your perfect build with a BluePrint 350 c.i.d. Cruiser fully dressed crate engine with fuel injection. The engine makes up to 18 in. of vacuum and works with power brakes, stock torque converter, stock gearing--and runs great on 87 octane fuel, which makes it excellent for daily drivers and cruising! Three models are available; compare options and select the engine that best fits your needs. Details and specs: * 341 hp / 371 lbs.-ft. * Compression ratio: 9.0:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front / external rear engine balance Cylinder Heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.02 in. intake / 1.60 in. exhaust valves * 195cc intake / 75cc exhaust runners Cam specs: * .477 intake / .471 exhaust * 202 intake / 212 exhaust duration @ .050 - 115-degree lobe separation Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Oil pan * Timing cover * Aluminum intake * HEI distributor * EFI system * Dyno test results shipped with engine

5.0 out of 5 stars ( 4 )

$6,799.00

—

$9,299.00

BluePrint Engines GM 383 C.I.D. 436 HP Dressed Stroker Long Blocks with Fuel Injection

BluePrint Engines GM 383 c.i.d. 436 hp dressed stroker long block crate engines with fuel injection will provide you a great foundation to return your vehicle to the performance level you desire. They feature a new one-piece rear main BluePrint engine block with 4-bolt mains and passenger side dipstick. Inside the block is a cast crankshaft and connecting rod rotating assembly, with 10.1:1 compression hypereutectic pistons hung on the end. The full roller camshaft provides .544 intake/555 exhaust Lift with 230 intake/236 exhaust Duration at .050 with a 110 degree lobe separation. Up top is a dual-plane intake manifold with Holley Sniper fuel injection system The engines also include an oil pan, a set of valve covers, and a timing cover to finish them off.

4.9 out of 5 stars ( 10 )

$7,799.00

—

$10,399.00

Modern Classic Series '62 Fuelie Intake Manifold Systems

Modern Classic Series '62 Chevy Fuelie intake manifold systems are designed to give your LS engine the look of GM's iconic Corvette "flat top" mechanical fuel injection system while using modern technology for ultimate performance. These systems are based on a cast-aluminum, two-piece manifold, just like the originals. These intake systems include billet aluminum fuel rails, all mounting hardware, and gaskets. These systems require GM LS3 OEM fuel injectors and a GM four-bolt, 92mm, drive-by-wire throttle body and are compatible with GM and aftermarket engine control units and harnesses that support both drive-by-wire and speed density tuning. Modern Classic Series '62 Fuelie intake manifold systems are available for rectangular or cathedral-port LS cylinder heads. Order the intake manifold system suited to fit your application.

Not Yet Reviewed

$5,153.95

BluePrint Motorsports Pro Series Chevy 632 C.I.D. 1015 HP Dressed Fuel Injected Long Block Engines

BluePrint's Pro Series based dressed GM big block compatible 632 c.i. fuel injected engines are capable of producing 1,015 hp and 830 lb.-ft. of torque. These long block crate engines are fitted with CNC-ported cylinder heads, a solid roller camshaft, forged pistons, and a forged steel crank. BluePrint Pro Series dressed 632s also include intake manifold, Sniper Stealth 4500, distributor, harmonic balancer, spark plug and wires, timing cover, and oil pan. Here's the specs: * Compression Ratio: 10.65:1 * BluePrint Engines high-strength cast iron block -- 4-bolt main -- 4.600 in. bore -- One-piece rear main seal * Rotating assembly -- Forged steel crankshaft -- 4.750 in. stroke -- 6.635 in. connecting rods -- Forged pistons -- Internally balanced front and rear * Cylinder heads -- 95cc chamber -- 440 intake runner -- 2.400 in. intake/1.800 in. exhaust valves * Solid roller camshaft -- .873 intake/.861 exhaust lift -- .293 intake/.304 exhaust duration -- at .050-115 degree lobe separation * Ignition timing controlled by ECU

Not Yet Reviewed

$29,899.00

BluePrint Builder Series LS376/530HP Standard Edition EFI Crate Engine and 4L65/70E Trans Combos

BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a black pulley kit and 4L65/70E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * New Cast Iron 6.2L * Main caps are 6-bolt * One-piece rear main seal * Reluctor wheel – 58x * Cam sensor – 4x (in timing cover) * Knock sensor provision on side Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Ignition Timing * Firing order is 1-8-7-2-6-5-4-3 Assembled 4-speed Transmission Package: * Complete 4L65/70E package with electronic transmission controller * Torque converter with 2,200–2,400 rpm stall * Non-weighted flexplate * Starter Other Components: * Holley Terminator X Max Gen IV complete EFI engine management system, and DBW (Drive-By-Wire) pedal kit * DBW throttle body * GM Muscle-car Swap oil pan * Loaded intake manifold * Fuel injectors (EV6 type) and rail * Coil packs * Spark plugs and wires * Water pump * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys * Champion 3015 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91 octane. Recommended oil is BPP710.

4.0 out of 5 stars ( 1 )

$23,499.00

Summit Bucks

Ford Performance Parts Megazilla Crate Engines

The Ford Performance Parts engine team has unleased the 7.3L Megazilla crate engine! The Megazilla features the Ford Performance 7.3L intake manifold, CNC-ported cylinder heads, forged pistons and connecting rods. The Megazilla crate engine cranks out 612 hp and 670 lbs.-ft. of torque in a streetable package running on premium pump gas. Megazilla crate engine features: * 7.3L displacement * 10.5:1 compression * (M-6049-SD73P/M-6050-SD73P) CNC-ported aluminum cylinder heads * (M-9424-73LP) low-profile intake manifold * (M-9926-M5292) 92mm throttle body * Mahle forged pistons * Callies H-beam forged connecting rods * (M-6303-SD73) production steel crankshaft * (M-6250-SD73A) hi-performance 7.3L camshaft w/ VCT delete * (M-6010-SD73) production cast iron block Peak power output (J607 standard): * 612 hp @ 5,580RPM * 670 lbs.-ft. of torque @ 3,920RPM * Over 500 lbs.-ft. of torque from 2,500 rpm to 6,000 rpm Assembly includes: * Coils/plug wires/spark plugs * Production oil pan * (M-6038-73) shipping/storage cradle * Production engine wiring harness Additional information: * Bellhousing bolt pattern same as the Ford 4.6/5.4 and Coyote 5.0L * For control packs, please refer to part number: M-6017-73M and M-6017-73A (sold separately) * Custom calibration required * For starter, please refer to part number: M-11000-SD73 (sold separately) * For FEAD, please refer to part number: M-8600-SD73 and M-8600-SD73AC (sold separately) This part is designed and intended for competition use only or off-highway use only. It should not be installed on a vehicle that is driven on public roads and highways. Installation of this part on a vehicle driven on public roads and highways is likely to violate U.S. and Canadian laws and regulations relating to motor vehicle emissions.

Not Yet Reviewed

$22,728.99

BluePrint Builder Series LS376/510HP Standard Edition EFI Crate Engine and TKX Transmission Combos

BluePrint Builder Series LS376/510HP Standard Edition EFI crate engine and TKX transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 510 horsepower, this standard edition builder series includes a polished pulley kit and T56 manual transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this engine assembly produces 440 lbs.-ft. of torque. When you need or want a new powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/510HP Standard Edition EFI crate engine and TKX trans combos. Product description and specifications: Block: * High strength cast iron (LSX Style) block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0662 in. Bore * 6-bolt main Rotating Assembly: * Nodular iron crankshaft * 3.622 in. stroke * 6.098 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Internally balanced front and rear Cylinder Heads: * BluePrint LS3 aluminum cylinder heads * 69cc chamber * 2.165 in. intake/1.590 in. exhaust valves * 259cc intake/102cc exhaust runners Cam Specs: * Hydraulic Roller Cam * 0.612 Intake/0.585 Exhaust Lift * 225 Intake/238 Exhaust duration * @.050-113 Degree Lobe Separation Ignition Timing: * Ignition Timing and Spark Advance are Controlled by BluePrint Engine Calibrated ECU * Transmission Controller Required if pairing to an automatic (ECU Does Not Offer Transmission Control) Other parts: * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS Swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and Fuel Rail Kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Notes: This engine requires a non-weighted flex plate such as (BPP12654640) / flywheel (BPPLS1611). Recommended fuel: 91 Octane. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The BluePrint Engines LS controller package contains a fully tested, calibrated, locked ECU, optimized for this specific engine. This package has undergone extensive testing for performance, reliability and the safety of you and your engine.

Not Yet Reviewed

$21,899.00

BluePrint Engines Pro Series Ford 427 C.I.D. 541 HP Dressed EFI Crate Engines

BluePrint Engines Pro Series Ford 427 c.i.d. dressed EFI crate engines can deliver 541 hp along with 519 lb.-ft. of torque for your build. These Ford small block-compatible Pro Series base dressed fuel injected long blocks are dyno testing before shipping, and will be accompanied by a comprehensive, dyno-generated printout showing the critical specs, eliminating the question of what your installed engine's real-world peak horsepower and torque ratings are. Specifications: * Compression ratio: 10.0:1 * Block: -- BluePrint Engines high-strength cast iron block -- 4-bolt main -- 4.125 in. bore -- 9.500 in. deck height -- One-piece rear main seal -- Passenger side dipstick * Rotating assembly: -- Forged crankshaft -- 4.000 in. stroke -- Forged 6.2 in. connecting rods -- Forged pistons -- Internally balanced front and rear * Aluminum cylinder heads: -- 62cc chamber -- 2.08 in. intake/1.60 in. exhaust valves -- 205cc intake/70cc exhaust runners * Hydraulic roller camshaft: -- .608 intake/.608 exhaust lift -- 248 degrees intake/258 degrees exhaust duration at .050 in. with 114-degree LSA * Also includes: -- Holley Sniper 2 EFI system -- Single plane intake manifold -- Pro Series distributor -- Valve covers -- Timing cover -- Front or rear sump oil pan -- Harmonic balancer -- Spark plugs and wires

Not Yet Reviewed

$17,399.00

Summit Bucks

Ford Performance Parts 2024 Gen 4 5.0L 480 HP Coyote Long Block Crate Engines

Ford Performance Parts 2024 Gen 4 5.0L 480 hp Coyote engines are the latest all-aluminum crate engines from the 2024 Mustang GT. These modern 5.0L 32-valve DOHC V8s use advanced features, such as direct and port fuel injection, twin independent variable camshaft timing (Ti-VCT), high-flow cylinder heads, dual throttle bodies, and a heightened compression ratio to deliver 480 hp and 415 lb.-ft. of torque (with premium fuel). These lightweight plasma-transferred wire-arc spray aluminum cylinder blocks feature cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength, and an optimized oil drain back and windage control to improve high-rpm performance. Available with production flexplate (automatic) or dual mass flywheel (manual) and both include engine harness. Engine specs: * 480 hp at 7,150 rpm * 415 lb.-ft. of torque at 4,900 rpm * 12.0:1 compression ratio * Bore 93mm x stroke 92.7mm * Hypereutectic aluminum pistons * Sintered steel connecting rods as used on BOSS 302 Mustang * Forged steel crankshaft * Aluminum block with plasma transferred wire arc spray weld liner coating * Longer, 12mm head bolts for higher clamp load * 9.5 qt capacity steel oil pan * Tuned composite intake manifold provides efficient air delivery and weight savings * Twin 80mm single bore drive-by-wire, electronic throttle bodies with variable runner control * High-flow aluminum cylinder heads, dual overhead camshaft (DOHC), four valves per cylinder, variable intake and exhaust camshaft timing * Engine mount bosses and bellhousing mount pattern common to 5.0L modular engines * Mustang GT 409 stainless steel tubular exhaust manifold on the RIGHT SIDE ONLY

5.0 out of 5 stars ( 1 )

$11,366.99

—

$11,701.99

BluePrint Builder Series LS427/585HP Standard Edition EFI Crate Engine and T56 Transmission Combos

The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a polished (or black) pulley kit and T56 manual transmission. The BluePrint aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged steel crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 trans combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged steel crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning.

Not Yet Reviewed

$26,499.00

Summit Bucks

Ford Performance Parts 5.0L Coyote Gen 4 Aluminator SC Crate Engines

Built for high performance applications, the Ford Performance 5.0L Coyote Gen 4 Aluminator SC crate engines are a powerhouse—ideal for custom race builds and 2024 GT Mustangs. While the Aluminator block, cylinder heads, oil pan, and intake manifold are factory pieces, Ford Performance replaces the hypereutectic pistons and sintered-steel rods with Mahle forged slugs, ARP 2000 rod bolts, and Manley forged H-beam rods, keeping the factory 12.0:1 compression ratio in naturally aspirated form and 9.5:1 on its boost-ready Aluminator crate. These flagship crates are quite popular with Ford diehards in the custom car and street rod world—because who really wants to put a Chevy LS in a deuce coupe? Crate engine features and specs: * Fits 2024+ Mustang GT * 5.0L (302 cubic inches) * 9.5:1 compression ratio (nominal) * Mahle hard anodized forged pistons with Grafal low friction coating * Manley H-beam connecting rods with ARP 2000 bolts * Forged steel crankshaft * Uses production 2024 Mustang GT aluminum block * 2024+ Production oil pan * Tuned composite Mustang GT intake manifold with production dual drive-by-wire 80mm throttle bodies with variable runner control * Four-valve-per-cylinder aluminum heads with roller-finger followers reduce friction. * Mustang GT production camshafts * Includes Ford Performance colder, heat range zero spark plugs (M-12405-M50A) * Includes Ford Performance oil filter (M-6731-FL820) * Includes billet steel gerotor oil pump gears (M-6600-M50A) * Vehicle harness and PCM not included * Does not include alternator (for alternator kit: refer to part numbers M-8600-M50BALT or M-8600-M50ALTA) * Engine mount bosses and bell housing mount pattern common to 4.6L modular engines * Does not include exhaust manifolds

Not Yet Reviewed

$14,826.99

BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block Crate Engines

BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block crate engines are available with fuel injection—and base or deluxe carbureted models. SPECIFICATIONS FOR ALL MODELS INCLUDE: * HP and Torque: 390 hp / 410 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum Heads * Hydraulic Roller Cam * Cast Iron Crankshaft * Hypereutectic Pistons * BLOCK: NEW BluePrint Cast Iron Block Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Iron Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear engine balance * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 64cc chamber 2.02 in. intake/1.60 in. exhaust valves 195cc intake/75cc exhaust runners * CAM SPECS: Cam Type: Roller .495 Intake .502 Exhaust 220 Intake / 224 Exhaust duration @ .050 - 114 degree lobe separation * IGNITION TIMING: 32 Degrees Total at 3,500 rpm * ALSO INCLUDES: Valve covers Oil pan Timing cover Aluminum intake HEI distributor Dyno test results shipped with engine 30 month / 50,000 warranty INCLUDED ONLY WITH FUEL INJECTION MODEL BP3505CTF: * EFI system INCLUDED ONLY WITH BASE CARBURETED MODEL BP3505CTC: * 670 cfm carburetor INCLUDED ONLY WITH DELUXE CARBURETED MODEL BP3505CTCD: * Harmonic balancer * Spark plugs * Spark plug wires * Standard Rotation Long Style Water Pump * Waterneck and Thermostat * Fuel Pump * 670 cfm carburetor

4.82 out of 5 stars ( 11 )

$5,899.00

—

$6,999.00

BluePrint Engines Ford 408 C.I.D. 450 HP EFI Stroker Engines

BluePrint Engines Ford 408 c.i.d. 450 HP EFI Stroker engines are complete long block dressed engine assemblies. They deliver 450 hp and 470 lbs.-ft. of torque. The engines feature a compression ratio of 10.0:1, aluminum heads, hydraulic roller cam, cast steel crankshaft, and forged pistons. Additional specifications: BLOCK: * Blueprint Engines high-strength block * Square and parallel decked * Line honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 straightness and roundness * Cylinders are sonic tested for thickness * 4-bolt mains ROTATING ASSEMBLY: * New cast steel crankshaft * 4.000 in. stroke * Forged I-Beam 6.123 in. connecting rods * Forged pistons * External 28 oz. balance front and rear CYLINDER HEADS: * BluePrint aluminum cylinder heads * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 90cc intake/65cc exhaust runners CAM SPECS: * Hydraulic roller camshaft * .579 Intake / .579 Exhaust * 236 Intake / 248 Exhaust duration at .050 - 114 degree lobe separation ALSO INCLUDES: * Intake manifold * Distributor * Complete Holley Sniper 2 EFI system * Oil pan, timing cover and valve covers * Dyno tested and shipped with results Note: Holley Sniper 2 EFI is NOT compatible with AOD trans. It does NOT have AOD kickdown lever.

Not Yet Reviewed

$9,799.00

BluePrint Engines GM 400 C.I.D. 500 HP Deluxe Dressed MPFI Long Block Crate Engines

BluePrint Engines 400 SBC-compatible performance crate engines are dyno tested with guaranteed power levels of 500 hp and 500 lb.-ft. of torque with a compression ratio of 10.3:1. These deluxe dressed, multi-port fuel injection systems, complete with ECU and full wiring harness, are specifically tuned and optimized engines that will perform well beyond most self-learn EFI systems available today. Designed for hassle-free start up and operation, they are available with or without a polished or black finish pulley kit. Select the 400 SBC-compatible performance crate engine desired for your build. Specs and features: * BluePrint Engines high-strength cast iron block -- Drilled and tapped for clutch linkage -- One-piece rear main seal -- 4-bolt main -- 4.125 in. bore * Rotating assembly: -- BluePrint forged crankshaft -- 3.750 in. stroke -- 5.700 in. connecting rods -- BluePrint forged pistons -- Internally balanced front, externally balanced rear * BluePrint Performance aluminum cylinder heads: -- 64cc chamber -- 2.08 in. intake/1.600 in. exhaust valves -- 220cc intake/65cc exhaust runners * BluePrint hydraulic roller camshaft: -- .553 intake/.576 exhaust lift -- 236 intake/242 exhaust duration at .050 -- 110-degree lobe separation * Ignition timing: -- Computer controlled by BluePrint ECU * Additional components: -- BluePrint multi-port fuel injection--self-learning electronic control unit -- Single plane machined aluminum intake manifold -- Polished chrome "BluePrint" engraved valve covers -- Polished chrome BluePrint air cleaner -- Satin aluminum water pump -- Spark plugs and wires -- Harmonic balancer -- Timing cover -- Distributor -- Oil pan * Polished or black front accessory drive (depending on kit selected): -- Reverse rotation short water pump -- Type II power steering pump -- Remote power steering pump reservoir -- 140-amp one-wire alternator -- 7B10 peanut-style air conditioning compressor

Not Yet Reviewed

$11,699.00

BluePrint Engines Ford 302 C.I.D. 370 HP Dressed Long Block Crate Engines

BluePrint Engines Ford 302 c.i.d. 370 hp dressed long block crate engines feature hand-picked seasoned blocks, align-honed main bearing bore, and cylinders honed on computer-controlled machines to within .0002 straightness/roundness—and sonic tested for thickness. Key features: * 2-bolt main * 1-piece rear main seal * Mechanical fuel pump provision * Upgraded 5.090 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * BluePrint aluminum cylinder heads with 60cc chambers * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners * Hydraulic roller camshaft: .543 intake/.554 exhaust lift, 218/226 duration at .050 with 112-degree lobe separation * Timing: 10-16 degrees initial, 32-34 total * 600cfm carburetor or Sniper EFI system * Dual plane, satin aluminum intake manifold * Distributor * Valve covers * Timing cover * 50 oz. 6.4 in. diameter harmonic balancer * Dyno test results shipped with engine * Painted Ford blue

Not Yet Reviewed

$8,451.43

BluePrint Builder Series 427W/541HP Cobra Edition EFI Crate Engine and TKX Transmission Combos

BluePrint Cobra Edition Builder Series combos pair engine and transmission, eliminating guesswork, making it easier to gain the performance you desire. These combos match a fuel injected Ford small block-compatible 427 c.i.d. engine with a TKX manual transmission enabling the production of 541 hp and 519 lb.-ft. of torque with a compression ratio of 10:1. BluePrint high-strength cast iron engine block: * 4.125 in. bore * 4-bolt main * One-piece rear main seal * 9.500 deck height Rotating assembly: * Forged crankshaft * Stroke: 4.000 in. * Forged 6.250 in. connecting rods * Forged pistons * Internally balanced Aluminum cylinder heads: * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 205cc intake/70cc exhaust runners Hydraulic roller camshaft: * .608 in. intake/.608 in. exhaust valve lift * 248 intake/258 exhaust duration at .050 in. of lift * 114 degrees lobe separation angle (LSA) TKX transmission package: * Mcleod Super Street Pro single disc clutch * Hydraulic throwout bearing * Steel bellhousing * Billet flywheel * Starter -- First gear ratio: 2.87:1 -- Second gear ratio: 1.89:1 -- Third gear ratio: 1.28:1 -- Fourth gear ratio: 1.00:1 -- Fifth gear ratio: 0.81:1 Also included: * Ribbed Cobra-style aluminum valve covers * Holley Sniper 2 EFI system * Aluminum oval air cleaner with Cobra Script * Harmonic balancer * Thermostat and thermostat housing * EFI fuel pump kit * Timing cover * Oil filter * Powdercoated oil pan * Spark plugs and wires * Plug wire separators * Polished front accessory drive: -- Driver side standard rotation water pump -- Type II power steering pump -- Remote power steering pump reservoir -- 140-amp one-wire alternator -- 7B10 peanut air conditioning compressor

Not Yet Reviewed

$28,499.00

BluePrint Builder Series LS376/510HP Standard Edition EFI Crate Engine and ZF 8HP70 Trans Combos

The BluePrint Builder Series LS376/510 hp Standard Edition EFI crate engine and ZF 8HP70 trans combo is a complete, modern LS-based engine and advanced 8-speed automatic transmission package, perfect for resto-mods. It offers 510 hp, quick shifting (200ms), and a turnkey solution with integrated Holley EFI, electronics, and accessories—designed for high performance and easy installation in classic cars. * Engine details (LS376/510 hp): -- Type: GM LS-vompatible376 cu, in. (6.2L) -- Power: 510 hp / 440 lbs.-ft. torque -- Block: High-strength cast iron LSX-style block -- Heads: BluePrint LS3 aluminum heads -- Internals: Hydraulic roller cam, hypereutectic pistons, nodular iron crankshaft -- Fueling: Holley Terminator X Max EFI system, LS3 cast intake, drive-by-wire throttle body, injectors * Transmission details (ZF 8HP70): -- Type: Sophisticated 8-speed automatic -- Performance: Lightning-fast appx. 200ms shift times, wide gear ratio for strong acceleration -- Control: Integrated controller pre-programmed for simple plug-and-play with the engine's ECU -- Benefit: Modern, dual-clutch-like feel with traditional automatic comfort and lightweight internals * Package features (Builder Series): -- Turnkey: Engine and transmission come assembled, saving time and complexity -- Accessories: Includes black pulley kit, water pump, alternator, etc. (some configurations) -- Electronics: Complete harness, ECU, and drive-by-wire pedal -- Ideal for: * Pro-Touring builds, Resto-mods, high performance street machines * Swaps needing modern power and efficiency without the hassle of sourcing individual components

Not Yet Reviewed

$19,999.00

BluePrint Builder Series LS427/605HP Standard Edition EFI Crate Engine and 4L65/70E Trans Combos

The BluePrint Builder Series LS427/605 hp Standard Edition EFI crate engine and 4L65/70E trans combo is a complete, ready-to-install engine and automatic transmission package for classic cars and hot rods. It features a powerful 427 cu. in. GM LS-style engine making around 605 hp with EFI—paired with a robust 4L65/70E automatic transmission, electronic controller, torque converter, and accessories for a simplified drivetrain swap. This kit takes the guesswork out of matching components, offering a high performance, dyno-tested solution with forged internals, aluminum heads, and modern fuel injection. * Engine details (LS427/605 hp): -- Displacement: 427 cu. in. (7.0L) -- Horsepower/Torque: Around 605 hp / 565 lbs.-ft. -- Block: BluePrint's high-strength cast iron LS-style block with enhanced strength -- Rotating assembly: Forged crankshaft, forged connecting rods, forged pistons for durability -- Cylinder heads: BluePrint aluminum heads with large intake/exhaust runners -- Camshaft: Hydraulic roller cam -- Fuel system: Complete electronic fuel injection (EFI) system, often with Holley's Terminator X -- Compression ratio: 11:1 * Transmission details (4L65/70E): -- Type: Heavy-duty automatic transmission (4L65E or 4L70E) -- Controller: Includes an electronic transmission controller for proper shifting -- Torque converter: Comes with a matching torque converter (around 2,200-2,400 rpm stall) -- Flexplate: Non-weighted flexplate installed * Package benefits: -- Complete drivetrain: Comes fully assembled and bolted together -- Simplified installation: Designed as a plug-and-play solution for swaps -- Dyno tested: Engine performance is verified on a dyno, with results provided -- Includes accessories: Often includes front accessories (alternator, power steering pump) and a swap-ready oil pan

Not Yet Reviewed

$27,199.00

Nitrous Express LT4 Supercharger Lid Nitrous Systems

Nitrous Express LT4 Supercharger lid nitrous systems replace your factory supercharger lid on GM LT4 Superchargers for a quick and clean install. The lids feature an improved airflow design that can increase up to 25 hp by itself, and increase power even more when your system is activated. Nitrous Express LT4 Supercharger lid systems are available as nitrous and nitrous/water methanol systems, with or without bottles. The nitrous spray bar system injects nitrous and fuel above each intake port, providing direct port-like distribution and ensuring maximum performance. Nitrous systems include: * Billet aluminum and carbon fiber lightning solenoids * Industry exclusive billet aluminum Lightning 500 bottle valve * Stainless steel braided lines * Stainless steel bottle brackets * Wiring, switches, and jetting for 100 to 300 wph Nitrous and water/methanol systems will also include: * Billet aluminum and carbon fiber lightning water/methanol solenoids * High-pressure electric pump * Stainless braided soft lines * Pre-bent stainless steel hard lines * Filtered nozzles * Plated fittings * Composite reservoir * Switches * NX Stage 2 digital progressive methanol controller

Not Yet Reviewed

$5,547.18

Summit Bucks

Ford Performance Parts 5.0L Coyote Gen 4X Crate Engines

Ford Performance Parts 5.0L Coyote Gen 4X crate engines are modern 5.0L 32-valve DOHC V8s that utilize advanced features, such as direct and port fuel injection, twin independent variable camshaft timing (Ti-VCT), high-flow aluminum cylinder heads, and 12:1 compression to deliver 460 hp and 420 lb.-ft. of torque (with premium fuel). The all-aluminum cylinder block features plasma transferred arc spray-in liners, cross-bolted main bearing caps, and thick main bearing bulkheads for strength. Ford's Gen 4X 5.0L Coyote features a single 80mm throttle body for easier packaging in various applications. Features and specs: * Hypereutectic aluminum pistons * Sintered steel connecting rods as used on the Boss 302 Mustang * Forged steel crankshaft * Single 80mm "drive-by-wire" throttle body * 9.5 qt. steel oil pan * Composite lightweight intake manifold * Mustang GT 409 stainless steel exhaust manifold—right side only * Engine mount bosses and bellhousing mount pattern common to 5.0L modular engines * 10R80 flexplate included * Engine weight: 445 lbs. without front accessory drive components Note: Driver side exhaust flange utilizes 5.2L pattern

Not Yet Reviewed

$11,704.99

ATK High Performance Chevy LQ4 6.0L 460 HP Long Block Crate Engines

ATK High Performance Chevy LQ4 6.0L 460 hp long block crate engines lay down impressive power that can be run with factory fuel injection or retrofitted with a carburetor. They're hand-built, balanced, and blueprinted using top-quality parts. Don't waste time trying to salvage a high-mileage short block when you can get a fresh mill that's ready for your choice of components to make it your own. ATK Chevy LQ4 6.0L 460 hp long block crate engines include: * Handpicked and seasoned 6-bolt main block * Aligned and honed main bores * OE steel crankshaft * 3.622 in. stroke * OE connecting rods * Hypereutectic dish top pistons * Aluminum cylinder heads * Hydraulic roller camshaft * Timing chain and gear set * 1.7:1 ratio rocker arms * 24-tooth reluctor

4.4 out of 5 stars ( 10 )

$5,049.99

Summit Bucks

Ford Performance Parts 2024 7.3L Super Duty Long Block Crate Engine

Ford Performance Parts 7.3L V8 Ford gasoline crate engine from the 2024 F250 Super Duty is loaded with great features for your build. Features: * 7.3L displacement * Bore 107.2mm x stroke 101.0mm * 430 hp at 5,500 rpm * 485 lb.-ft. of torque at 4,000 rpm * 10.5:1 compression * Cast iron block * Aluminum cylinder heads * Intake valve diameter 55.13mm * Exhaust valve diameter 42.53mm * Lift (intake/exhaust) 13.67mm/15.26mm * Cam-in-block OHV design with variable cam timing * Forged steel crankshaft * Cast aluminum pistons * Port fuel injection * Firing order: 1-5-4-8-6-3-7-2 Each engine assembly includes: * Composite intake manifold * 87mm throttle body * Left and right exhaust manifolds * 8-qt. aluminum oil pan/cooler * Ignition coils and wires * Production flexplate * Factory lift brackets * M-6038-73 shipping and storage cradle * Bellhousing bolt pattern same as 4.6/5.4 and 5.0 Coyote * Engine weight: 580 lbs.

Not Yet Reviewed

$8,797.99

Summit Bucks

Chevrolet Performance CPP LT1 6.2L Long Block Crate Engines

Chevrolet Performance CPP LT1 6.2L long block crate engines were introduced on the seventh-generation Corvette Stingray, and opened the next chapter in the long, historic legacy of small block engines. Architecturally similar to the LS family of engines, these LT1 engines feature a unique block casting, cylinder head design, oiling system and more. They're offered with a wet-sump or dry-sump oiling system. Chevrolet Performance CPP LT1 6.2L long block crate engine features and specs: * Engine type: Direct injection spark ignition Gen V small block V8 * Displacement: 376 c.i.d. * Bore x stroke: 4.065 x 3.622 (103.25 x 92mm) * Block: Cast aluminum with 6-bolt nodular iron main bearing caps * Crankshaft: Forged steel * Connecting rods: Forged powdered metal * Pistons: Hypereutectic aluminum * Camshaft type: Billet steel roller * Valve lift: .561 intake/.531 exhaust * Camshaft duration (@ 0.050 in.): 242 degrees intake/244 degrees exhaust * Cylinder heads: Aluminum, rectangular port * Valve size: 2.130 intake/1.590 exhaust * Compression ratio: 11.5:1 * Rocker arms: Investment-cast roller trunnion * Rocker arm ratio: 1.81:1 * Recommended fuel: Premium pump * Maximum recommended rpm: 6600 * Reluctor wheel: 58X * Balanced: Internal

Not Yet Reviewed

$10,641.52

68 Results Found For "Injection"