Free Shipping on Orders Over $125 at Summit Racing

Scott's Hot Rods IFS Packages

Scott's Hot Rods IFS packages are the ultimate improvement to the ride quality and handling of your classic vehicle. Starting with a ground-up, clean-sheet design, these independent front suspension kits are custom-fit to your specific chassis. Optimized steering and suspension geometry provide modern handling, while adding the convenience and feedback of rack-and-pinion steering. Designed and fabricated in-house ensures precise, accurate fitment. These IFS packages are available in a wide array of ride heights, suspension options, brake configurations, and even wheel bolt patterns! Features include: * Stock, mild, or low ride height configurations * One-piece, boxed steel crossmember construction * Frame/chassis-specific frame notches and reinforcement plates * Fully adjustable, tubular upper and lower control arms * Oversized serviceable ball joints * Built-in anti-dive geometry * Rack and pinion steering * Forged steel spindles (stock or drop-height options) * Available with Wilwood brake packages in multiple color choices * Available air bag and multi-level coilover suspension options

5.0 out of 5 stars ( 4 )

$5,069.99

—

$6,468.99

Magnuson Magnum TVS2650 Supercharger Kits

Magnuson TVS2650 supercharger kits make power you can live with! Magnuson's powertrain integration technology offers you the ability to have big horsepower and drivability in the same supercharger. The TVS2650 system was developed to be a direct bolt on kit with minimal downtime, and straightforward installation. An enthusiast with basic tools can install the system in a weekend, or about a day for an experienced installer. The supercharger itself is maintenance free- pre-filled and sealed, nothing to check or top off for the lifetime of the engine. Magnuson only uses the highest quality components in their supercharger kits. Everything you need to supercharger your application is included, right down to detailed step-by-step installation instructions. Order yours today and unleash the power of a Magnuson Supercharger!

5.0 out of 5 stars ( 1 )

$7,395.00

BluePrint Engines Pro Series Chevy 502 C.I.D. 627 HP Dressed Long Block Crate Engines

Blueprint Pro Series is for those wanting maximum horsepower and durability. BluePrint Engines Pro Series Chevy 502 c.i.d. 627 hp dressed long block crate engines offer any custom builder, hot rodder, or kit car builder an engine that has been fully dyno tested, passed vigorous inspections, and is ready to power up your project. Blueprint's Pro Series 502 big block GM-style engines are dressed with carburetor, aluminum heads, forged pistons, forged crankshaft, and a hydraulic roller cam. Additional features: * Standard deck with 4-bolt main * Forged H-beam connecting rods * Cylinder head specs: -- 119cc chamber -- 2.30 in. intake / 1.88 in. exhaust valves -- 316cc intake / 124cc exhaust runners * Camshaft specs: -- .647 intake / .647 exhaust -- 248 intake / 254 exhaust duration -- at .050 - 112 degree lobe separation * Dyno test results shipped with engine

4.5 out of 5 stars ( 2 )

$12,399.00

BluePrint Engines GM 496 C.I.D. 600 HP Stroker Dressed Carbureted Long Block Crate Engines

Give your ride a new breath of life with BluePrint Engines GM 496 c.i.d. 600 hp stroker dressed carbureted long block crate engines with aluminum heads. These engines crank out an incredible 600 hp and 568 ft.-lbs. of tire-shredding torque. Each engine is hand-built and balanced to provide you with a powerful mill that is sure to kick some fresh life into your project car or hot rod. Block: * Cast iron 454 big block * Cylinders honed to within .0002 straightness and roundness * Cylinders are sonic-tested for thickness * 4.250 in. stroke, bored .060 in. over * Standard deck Rotating assembly: * Forged steel crankshaft * OEM-type connecting rods with 150,000 psi rod bolts * Hypereutectic pistons, 10.1 to 1 Compression ratio * Hydraulic roller camshaft Additional features: * Aluminum cylinder heads * 850 cfm carburetor * Aluminum intake manifold * Valve covers, oil pan * 30-month/50,000-mile warranty * Dyno test results shipped with engine

5.0 out of 5 stars ( 3 )

$11,699.00

BluePrint Engines GM 383 C.I.D. Stroker Short Block Plus Engines

BluePrint Engines GM 383 c.i.d. short block plus stroker engines are always balanced and ready for you to finish assemble. Whether you're building a kit car, race car, hot rod, or just a sweet old memory, BluePrint Engines are ready to add a lot of muscle to your fun! Block details: * 4-bolt main * Passenger side dipstick * Cylinder wall thickness "sonic-tested" * Cylinders computer-honed to tolerance of .0002 in. Rotating assembly details: * Crankshaft * Pistons * Connecting rods * Moly rings * High-volume oil pump * Heavy-duty single roller timing set * Harmonic balancer * Hydraulic roller camshaft and lifters * Oil pan * Brass freeze plugs

4.56 out of 5 stars ( 9 )

$5,999.00

Magnuson Magnum MP90 Supercharger Kits

Thanks to its positive-displacement roots-type design, the Magnuson Magnum MP90 delivers immediate throttle response with zero turbo lag and torque that's ready when you are, from off-idle through the entire rev range. Designed for daily dependability and hard use alike, this system integrates a large liquid-to-air intercooler, front-mounted heat exchanger, and electric water pump to keep intake temps down and performance consistent, even under heavy load or hot weather. Whether you're crawling at Moab or hauling on the jobsite, the MP90 is built to keep pace. Magnuson's engineers developed this system to meet the same quality and durability standards as OEM components. The supercharger, intake manifold, and intercooler are integrated into a single sealed unit, minimizing leak points, reducing install time, and requiring zero maintenance. It's pre-filled, factory sealed, and ready to run out of the box. Installation is straightforward, a pro can handle it in a day, and a skilled enthusiast can complete it over a weekend. The included 50-state-legal calibration is delivered via a plug-and-play handheld programmer, tuned for both daily drivability and maximum power gains.

4.0 out of 5 stars ( 2 )

$6,395.00

Fleece Performance Freedom Series LSR Aluminum Engine Blocks

Fleece Performance Freedom Series LSR is a premium aluminum Gen IV LS standard deck race block designed for high performance applications. Cast from a proprietary 356 T-6 aluminum ingot, the Freedom Series LSR engine blocks are engineered with precision and designed for durability to deliver unmatched strength and compatibility with OEM LS accessories. Reinforced from top to bottom, the blocks are built for maximum performance with added features, like cross bracing in the lifter valley, maximized crankshaft saddle radius, and a 40 percent larger footprint for the main cap contact surface to the skirt wall. Whether you're upgrading for competitive racing or seeking peak performance, the Fleece Performance Freedom Series of engine blocks ensure reliability and excellence in every detail, making them a perfect choice for serious enthusiasts and professionals alike. Features: * Cross-braced lifter valley: -- Provides added structural integrity and individual drain backs for improved reliability * Heavy-duty deck thickness: -- A robust 0.750 in. deck thickness for enhanced durability * Enhanced design: -- Additional stock to the front and rear valley walls for increased strength -- A minimum 0.625 in. skirt wall thickness -- Complete reinforced exoskeleton combined with Hot Isostatic Pressing (HIP) ensures the highest quality casting available * Billet main caps: -- Billet construction ensures stability and precision fitment -- Utilizes 8740 alloy M10 main studs and side bolts along with dowels on the inner studs of the block for superior clamping and reliability -- Exclusive domed main cap design provides maximum crankshaft support * Maximized crankshaft saddle radius: -- Optimized for performance under high-stress conditions * Lightweight: -- Weighs only 120 lbs. with main caps -- Strong yet lightweight solution * Priority oil system: -- Oil rifling provides priority oil feed to critical bottom-end components -- Reduces heat, wear, and risk of failure * Ductile iron sleeves: -- Durable wear-resistant surface with improved shock absorption Engine block is shipped with: * Durabond GMP-9 cam bearings * LSR rear cover, rear cover gasket, and hardware * Plug kit * Precision ground 1018/1020 steel cam thrust plate * Transmission dowel pins * Oil galley barbell plug * Rear main seal

Not Yet Reviewed

$6,750.00

BluePrint Motorsports Pro Series Chevy 632 C.I.D. 815 HP Fully Dressed Long Block Crate Engines

Blueprint Pro Series is for those wanting maximum horsepower and durability. BluePrint Engines Pro Series Chevy 632 c.i.d. 815 hp fully dressed long block crate engines offer any custom builder, hot rodder, or kit car builder an engine that's been fully dyno tested, passed vigorous inspections, and is ready to power up your project. Blueprint's Pro Series 632 Stroker GM-style drop-in ready engines are dressed with aluminum heads, forged pistons, forged crankshaft, a hydraulic roller cam, and complete front accessory drive system with a polished or black finish (your choice). Additional features: * Tall deck with 4-bolt main (approximately .400 taller/wider than OEM block) * Forged H-beam connecting rods * Cylinder head specs: -- 119cc chamber -- 2.30 in. intake / 1.88 in. exhaust valves -- 358cc intake / 125cc exhaust runners * Camshaft specs: -- .698 intake / .698 exhaust -- 272 intake / 282 exhaust duration -- at .050 - 110-degree lobe separation * Installed accessory drive with A/C, P/S, alternator, water pump, belts, and pulleys * Dyno test results shipped with engine

Not Yet Reviewed

$19,799.00

—

$22,199.00

Fleece Performance Freedom Series LTR Aluminum Engine Blocks

Fleece Performance Freedom Series LTR is a premium aluminum Gen V LT standard deck race block designed for high performance applications. Cast from a proprietary 356 T-6 aluminum ingot, the Freedom Series LTR engine blocks are engineered with precision and designed for durability to deliver unmatched strength and compatibility with OEM LT accessories. Reinforced from top to bottom, the blocks are built for maximum performance with added features, like cross bracing in the lifter valley, maximized crankshaft saddle radius, and a 40 percent larger footprint for the main cap contact surface to the skirt wall. Whether you're upgrading for competitive racing or seeking peak performance, the Fleece Performance Freedom Series of engine blocks ensure reliability and excellence in every detail, making them a perfect choice for serious enthusiasts and professionals alike. Features: * Cross-braced lifter valley: -- Provides added structural integrity and individual drain backs for improved reliability * Heavy-duty deck thickness: -- A robust 0.750 in. deck thickness for enhanced durability * Enhanced design: -- Additional stock to the front and rear valley walls for increased strength -- Minimum 0.625 in. skirt wall thickness -- Complete reinforced exoskeleton combined with Hot Isostatic Pressing (HIP) ensures the highest quality casting available * Billet main caps: -- Billet construction ensures stability and precision fitment -- Utilizes 8740 alloy M10 main studs and side bolts along with dowels on the inner studs of the block for superior clamping and reliability -- Exclusive domed main cap design provides maximum crankshaft support * Maximized crankshaft saddle radius: -- Optimized for performance under high-stress conditions * Lightweight: -- Weighs only 120 lbs. with main caps -- Strong yet lightweight solution * Priority oil system: -- Oil rifling provides priority oil feed to critical bottom-end components -- Reduces heat, wear, and risk of failure * Ductile iron sleeves: -- Durable wear-resistant surface with improved shock absorption Engine block is shipped with: * Durabond GMP-9 cam bearings * LTR rear cover, rear cover gasket, and hardware * Plug kit * Precision ground 1018/1020 steel cam thrust plate * Transmission dowel pins * Oil galley barbell plug * Rear main seal

Not Yet Reviewed

$6,750.00

Summit Bucks

Edelbrock E-Force Universal Supercharger Systems for Engine Swaps

Edelbrock E-Force universal supercharger systems are designed for engine swaps into street rods and muscle cars. They feature 12 in. long runners for maximum low-end torque and great drivability. They're capable of an incredible 600+ flywheel horsepower and 550+ lbs.-ft. of torque. If you're looking for a supercharger system for your hot rod to provide instantly reliable horsepower with low boost for minimum stress on your engine, look no further than an Edelbrock E-Force universal supercharger system—exactly what you need for your engine swap project. Order the model recommended for your year/make and engine application. Edelbrock E-Force universal supercharger systems include the following components: * Supercharger manifold assembly * Cast aluminum tensioner/idler bracket * Cast aluminum engine valley tray * Heavy-duty automatic belt tensioner * Dual, high-capacity, bar and plate, intercoolers * High-flow 95mm mass airflow sensor housing * Extruded aluminum fuel rails with -6 AN lines * Custom-molded intercooler hoses with quick-connect fittings * Electric intercooler water pump * Intercooler recovery tank * Fuel injectors * Steel idler pulleys with heavy-duty, high-speed bearings * High-flow conical air filter * Edelbrock aluminum engine covers * Plug and play, electrical harness, installation hardware * 3.5 in. supercharger pulley

Not Yet Reviewed

$7,400.95

—

$8,766.95

ATK High Performance Chevy LQ4 6.0L 505 HP Long Block Crate Engines

ATK High Performance Chevy LQ4 6.0L 505 hp long block crate engines are designed to be a performance upgrade for LS-based vehicles or perfect for a 2001-07 Chevy Truck LQ4 or LS swap in a hot rod. Expect big mid- to upper-end power, with a noticeable idle. (For optimal performance, you'll need headers, chassis dyno tune, and 36 lb. injectors. Engine specifications: * Horsepower: 505 * Torque: 480 * Block: OE LQ4/6.0L Iron * Bore/Stroke: Up to 4.040 in. x 3.622 in. * Displacement (cu.in.): Up to 371 * Crankshaft: OE GM 24-tooth reluctor wheel * Rods: OE powder metal or stock GM * Pistons: Hypereutectic 10:1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: Custom performance grind * Timing chain: OE single roller * Cylinder heads: OE cathedral port aluminum 71cc/210cc 2.00/1.55 * Rocker arms: 1.7 ratio * Oil pump: Melling STD volume * Engine info: -- Oil: Conventional / Non-Synthetic 10W30 -- Oil Filter: Wix or K&N -- Timing: Set to factory specifications via PCM module -- Spark Plug Gap: .040 in. -- Firing Order: 18726543 -- Octane: 91+ -- Stall Converter: 1800+ -- Exhaust: 1 5/8 + Headers (Per application – Larger diameter will make more power) * NOTES: This engine replaces the 2001-07 Chevy 6.0L LQ4 engine. ECM MUST BE TUNED; not doing so can damage the engine. A PCV valve must be run. You must also run an air-oil separator system such as the Moroso 85487 to capture the excess crankcase vapors LS engines are known for. If you are not running a MAP sensor, the MAP timing option in the timing control box must be zeroed out all the way across. Failure to do so will allow the controller to add timing which can lead to detonation. You must also run some sort of a steam line kit that dumps to your water pump, radiator or radiator hose; ATK recommends a 4-corner setup like the Trick Flow TFS-306SB601. This allows air pockets/hot spots to escape the heads and can also be used to purge out trapped air when filling the radiator for the first time.

3.0 out of 5 stars ( 2 )

$5,198.99

BluePrint Engines Pro Series Chevy 598 C.I.D. 724 HP Fully Dressed Long Block Crate Engines

Blueprint Pro Series is for those wanting maximum horsepower and durability. BluePrint Engines Pro Series Chevy 598 c.i.d. 724 hp fully dressed long block crate engines offer any custom builder, hot rodder, or kit car builder an engine that has been fully dyno tested, passed vigorous inspections--and is ready to power up your project. Blueprint's Pro Series 598 Stroker GM-style drop-in ready engines are dressed with aluminum heads, forged pistons, forged crankshaft, a hydraulic roller cam, and a complete front accessory drive system with a polished or black finish (your choice). Additional features: * Standard deck with 4-bolt main * Forged H-beam connecting rods * Cylinder head specs: -- 119cc chamber -- 2.30 in. intake / 1.88 in. exhaust valves -- 358cc intake / 125cc exhaust runners * Camshaft specs: -- .647 intake / .647 exhaust -- 258 intake / 266 exhaust duration -- at .050 - 112-degree lobe separation * Installed accessory drive with A/C, P/S, alternator, water pump, belts, and pulleys * Dyno test results shipped with engine

Not Yet Reviewed

$17,199.00

Nitrous Express Hellcat Billet Supercharger Lid Nitrous and Water/Methanol Systems

Nitrous Express has the upgrade your Hellcat wants! Their Billet Supercharger Lid for Hellcat/Demon applications replaces the factory supercharger lid for a quick and clean install. The improved airflow design of this new lid ensures maximum flow—and the placement of nitrous and water/methanol passages provides huge increases in horsepower and torque. The system does not have a spraybar, so nitrous and fuel are injected inline with the supercharger air discharge. This means the fuel/nitrous mixture is swept evenly to each runner. Nitrous/fuel passages are CNC-machined into the lid itself, so the spray pattern is in the perfect location every time. Injecting nitrous into this pre-intercooled hot air discharge super-cools the air charge, resulting in increased flow across the factory intercoolers for maximum power gains. Water/Methanol features: The Stage 2.5 uses the progressive VC-50 controller that proportionally injects more or less water/methanol, according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water/methanol—and allows cooling and performance improvements over a wide range for improved drivability. The Stage 2.5 Boost Cooler will make the induction charge colder, denser, and increase 91 octane fuel to 116 octane race gas levels, allowing full power all the time! The Water/Methanol system details: * VC-50 adjustable progressive water methanol controller * Digital boost reading (1-50 psi) * 100 percent methanol-resistant (stainless steel, nickel plating, hard anodizing, EPDM) * Snow Performance Hyper-Sonic water methanol nozzles (eight #2 nozzles) * Snow Performance ACU-SEAL water methanol compression fittings * Snow Performance OEM-approved Extreme Environment 300 psi UHO water methanol pump * Snow Performance Running "S" engraved low-profile nozzle holder * Snow Performance Running "S" engraved low-profile high-flow check valve The nitrous system includes: * Ready to bolt-on billet supercharger lid * Billet fuel line adapter * Lightning Series billet aluminum and carbon fiber nitrous and fuel solenoids * Stainless steel braided lines * All wiring, switches and mounting hardware * Jetting for 100, 150, 200, 250, and 300 hp * Systems with a bottle include stainless steel bottle brackets and industry exclusive Lightning 500 bottle valve

Not Yet Reviewed

$5,153.18

—

$5,976.79

Roush 2021-25 5.0L F-150 Phase 1 Supercharger Kits

Roush 2021-25 5.0L F-150 Phase 1 supercharger kits provide instant throttle response and can generate increased power through the engine's entire powerband. They utilize the 2.65L R2650 TVS supercharger, adding an additional 305 hp over stock, boosting power output to 705 hp and 635 lb.-ft. torque! As always, this power comes with peace of mind. This Roush Performance system is backed by their in-house 3-year/36,000-mile limited powertrain warranty when installed by a certified ASE technician. The roots-type positive displacement supercharger with twin 4-lobe rotors that are twisted 170 degrees offers a long list of benefits including, greatly enhanced thermal efficiency, higher volumetric capacity, higher operating speeds, a smoother, more efficient flow of air into the engine, and improved noise and vibration characteristics. Roush supercharger kits have completed hot development trips to validate cooling performance, AC performance, and towing capability. Over 900 hours of dyno engine durability and testing were completed to validate the supercharger and meet Roush Performance's engine durability requirements. Key features and benefits: * Billet aluminum viscous crankshaft damper developed by Roush engineers to reduce the increased torsional inputs needed to handle the increased power level, improving durability and longevity of supercharger * Uniquely developed spark plugs, optimized for forced induction application * 107 percent larger LTR surface area for increased cooling (2 times larger than the previous Roush low-temperature radiator) * Retains all factory driving modes * 3-year/36,000-mile Limited Powertrain Warranty included when installed by Ford dealer or an Automotive Service Excellence-certified technician * Includes all necessary installation hardware * Roush Performance calibration included (to be downloaded using the Roush RDT software) * Calibration optimized for 93 octane fuel (premium fuel recommended, compatible with 91 octane) * Roush calibration removes the cylinder deactivation feature (Variable Displacement Engine)

Not Yet Reviewed

$8,899.99

Lincoln Electric Precision TIG 275 Welders

Lincoln Electric Precision TIG 275 welders feature patented Micro-Start II Technology and Lincoln Electric's AC Auto Balance on-board, which deliver unrivaled starting and welding at low amperages and improved AC aluminum welding performance. New features, simple controls, innovative accessory storage, and attractive and consistent welds--they all add up. Whatever the TIG welding application--fabrication, aerospace, production, motorsports, or vocational education--choose the Precision TIG® 275 welders for outstanding features and precise arc performance. Their redesigned controls are simple and well-spaced for effortless setting changes, and their hidden menu button features up to 7 programmable parameters without cluttering the control panel (requires optional Advanced Process Panel, sold separately). The Auto Balance has been readjusted to have more penetration and improved bead appearance. Additional features include: * 115 V auxiliary power receptacles for powering an optional water cooler or power tools * Built-in storage compartment for torch consumables * Water-cooled torch connections with no adapters required--side mounted, out of the way, and well protected * Neat/organized cable management with integrated torch holster * Selectable welding modes such as high frequency, scratch start, and Touch Start TIG * Higher duty cycles--275A at 40 percent duty cycle * Widest welding range in its class, 2-340 amps for both AC and DC * Excellent stick welder--even with Fleetweld 5P with Automatic Hot Start and Auto Adaptive Arc Force controls (requires optional Advanced Process Panel, sold separately) * Fan-As-Needed (FAN) prevents overheating. FAN reduces power consumption, noise, motor wear, and dust in the machine * CSA C/US-certified

Not Yet Reviewed

$7,569.99

Hughes Performance Muscle Car Transmission Packages

Hughes Performance Muscle car transmission packages are designed and built to give customers the option to choose the transmission and converter package best suited for their needs. The transmission packages come complete with everything you need—transmission, converter, transmission cooler, transmission fluid, and more. So, whether you have a radical cam in your hot rod, or need to haul or tow a heavy load, Hughes Performance offers high-quality transmission packages to match your application needs. Note: Contents of kits vary based on transmission type and your vehicle.

5.0 out of 5 stars ( 1 )

$5,061.99

BluePrint Builder Series LS427/605HP Standard Edition EFI Crate Engine and 4L65/70E Trans Combos

The BluePrint Builder Series LS427/605 hp Standard Edition EFI crate engine and 4L65/70E trans combo is a complete, ready-to-install engine and automatic transmission package for classic cars and hot rods. It features a powerful 427 cu. in. GM LS-style engine making around 605 hp with EFI—paired with a robust 4L65/70E automatic transmission, electronic controller, torque converter, and accessories for a simplified drivetrain swap. This kit takes the guesswork out of matching components, offering a high performance, dyno-tested solution with forged internals, aluminum heads, and modern fuel injection. * Engine details (LS427/605 hp): -- Displacement: 427 cu. in. (7.0L) -- Horsepower/Torque: Around 605 hp / 565 lbs.-ft. -- Block: BluePrint's high-strength cast iron LS-style block with enhanced strength -- Rotating assembly: Forged crankshaft, forged connecting rods, forged pistons for durability -- Cylinder heads: BluePrint aluminum heads with large intake/exhaust runners -- Camshaft: Hydraulic roller cam -- Fuel system: Complete electronic fuel injection (EFI) system, often with Holley's Terminator X -- Compression ratio: 11:1 * Transmission details (4L65/70E): -- Type: Heavy-duty automatic transmission (4L65E or 4L70E) -- Controller: Includes an electronic transmission controller for proper shifting -- Torque converter: Comes with a matching torque converter (around 2,200-2,400 rpm stall) -- Flexplate: Non-weighted flexplate installed * Package benefits: -- Complete drivetrain: Comes fully assembled and bolted together -- Simplified installation: Designed as a plug-and-play solution for swaps -- Dyno tested: Engine performance is verified on a dyno, with results provided -- Includes accessories: Often includes front accessories (alternator, power steering pump) and a swap-ready oil pan

Not Yet Reviewed

$27,199.00

Ranger RS-500DS Parts Washers

The Ranger RS-500DS parts washers are designed with professional-grade features, including dual water heaters, adjustable thermostat, automatic low-water shut-off, stainless steel oil skimmer, and more to demonstrate Ranger's commitment to enhanced performance and productivity. These stainless-steel spray wash cabinets rapidly degrease all of the dirty parts in your garage or shop. From larger truck and SUV engine components, to even your smallest nuts and bolts, the Ranger RS-500DS spray wash cabinets will make your car parts shine like new! Features and specifications: * 50-gallon tank with heavy-duty stainless steel construction * Powdercoat finish specifically designed to resist rust * Neoprene-sealed wash cabinet is sealed with a leak-proof neoprene door that creates an edge-to-edge seal and prevents water and steam from escaping—keeping steam inside creates a better water retention which improves cleaning efficiency * Centrifugal commercial-grade pump/motor combination—made of high-quality parts like the rust-resistant stainless steel impellers and screw nuts (pump and motor is over-designed to last) * Contamination-proof interior welds cover the full perimeter of the inside of the spray wash cabinet, perfectly sealing the wash are from the detergent tank, and preventing any potential cross contamination that could potentially cause clogging is redirected and filtered out, eliminating downtime, and helping to make maintenance a breeze * Heated cabinet with adjustable set point thermostat allows you to adjust the heating range up to 180 degrees F * Hot cleaning—a nickel-based, alloy-sheathed heater element is specifically designed for heated parts washing—ensures that your parts washer is hot and ready to go at the press of a button * High-power spray jets clean parts fast—attacks dirt and grime from all angles, ensuring an even powerful wash * Stainless steel nozzles are resistant to wear and clogging—sprayer nozzles have a sharply articulated spray grid to provide a powerful wash, blasting away dirt and grime * Full opening octagonal door and stainless steel handles * Dual water heaters for quick startup—water temperature is raised within seconds thanks to the dual water heaters that keep water primed and ready at all times * Automatic low water shutoff—switch is made from an industrial-grade stainless steel float located in the detergent tank that rises and falls with the water level * Stainless steel oil skimmer—separates oil and grime from the water which further increases the longevity of your detergent solution (oil is directed outside the cabinet into a holding container for disposal) * Removable parts tree and components basket is ideal for smaller cleaning components—instantly expands cabinet space and makes cleaning nuts, bolts, and screws as easy as placing them in the basket * Removable tank screen makes monthly maintenance easy, keeping your parts washer clean and ready to go * Moveable filter basket traps any particle larger than 1/8 in., so you can be sure that your tank water remains free of any build up that could cause harm * Heavy-duty non-marring casters are impervious to harsh conditions and roll smoothly without leaving any marks behind—the casters provide easy movement, giving you the freedom to reposition your parts washer anywhere with ease and have an easy lock and release system that allows you to place your parts washer anywhere in the garage or shop * Convenient drain tank—large built-in pipe drains that redirect and remove sludge from the parts washer floor, which helps keep the washer clean and functioning smoothly * Friction-drive turntable system provides the power behind the parts washer which helps to eliminate potential motor damage by reducing the risk of jamming components

Not Yet Reviewed

$14,895.00

Ranger RS-750DS Parts Washers

The Ranger RS-750DS parts washers have a 53-gallon tank and come with the latest features for rapidly degreasing the biggest car parts around—making it the ultimate answer to degreasing car parts of any shape or size. Built to last, these stainless steel spray wash cabinets allow for more space to fit more parts in at a time. With the extra room, you can clean and degrease automotive parts faster than ever before! Features and specs: * 53-gallon tank with heavy-duty stainless steel construction and powdercoat finish to resist rust * Commercial-grade pump/motor combination provides washing power—made of high-quality parts like the rust-resistant stainless steel impellers—while the centrifugal pump does all the heavy lifting (a protective covering comprised of 100 percent ductile cast iron and silicon carbide seals keep the machinery inside safe and dry) * Wash cabinet is sealed with a leak-proof neoprene door—creates an edge-to-edge seal and prevents water and steam from escaping to create better water retention which improves cleaning efficiency * Heated cabinet with adjustable set point thermostat allows you to adjust the heating range up to 175 degrees F * Safety switch and timer dial for a functional machine that is both safe and efficient * A nickel-based, alloy-sheathed heater element is specifically designed for heated parts washing—ensures that your parts washer is hot and ready to go at the press of a button * Contamination-proof interior welds prevents even microscopic debris from getting into the recirculating tank to help ensure nozzles and pumps remain unclogged, redirecting unwanted debris to the trap and filter * Stainless steel nozzles are resistant to wear and clogging—sprayer nozzles have a sharply articulated spray grid to provide a powerful wash, blasting away dirt and grime * Full opening octagonal door and stainless steel handles * Dual water heaters for quick startup—water temperature is raised within seconds thanks to the dual water heaters that keep water primed and ready at all times * High-power spray jets clean parts fast—attacks dirt and grime from all angles, ensuring an even powerful wash * Automatic low water shutoff feature cuts the power when the water level gets too low, saving your dual heaters from any potential damage—switch is made from an industrial-grade stainless steel float located in the detergent tank that rises and falls with the water level * Stainless steel oil skimmer—separates oil and grime from the water which further increases the longevity of your detergent solution (oil is directed outside the cabinet into a holding container for disposal) * Removable tree rack and components basket is essential for small parts and for maximizing parts washing space, the tree rack installs and removes easily instantly extending tank space and provides space for smaller parts like bolts, nuts, and screws * Convenient tank drain pipes help you maintain your spray wash cabinet by preventing debris from accumulating on the bottom * Moveable filter basket traps any particle larger than 1/8 in., so you can be sure that your tank water remains free of any build up that could cause harm and can be easily removed to gain access to the cleansing tank for maintenance * Non-marring casters make maneuvering even this bulky piece of equipment a breeze and the urethane casters ensure that your floor remains safe * Convenient drain tank—large built-in pipe drains that redirect and remove sludge from the parts washer floor, which helps keep the washer clean and functioning smoothly * A friction-drive turntable is the system behind the parts washer, and it cuts out the risk of motor damage by preventing jams that might otherwise occur within the cabinet and tank

Not Yet Reviewed

$15,895.00

BendPak Autostacker PL-6SRX Extra-Wide Parking Lifts

Meet the BendPak Autostacker PL-6SRX, an extra-wide parking lift version of the world's best fully collapsible parking lift. They are the ideal home car lift for tight spaces and garages and also allow homeowners to maintain a clean, modern, and sophisticated look to their garages. Like BendPak's standard-width parking lift model, this extra-wide edition offers a safe, easy way to store two vehicles in a single parking space. Additionally, the PL-6SRX lifts offer a more spacious environment for vehicle loading on the top-level platform. Lower-level vehicles will pull into an equally roomy parking space that is protected by Autostacker's scissor superstructures. Many people who are car collectors are not mechanics, so home parking lifts need to be easy to use. With BendPak's Autostacker PL-6SRX, there are no cables to replace or maintain, and that means zero scheduled maintenance issues, which is a money saver. Key features and specs: * 6,000 lb. lifting capacity * Extra-wide construction for increased door clearance * Key-switch disconnect fully disables operation for enhanced security * Audible alarm and warning buzzer alerts operator and bystanders when the lift is in operation * Accommodates cars, light trucks, and SUVs * Rugged, welded-steel construction is strong and durable * 100 percent hot-dipped, galvanized steel platform * Attractive slate gray, baked-on powder coat finish provides added toughness * Front wheel dish acts as a wheel chock to prevent vehicles from rolling forward or backward * Extra-wide, gradual sloping platform reduces entry ramp height * Automatic safety locks engage at five different parking heights * Simple push-button controls * Dual, direct-drive hydraulic lifting cylinders * Dependable hydraulic circuit that provides precise, equalized lifting * Variable height parking accommodates a wide range of vehicle and ceiling heights * Contoured scissor legs provide rigidity, decreased deflection, and a low collapsed height * Full-width, straight-through axles increase overall stability and tracking through the vertical travel range * Full-width pivot pins promote straighter tracking of the scissor legs throughout travel—vital for eccentric loads * Extra-wide, heavy-duty steel scissor arms with cross member bracing enhance stability * Unique clevis-design scissor ends lower stress and increase rigidity by distributing loads symmetrically over the pins * Patented asymmetric scissor arms provide greater underside door clearance * Patented door-sentry car door protectors are made from energy-absorbing rubber to protect against accidental scratches or door dings * Space-saving design is perfect for commercial or residential applications * Hydraulic safety valves (velocity fuses) prevent sudden, unexpected platform collapse in the unlikely event of hydraulic system failure * UL Listed: electrical components meet National Electrical Code (NEC) requirements

Not Yet Reviewed

$14,195.00

20 Results Found For "Hot"